Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reduction Potential”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Accumulation mechanisms for contaminants on weak-base hybrid ion exchange resins

Mechanism of hexavalent chromium removal (Cr(VI) as CrO 4 2- ) by the weak-base ion exchange (IX) resin ResinTech® SIR-700-HP (SIR-700) from simulated groundwater is assessed in the presence of radioactive contaminants iodine-129 (as IO 3 - ), uranium (U as uranyl UO 2 2+ ), and technetium-99 (as TcO 4 - ), and common environmental anions sulfate (SO 4 2- ) and chloride (Cl-). Batch tests using the acid sulfate form of SIR-700 demonstrated Cr(VI) and U(VI) removal exceeded 97%, except in the presence of high SO 4 2- concentrations (536 mg/L) where Cr(VI) and U(VI) removal decreased to ≥ 80%. However, Cr(VI) removal notably improved with co-mingled U(VI) that complexes with SO 4 2- at the protonated amine sites. These U–SO 4 2- complexes are integral to U(VI) removal, as confirmed by the decrease in U(VI) removal (<40%) when the acid chloride form of SIR-700 was used instead. Solid phase characterization revealed that CrO 4 2- is removed by IX with SO 4 2- complexes and/or reduced to amorphous Cr(III)(OH) 3 at secondary alcohol sites. Tc(VII)O 4 - and I(V)O 3 - also undergo chemical reduction, following a similar removal mechanism. Oxyanion removal preference is determined by the anion reduction potential (CrO 4 2 - >TcO 4 - >IO 3 - ), geometry, and charge density. For these reasons, 39% and 69% of TcO 4 - and 17% and 39% of IO 3 - are removed in the presence and absence of Cr(VI), respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Investigating uncertainties in human adaptation and their impacts on water scarcity in the Colorado river Basin, United States

The Colorado River Basin (CRB) supports the water supply for seven states and forty million people in the Western United States (US) and has been suffering an extensive drought for more than two decades. As climate change continues to reshape water resources distribution in the CRB, its impact can differ in intensity and location, resulting in variations in human adaptation behaviors. The feedback from human systems in response to the environmental changes and the associated uncertainty is critical to water resources management, especially for water-stressed basins. This paper investigates how human adaptation affects water scarcity uncertainty in the CRB and highlights the uncertainties in human behavior modeling. Our focus is on agricultural water consumption, as approximately 80% of the water consumption in the CRB is used in agriculture. We adopted a coupled agent-based and water resources modeling approach for exploring human-water system dynamics, in which an agent is a human behavior model that simulates a farmer’s water consumption decisions. We examined uncertainties at the system, agent, and parameter levels through uncertainty, clustering, and sensitivity analyses. The uncertainty analysis results suggest that the CRB water system may experience 13 to 30 years of water shortage during the 2019–2060 simulation period, depending on the paths of farmers’ adaptation. The clustering analysis identified three decision-making classes: bold, prudent, and forward-looking, and quantified the probabilities of an agent belonging to each class. The sensitivity analysis results indicated agents whose decision-making models require further investigation and the parameters with the higher uncertainty reduction potentials. Here, by conducting numerical experiments with the coupled model, this paper presents quantitative and qualitative information about farmers’ adaptation, water scarcity uncertainties, and future research directions for improving human behavior modeling.

Agent-based modeling↗
DOE OSTI2025

In-situ formation of stable interface towards Li-in anode for halide solid-state electrolyte

Halide-based solid-state electrolytes (SSEs) are promising candidates for next-generation all-solid-state lithium batteries (ASSLBs) due to their high ionic conductivity and chemical stability. However, their poor interfacial compatibility with lithium metal anode and Li-In alloy significantly hinder practical application due to the requirement for a protective interlayer. In this study, a novel approach to overcome this limitation is presented by introducing iron (Fe) doping into Li 3 InCl 6 (LIC), which enables direct and stable contact with lithium-indium (Li-In) metal without a protective interlayer. Thermodynamic and computational analyses identified Fe 3+ as a suitable dopant based on its similar reduction potential to In 3+ and structural compatibility within the halide lattice. The synthesized 10 at. % Fe-doped LIC exhibits high phase purity, retained ionic conductivity, and notably improved interfacial stability. Full-cell tests using Fe-LIC achieve over 300 cycles with 80 % capacity retention. At the same time, symmetric Li-In/ Fe-LIC/ Li-In cells sustain over 500 h of operation, representing the first reported long-term cycling of LIC-based ASSLB without a protective interlayer. In conclusion, this work establishes Fe doping as an effective strategy to stabilize halide SSEs of In system against Li-In alloy, thereby simplifying cell architecture and advancing the development of safer, high-performance halide-based solid-state electrolytes.

