Search NASA⌕ Search

SEARCH · Search NASA

Results for “REPLICAS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Carbon-related donor–acceptor pair transition in the infrared in h-BN

Experimental studies of intentionally doped impurities for the understanding of conductivity control in hexagonal boron nitride (h-BN) ultrawide bandgap (UWBG) semiconductor are limited but are highly desired for emerging applications of h-BN. We report synthesis by hydride vapor phase epitaxy and comparison photoluminescence (PL) emission spectroscopy studies of intentionally carbon (C)-doped and undoped h-BN semi-bulk crystals. In addition to the well-known C-related emission lines observed previously, a C-impurity-related transition near 1.31 eV consisting of multiple phonon replicas has been observed in C-doped h-BN at room temperature. Phonon replicas involved in the 1.31 eV emission have been identified using polarization resolve PL spectroscopy as the transverse acoustic (TA)/longitudinal acoustic (LA) and out-of-plane optical phonon (ZO) modes at the middle point, T, between the Γ- and K-points in the first Brillouin zone. Based on the agreement between the spectral peak position of the observed dominant emission line at 1.31 eV and the calculated energy-level separation between CB donor (carbon replacing boron) and Ci acceptor (carbon interstitial), the observed IR emission line can be decisively assigned to the donor–acceptor pair (DAP) transition involving the CB donor and Ci acceptor assisted by the intervalley (Κ → Μ) scattering processes. The results reinforce the perception that C impurities form deep-level centers and provided an improved understanding of C impurities in h-BN.

Physics↗

Fundamental optical transitions in hexagonal boron nitride epilayers

Fundamental optical transitions in hexagonal boron nitride (h-BN) epilayers grown on sapphire by metal–organic chemical vapor deposition (MOCVD) using triethylboron as the boron precursor have been probed by photoluminescence (PL) emission spectroscopy. The low temperature (10 K) PL spectrum exhibits two groups of emission lines. The first group includes the direct observation of the free exciton and impurity bound exciton (BX) transitions and phonon replicas of the BX transition, whereas the second group is attributed to the direct observation of the band-to-band transition and its associated phonon replicas. The observations of zero-phonon lines of the band-to-band and exciton transitions, which are supposedly forbidden or “dark” in perfect h-BN crystals, result from a relaxed requirement of momentum conservation due to symmetry-breaking in the presence of high concentrations of impurities/defects and strain, which in turn provided more deterministic values of the energy bandgap (E g ), exciton binding energy (E x ), and binding energy of impurity bound excitons (E BX ) in h-BN epilayers. Excitonic parameters of h-BN epilayers grown by MOCVD, carbon-free chemical vapor deposition, and high purity h-BN bulk materials are compared and discussed. The present results, together with available information in the literature, represent a significant improvement in the understanding of the fundamental optical properties and excitonic parameters of h-BN ultrawide bandgap semiconductors.

36 MATERIALS SCIENCE↗

The hunt for the third acceptor in CuInSe 2 and Cu(In,Ga)Se 2 absorber layers

We show the model for intrinsic defects in Cu(In,Ga)Se 2 semiconductor layers is still under debate for the full range between CuInSe 2 and CuGaSe 2 . It is commonly agreed by theory and experiment, that there are at least one shallow donor and two shallow acceptors. Spatially resolved photoluminescence on CuGaSe 2 previously revealed a third acceptor. In this study we show with the same method that the photoluminescence peak at 0.94 eV in CuInSe 2 , previously attributed to a third acceptor, is a phonon replica. However another pronounced peak at 0.9 eV is detected on polycrystalline CuInSe 2 samples grown with high copper and selenium excess. Intensity and temperature dependent photoluminescence measurements reveal that this peak originates from a DA-transition from a shallow donor (<8 meV) into a shallow acceptor A3 (135 [Formula: see text] 10) meV. The DA3 transition has three distinct phonon replicas with 28 meV spectral spacing and a Huang Rhys factor of 0.75. Complementary admittance measurements are dominated by one main step with an activation energy of 125 meV which corresponds well with the found A3 defect. The same defect is also observed in Cu(In,Ga)Se 2 samples with low gallium content. For [Ga]/([Ga] + [In])-ratios of up to 0.15 both methods show a concordant increase of the activation energy with increasing gallium content shifting the defect deeper into the bandgap. The indium vacancy ν In is discussed as a possible origin of the third acceptor level in CuInSe 2 and ν III in Cu(In,Ga)Se 2 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Replication of x-ray blazed gratings by nano-inscribing.

