Search NASA⌕ Search

SEARCH · Search NASA

Results for “RIMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Conical ion distributions at one earth radius - Observations from the acceleration region?

Thermal ion measurements from the retarding ion mass spectrometer (RIMS) on Dynamics Explorer 1 (DE 1) in the night side auroral region were surveyed for evidence of ion acceleration. The RIMS measurements showed evidence for ion acceleration in the 2-10,000 km altitude range, with ion distributions peaked near 90 deg, and with temperatures of 1 to 10 eV. Two illustrations of the RIMS data for such observations are given. The conical distributions are found at the low latitude edge of the auroral region, just outside the plasmapause. In the first example, the three major ion species (H+, He+, and O+) show evidence of acceleration. The angular distributions are peaked at different pitch angles, indicating that the different species have been accelerated at different altitudes. The H+ flux is higher than the O+ flux in this first example, in the RIMS energy range (0-50 eV). This is apparently typical of the RIMS observations on the night side. In the second example, only O+ is transversely accelerated.

Olsen, R. C.↗
NASA NTRS1994

Orthopyroxene as a recorder of primitive achondrite petrogenesis: Major-, minor-, and trace-element systematics of orthopyroxene in Lodran

Considerable attention has been paid recently to the primitive achondrites because they may form a link between chondrites and more differentiated achondrite meteorites. A recent paper by Miyamoto and Takeda addresses the thermal history of lodranites Yamato 74357 and MAC 88177 as inferred from chemical zoning of pyroxene and olivine determined by electron microprobe analyses. Their results suggested that interstitial melt was present and then extracted. We have taken the analysis of Lodran-type meteorites one step further by incorporating the techniques of Electromagnetic Pulse/Wavelength Dispersive Spectroscopy (EMP/WDS) compositional imaging and scanning ion mass spectroscopy (SIMS) analysis. Orthopyroxene in Lodran is strongly zoned in CaO, Al2O3, TiO2, and Cr2O3 within the last 10-30 microns from the grain boundaries. The rims are reversely zoned in Mg-Fe, exhibiting Mg enrichment, and compositions change from a fairly uniform Wo3En94 within the grains to Wo1En96 at the rims. CaO drops from 1.6 to 0.6 wt% and Al2O3, TiO2, and Cr2O3 exhibit similar depletions. MnO is fairly uniform throughout the grains at around 0.5 wt%. Olivine is also reversely zoned with respect to not only grain boundaries but also to fractures within the grains, giving many olivine grains a complex, patchy zoning pattern. Some of the core-rim trace-element systematics for orthopyroxene are illustrated. Because of the rather narrow zoned rims in Lodran orthopyroxene and the low trace-element abundances, it is difficult to clearly resolve the trace-element systematics. Nevertheless it is evident that the cores are enriched in the incompatible trace elements Ce, Nd, Dy, Er, Yb, Y, and Zr relative to the rims.