Halide-based solid-state electrolytes↗
DOE OSTI2022

How do super concentrated electrolytes push the Li-ion batteries and supercapacitors beyond their thermodynamic and electrochemical limits?

Increasing the energy density of energy storage devices is currently the key target of many battery and supercapacitor research activities. For both types of devices, the electrochemical stability window (ESW) determines the effective energy density of the device. ESWs are defined by the effective oxidation and reduction potentials of the electrolyte, which are controlled by many various factors, including the HOMO/LUMO (highest/lowest unoccupied molecular orbital) energies of the electrolyte molecules, the nature of the electrode/electrolyte interphases, and other physicochemical properties. The concentration of the electrolyte would affect the HOMO/ LUMO levels thus also change the ESW. A higher concentration of salt induces specific arrangements among the anion, cation, and solvent molecules of an electrolyte, altering the bulk behavior of the electrolyte, resulting in drastic change in the electrode interfaces. These uniquely modified physicochemical properties extend the ESW in several different ways, including the enhancement in the kinetic stability of the electrodes, as well as the thermodynamic and Nernst shifts of the oxidation/reduction potentials of the electrolyte. For organic electrolytes, it is the reduced amount of free solvent molecules that plays the key role in such changes; whereas for aqueous electrolytes, it is the scarcity of free water molecules and the reduced water activity that control the key properties of the electrolyte. Here, we focus on elucidating the fundamental structural changes occurring within an electrolyte system with increasing salt concentrations. The underlying mechanisms which not only facilitates the extension of the ESW, but also enables higher rate capabilities and mitigates aluminum dissolution for batteries with organic electrolytes, are meticulously explained. Further, we thoroughly discuss the importance of high-voltage stability in aqueous battery systems by exploiting the changed properties observed with higher concentrations of salts. To finish, high-voltage supercapacitors enabled by superconcentrated electrolytes are also explored.

25 ENERGY STORAGE↗
DOE OSTI2026

Circular economy pathways for decarbonizing aluminum and steel automotive body sheet components in the United States

Decarbonizing vehicle production is essential to reducing automotive sector emissions. This study quantifies greenhouse gas (GHG) emissions from aluminum and steel auto-body sheet components produced in the US. It evaluates the effectiveness of circular economy (CE) strategies (greater closed-loop recycling of pre-consumer scrap, post-consumer scrap, and increased manufacturing yields) to reduce supply chain emissions across different process technology and electricity grid decarbonization pathways. We combine dynamic material flow analysis (2025–2050) with cradle-to-gate life-cycle modeling to assess production emissions and the potential reductions associated with the CE strategies under frozen, moderate, and aggressive technology and grid decarbonization scenarios. Current emissions intensities are estimated at approximately 12.3 kg.CO₂eq/kg of aluminum and 4.3 kg.CO₂eq/kg of steel sheet embedded in the vehicle. Under the frozen decarbonization scenario and current levels of circularity, annual emissions attributable to US aluminum and steel auto-body sheet supply chains could rise by 54 % and 18 % respectively by 2050. Rapid deployment of the CE strategies can cut these annual emissions in 2050 by 52 % for aluminum and 44 % for steel. However, scrap quality constraints lead to saturation points, limiting these benefits unless addressed. Aggressive deployment of low-carbon production technologies and a low-carbon grid reduces the relative benefit of implementing the CE strategies; however, even under the aggressive technology and grid decarbonization scenario, the CE strategies reduce annual emissions by a further 23 %-54 % by 2050. These findings highlight the urgent need to integrate CE strategies into the sheet metal supply chain to support decarbonization efforts and help meet climate targets.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