A nano-inscribing technique was tested as a method of cost-effective replication of blazed diffraction gratings for x-rays. A saw-tooth mold for the nano-inscribing was fabricated by a double-replication process from a master blazed grating. The nano-inscribing was performed using a UV-curable resist of low viscosity to provide a small thickness of the resist replicas, required for a following transfer process. The nano-inscribing process was optimized to minimize surface relaxation and preserve the saw-tooth shape of the grooves, required for high diffraction efficiency. The quality of the replica gratings was evaluated via diffraction efficiency simulations. The simulations demonstrated that near theoretical efficiency can be achieved for the x-ray gratings made by the nano-inscribing approach.

blazed grating↗

The quantum p -spin glass model: a user manual for holographers

We study a large-N bosonic quantum mechanical sigma-model with a spherical target space subject to disordered interactions, more colloquially known as the p-spin spherical model. Replica symmetry is broken at low temperatures and for sufficiently weak quantum fluctuations, which drives the system into a spin glass (SG) phase. The first half of this paper is dedicated to a discussion of this model's thermodynamics, with particular emphasis on the marginally stable SG. This phase exhibits an emergent conformal symmetry in the strong coupling regime, which dictates its thermodynamic properties. It is associated with an extensive number of nearby states in the free energy landscape. We discuss in detail an elegant approximate solution to the SG equations, which interpolates between the conformal regime and an ultraviolet-complete short distance solution. In the second half of this paper we explore the real-time dynamics of the model and uncover quantum chaos as measured by out-of-time-order four-point functions, both numerically and analytically. We find exponential Lyapunov growth, which intricately depends on the model's couplings and becomes strongest in the quantum critical regime. We emphasize that the SG phase also exhibits quantum chaos, albeit with parametrically smaller Lyapunov exponent than in the replica symmetric phase. An analytical calculation in the marginal SG phase suggests that this Lyapunov exponent vanishes in a particular infinite coupling limit. Finally, we comment on the potential meaning of these observations from the perspective of holography.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Generalized ensemble method applied to study systems with strong first order transitions

At strong first-order phase transitions, the entropy versus energy or, at constant pressure, enthalpy, exhibits convex behavior, and the statistical temperature curve correspondingly exhibits an S-loop or back-bending. In the canonical and isothermal-isobaric ensembles, with temperature as the control variable, the probability density functions become bimodal with peaks localized outside of the S-loop region. Inside, states are unstable, and as a result simulation of equilibrium phase coexistence becomes impossible. To overcome this problem, a method was proposed by Kim, Keyes and Straub, where optimally designed generalized ensemble sampling was combined with replica exchange, and denoted generalized replica exchange method (gREM). This new technique uses parametrized effective sampling weights that lead to a unimodal energy distribution, transforming unstable states into stable ones. In the present study, the gREM, originally developed as a Monte Carlo algorithm, was implemented to work with molecular dynamics in an isobaric ensemble and coded into LAMMPS, a highly optimized open source molecular simulation package. Lastly, the method is illustrated in a study of the very strong solid/liquid transition in water.