Papike, J. J.↗
NASA NTRS1995

Geology and landscape evolution of the Hellas region of Mars

Hellas basin on Mars has been the site of volcanism, tectonism, and modification by fluvial, mass-wasting, and eolian processes over its more than 4-b.y. existence. Our detailed geologic mapping and related studies have resulted in the following new interpretations. The asymmetric distribution of highland massifs and other structures that define the uplifted basin rim suggest a formation of the basin by the impact of a low-angle bolide having a trajectory heading S60E. During the Late Noachian, the basin was infilled, perhaps by lava flows, that were sufficiently thick (greater than 1 km) to produce wrinkle ridges on the fill material and extensional faulting along the west rim of the basin. At about the same time, deposits buried northern Malea Planum, which are interpreted to be pyroclastic flows from Amphitrites and Peneus Paterae on the basis of their degraded morphology, topology, and the application of a previous model for pyroclastic volcanism on Mars. Peneus forms a distinctive caldera structure that indicates eruption of massive volumes of magma, whereas Amphitrites is a less distinct circular feature surrounded by a broad, low, dissected shield that suggests generally smaller volume eruptions. During the Early Hesperian, an approximately 1-to 2km-thick sequence of primarily fined-grained, eolian material was deposited on the floor of Hellas basin. Subsequently, the deposit was deeply eroded, except where armored by crater ejecta, and it retreated as much as 200-300 km along its western margin, leaving behind pedestal craters and knobby outliers of the deposit. Local debris flows within the deposit attest to concentrations of groundwater, perhaps in part brought in by outflow floods along the east rim of the basin. These floods may have deposited approximately 100-200m of sediment, subduing wrinkle ridges in the eastern part of the basin floor. During the Late Hesperian and Amazonian, eolian mantles were emplaced on the basin rim and floor and surrounding highlands. Their subsequent erosion resulted in pitted and etched plains and crater fill, irregular mesas, and pedestal craters. Local evidence occurs for the possible former presence of ground ice or ice sheets approximately 100 km across; however, we disagree with a hypothesis that suggest that the entire south rim and much of the floor of Hellas have been glaciated. Orientations of dune fields and yardangs in lower parts of Hellas basin follow directions of the strongest winds predicted by a recently published general circulation model (GCM). Transient frost and dust splotches in the region are, by contrast, related to the GCM prediction for the season in which the images they appear in were taken.

Tanaka, Kenneth L.↗
NASA NTRS1995

Geology and landscape evolution of the Hellas region of Mars

Hellas basin on Mars has been the site of volcanism, tectonism, and modification by fluvial, mass-wasting, and eolian processes over its more than 4-b.y. existence. Our detailed geologic mapping and related studies have resulted in the following new interpretations. The asymmetric distribution of highland massifs and other structures that define the uplifted basin rim suggest a formation of the basin by the impact of a low-angle bolide having a trajectory heading S 60 deg E. During the Late Noachian, the basin was infilled, perhaps by lava flows, that were sufficiently thick (>1 km) to produce wrinkle ridges on the fill material and extensional faulting along the west rim of the basin. At about the same time, deposits buried northern Malea Planum, which are interpreted to be pyroclastic flows from Amphitrites and Peneus Paterae on the basis of their degraded morphology, topography, and the application of a previous model for pyroclastic volcanism on Mars. Peneus forms a distinctive caldera structure that indicates eruption of massive volumes of magma, whereas Amphitrites is a less distinct circular feature surrounded by a broad, low, dissected shield that suggests generally smaller volume eruptions. During the Early Hesperian, an approx. 1- to 2-km-thick sequence of primarily fined-grained, eolian material was deposited on the floor of Hellas basin. Subsequently, the deposit was deeply eroded, except where armored by crater ejecta, and it retreated as much as 200-300 km along its western margin, leaving behind pedestal craters and knobby outliers of the deposit. Local debris flows within the deposit attest to concentrations of groundwater, perhaps in part brought in by outflow floods along the east rim of the basin. These floods may have deposited approx. 100-200 m of sediment, subduing wrinkle ridges in the eastern part of the basin floor. During the Late Hesperian and Amazonian, eolian mantles were emplaced on the basin rim and floor and surrounding highlands. Their subsequent erosion resulted in pitted and etched plains and crater fill, irregular mesas, and pedestal craters. Local evidence occurs for the possible former presence of ground ice or ice sheets approx. 100 km across; however, we disagree with a hypothesis that suggests that the entire south rim and much of the floor of Hellas have been glaciated. Orientations of dune fields and yardangs in lower parts of Hellas basin follow directions of the strongest winds predicted by a recently published general circulation model (GCM). Transient frost and dust splotches in the region are, by contrast, related to the GCM prediction for the season in which the images they appear in were taken.