Microbial potentiometric sensor: A new approach to longstanding challenges

The underlying hypothesis of this study is that simple potentiometric measurements between sensing electrodes and a shared reference electrode - Microbial Potentiometric Sesnor (MPS) system - can be employed in a long-term, continuous mode of operation to resolve the spatial and temporal changes in environmental systems. To address the hypothesis, (1) a conceptual description of the MPS system and its postulated principle of operation are provided; (2) the MPS system performance is documented under controlled laboratory conditions; and (3) the capabilities of the MPS system are documented under quiescent and dynamic field condition. In a laboratory setting, the variability among different MPS signals was insignificant confirming the postulated high accuracy and reproducibility of the sensor performance. It also demonstrated statistically significant correlations with dissolved oxygen (DO) and oxidation-reduction potential (ORP) sensors, while showing capabilities of operating under anoxic and anaerobic conditions. Regardless of their locations in the model wetland system, three MPS sensors functioned without interruption and cleaning for a period >2 years, and thus demonstrating long-term durability of the MPS technology. In real batch-wastewater treatment facility, the deployed MPS system signals were able to describe the organic carbon trends and correlate with each treatment phase in a cycle. Data reproducibility and reliability exceeded the expectations better describing the carbon treatment levels than the DO and ORP sensors (p < 4.4 × 10 –162 vs phase adjusted p < 3.0 × 10 –58 ). While MPS signals correlate with specific parameters that describe the local process or environments, it is more prudent to employ both the magnitude and pattern of a composite signal like the MPS signal describe the change to reflect any shift in the local environment. Finally, when compared to a baseline pattern, this change in signal magnitude and pattern reveals important information that can be employed to tailor and optimize any condition or process which involves microorganisms.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Lead leaching and electrowinning in acetic acid for solar module recycling

It is imperative to recover lead (Pb) contained in end-of-life solar modules. In this paper, a two-step leaching and electrowinning process using acetic acid is investigated for Pb recovery. Acetic acid with hydrogen peroxide can dissolve Pb quickly and, under some conditions, in a matter of minutes. Pb electrowinning has been successfully demonstrated from aqueous solutions of 0.009 M lead(II) acetate with 0–10% v/v acetic acid. Pb-containing deposits are found on both the copper cathode and graphite anode. X-ray diffraction, energy-dispersive X-ray spectroscopy, and Fourier transform infrared spectroscopy confirm the presence of metallic Pb and Pb(II) oxide (PbO) co-deposits on the cathode. Further, there is also the formation of lead subacetate on the cathode under certain conditions. On the anode, the deposit consists of lead(IV) oxide and superoxide (PbO 2 and Pb 1–x O 2 ). A Pb recovery rate of 99% is achieved in 0.009 M lead(II) acetate solutions with 10% v/v acetic acid by applying a reduction potential of either –0.8 V or –1.0 V versus the silver/silver chloride reference electrode for 24h. Pb leaching with acetic acid is also demonstrated from milled silicon solar modules.

14 SOLAR ENERGY↗
DOE OSTI2021

Multi-scale evaluation of diesel commuter rail fuel use, emissions, and eco-driving

Diesel commuter rail emissions affect populations near rail corridors. An approach is demonstrated to quantify mesoscale and microscale diesel commuter rail fuel use and emission rates (FUERs) of CO 2 , CO, NO x , particulate matter, and total hydrocarbons based on two U.S. systems. A speed trajectory simulator, an energy model, and an emissions model were calibrated, evaluated, and applied. FUERs and potential reductions from eco-driving were quantified based on simulated trajectories. Hotspots were defined as sections with ≥ 90 th percentile of section-average FUERs by species. A few key variables explain 74–80% of variability in mesoscopic and microscopic FUERs. On average, FUERs are 7–8 times greater for hotspots than non-hotspots. Eco-driving was estimated to reduce segment-average FUERs by 3–33% and eliminate 2–11% hotspots. However, mesoscale oriented eco-driving can, at some locations, increase microscopic FUERs. The approach is adaptable to other diesel commuter rail systems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Titanium Niobium Oxide: From Discovery to Application in Fast-Charging Lithium-Ion Batteries

