Search NASA⌕ Search

SEARCH · Search NASA

Results for “Resonance structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Harmonic multiplication using resonant tunneling

This paper demonstrates the use of resonant-tunneling diodes as varistors for harmonic multiplication. It is shown that efficient odd-harmonic conversion is possible and that even harmonics do not appear because of the antisymmetry of the current-voltage (I-V) curve. It is also shown that, with the proper choice of resonant-tunneling structure and pump amplitude, most of the harmonic output power can be confined to a single odd-harmonic frequency. Fifth-harmonic multiplication was demonstrated with an output at 21.75 GHz and a power conversion efficiency of 0.5 percent, and a fifth-harmonic efficiency of 2.7 percent was achieved in a circuit simulation using an improved I-V curve.

Sollner, T. C. L. G.↗
NASA NTRS1988

Far-infrared heterodyne receivers

The development of open resonator mixer structures and laser local oscillators has made heterodyne spectroscopy at far infrared (FIR) wavelengths between 150 and 400 microns a reality. Several laser based receivers are now part of the instrument complement flown aboard the Kuiper Airborne Observatory. Lasers are eminently practical as FIR local oscillators whenever there is close frequency coincidence between a strong laser transition and the Doppler-shifted astronomical line. While it is desirable to have continuous frequency coverage in a spectrometer, it should be recognized that most astronomers will focus their interest on the few spectral lines deemed optimum for probing the cosmos. Ultimately, the development of a reliable thin film technology for the new high temperature oxide superconductors may favor SIS-type devices for all wavelengths in future space based FIR receivers.

Betz, Albert↗
NASA NTRS1991

Tunneling calculations for GaAs-Al(x)Ga(1-x) as graded band-gap sawtooth superlattices

Quantum mechanical tunneling calculations for sawtooth (linearly graded band-gap) and step-barrier AlGaAs superlattices were performed by means of a transfer matrix method, within the effective mass approximation. The transmission coefficient and tunneling current versus applied voltage were computed for several representative structures. Particular consideration was given to effective mass variations. The tunneling properties of step and sawtooth superlattices show some qualitative similarities. Both structures exhibit resonant tunneling, however, because they deform differently under applied fields, the J-V curves differ.

Forrest, Kathrine A.↗
NASA NTRS1992

Getting up to speed in hypersonic structures

An overview is presented of some of the hypersonic technology that will become the baseline for more advanced commercial aerospace systems and new military transportation systems for carrying astronauts and equipment into space. Attention is given to the X-15 aeronautical research program, the X-20 DYNA-SOAR, and the current X-30 National Aerospace Plane. Consideration is given to FEM analysis methods, modal testing conducted to measure the structure's resonant frequencies, dampings, and mode shapes, and high-temperature, high-speed wind tunnel testing and in-flight measurement of steady and unsteady pressures at Mach 3 and above.

Kehoe, Michael W.↗
NASA NTRS1993

A low noise 665 GHz SIS quasi-particle waveguide receiver

Recent results on a 565-690 GHz SIS heterodyne receiver employing a 0.36 micron(sup 2) Nb/AlOx/Nb SIS tunnel junction with high quality circular non-contacting back short and E-plane tuners in a full height wave guide mount are reported. No resonant tuning structures were incorporated in the junction design at this time, even though such structures are expected to help the performance of the receiver. The receiver operates to at least the gap frequency of Niobium, approximately 680 GHz. Typical receiver noise temperatures from 565-690 GHz range from 160K to 230K with a best value of 185K DSB at 648 GHz. With the mixer cooled from 4.3K to 2K the measured receiver noise temperatures decreased by approximately 15 percent, giving roughly 180K DSB from 660 to 680 GHz. The receiver has a full 1 GHz IF pass band and was successfully installed at the Caltech Submillimeter Observatory in Hawaii.

