Search NASA⌕ Search

SEARCH · Search NASA

Results for “REFRACTORY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Kink bands promote exceptional fracture resistance in a NbTaTiHf refractory medium-entropy alloy

Single-phase body-centered cubic (bcc) refractory medium- or high-entropy alloys can retain compressive strength at elevated temperatures but suffer from extremely low tensile ductility and fracture toughness. We examined the strength and fracture toughness of a bcc refractory alloy, NbTaTiHf, from 77 to 1473 kelvin. This alloy’s behavior differed from that of comparable systems by having fracture toughness over 253 MPa·m 1/2 , which we attribute to a dynamic competition between screw and edge dislocations in controlling the plasticity at a crack tip. Whereas the glide and intersection of screw and mixed dislocations promotes strain hardening controlling uniform deformation, the coordinated slip of <111> edge dislocations with {110} and {112} glide planes prolongs nonuniform strain through formation of kink bands. These bands suppress strain hardening by reorienting microscale bands of the crystal along directions of higher resolved shear stress and continually nucleate to accommodate localized strain and distribute damage away from a crack tip.

36 MATERIALS SCIENCE↗

Refractory Glass Seals for SOFC

One of the critical challenges facing planar solid oxide fuel cell (SOFC) technology is the need for reliable sealing technology. Seals must exhibit long-term stability and mechanical integrity in the high temperature SOFC environment during normal and transient operation. Several different approaches for sealing SOFC stacks are under development, including glass or glass-ceramic seals, metallic brazes, and compressive seals. Among glass seals, rigid glass-ceramics, self-healing glass, and composite glass approaches have been investigated under the SECA Core Technology Program. The U.S. Department of Energy's Pacific Northwest National Laboratory (PNNL) has developed the refractory glass approach in light of the fact that higher sealing temperatures (e.g., 930-1000 degrees C) may enhance the ultimate in-service bulk strength and electrical conductivity of contact materials, as well as the bonding strength between contact materials and adjacent SOFC components, such as interconnect coatings and electrodes. This report summarizes the thermal, chemical, mechanical, and electrical properties of the refractory sealing glass.

30 DIRECT ENERGY CONVERSION↗

Computational Capabilities for Predictions of Interactions at the Grain Boundary of Refractory Alloys

New high performance refractory alloys are critically required for improving efficiency and decreasing CO 2 emissions of fossil energy systems. The development of these materials remains slow because it is driven by a trial-and-error experimental approach and lacks a rational design approach. Atomistic Molecular Dynamic (MD) design has the potential to accelerate this development through the prediction of mechanical properties and corrosion resistance of new materials. The success of MD simulations depends critically on the fidelity of interatomic potentials. This project, in collaboration with Penn State, has focused on developing and validating high quality quantum mechanics based reactive potentials, ReaxFF, for Ni-Fe-Al-Cr-O-S system. A larger number of accurate density functional theory (DFT) calculations were performed to generate data for parameterizing the ReaxFF potentials. These potentials were then used in molecular dynamics (MD) and molecular dynamics-Monte Carlo (MD-MC) for much larger system to study for which DFT calculation would be prohibitively expensive, and to understand a number of chemical phenomena Ni-Fe-Al-Cr-O-S based alloy systems . These include catalytic oxidation of butane on clean Cr 2 O 3 and pyrite/Cr 2 O 3 , interfacial reaction between Cr 2 O 3 (refractory material) and Al 2 O 3 (slag), cohesive strength of at the grain boundary of S-enriched Cr compared to bulk Cr and Ssegregation study in Al, Al 2 O 3 , Cr and Cr 2 O 3 with a grain structure. The developed quantum based ReaxFF potential are available from the authors upon request. During this project, a number of papers were published in peer-reviewed journals. In addition, several conference presentations were made.