Lithium-ion batteries are essential for portable technology and are now poised to disrupt a century of combustion-based transportation. The electrification revolution could eliminate our reliance on fossil fuels and enable a clean energy future; advanced batteries would facilitate this transition. However, owing to the demanding performance, cost, and safety requirements, it is challenging to translate new materials from laboratory prototypes to industrial-scale products. This Perspective describes that journey for a new lithium-ion battery anode material, TiNb 2 O 7 (TNO). TNO is intended as an alternative to graphite or Li 4 Ti 5 O 12 with better rate and safety characteristics than the former and higher energy density than the latter. The high capacity of TNO stems from the multielectron redox of Nb 5+ to Nb 3+ , its operating voltage window well above the Li + /Li reduction potential prevents lithium dendrite formation, and its open crystal structure leads to high-power performance. Nevertheless, the creation of a practical TNO anode was nonlinear and nontrivial. Its history is built on 30 years of fundamental science that preceded its application as a battery anode, and its battery development included a nearly 30-year gap. The insights and lessons contained in this Perspective, many of them acquired firsthand, serve two purposes: (i) to unite the disparate studies of TiNb 2 O 7 into a coherent modern understanding relevant to its application as a battery material and (ii) to highlight briefly some of the challenges faced when scaling up a new material that affect TiNb 2 O 7 as well as new electrode candidates more generally.

25 ENERGY STORAGE↗
DOE OSTI2025

Spectroscopic Investigation into P(NDI2OD-T2) Charge Localization

P(NDI2OD-T2), commonly referred to as N2200, stands out as a promising electron-transporting (n-type) polymer for low-cost, flexible (photo)electrochemical applications due to its reversible two-electron reduction and high electron mobility. UV–vis spectroelectrochemistry in the tetrabutyl ammonium hexafluorophosphate/acetonitrile electrolyte shows two sets of chemically reversible redox signals in the cyclic voltammetry corresponding to the reduction of the neutral polymer film to polaronic and bipolaronic species. These electrochemical signatures suggest a distinct electronic reorganization upon reduction (polaron/bipolaron formation), highlighting the need for molecular-level insights into how charges are accommodated within the polymer backbone. While it has been previously hypothesized that charge predominantly localizes on the naphthalene diimide (NDI) unit during reductive charging, specific changes in atomic environments that confirm this localization have not been characterized in n-type polymers. Herein, we use near-edge X-ray absorption fine structure (NEXAFS) spectroscopy to probe electronic transitions in an electrochemically charged polymer to deduce charge localization. The O K-edge (1s) spectra exhibit two distinct π* peaks; the intensity of the lower-energy π* a peak that corresponds to an excitation to a largely localized carbonyl state decreases with reductive potentials relative to the higher-energy π* b peak. We corroborate this with Raman spectroscopy at different potentials, which shows a decrease in intensity on the C–C/C═C and C═O stretching bands of NDI as well as a red shift of the carbonyl band due to the formation of a polaron on the NDI. Additionally, new Raman active NDI signals associated with elongated C═O and C═C bonds are observed at lower energy during the formation of charged states. Together with theoretical calculations, these findings show that the injected charge spatially localizes on the NDI units and is dominantly distributed on the carbonyl groups. In conclusion, the combination of NEXAFS, optical and vibrational spectroscopies, and theoretical calculations is generalizable to other pi-conjugated polymers and can identify charge localization for the further development of organic semiconductors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Translating a Material Discovery into a Commercial Product in the Modern Lithium-ion Battery Market