Kooi, J. W.↗
NASA NTRS2005

Feed Structure For Antennas

A novel feed structure, for an antenna having a resonant electric field structure, comprising a patch element, an integrated circuit attached to the patch element, at least one inner conductor electrically connected to and terminating at the integrated circuit on a first end of the at least one inner conductor, wherein the at least one inner conductor extends through and is not electrically connected to the patch element, and wherein the at least one inner conductor is available for electrical connectivity on a second end of the at least one inner conductor, and an outer conductor electrically connected to and terminating at the patch element on a first end of the outer conductor, wherein the outer conductor is available for electrical connectivity on a second end of the outer conductor, and wherein the outer conductor concentrically surrounds the at least one inner conductor from the second end of the at least one inner conductor available for electrical connectivity to the first end of the outer conductor terminating at the patch element.

Patrick W Fink↗
NASA NTRS1995

Spectroscopic Parameters of H2S Polyads Between 3400 and 8000 cm x 10 to -1 exponent

The absorption spectra of hydrogen sulfide from 0.8 to 5 micro- meters were recorded with three spectral resolutions using the Fourier transform spectrometer at Kitt Peak National Observatory. Twenty bands were previously assigned so that accurate band origins and vi- brational parameters could be determined. Described are the analyses of the rotational structure of resonating hydrogen sulfide states.

molecular spectroscopy hydrogen sulfide absorption↗
NASA NTRS2011

Infrared-Bolometer Arrays with Reflective Backshorts

Integrated circuits that incorporate square arrays of superconducting-transition- edge bolometers with optically reflective backshorts are being developed for use in image sensors in the spectral range from far infrared to millimeter wavelengths. To maximize the optical efficiency (and, thus, sensitivity) of such a sensor at a specific wavelength, resonant optical structures are created by placing the backshorts at a quarter wavelength behind the bolometer plane. The bolometer and backshort arrays are fabricated separately, then integrated to form a single unit denoted a backshort-under-grid (BUG) bolometer array. In a subsequent fabrication step, the BUG bolometer array is connected, by use of single-sided indium bump bonding, to a readout device that comprises mostly a superconducting quantum interference device (SQUID) multiplexer circuit. The resulting sensor unit comprising the BUG bolometer array and the readout device is operated at a temperature below 1 K. The concept of increasing optical efficiency by use of backshorts at a quarter wavelength behind the bolometers is not new. Instead, the novelty of the present development lies mainly in several features of the design of the BUG bolometer array and the fabrication sequence used to implement the design. Prior to joining with the backshort array, the bolometer array comprises, more specifically, a square grid of free-standing molybdenum/gold superconducting-transition-edge bolometer elements on a 1.4- m-thick top layer of silicon that is part of a silicon support frame made from a silicon-on-insulator wafer. The backshort array is fabricated separately as a frame structure that includes support beams and contains a correspond - ing grid of optically reflective patches on a single-crystal silicon substrate. The process used to fabricate the bolometer array includes standard patterning and etching steps that result in the formation of deep notches in the silicon support frame. These notches are designed to interlock with the support beams on the backshort-array structure to provide structural support and precise relative positioning. The backshort-array structure is inserted in the silicon support frame behind the bolometer array, and the notches in the frame serve to receive the support beams of the backshort-array structure and thus determine the distance between the backshort and bolometer planes. The depth of the notches and, thus, the distance between the backshort and bolometer planes, can be tailored to a value between 25 to 300 m adjusting only a few process steps. The backshort array is designed so as not to interfere with the placement of indium bumps for subsequent indium bump-bonding to the multiplexing readout circuitry

Miller, Timothy M.↗
NASA NTRS1987

Theory of resonant tunneling in a variably spaced multiquantum well structure - An Airy function approach

A theoretical study of resonant tunneling in multilayered heterostructures is presented based on an exact solution of the Schroedinger equation under the application of a constant electric field. By use of the transfer matrix approach, the transmissivity of the structure is determined as a function of the incident electron energy. The approach presented herein is easily extended to many layer structures where it is more accurate than other existing transfer matrix or Wentzel-Kramers-Brillouin (WKB) models. The transmission resonances are compared to the bound-state energies calculated for a finite square well under bias using either an asymmetric square-well model or the exact solution of an infinite square well under the application of an electric field. The results show good agreement with other existing models as well as with the bound-state energies. The calculations were then applied to a new superlattice structure, the variably spaced superlattice energy filter, which is designed such that under bias the spatial quantization levels fully align. Based on these calculations, a new class of resonant tunneling superlattice devices can be designed.