36 MATERIALS SCIENCE↗

Theory of the phase transition in random unitary circuits with measurements

Here, we present a theory of the entanglement transition tuned by measurement strength in qudit chains evolved by random unitary circuits and subject to either weak or random projective measurements. The transition can be understood as a nonanalytic change in the amount of information extracted by the measurements about the initial state of the system, quantified by the Fisher information. To compute the von Neumann entanglement entropy $\textit{S}$ and the Fisher information $\mathcal{F}$, we apply a replica method based on a sequence of quantities $\tilde{S}^{(n)}$ and $\mathcal{F}^{(n)}$ that depend on the $\textit{n}$th moments of density matrices and reduce to $\textit{S}$ and $\mathcal{F}$ in the limit $\textit{n}$ → 1. These quantities with $\textit{n}$ ≥ 2 are mapped to free energies of a classical spin model with $\textit{n}$! internal states in two dimensions with specific boundary conditions. In particular, $\tilde{S}^{(n)}$ is the excess free energy of a domain wall terminating on the top boundary, and $\mathcal{F}^{(n)}$ is related to the magnetization on the bottom boundary. Phase transitions occur as the spin models undergo ordering transitions in the bulk. Taking the limit of large local Hilbert space dimension $\textit{q}$ followed by the replica limit $\textit{n}$ → 1, we obtain the critical measurement probability $p_c$ = 1/2 and identify the transition as a bond percolation in the 2D square lattice in this limit. Finally, we show there is no phase transition if the measurements are allowed in an arbitrary nonlocal basis, thereby highlighting the relation between the phase transition and information scrambling. We establish an explicit connection between the entanglement phase transition and the purification dynamics of a mixed state evolution and discuss implications of our results to experimental observations of the transition and simulability of quantum dynamics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Anomalous suppression of the Bose glass at commensurate fillings in the disordered Bose-Hubbard model

We study the weakly disordered Bose-Hubbard model on a cubic lattice through a one-loop renormalization-group analysis of the corresponding effective-field theory which is explicitly derived by combining a strong-coupling expansion with a replica average over the disorder. The method is applied not only to generic uncorrelated on-site disorder but also to simultaneous hopping-disorder correlated with the differences of adjacent disorder potentials. Such correlations are inherent in fine-grained optical speckle potentials used as a source of disorder in optical lattice experiments. As a result of strong coupling, the strength of the replica-mixing disorder vertex, responsible for the emergence of a Bose glass, crucially depends on the chemical potential and the Hubbard repulsion and vanishes to leading order in the disorder at commensurate boson fillings. As a consequence, at such fillings a direct transition between the Mott insulator and the superfluid in the presence of disorder cannot be excluded on the basis of a one-loop calculation. At incommensurate fillings, at a certain length scale, the Mott insulator will eventually become unstable toward the formation of a Bose glass. Phase diagrams as a function of the microscopic parameters are presented and the finite-size crossover between the Mott-insulating state and the Bose glass is analyzed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ab initio study of cross-interface electron-phonon couplings in FeSe thin films on SrTiO 3 and BaTiO 3

We study the electron-phonon coupling strength near the interface of monolayer and bilayer FeSe thin films on SrTiO 3 , BaTiO 3 , and oxygen-vacant SrTiO 3 substrates, using ab initio methods. The calculated total electron-phonon coupling strength λ = 0.2 – 0.3 cannot account for the high T c ~ 70 K observed in these systems through the conventional phonon-mediated pairing mechanism. In all of these systems, however, we find that the coupling constant of a polar oxygen branch peaks at q = 0 with negligible coupling elsewhere, while the energy of this mode coincides with the offset energy of the replica bands measured recently by angle-resolved photoemission spectroscopy experiments. However, the integrated coupling strength for this mode from our current calculations is still too small to produce the observed high T c , even through the more efficient pairing mechanism provided by the forward scattering. Also, we arrive at the same qualitative conclusion when considering a checkerboard antiferromagnetic configuration in the Fe layer. In light of the experimental observations of the replica band feature and the relatively high T c of FeSe monolayers on polar substrates, our results point towards a cooperative role for the electron-phonon interaction, where the cross-interface interaction acts in conjunction with a purely electronic interaction. Finally, we discuss a few scenarios where the coupling strength obtained here may be enhanced.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of moiré lattice structure on electronic properties of graphene

Here, we study structural and electronic properties of graphene grown on silicone carbide (SiC) substrate using a scanning tunneling microscope, spot-profile-analysis low-energy electron diffraction, and angle-resolved photoemission spectroscopy. We find several new replicas of Dirac cones in the Brillouin zone. Their locations can be understood in terms of a combination of basis vectors linked to SiC 6 × 6 and graphene 6√3×6√3 reconstruction. Therefore, these new features originate from the moiré caused by the lattice mismatch between SiC and graphene. More specifically, Dirac cone replicas are caused by underlying weak modulation of the ionic potential by the substrate that is then experienced by the electrons in the graphene. We also demonstrate that this effect is equally strong in single- and trilayer graphene; therefore, the additional Dirac cones are intrinsic features rather than the result of photoelectron diffraction. These new features in the electronic structure are very important for the interpretation of recent transport measurements and can assist in tuning the properties of graphene for practical applications.