Lithium-ion batteries are essential for portable technology and are now poised to disrupt a century of combustion-based transportation. The electrification revolution could eliminate our reliance on fossil fuels and enable a clean energy future; advanced batteries would facilitate this transition. However, owing to the demanding performance, cost, and safety requirements, it is challenging to translate new materials from laboratory prototypes to commercial products. This Perspective describes that journey toward commercialization for a new lithium-ion battery anode material, TiNb2O7 (TNO). TNO is intended as an alternative to graphite or Li4Ti5O12 with better rate and safety characteristics than the former, and higher energy density than the latter. The high capacity of TNO stems from multielectron redox of Nb5+ to Nb3+, its operating voltage window well above Li+/Li reduction potential prevents lithium dendrite formation, and its open crystal structure leads to high-power performance. Nevertheless, the creation of a practical TNO anode was non-linear and non-trivial. Its history is built on 30 years on fundamental science that preceded its application as a battery, and its battery development included a nearly 30-year gap. The insights and lessons 2 contained in this Perspective, many of them acquired firsthand, serve two purposes: (i) to unite the disparate studies of TiNb2O7 into a coherent modern understanding relevant to its application as a battery material and (ii) to highlight some of the considerations of commercializing a new material that affect TiNb2O7 as well as new electrode candidates more generally.

Griffith, Kent J.↗
DOE OSTI2021

Life Cycle Analysis of Electrofuels: Fischer–Tropsch Fuel Production from Hydrogen and Corn Ethanol Byproduct CO 2

Electrofuels from renewable H 2 and waste CO 2 streams are of increasing interest because of their CO 2 emissions reduction potentials compared to fossil counterparts. This study evaluated the well-to-wheel (WTW) greenhouse gas (GHG) emissions of Fischer-Tropsch (FT) fuels from various electrolytic H 2 pathways and CO 2 sources, using various process designs (i.e., with and without H 2 recycle) and system boundaries. Two systems with different boundaries were considered: a stand-alone plant (with CO 2 from any source) and an integrated plant with corn ethanol production (supplying CO 2 ). The FT fuel synthesis process was modeled using Aspen Plus, which showed that 45% of the carbon in CO 2 can be fixed in the FT fuel, with a fuel production energy efficiency of 58%. Using nuclear or solar/wind electricity, the stand-alone FT fuel production from various plant designs can reduce WTW GHG emissions by 90-108%, relative to petroleum fuels. When integrating the FT fuel production process with corn ethanol production, the WTW GHG emissions of FT fuels are 57-65% lower compared to petroleum counterparts. This study highlights the sensitivity of the carbon intensity of FT fuels to the system boundary selection (i.e., stand-alone vs integrated), which has different implications under various GHG emission credit frameworks.

08 HYDROGEN↗
DOE OSTI2025

Alizarin Multilayers Adsorbed onto Glassy Carbon Electrodes for Electrochemical Sequestration of Manganese, Sodium, and Lithium Cations

The development of efficient methods for metal ion recovery and water remediation is critical for addressing the nation’s urgent need for secure domestic supply chains, overcoming critical materials challenges, and ensuring resilient manufacturing. Here, we present a novel approach for synthesizing stable Alizarin (Alz, 1,2-dihydroxy anthraquinone) multilayers on glassy carbon electrodes (GCEs) for electrochemical sequestration of manganese, sodium, and lithium cations. Alz-GCEs exhibit negatively shifted reduction potentials, indicating strong interactions between Alz and metal cations through metal-coupled electron transfer (MCET) mechanisms. The cation binding interactions and redox behavior of these electrodes were investigated using cyclic voltammetry (CV) and density functional theory (DFT) calculations. Our results demonstrate that Alz forms multilayer structures on GCEs with redox properties that are modulated by the presence of metal cations in the electrolyte. DFT calculations provide insights into the electrochemical mechanism, indicating both stepwise and concerted pathways for metal binding. The findings highlight the potential of Alz-GCEs for efficient and selective metal ion capture, which could be useful for developing sustainable materials for critical metal recovery and water remediation. This work suggests that redox-mediated organic adlayers are promising candidates for advancing electrochemical separation technologies of metal ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Synthesis, Characterization, and Biological Activity of Hybrid Thiosemicarbazone–Alkylthiocarbamate Metal Complexes