Brennan, K. F.↗
NASA NTRS1984

The direct measurement of the 3 3P0-3 3P1 fine-structure interval and the gJ-factor of atomic silicon by laser magnetic resonance

The J - 1 fine structure interval and the g-factor of the 3P1 state have been determined with high precision in the present laser magnetic resonance measurements of the ground 3p2 3P multiplet of atomic Si. Delta-E(3P1-3P0) = 2,311,755.6(7) MHz, and gJ(3P1) = 1.500830(70). Single-configuration calculations of gJ for 3P1 and 3P2 yield a value for the latter which, at 1.501095, is noted to differ by an unexpectedly large margin from the experimental value.

Evenson, K. M.↗
DOE OSTI2025

Exploring baryon resonances with transition generalized parton distributions: status and perspectives

QCD gives rise to a rich spectrum of excited baryon states. Understanding their internal structure is important for many areas of nuclear physics, such as nuclear forces, dense matter, and neutrino-nucleus interactions. Generalized parton distributions (GPDs) are an established tool for characterizing the QCD structure of the ground-state nucleon. They are used to create 3D tomographic images of the quark/gluon structure and quantify the mechanical properties such as the distribution of mass, angular momentum, and forces in the system. Transition GPDs extend these concepts to N → N* transitions and can be used to characterize the 3D structure and mechanical properties of baryon resonances. They can be probed in high-momentum-transfer exclusive electroproduction processes with resonance transitions e + N → e' + M + N*, such as deeply-virtual Compton scattering (M = γ) or meson production (M = π, K, etc.), and in related photon/hadron-induced processes. This White Paper describes a research program aiming to explore baryon resonance structure with transition GPDs. This includes the properties and interpretation of the transition GPDs, theoretical methods for structures and processes, first experimental results from JLab 12 GeV, future measurements with existing and planned facilities (JLab detector and energy upgrades, COMPASS/AMBER, EIC, EicC, J-PARC, LHC ultraperipheral collisions), and the theoretical and experimental developments needed to realize this program.

Experimental Nuclear Physics↗
NASA NTRS2011

Auroral Current and Electrodynamics Structure (ACES) Observations of Ionospheric Feedback in the Alfven Resonator

In 2009, the Auroral Current and Electrodynamics Structure (ACES) High and Low sounding rockets were launched from the Poker Flat Rocket Range (PFRR) in Alaska, with the science objective of gathering in-situ data to quantify current closure in a discrete auroral arc. As ACES High crossed through the return current of an arc (that was monitored using an all sky camera from the ground at Fort Yukon), its instruments recorded clear Alfv nic signatures both poleward and equatorward of the return current region, but not within the main region of the return current itself. These data provide an excellent opportunity to study ionospheric feedback and how it interacts with the Alfv n resonator. We compare the observations with predictions and new results from a model of ionospheric feedback in the ionospheric Alfv n resonator (IAR) and report the significance and impact of these new data for the Magnetosphere-Ionosphere Coupling in the Alfv n Resonator (MICA) rocket mission to launch from PFRR this winter. MICA s primary science objectives specifically focus on better understanding the small-scale structure that the model predicts should exist within the return current region.

Cohen, Ian J.↗
NASA NTRS2004

Investigations of High Pressure Acoustic Waves in Resonators with Seal-Like Features

1) Standing waves with maximum pressures of 188 kPa have been produced in resonators containing ambient pressure air; 2) Addition of structures inside the resonator shifts the fundamental frequency and decreases the amplitude of the generated pressure waves; 3) Addition of holes to the resonator does reduce the magnitude of the acoustic waves produced, but their addition does not prohibit the generation of large magnitude non-linear standing waves; 4) The feasibility of reducing leakage using non-linear acoustics has been confirmed.

Daniels, Christopher C.↗
NASA NTRS1976

The waveguide laser - A review

The present article reviews the fundamental physical principles essential to an understanding of waveguide gas and liquid lasers, and the current technological state of these devices. At the present time, waveguide laser transitions span the visible through submillimeter regions of the wavelength spectrum. The introduction discusses the many applications of waveguide lasers and the wide variety of laser configurations that are possible. Section 1 summarizes the properties of modes in hollow dielectric waveguides of circular, rectangular, and planar cross section. Section 2 considers various approaches to optical feedback including internal and external mirror Fabry-Perot type resonators, hollow waveguide distributed feedback structures, and ring-resonant configurations. Section 3 discusses those aspects of molecular kinetic and laser theory pertinent to the design and optimization of waveguide gas lasers.