Tanaka, Kenneth L.↗
NASA NTRS1998

MOLA Topography of Impact Basins in the Northern Hemisphere of Mars

Coverage of the northern hemisphere of Mars by the Mars Orbiter Laser Altimeter (MOLA) during the aerobraking hiatus and the two Science Phasing Operation periods provides improved definition and characterization of large impact basins. Gridded MOLA data show the Utopia Basin has a pronounced bowl-like structure, as opposed to the interior rises suggested by the earlier USGS DEM. The elevation structure is concentric about the basin center as mapped by McGill. In particular, the proposed inner ring closely follows the -4 km contour over much of the southern, western and northwestern sides. Higher topography along portions of the dichotomy boundary aligns with the basin's outer ring. High topography in the polar region also occurs where the outer ring should lie, raising the possibility that perhaps some of the polar topography is due to basin structure as well as ice. Two MOLA passes near Phison Rupes provide evidence for a large "stealth" hole where Viking imagery show little evidence of any major structure. The 2 km deep, 600 km wide depression at 31OW, 3ON is as large as the Cassini impact basin 1000 km to the SW. While Cassini is easily recognized in image data, the "MOLA Hole" is not. If this depression is a deeply eroded and buried impact basin (as perhaps suggested by a decrease in the crater density and somewhat smoother terrain than in adjacent areas), it is not clear why it has managed to maintain its great depth. In Tempe at the dichotomy boundary a 300 km wide impact basin is revealed by pronounced bowl-like topography centered at 87W, 47N, even though only about 1/3 of the basin rim structure is obvious. The basin lies on a sloping boundary zone, with the more buried N rim up to 2 km below the rugged S rim. A similar N-S asymmetry in basin ring structure occurs for the much larger Isidis Basin, where the S rim rises 6 km but the subdued N rim rises barely 2 km above the floor. There is essentially no topographic expression of the main ring in the NE quadrant of Isidis where, if it exists, it lies below Hesperian-age plains.

Frey, Herbert↗
NASA NTRS1999

Lateral and Vertical Heterogeneity of Thorium in the Procellarum KREEP Terrane: As Reflected in the Ejecta Deposits of Post-Imbrium Craters