36 MATERIALS SCIENCE↗

In vivo real-time dosimetric verification in high dose rate prostate brachytherapy

Purpose: To evaluate the performance of a diode array in the routine verification of planned dose to points inside the rectum from prostate high dose rate (HDR) brachytherapy using a real-time planning system. Methods: A dosimetric study involving 28 patients was undertaken where measured doses received during treatment were compared to those calculated by the treatment planning system (TPS). After the ultrasound imaging required for treatment planning had been recorded, the ultrasound probe was replaced with a geometric replica that contained an 8 mm diameter cylindrical cavity in which a PTW diode array type 9112 was placed. The replica probe was then positioned inside the rectum with the individual diode positions determined using fluoroscopy. Dose was then recorded during the patients' treatment and compared to associated coordinates in the planning system. Results: Factors influencing diode response and experimental uncertainty were initially investigated to estimate the overall uncertainty involved in dose measurements, which was determined to be {+-}10%. Data was acquired for 28 patients' first fractions, 11 patients' second fractions, and 13 patients' third fractions with collection dependent upon circumstances. Deviations between the diode measurements and predicted values ranged from -42% to +35% with 71% of measurements experiencing less than a 10% deviation from the predicted values. If the {+-}10% measurement uncertainty was combined with a tolerated dose discrepancy of {+-}10% then over 95% of the diode results exhibited agreement with the calculated data to within {+-}20%. It must also be noted that when large dose discrepancies were apparent they did not necessarily occur for all five diodes in the one measurement. Conclusions: This technique provided a method that could be utilized to detect gross errors in dose delivery of a real-time prostate HDR plan. Limitations in the detection system used must be well understood if meaningful results are to be achieved.

61 RADIATION PROTECTION AND DOSIMETRY↗

Monte Carlo simulations of adult and pediatric computed tomography exams: Validation studies of organ doses with physical phantoms

Purpose: To validate the accuracy of a Monte Carlo source model of the Siemens SOMATOM Sensation 16 CT scanner using organ doses measured in physical anthropomorphic phantoms. Methods: The x-ray output of the Siemens SOMATOM Sensation 16 multidetector CT scanner was simulated within the Monte Carlo radiation transport code, MCNPX version 2.6. The resulting source model was able to perform various simulated axial and helical computed tomographic (CT) scans of varying scan parameters, including beam energy, filtration, pitch, and beam collimation. Two custom-built anthropomorphic phantoms were used to take dose measurements on the CT scanner: an adult male and a 9-month-old. The adult male is a physical replica of University of Florida reference adult male hybrid computational phantom, while the 9-month-old is a replica of University of Florida Series B 9-month-old voxel computational phantom. Each phantom underwent a series of axial and helical CT scans, during which organ doses were measured using fiber-optic coupled plastic scintillator dosimeters developed at University of Florida. The physical setup was reproduced and simulated in MCNPX using the CT source model and the computational phantoms upon which the anthropomorphic phantoms were constructed. Average organ doses were then calculated based upon these MCNPX results. Results: For all CT scans, good agreement was seen between measured and simulated organ doses. For the adult male, the percent differences were within 16% for axial scans, and within 18% for helical scans. For the 9-month-old, the percent differences were all within 15% for both the axial and helical scans. These results are comparable to previously published validation studies using GE scanners and commercially available anthropomorphic phantoms. Conclusions: Overall results of this study show that the Monte Carlo source model can be used to accurately and reliably calculate organ doses for patients undergoing a variety of axial or helical CT examinations on the Siemens SOMATOM Sensation 16 scanner.

60 APPLIED LIFE SCIENCES↗

A multimodality vascular imaging phantom of an abdominal aortic aneurysm with a visible thrombus