Degnan, J. J.↗
DOE OSTI2024

Fine structure of current noise spectra in nanoelectromechanical resonators

Here, we study the frequency-dependent noise of a suspended carbon nanotube quantum dot nanoelectromechanical resonator induced by electron-vibration coupling. Using a rigorous Keldysh diagrammatic technique, we establish a formal framework connecting the vibrational properties to electrical measurements. We find that the noise power spectrum exhibits a narrow resonant peak at the frequency of the vibrational modes. However, this fine structure tends to disappear due to a coherent cancellation effect when the tunneling barriers are tuned to a symmetric point. Notably, measuring the electrical current noise spectra provides a sensitive alternative method for detecting the damping and dephasing of quantum vibrational modes.

Electric measurements↗
DOE OSTI2026

Non-resonant Raman optical activity from phase-space electronic structure theory

In order to model experimental non-resonant Raman optical activity, chemists must compute a host of second-order response tensors (e.g., the electric-dipole–magnetic-dipole polarizability) and their nuclear derivatives along a set of vibrational modes. While these response functions are almost always computed within a Born–Oppenheimer (BO) framework, here we provide a natural interpretation of the electric-dipole–magnetic-dipole polarizability within phase space electronic structure theory, a beyond-BO model whereby the electronic structure depends on nuclear momentum (P) in addition to nuclear position (R). By coupling to nuclear momentum, phase space electronic structure theory is able to capture the asymmetric response of the electronic properties to an external field, in so far as for a vibrating (non-stationary) molecule, $\frac{∂μ}{∂B}$≠$\frac{∂m}{∂F}$, where μ and m are the electrical linear and magnetic dipoles, and F and B are electric and magnetic fields. As an example, for a prototypical methyloxirane molecule, we show that phase space electronic structure theory is able to deliver a reasonably good match with experimental results in a manner that is formally invariant to gauge origin G 0 —provided that one uses a complete basis or, alternatively, gauge invariant atomic orbitals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

N* Physics with CLAS12 at Jefferson Lab

Nucleons are the most fundamental bound three-body systems in Nature. With the CLAS12 spectrometer at Jefferson Lab, the spectrum and the structure of nucleon resonances is explored. This includes studies of exclusive piN, pi+pi-p, KLambda, and KSigma electroproduction reactions and the evolution of the electrocouplings of resonances with photon virtuality Q^2. Such type of studies with CLAS have revealed a complex interplay between a core of dressed quarks and an external meson-baryon cloud inside of the excited nucleon states. With CLAS12, also measurements of N -> N* transitions in the DIS region have been performed, addressing the three-dimensional structure of nucleon resonances through their transition GPDs (generalized parton distributions). In the future, the increase of the CEBAF energy and the upgrade of the CLAS12 spectrometer to study exclusive electroproduction channels at higher luminosities and photon virtualities will offer a unique opportunity to study the nucleon excitation mechanisms.

Achenbach, Patrick↗
NASA NTRS2004

Self-Organized Criticality, Multifractals, and Intermittent Turbulence in Earth's Magnetotail

We have achieved all the goals stated in our grant proposal in collaboration with Dr. C.C. Wu of the University of California at Los Angeles. Specifically, these include: The understanding of the complexity induced nonlinear spatiotemporal structures and the coexisting propagating modes. The development of plasma resonances and coherent structures in space plasmas. The study of fluctuation-induced nonlinear instabilities and their role in the reconfiguration of magnetic topologies in the magnetotail. The development of "anisotropic three-dimensional complexity" in the plasma sheet due to localized merging and interactions of the magnetic coherent structures and associated topological phase transitions. The understanding of the intermittent turbulence and energization process of the observed Bursty Bulk Flows (BBF's) in the Earth s magnetotail. The acceleration of ions due to the intermittent turbulence of propagating arid nonpropagating fluctuations In the following, we include lists of our published papers, invited talks, and professional activities. A detailed description of our accomplished research results is given in Section IV.

Chang, Tom↗