The Procellarum KREEP Terrane displays the highest concentrations of Th on the Moon. However, locations of elevated Th in this region appear to be random. As observed in the 5 deg per pixel equal-area Th data, and made more evident in the preliminary 2 deg data, Th is enhanced around the craters Aristillus, Aristarchus, Kepler, Mairan, the Apennine Bench formation, and the Fra Mauro region, while noticeably and unexpectedly lower in other locations (e.g., Archimedes, Copernicus, Eratosthenes, and Plato). We have examined the composition of the materials present in these regions with the goal of understanding the patchy nature to the distribution of Th and ultimately to decipher the geologic processes that have concentrated the Th. At present time, the published resolution of the Lunar Prospector Th gamma-ray data is low (5 deg per pixel), but this will soon be superceded by significantly higher-resolution data (2 deg per pixel). Even at this improved resolution, however, it is difficult to resolve the units that are the major source of Th. In an attempt to circumvent this problem, we employ the higher-resolution Clementine multispectral data for those regions mentioned above. We use the UV-VIS-derived compositional information and the spectral properties of craters, and their ejecta as drill holes through the mare-basalt surface to investigate the thickness and composition of underlying material. With this information we attempt to piece together the stratigraphy and geologic history of the Imbrium-Procellanim region. We processed the five-band multispectral data from the Clementine Mission (415, 750,900,950, and 1000nm) using ISIS software and calibration parameters developed by the USGS, Flagstaff, Arizona. Final image mosaics are in equal-area sinusoidal projection, and have a resolution of 250 m/pixel. Using the method of we produced maps of FeO and Ti02 composition. Here we examine the Th, FeO, and Ti02 composition and spectral properties of the craters discussed above and their ejecta, with the goal of describing the materials they excavate. One interpretation for the origin of the high-Th material is that subsurface KREEPy materials have been excavated by impact craters. The material excavated may be either volcanic KREEP (e,g., Apennine Bench Formation), KREEPy impact-melt breccia formed by the Imbrium impact (e.g., Fra Mauro Formation), or other KREEP-rich crustal material. Determining which type of material is responsible for the elevated Th and its extent is important to understanding the premare and possibly the prebasin stratigraphy of the Imbrium-Procellarum Region. Merging the 5 deg. Th data with the shaded relief map, we observe that the highest Th concentrations are not related to pre-Imbrium upper crustal materials. The Apennines, Alpes, and Caucasus Mountains represent the pre-Imbrian highlands material and do not express concentrations of Th, FeO, and TiO2 as high as the most Th-fich materials exposed within the Procellarum KREEP Terrane. We observe that, in general, these massifs contain 10-14 wt% FeO and 4-7 ppm Th. Determining whether the Th signal is from KREEP basalts or KREEPy impact-melt breccias cannot be done with the Clementine data because the two rock types are compositionally and mineralogically too similar (e.g., the Th-rich, mafic impact-melt breccias in the Apollo sample collection are dominated by a KREEP-basalt like component. Mapping-the distribution and sizes of craters and whether they display elevated Th concentrations or not, should reveal the depth and thickness of the KREEP-rich materials, and whether they are ubiquitous (i.e., impact-melt breccia) or more randomly distributed; this might be taken as an indicator of localized KREEP-basalt flows. Within the southeastern region of the Imbrium basin, there are two Th hot spots. The first is associated with the crater Aristillus, and the latter with the Apennine Bench Formation. Adjacent to these two hot spots are craters with a lower Th signature: Archimedes and Autolycus. We observe in the ejecta of Aristillus, a region of significantly lower FeO (10-14 wt%) relative to the surrounding mare basalt. The crater Autolycus, 50 km to the south, did not excavate similar low-FeO material. We suggest that the lower-FeO material in the ejecta of Aristillus corresponds to Th-rich material; the FeO content observed in Aristillus ejecta is comparable to that of KREEP basalt or mafic impact melt breccia (10-12 wt% FeO). We determine that this low FeO, Th-rich material is volcanic KREEP, as opposed to Imbrium impact melt, on the basis that the low-Fe material is exposed more prominently in ejecta in the northern portion of Aristillus. Our assumption is that if the layer underlying Aristillus was continuous, a more widespread and uniform low-Fe signature wouldbe observed in the ejecta deposit. Archimedes, 110 km southwest of Aristillus, impacted the northern portion of the Apennine Bench prior to the eruption of KREEP basalt. Archimedes rim material is not as enriched in Th as the Apennine Bench, and there are differences between the two in FeO concentration and in their continuum slope. Archimedes exhibits a much steeperor "redder" continuum slope than the Apennine Bench. This steepslope suggests the presence of glassy material. The glassy material is concentrated around an unnamed crater on the southern rim of Archimedes (4.5W, 28.2N) and along the northern rim of Archimedes. We suggest two possibilities, or a combination of the two, to explain the low-Th signal from Archimedes: (1) The Apennine Bench prior to KREEP basalt eruption was lower in Th (4-7 ppm, e.g., similar to the Apennine massifs) and KREEP basalts are absent in the rim of Archimedes; or (2) the glassy (possibly pyroclastic) material layering the rim of the Archimedes, dilutes any high-Th material present with low-Th material. (Additional information is contained in the original)

Gillis, J. J.↗
NASA NTRS2002

Insights into Corona Formation through Statistical Analyses

Statistical analysis of an expanded database of coronae on Venus indicates that the populations of Type 1 (with fracture annuli) and 2 (without fracture annuli) corona diameters are statistically indistinguishable, and therefore we have no basis for assuming different formation mechanisms. Analysis of the topography and diameters of coronae shows that coronae that are depressions, rimmed depressions, and domes tend to be significantly smaller than those that are plateaus, rimmed plateaus, or domes with surrounding rims. This is consistent with the model of Smrekar and Stofan and inconsistent with predictions of the spreading drop model of Koch and Manga. The diameter range for domes, the initial stage of corona formation, provides a broad constraint on the buoyancy of corona-forming plumes. Coronae are only slightly more likely to be topographically raised than depressions, with Type 1 coronae most frequently occurring as rimmed depressions and Type 2 coronae most frequently occuring with flat interiors and raised rims. Most Type 1 coronae are located along chasmata systems or fracture belts, while Type 2 coronas are found predominantly as isolated features in the plains. Coronae at hotspot rises tend to be significantly larger than coronae in other settings, consistent with a hotter upper mantle at hotspot rises and their active state.