Purpose: With the continuous development of new stent grafts and implantation techniques, it has now become technically feasible to treat abdominal aortic aneurysms (AAA) with challenging anatomy using endovascular repair with standard, fenestrated, or branched stent-grafts. In vitro experimentations are very useful to improve stent-graft design and conformability or imaging guidance for stent-graft delivery or follow-up. Vascular replicas also help to better understand the limitation of endovascular approaches in challenging anatomy and possibly improve surgical planning or training by practicing high risk clinical procedures in the laboratory to improve outcomes in the operating room. Most AAA phantoms available have a very basic anatomy, which is not representative of the clinical reality. This paper presents a method of fabrication of a realistic AAA phantom with a visible thrombus, as well as some mechanical properties characterizing such phantom. Methods: A realistic AAA geometry replica of a real patient anatomy taken from a multidetector computed tomography (CT) scan was manufactured. To demonstrate the multimodality imaging capability of this new phantom with a thrombus visible in magnetic resonance (MR) angiography, CT angiography (CTA), digital subtraction angiography (DSA), and ultrasound, image acquisitions with all these modalities were performed by using standard clinical protocols. Potential use of this phantom for stent deployment was also tested. A rheometer allowed defining hyperelastic and viscoelastic properties of phantom materials. Results: MR imaging measurements of SNR and CNR values on T1 and T2-weighted sequences and MR angiography indicated reasonable agreement with published values of AAA thrombus and abdominal components in vivo. X-ray absorption also lay within normal ranges of AAA patients and was representative of findings observed on CTA, fluoroscopy, and DSA. Ultrasound propagation speeds for developed materials were also in concordance with the literature for vascular and abdominal tissues. Conclusions: The mimicked abdominal tissues, AAA wall, and surrounding thrombus were developed to match imaging features of in vivo MR, CT, and ultrasound examinations. This phantom should be of value for image calibration, segmentation, and testing of endovascular devices for AAA endovascular repair.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

SARS-CoV2 Protein-Ligand Simulation Dataset: Layer 1 (Simulation Initial Conditions and Parameters)

A set of 24 protein structures/complexes from the SARS CoV-2 proteome and inputs prepared for simulation using the CHARMM36m forcefield in PDB and gromacs formats. Each system contains a pdb and gromacs top and related input files necessary for running a temperature replica-exchange simulation. In addition, we also include: charmm PSF files (generated from the gromacs topology), a list of temperatures at which replica-exchange simulations were done (tempRamp), example gromacs run input mdp files, and initial minimized structures where available (minimized.pdb).

60 APPLIED LIFE SCIENCES↗

X-ray verification of sol-gel resist shrinkage in substrate-conformal imprint lithography for a replicated blazed reflection grating

Surface-relief gratings fabricated through nanoimprint lithography (NIL) are prone to topographic distortion induced by resist shrinkage. Characterizing the impact of this effect on blazed diffraction efficiency is particularly important for applications in astrophysical spectroscopy at soft x-ray wavelengths ( λ ≈ 0.5 − 5 nm) that call for the mass-production of large-area grating replicas with sub-micron, sawtooth surface-relief profiles. A variant of NIL that lends itself well for this task is substrate-conformal imprint lithography (SCIL), which uses a flexible, composite stamp formed from a rigid master template to imprint nanoscale features in an inorganic resist that cures thermodynamically through a silica sol-gel process. While SCIL enables the production of several hundred imprints before stamp degradation and avoids many of the detriments associated with large-area imprinting in NIL, the sol-gel resist suffers shrinkage dependent on the post-imprint cure temperature. Through atomic force microscopy and diffraction-efficiency testing at beamline 6.3.2 of the Advanced Light Source, the impact of this effect on blaze response is constrained for a ∼160-nm-period grating replica cured at 90 ° C. Results demonstrate a ∼2 ° reduction in blaze angle relative to the master grating, which was fabricated by anisotropic wet etching in 〈311〉-oriented silicon to yield a facet angle close to 30 ° .

McCoy, Jake A. (ORCID:0000000216057517)↗

Building high throughput permissioned blockchain fabrics: challenges and opportunities

Since the introduction of Bitcoin---the first widespread application driven by blockchains---the interest in the design of blockchain-based applications has increased tremendously. At the core of these applications are consensus protocols that securely replicate client requests among all replicas, even if some replicas are Byzantine faulty. Unfortunately, these consensus protocols typically have low throughput, and this lack of performance is often cited as the reason for the slow wider adoption of blockchain technology. Consequently, many works focus on designing more efficient consensus protocols to increase throughput of consensus. We believe that this focus on consensus protocols only explains part of the story. To investigate this belief, we raise a simple question: Can a well-crafted system using a classical consensus protocol outperform systems using modern protocols? In this tutorial, we answer this question by diving deep into the design of blockchain systems. Further, we take an in-depth look at the theory behind consensus, which can help users select the protocol that best-fits their requirements. Finally, we share our vision of high-throughput blockchain systems that operate at large scales.