01 COAL, LIGNITE, AND PEAT↗

Computational Capabilities for Predictions of Interactions at the Grain Boundary of Refractory Alloys

New high performance refractory alloys are critically required for improving efficiency and decreasing CO 2 emissions of fossil energy systems. The development of these materials remains slow because it is driven by a trial-and-error experimental approach and lacks a rational design approach. Atomistic Molecular Dynamic (MD) design has the potential to accelerate this development through the prediction of mechanical properties and corrosion resistance of new materials. The success of MD simulations depends critically on the fidelity of interatomic potentials. This project, in collaboration with Penn State, has focused on developing and validating high quality quantum mechanics based reactive potentials, ReaxFF, for Ni-Fe-Al-Cr-O-S system. A larger number of accurate density functional theory (DFT) calculations were performed to generate data for parameterizing the ReaxFF potentials. These potentials were then used in molecular dynamics (MD) and molecular dynamics-Monte Carlo (MD-MC) for much larger system to study for which DFT calculation would be prohibitively expensive, and to understand a number of chemical phenomena Ni-Fe-Al-Cr-O-S based alloy systems . These include catalytic oxidation of butane on clean Cr 2 O 3 and pyrite/Cr 2 O 3 , interfacial reaction between Cr 2 O 3 (refractory material) and Al 2 O 3 (slag), cohesive strength of at the grain boundary of S-enriched Cr compared to bulk Cr and Ssegregation study in Al, Al 2 O 3 , Cr and Cr 2 O 3 with a grain structure. The developed quantum based ReaxFF potential are available from the authors upon request. During this project, a number of papers were published in peer-reviewed journals. In addition, several conference presentations were made.

36 MATERIALS SCIENCE↗

K-3 Refractory Corrosion and Sulfate Solubility Model Enhancement (Final Report)

As higher waste loading LAW glasses are formulated, sulfate solubility and K-3 refractory corrosion are two properties that become increasingly constraining; however, WTP baseline models were not developed for these properties. In previous work for ORP, VSL/Atkins developed preliminary glass property-composition models that relate LAW glass composition to these two essential properties to support the implementation of the higher waste loading LAW glass formulations at the WTP. The development of the initial LAW glass property-composition models for K-3 refractory corrosion and sulfate solubility was completed in 2015. The present work scope focused on enhancement of these models and included augmentation of property-composition datasets for these two properties with newly available data, review of the updated datasets, and development of enhanced models.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Status of Additive Manufacturing Capabilities for Processing Refractory Alloys Under the Mo-99 Program

The enriched 100 Mo target, denoted as aMo, that Northstar Medical Radioisotopes is developing to produce 99 Mo from an accelerator-based method is a disk-type geometry with a 0.5–0.715 mm thickness and a 29 mm outer diameter. A press and sinter method was adopted to fabricate these samples from aMo powder feedstock. Inherent porosity from the press and sinter method makes the disks more easily dissolvable during 99 Mo postprocessing. However, the disk-type geometry will be subject to thermal stresses due to temperature variations once the geometry is in line with the accelerated electron beam, causing warping and possible failure. Additive manufacturing (AM) processes such as laser powder bed fusion (LPBF) enable the manufacturing of custom, complex geometries that may otherwise be difficult to produce with more conventional methods (e.g., press and sinter approach). Therefore, the National Nuclear Security Administration’s Molybdenum-99 Program invested in developing an AM facility dedicated to processing and printing refractory powders. This report details the LPBF process, how irregular refractory powder can be prepared for LPBF, and the equipment that is available to support the program.

36 MATERIALS SCIENCE↗

High temperature thick film sensor development based on doped lanthanum chromites refractory semiconductors materials

High temperature advanced sensing materials have generated high demand due the high accuracy temperature measurements requirements for process optimization, controlling and sensing. Some technological applications of harsh conditions sensing include monitoring tiles of space shuttles, rotating bearings in aircraft engines, turbines, jet engines dynamics and chemical reactors. High temperature conditions limit the sensing strategies, where typically traditional metal thermocouples are unstable, and the sensing options are limited to optical spectroscopy methods. Recently, refractory semiconductors thick- and thin-film thermocouples have been developed and, in many cases, preferred over conventional metallic thermocouples due their spatial resolution, and capability of direct deposition on any surface. Rare earth chromites ceramics materials, exhibit some properties of interest for high temperature sensing technologies development, such as: high microstructure and sintering stability, excellent conductive behavior at high temperatures, and matching thermal expansion coefficients relative to other conductors and refractory ceramics. In this work, high performance ultra-high temperature thermocouples using p-type and n-type doped lanthanum chromites materials were fabricated and tested at temperatures up to 1500 o C. Thermoelectric voltage, Seebeck Coefficients were established for all devices, evidencing high stability and performance in prolongated operational time and harsh conditions.