Glaze, L. S.↗
NASA NTRS2002

Insights into Corona Formation Through Statistical Analyses

Statistical analysis of an expanded database of coronae on Venus indicates that the populations of Type 1 (with fracture annuli) and 2 (without fracture annuli) corona diameters are statistically indistinguishable, and therefore we have no basis for assuming different formation mechanisms. Analysis of the topography and diameters of coronae shows that coronae that are depressions, rimmed depressions, and domes tend to be significantly smaller than those that are plateaus, rimmed plateaus, or domes with surrounding rims. This is consistent with the model of Smrekar and Stofan and inconsistent with predictions of the spreading drop model of Koch and Munga. The diameter range for domes, the initial stage of corona formation, provides a broad constraint on the buoyancy of corona-forming plumes. Coronae are only slightly more likely to be topographically raised than depressions, with Type 1 coronae most frequently occurring as rimmed depressions and Type 2 coronae most frequently occurring with flat interiors and raised rims. Most Type 1 coronae are located along chasmata systems or fracture belts, while Type 2 coronae are found predominantly as isolated features in the plains. Coronae at hot spot rises tend to be significantly lager than coronae in other settings, consistent with a hotter upper mantle at hot spot rises and their active state.

Glaze, L. S.↗
NASA NTRS2003

A Study of the Non-Thermal X-Ray Emission of Shell-Type Supernova Remnants

We present an analysis of the X-ray spectrum of the Galactic shell-type SNR G347.3-0.5 (RX 51713.7-3946). This SNR is a member of a growing class of SNRs which are dynamically young, shell-type sources that emit non-thermal X-rays from specific regions on their outer shells. By performing a joint spectral analysis of data from observations made of G347.3-0.5 using the ROSAT PSPC, the ASCA GIS and the RXTE PCA, we have fit the spectra of particular regions of this SNR (including the bright northwestern and southwestern rims, the northeast rim and the interior diffuse emission) over the approximate energy range of 0.5 through 30 keV. We find that fits to the spectra of this SNR over this energy range using the SRCUT model were superior to a simple power law model or the SRESC model. We find that the inclusion of a thermal model with the SRCUT model helps to improve the fit to the observed X-ray spectrum: this represents the first detection of thermal X-ray emission from G347.3-0.5. Thermal emission appears to be more clearly associated with the diffuse emission in the interior of the SNR than with the bright X-ray emitting rims. A weak emission feature seen near 6.4 keV in the RXTE PCA spectrum most likely originates from diffuse X-ray emission from the surrounding Galactic Ridge rather than from G347.3-0.5 itself. We have analyzed our RXTE PCA data to search for pulsations from a recently discovered radio pulsar (PSR 51713-3949) which may be associated with G347.3-0.5, and we do not detect any X-ray pulsations at the measured radio period of 392 ms. Using the best-fit parameters obtained from the SRCUT model, we estimate the maximum energy of cosmic-ray electrons accelerated by the rims of G347.3-0.5 to be 19-25 TeV (assuming a magnetic field strength of B = 10muG), consistent with the results of Ellison et al. We present a broadband (radio to gamma ray) photon energy-flux spectrum for the northwestern rim of G347.3-0.5, where we have fit the spectrum using a more sophisticated synchrotron-inverse Compton model with a variable magnetic field strength. Our fit derived from this model yields a maximum energy of only 8.8 (+4.1) (-3.4) TeV for the accelerated cosmic-ray electrons and a much greater magnetic field strength of 150 (+250) (-80). Finally, we compare the gross properties of G347.3-0.5 with other SNRs known to possess X-ray spectra dominated by non-thermal emission.