A series of hybrid ligands (H 2 L 1 –H 2 L 3 ) derived from 4-methyl-3-thiosemicarbazide and hydrazinecarbothioic acid O-alkyl esters were synthesized and characterized by NMR. The ligands were chelated with copper (4–6), nickel (7–9), and zinc (10–12) and characterized by spectroscopy, electrochemistry, and single crystal X-ray crystallography. The chelated metals displayed substantial anodic shifts in the Cu II/I reduction potential of ~160 mV relative to their bis(thiosemicarbazone) analogues. The metal chelates 4–12 were evaluated for potential anticancer activity by MTT assays, and selected results were confirmed by clonogenic and trypan blue assays. The copper derivatives 4 and 6 were found to have potent and cancer-selective antiproliferative effects, with GI 50 values less than 100 nM in A549 lung adenocarcinoma cells compared with at least 20-fold less activity in IMR90 nonmalignant lung fibroblasts. In comparison, the nickel complexes were much less active and had little cancer-selectivity. Varying by ligand, the zinc complexes were less potent or had comparable activity compared to that of the corresponding copper complex. UV–visible spectroscopy indicated that zinc complex 10 was transmetalated in the presence of equimolar copper, whereas nickel complex 7 was not. Copper complexes 4 and 6 were also assessed in the NCI60 screen and were found to have cytotoxic activity against most solid tumor cell lines. In MTT assays, 4 and 6 were substantially more active against A549 cancer cells than Cu(ATSM) and were more cancer-selective (for A549 compared to IMR-90) than Cu(GTSM). Finally, our results suggest that hybrid thiosemicarbazone–alkylthiocarbamate copper complexes have potential for development as new anticancer agents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Ligand Noninnocence in β-Diketiminate and β-Diketimine Copper Complexes

Metal–ligand cooperative systems have a long precedent in catalysis, with the classification depending on the site of substrate bond cleavage and formation and on redox state changes. Recently, our group reported the participation of a β-diketiminate ligand in chemical bonding to heterocumulenes such as CO 2 and CS 2 by tricopper complexes, leading to cooperative catalysis. Herein, we report the reactivity of these copper clusters, [Cu 3 EL] – (E = S, Se; L = tris(β-diketiminate) cyclophane ligand), toward other electrophiles, viz. alkyl halides and Brønsted acids. We identified a family of ligand-functionalized complexes, Cu 3 EL (R) (R = primary alkyls), and a series of disubstituted products, Cu 3 EL (R) 2 , through single-crystal X-ray diffraction, mass spectrometry, and infrared and UV–visible spectroscopy. Furthermore, as part of mechanistic studies on these alkylation reactions, we evaluated the acid–base reactivity of these complexes and the influence of the backbone substitution on the reduction potential. Implications of these findings for ligand noninnocence and the relevance of the metal core as a cofactor for the ligand’s reactivity are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Electronic Structure Tuning of Lanthanidocene Photocatalysts for C–F Bond Cleavage

A set of nine new robust, tunable cerium complexes supported by an ansa-bis(cyclopentadienyl) ligand, [Me 2 Si(η 5 -Cp R ) 2 ]CeX ( an Cp R )CeX, are excellent homogeneous visible-light photocatalysts for the monodefluoroalkylation of trifluorotoluene with Mg(CH 2 C 6 H 5 ) 2 THF 2 (R = Me 4 , SiMe 3 , X = N(SiMe 3 ) 2 (N″), X = CH(SiMe 3 ) 2 (R''), Cl, OC 6 H 2 t Bu 2 -2,6,Me-4 (OAr)). The trends in photocatalytic activity within the series are explained by photophysical spectroscopic analyses. The aryloxide complex [Me 2 Si(Cp SiMe3 ) 2 ]CeOAr, which has the highest activity (95% substrate conversion in 27 h), shows the most negative (most reducing) excited-state reduction potential (-2.71 V vs Fc). The precatalyst excited-state lifetimes are also exceptionally long. Detailed photoluminescence, NMR spectroscopic, and kinetic studies on chloride [Me 2 Si(Cp Me4 ) 2 ]CeCl suggest that the "ate" complex [{Me 2 Si(Cp Me4 ) 2 } 2 Ce III ClBn][MgBn] is the active catalyst in the alkylation reaction to form PhCF 2 CH 2 Ph with high selectivity over PhCF 2 H. Finally, the reaction rates are up to 30 times higher than previously reported for organometallic rare-earth photocatalysts for these Ce complexes and comparable to established Ir-based photoredox systems.