97 MATHEMATICS AND COMPUTING↗

Data, Photographs, Videos, and Information for the Niwot Ridge Subalpine Forest (US-NR1) AmeriFlux site

This data package contains data and information about the operation of the Niwot Ridge Subalpine Forest AmeriFlux site (US-NR1) between Nov 1998 to the present (2020). This data archive supplements the primary 30-min data storage for the US-NR1 data (i.e., https://doi.org/10.17190/AMF/1246088) by providing the following: (i) five-minute statistics (means, variances, covariances) of all data measured by the data system between Nov 1998 and September 2020 in netCDF format, (ii) CSV data files saved within the memory of the CR23X data loggers (as well as an archive of the data logger programs), (iii) an archive of previous 30-min ASCII data versions of the US-NR1 AmeriFlux data and information related to each data release (a replica of what can be found at http://urquell.colorado.edu/data_ameriflux/), (iv) a web calendar (in HTML format) documenting activity at the site (a replica of http://urquell.colorado.edu/calendar/), (v) photos (over 15,000) and video taken at the site between years 2001 and present day (2020), and (vi) several auxiliary datasets, primary related to trees near the site, soil moisture and soil temperature, and subcanopy radiation data. The data package is setup so that the web calendar, photos, and electronic logbook can be easily accessed on a local computer using a web browser. The provided data files are in either netCDF, CSV, ASCII, or MATLAB format. To obtain a better understanding about the archive, please start by reading the PDF: README_ESS_DIVE_USNR1_readme_first.pdf.

54 ENVIRONMENTAL SCIENCES↗

Advanced Topographic Characterization of Variously Prepared Niobium Surfaces and Linkage to RF Losses

Superconducting radio frequency (SRF) technology is widely adopted in particle accelerators. The shallow penetration (~ 40 nm) of the RF into superconducting niobium lends great importance to SRF cavity interior surface chemistry and topography. These in turn are strongly influenced by the chemical etching "surface clean-up" that follows fabrication. The principal surface smoothing methods are buffered chemical polish (BCP) and electropolish (EP). The resulting topography is characterized by atomic force microscopy (AFM). The power spectral density (PSD) of AFM data provides a more thorough description of the topography than a single-value roughness measurement. In this work, one dimensional average PSD functions derived from topography of BCP and EP with different controlled starting conditions and durations have been fitted with a combination of power law, K-correlation, and shifted Gaussian models to extract characteristic parameters at different spatial harmonic scales. While the simplest characterizations of these data are not new, the systematic tracking of scale-specific roughness as a function of processing is new and offers feedback for tighter process prescriptions more knowledgably targeted at beneficial niobium topography for SRF applications. Process development suffers because the cavity interior surface cannot be viewed directly without cutting out pieces, rendering the cavities unavailable for further study. Here we explore replica techniques as an alternative, providing imprints of cavity internal surface that can be readily examined. A second matter is the topography measurement technique used. Atomic force microscopy (AFM) has proven successful, but too time intensive for routine use. We therefore introduce white light interferometry (WLI) approach as an alternative. We examined real surfaces and their replicas, using AFM and WLI. We find that the replica/WLI is promising to provide the large majority of desired information, so that use of the time-intensive AFM approach can be limited to where it is genuinely necessary. The prevalent idea is that sharp features could lead to magnetic quench or enhance the thermal quench. In this report, a calculation on magnetic field is numerically given on fine structure by finite element and conformal mapping methods. Corresponding RF Ohmic loss will be simulated. A certain thermal tolerant will be calculated. A Q~E curve will be predicted from this model. A perturbation model is utilized to calculate rough surface additional RF loss based on PSD statistical analysis. This model will not consider that superconductor will become normal at field higher than transition field. Therefore, it is only expected to explain mid-field Q performance. One can calculate the RF power dissipation ratio between rough surface and ideal smooth surface within this field range. Additionally, the resistivity of Nb is temperature and magnetic field dependent from classic thermal feedback model theory. Combining with topographic PSD analysis and Rs temperature and field dependency, a middle field Q slope model could be modeled and the contribution from topography can be simulated.

Xu, Chen↗