Allen, Glenn E.↗
NASA NTRS2003

Versatile Turbine Disk Alloy Designed and Processed for Higher Temperature Applications

Advanced turbine engine configurations using higher temperature combustor and airfoil concepts require compressor and turbine disks that can withstand temperatures higher than the 650 C typical of current engines. This requires disk alloy and processing improvements. A versatile disk alloy was needed that could be given either fine grain heat treatments for high strength and fatigue and creep resistance up to 704 C or given coarse grain heat treatments for high strength and creep and dwell crack-growth resistance at higher temperatures. This alloy could produce disks with uniform microstructures and properties, as well as with varied, optimized microstructures at disk bore and rim sections. A series of experimental disk alloys were designed and processed to give subscale disks about 13 cm in diameter and 4 cm thick. These alloys had varying levels of key elements to affect mechanical properties and change the "solvus" solution heat-treatment temperature necessary to produce coarse grain microstructures. Disks were given coarse grain heat treatments followed by rapid oil quenching and slower fan air quenching. These heat treatments were intended to simulate the cooling paths of rapidly cooled full-scale disks at the outermost rim and interior bore locations, respectively. Preliminary quench tests of tensile specimens and coin-size minidisks had indicated that alloys having high solvus temperatures were more prone to cracking during rapid quenching from coarse grain heat treatments. These findings were confirmed in the subscale disks, where such alloys did form undesirable quench cracks. Mechanical tests were performed on specimens from subscale disks given these coarse grain heat treatments, as well as on specimens given a fine grain heat treatment. Tensile, creep, and crack growth tests were performed at 704 C and higher temperatures. A versatile alloy was identified that had a low solvus temperature for resistance to quench cracking as well as an optimal combination of high levels of strengthening refractory elements that produced balanced high mechanical properties for both fine grain and coarse grain microstructures. This low-solvus, high-refractory (LSHR) alloy has been scaled-up to produce prototype full-scale turbine disks typical of regional jet turbofan engines. Disks were successfully heat treated to give uniform coarse grain and uniform fine grain microstructures. Additional disks were given a NASA dual microstructure heat treatment (DMHT) that intentionally varied the solution heat-treatment temperatures between the disk rim and bore (re f. 1). The disk rim was heated to a high enough temperature to produce a coarse grain microstructure, while the bore was maintained at a lower temperature to produce a fine grain microstructure (see the figure). This DMHT can produce optimal high strength, fatigue, and creep resistance up to 704 C in the cooler running disk bore, and high strength, creep resistance, and dwell crack growth resistance at higher temperatures for the hotter disk rim. Extensive mechanical testing is being initiated to compare the mechanical properties of the uniform and DMHT disks.

Gabb, TImothy P.↗
NASA NTRS2003

Magmatic Processes That Produced Lunar Fire Fountains

Reanalysis of the Apollo 15 A, B, and C green glass beads from slide 15426,72, led to the discovery of patchy, highly vesicular glass rims adhering to beads. These rims are high in S and Ni and low in MgO, but otherwise compositionally similar to the green glasses. We find that these rims represent a unique melt composition that places constraints on lunar magmatic processes. Combining the compositional data for the vesicular glass rims with new minor element data for the green glass beads leads us to hypothesize that the vesicular rim fluid originated near the green glass source, at about 2.2 GPa. These findings support the theory of a heterogeneous lunar mantle, and suggest that sulfur did not drive the eruption from depth, but that degassing volatiles into the vacuum did drive the final fire fountain eruption.