20 FOSSIL-FUELED POWER PLANTS↗

K-3 Refractory Corrosion Test Results, HAL24M2

This report summarizes the refractory corrosion data of the high-Al matrix of Direct Feed High-Level Waste (DFHLW) glasses generated to expand glass compositional ranges. Design of a 20 high-Al glass matrix, HAL24M2, was reported in Russell et al. (2025, in progress). The HAL24M2 glasses were tested for K-3 corrosion and the results are presented in this report. Corrosion of Monofrax K-3 refractory materials in the HAL24M2 glass melts was measured using a crucible-scale method. Two test conditions, 1150 °C/7days and 1200 °C/7days were applied. The melt-line neck corrosion depth of the test coupons was measured by micro-computed tomography (micro-CT). The measured K-3 neck corrosion values were compared to predicted values using the model in Vienna et al. (2024). The model slightly over-predicted the neck corrosion depth of these glasses.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

LAW Glass Property-Composition Models for K-3 Refractory Corrosion and Sulfate Solubility

LAW glass development work for ORP has focused on increasing waste loading in the glasses, which requires higher sulfur and alkali concentrations in the glasses. Two of the properties of LAW glasses that constrain increases in sulfur and alkali concentrations are sulfate solubility and K-3 refractory corrosion. The present work was focused on compiling available property-composition data on sulfate solubility and K-3 refractory corrosion and developing models that correlate these properties to glass composition. This work is the first phase of a multi-year effort aimed at the development of LAW glass property-composition models for these two properties.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

High Entropy Rare-earth Oxide (HERO) Coatings for Refractory Alloys

The HERO coating was developed to protect refractory alloys for application in the harsh hot section of the turbine engine environment addressing ARPA-E ULTIMATE Project Topic 2: Coating Development. The effort was both innovative in its utilization of high entropy rare earth oxides as well as transformational in our approach: holistic design of a single layer thermal/environmental barrier coating (T/EBC) for refractory alloys, with an excellent coefficient of thermal expansion (CTE) match to the alloy substrate, chemical compatibility with the underlying alloy, low oxidant permeability, stability in combustion environments, low thermal conductivity, thermal shock resistance, and resistance to degradation by siliceous debris (calcium magnesium alumino-silicates-CMAS). The high entropy rare earth oxide approach enables two critical coating properties: tailoring CTE match to the substrate and, most significantly, substantially reduced thermal conductivity. The summation of these proposed coating capabilities goes well beyond the technical requirements specified in the ULTIMATE program objectives, and additionally is essential for a successful first stage turbine blade application.

36 MATERIALS SCIENCE↗

Refractory metal shielding /insulation/ increases operating range of induction furnace

Thermal radiation shield contains escaping heat from an induction furnace. The shield consists of a sheet of refractory metal foil and a loosely packed mat of refractory metal fibers in a concentric pattern. This shielding technique can be used for high temperature ovens, high temperature fluid lines, and chemical reaction vessels.

Ebihara, B. T.↗

Fibers of newly developed refractory ceramics produced by improved process

Rods of refractory ceramic material and glasses having relatively high fusion temperatures and tensile strengths are converted to fiber by subjecting these rods to alternate fusion and gas-jet bursts. The refractory, high tensile strength fibers produced are combined with suitable binder to produce heat-resistant fabrics and rigid structures.

Source record↗

Survey made of refractory metals

Survey reviews the structural applications of refractory metals and the special problems they present in manufacture, evaluation, and application. The unique facilities required for their processing and evaluation, a summary of accomplishments in achieving commercial products, and the present status of the most advanced refractory materials are presented.

Ault, G. M.↗

Some possible filler alloys with low vapor pressures for refractory-metal brazing

A compilation of eutectics and melting-point minima for binary combinations of metals having vapor pressures below 10 to the minus 10th power torr at 1500 degrees K and .00005 torr at 2000 degree K is presented. These compositions and others near them on their phase diagrams are potential special brazing fillers for refractory metals. Some possible problems and advantages for fusion bonds of such mixtures are indicated. Evaluations of brazing fillers containing refractory metals are reported.

Morris, J. F.↗

Recent materials compatibility studies in refractory metal-alkali metal systems for space power applications.

Advanced Rankine and other proposed space power systems utilize refractory metals in contact with both single-phase and two-phase alkali metals at elevated temperatures. A number of recent compatibility experiments are described which emphasize the excellent compatibility of refractory metals with the alkali metals, lithium, sodium, and potassium, under a variety of environmental conditions. The alkali metal compatibilities of tantalum-, columbium-, molybdenum-, and tungsten-base alloys are discussed.

Harrison, R. W.↗