catalysts↗
DOE OSTI2020

The H•/H– Redox Couple and Absolute Hydration Energy of H–

A supermolecule-continuum approach with water clusters up to n = 16 H2O molecules has been used to predict the absolute hydration free energies at 298 K ($\Delta$G hyd ) of both hydrogen (H•) and hydride (H - ) to be 4.6 and -78 ± 2 kcal/mol, respectively. These values are combined with a high accuracy prediction of the gas phase electron affinity ($\Delta$G gas,298K = -16.9 kcal/mol) to determine the aqueous electron affinity of H• of 99.5 ± 2 kcal/mol, which yields a reduction potential for H• vs SHE of -0.03 ± 0.15 V. This value is in agreement within 0.2 V with most estimates obtained using a wide variety of approaches. The results of this study can be used to improve the absolute hydricity scale in water which provides additional insights into how a putative hydride interacts with solvent, but do not change the ability to predict the relative reactivity of two species using relative hydricity scales.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Reductive Dynamic and Static Excited State Quenching of a Homoleptic Ruthenium Complex Bearing Aldehyde Groups

A new homoleptic Ru polypyridyl complex bearing two aldehyde groups on each bipyridine ligand, [Ru(dab) 3 ](PF 6 ) 2 , where dab is 4,4′-dicarbaldehyde-2,2′-bipyridine, was synthesized, characterized, and utilized for iodide photo-oxidation studies. In acetonitrile (CH 3 CN) solution, the complex displayed an intense metal-to-ligand charge transfer (MLCT) absorbance maximum at 475 nm (ε = 22,000 M –1 cm –1 ) and an infrared (IR) band at 1712 cm –1 assigned to the pendent aldehyde groups. Visible light excitation in air-saturated solution resulted in room temperature photoluminescence (PL) with a maximum at 675 nm, a quantum yield, ϕ PL = 0.048, and an excited state lifetime, τ ο = 440 ns, from which radiative and nonradiative relaxation rate constants were extracted, k r = 9.1 × 10 4 s –1 and knr = 1.8 × 10 6 s –1 . Pulsed visible light excitation yielded transient UV–vis and IR absorption spectra consistent with an MLCT excited state; relaxation occurred with the maintenance of two isosbestic points in the visible region, and a lifetime that agreed with that measured by time-resolved PL. Cyclic voltammetry studies in a CH 3 CN solution with 0.1 M TBAPF 6 electrolyte revealed a quasi-reversible oxidation, E°(Ru III/II ) = +1.25 V vs. Fc +/0 , and three sequential one-electron reductions at −1.10, −1.25, and −1.54 V vs. Fc +/0 . Here, an excited state reduction potential of E°(Ru *2+/+ ) = +0.89 V vs. Fc +/0 was estimated with the Rehm–Weller expression. Titration of tetrabutylammonium iodide, TBAI, into a CD 3 CN solution of [Ru(dab) 3 ](PF 6 ) 2 resulted in significant shifts in the aldehyde H atom and 3,3′-biypridyl resonances that were analyzed with a 1:1 equilibrium model, from which K eq = 460 M –1 was extracted, increasing to 5800 M –1 when the solvent was changed to acetone-d 6 . Iodide titrations resulted in a significant quenching of the [Ru(dab) 3 ] *2+ lifetime and quantum yield in both CH 3 CN and acetone solvents. In CH 3 CN, the quenching was mainly dynamic and well described by the Stern–Volmer model, from which a quenching rate constant, k q , of 4.5 × 10 10 M –1 s –1 and an equilibrium constant, K eq , of 8.3 × 10 3 M –1 were obtained. In acetone, the static quenching pathway by iodide was greatly enhanced, with a K eq of 1.2 × 10 4 M –1 and a higher k q of 9.2 × 10 10 M –1 s –1 .

Aldehydes↗