Elkins-Tanton, Linda T.↗
NASA NTRS2007

Rarefying Spectra of Whispering-Gallery-Mode Resonators

A method of cleaning the mode spectra of whispering-gallery-mode (WGM) optical resonators has been devised to make such resonators more suitable for use as narrow-band optical filters. The method applies, more specifically, to millimeter- sized whispering-gallery-mode optical resonators that are made of crystalline electro-optical materials and have ultrahigh values of the resonance quality factor (Q). The mode spectrum of such a resonator is typically dense, consisting of closely spaced families of modes; as such, the spectrum is not well suited for narrow-band filtering, in which there is a need for strong rejection of side modes. Cleaning as used here signifies rarefying the spectrum so that what remains consists mostly of a single desired family of modes or, at worst, a few mode families that are more widely spaced in frequency than are the mode families in the original, non-rarefied spectrum. The spectrum-cleaning method exploits the fact that various WGM mode families occupy various positions near the equator at the rim of a resonator disk. In this method, a damper in the form of a prism or other polished piece of material having an index of refraction greater than that of the resonator material is placed in contact with the rim of the resonator at such a position that the Qs of most or all of the undesired mode families are greatly reduced while the Q of the desired mode family is reduced by only a tolerably small amount. In an alternative method that has been considered, the mode spectrum would be cleaned through special design of the shape of the rim, but fabrication of the rim in a special shape is a complicated task. The advantage of the present method, relative to the alternative method, is that special shaping of the rim is not necessary and the damping prism can be emplaced after the resonator has been fabricated.

Savchenkov, Anatoliy↗
NASA NTRS2011

Possible Charge-Exchange X-Ray Emission in the Cygnus Loop Detected with Suzaku

X-ray spectroscopic measurements of the Cygnus Loop supernova remnant indicate that metal abundances throughout most of the remnant s rim are depleted to approx.0.2 times the solar value. However, recent X-ray studies have revealed in some narrow regions along the outermost rim anomalously "enhanced" abundances (up to approx. 1 solar). The reason for these anomalous abundances is not understood. Here, we examine X-ray spectra in annular sectors covering nearly the entire rim of the Cygnus Loop using Suzaku (21 pointings) and XMM-Newton (1 pointing). We find that spectra in the "enhanced" abundance regions commonly show a strong emission feature at approx.0.7 keV. This feature is likely a complex of He-like O K(gamma + delta + epsilon), although other possibilities cannot be fully excluded. The intensity of this emission relative to He-like O K(alpha) appears to be too high to be explained as thermal emission. This fact, as well as the spatial concentration of the anomalous abundances in the outermost rim, leads us to propose an origin from charge-exchange processes between neutrals and H-like O. We show that the presence of charge-exchange emission could lead to the inference of apparently "enhanced" metal abundances using pure thermal emission models. Accounting for charge-exchange emission, the actual abundances could be uniformly low throughout the rim. The overall abundance depletion remains an open question. Subject headings: ISM: abundances ISM: individual objects (Cygnus Loop) ISM: supernova remnants X-rays: ISM atomic processes

Katsuda, Satoru↗
NASA NTRS2011

Evidence of Space Weathering in Regolith Breccias II: Asteroidal Regolith Breccias

Space weathering products, such as agglutinates and nanophaase iron-bearing rims are easily preserved through lithifcation in lunar regolith breccias, thus such products, if produced, should be preserved in asteroidal regotith breccias as well. A study of representative regolith breecia meteorites, Fayetteville (H4) and Kapoeta (howardite), was undertaken to search for physical evidence of space weathering on asteroids. Amorphous or npFe(sup 0)-bearing rim cannot be positively identified in Fayetteville, although possible glass rims were found. Extensive friction melt was discovered in the meteorite that is difficult to differentiate from weathered materials. Several melt products, including spherules and agglutinates, as well as one irradiated rim and one possible npFe(sup 0)-bearing rim were identified in Kapoeta. The existence of these products suggests that lunar-like space weathering processes are, or have been, active on asteroids.

Noble, Sarah K.↗
NASA NTRS2016

Space Weathering of Olivine: Samples, Experiments and Modeling

Olivine is a major constituent of chondritic bodies and its response to space weathering processes likely dominates the optical properties of asteroid regoliths (e.g. S- and many C-type asteroids). Analyses of olivine in returned samples and laboratory experiments provide details and insights regarding the mechanisms and rates of space weathering. Analyses of olivine grains from lunar soils and asteroid Itokawa reveal that they display solar wind damaged rims that are typically not amorphized despite long surface exposure ages, which are inferred from solar flare track densities (up to 10 (sup 7 y)). The olivine damaged rim width rapidly approaches approximately 120 nm in approximately 10 (sup 6 y) and then reaches steady-state with longer exposure times. The damaged rims are nanocrystalline with high dislocation densities, but crystalline order exists up to the outermost exposed surface. Sparse nanophase Fe metal inclusions occur in the damaged rims and are believed to be produced during irradiation through preferential sputtering of oxygen from the rims. The observed space weathering effects in lunar and Itokawa olivine grains are difficult to reconcile with laboratory irradiation studies and our numerical models that indicate that olivine surfaces should readily blister and amorphize on relatively short time scales (less than 10 (sup 3 y)). These results suggest that it is not just the ion fluence alone, but other variable, the ion flux that controls the type and extent of irradiation damage that develops in olivine. This flux dependence argues for caution in extrapolating between high flux laboratory experiments and the natural case. Additional measurements, experiments, and modeling are required to resolve the discrepancies among the observations and calculations involving solar wind processing of olivine.

Keller, L. P.↗
NASA NTRS2016

Propulsion Wheel Motor for an Electric Vehicle

A wheel assembly for an electric vehicle includes a wheel rim that is concentrically disposed about a central axis. A propulsion-braking module is disposed within an interior region of the wheel rim. The propulsion-braking module rotatably supports the wheel rim for rotation about the central axis. The propulsion-braking module includes a liquid cooled electric motor having a rotor rotatable about the central axis, and a stator disposed radially inside the rotor relative to the central axis. A motor-wheel interface hub is fixedly attached to the wheel rim, and is directly attached to the rotor for rotation with the rotor. The motor-wheel interface hub directly transmits torque from the electric motor to the wheel rim at a 1:1 ratio. The propulsion-braking module includes a drum brake system having an electric motor that rotates a cam device, which actuates the brake shoes.

Figuered, Joshua M.↗
DOE OSTI2024

Management of Risks Associated with Application of Novel Materials in Novel Operating Environments in Novel Reactor Designs

There is currently no widely agreed, detailed general method for licensing a novel plant incorporating novel materials (or materials being deployed in novel environments); in many such situations, there are no directly applicable engineering code cases for decision-makers (including regulators) to rely on. This paper discusses a framework for solving this problem that is based on the Reliability and Integrity Management (RIM) approach delineated in ASME BPVC Section XI Division 2. NRC Regulatory Guide 1.246, Rev. 0, endorses, with conditions, the subject portion of the ASME Code. The proposed framework is meant to support development of a licensing case by addressing certain technical challenges. The framework discussed here is compatible with the Licensing Modernization Project, but applying it in a specific case will call for advances in the state of practice, if not the state of the art. The RIM approach calls for applicants to (a) allocate reliability targets to plant structures, systems, and components (SSCs), (b) show that they are able to relate the currently observed physical condition of each SSC in the program to its failure probability well enough to determine whether the target reliability allocations are being satisfied, allowing for uncertainty related to the novelty of the materials/designs/operating environments, and (c) be able to demonstrate that the proposed program of surveillances will reliably detect unacceptable degradation of an SSC before SSC failure occurs. These challenges are discussed in the paper, and a potentially applicable modeling approach based on cumulative damage rather than failure rates is briefly illustrated.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Actinide Elemental Ratios of Spent Nuclear Fuel Samples by Resonance Ionization Mass Spectrometry

While resonance ionization mass spectrometry (RIMS) has demonstrated utility in measuring isotopic compositions of elements in complex matrices without the need for chemical separation to remove isobaric interferences, it has had limited application in measuring elemental compositions. The ability to determine elemental compositions via an in situ method like RIMS would be an exceptional asset in spent nuclear fuel analysis, where they are important in assessing reactor histories and whose chemical separation presents a radiological hazard. However, quantitative elemental analysis by RIMS requires special considerations because each element is ionized by its own set of lasers tuned to element specific resonant ionization wavelengths. We present the first comprehensive study of measuring elemental ratios by RIMS in spent nuclear fuel. All actinides produced by neutron capture are enhanced significantly radially from the center to the edge of a fuel pellet. This edge effect is not readily accessible by conventional bulk measurements.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