Search NASA⌕ Search

SEARCH · Search NASA

Results for “Resonance techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

Kinetics and Thermochemistry of the Br((sup 2)P3/2) + NO2 Association Reaction

A laser flash photolysis-resonance fluorescence technique has been employed to study the kinetics of the Br((sup 2)P3/2) + NO2 association reaction as a function of temperature (259-432 K) pressure (12.5 - 700 Torr), and buffer gas identity (He, Ar, H2, N2, CO2, CF4, SF6). The reaction is found to be in the falloff regime between third and second order over the entire range of conditions investigated. At temperatures below 350 K, the association reaction is found to be irreversible on the time scale of the experiment (approximately 30 ms). At higher temperatures reversible addition is observed, allowing equilibrium constants for BrNO2 formation and dissociation to be determined. Second- and third-law analyses of the equilibrium data are in only fair agreement and lead to the following thermochemical parameters for the association reaction: Delta-H(298) = 19.6 +/- 1.7 kcal/mol, Delta-H(0) = -18.6 +/- 2.0 kcal/mol, Delta-S(298) = 29.3 +/- 4.2 cal/mol/K, Delta-H(sub f)(sub 298)(BrNO2) = 17.0 +/-1.8 kcal/mol(uncertainties are 2 sigma estimates of absolute accuracy). The value for Delta-H(0) determined in this study has been employed to calculate k(sub 0)(sup SC), the low-pressure third-order rate coefficient in the strong collision limit, by using the method of Troe; calculated values of k(sub 0)(sup SC) are inconsistent with experimental results unless Delta-H(0) is assigned a value near the lower limit derived from analysis of the high-temperature approach to equilibrium data, i.e. delta-H(0) approximately equals -16.6 kcal/mol. A potential source of systematic error in the calculation of both k(sub 0)(sup SC) and the absolute entropy of BrNO2 results from the complete lack of knowledge of the energies and degeneracies of the electronic states of BrNO3. The procedure developed by Troe and co-workers has been employed to extrapolate experimental falloff curves to the low- and high-pressure limits. Derived values for k(sub 0)(M,298K) in units of 10(exp -31) cm(exp 6)/sq molecule/s range from 2.75 for M = He to 6.54 for M = CO2; 2 sigma uncertainties are estimated to be +/- 20%. Values for k(sub 0)(N2,T) in units of 10(exp -31) cm(exp 6)/sq molecule/s are 5.73 at 259 K, 4.61 at 298 K, and 3.21 at 346 K; the observed temperature dependence for k(sub 0)(N2,T) is consistent with the theoretical temperature dependence for Beta(sub c)k(sub 0)(sup SC). Values for k(sub infinity)(T) in units of 10(exp -11) cu cm/molecule/s are 2.86 at 259 K, 3.22 at 298 K, and 3.73 at 346 K; 2 sigma uncertainties are estimated to be a factor of 2. Approximate falloff parameters in a convenient format for atmospheric modeling are also derived.

Kreutter, K. D.↗
NASA NTRS1997

Kinetics of the Reactions of Cl((sup 2)P(sub J)) and Br((sup 2)P(sub 3/2)) with O3

A laser flash photolysis-resonance fluorescence technique has been employed to study the kinetics of the important stratospheric reactions Cl((sup 2)P(sub J)) + O3 yields ClO + O2 and Br((sup 2)P(sub 3/2)) + O3 yields BrO + O2 as a function of temperature. The temperature dependence observed for the Cl((sup 2)P(sub J)) + O3 reaction is nonArrhenius, but can be adequately described by the following two Arrhenius expressions (units are cu cm/(molecule.s), errors are 2 sigma and represent precision only): k(sub 1)(T) = (1.19 +/- 0.21) x 10(exp -11) exp[(-33 +/- 37)/T] for T = 189-269 K and k(sub 1)(T) = (2.49 +/- 0.38) x 10(exp -11) exp[(-233 +/- 46)/T] for 269-385 K. At temperatures below 230 K, the rate coefficients determined in this study are faster than any reported previously. Incorporation of our values for k(sub 1)(T) into stratospheric models would increase calculated ClO levels and decrease calculated HCI levels; hence the calculated efficiency of ClO catalyzed ozone destruction would increase. The temperature dependence observed for the Br((sup 2)P(sub 3/2)) + O3 reaction is adequately described by the following Arrhenius expression (units are cu cm/(molecule.s), errors are 2 sigma and represent precision only): k(sub 2)(T) = (1.50 +/- 0.16) x 10(exp -11)exp[(-775 +/- 30)/T for 195-392 K. While not in quantitative agreement with Arrhenius parameters reported in most previous studies, our results almost exactly reproduce the average of all earlier studies and therefore will not affect the choice of k(sub 2)(T) for use in modeling stratospheric BrO2 chemistry.

Nicovich, J. M.↗
NASA NTRS1997

Kinetics of the Reactions of O((sup 3)P) and Cl((sup 2)P) with HBr and Br2

A laser flash photolysis-resonance fluorescence technique has been employed to study the kinetics of reactions (1)-(4) as a function of temperature. (1) O((sup 3)P) + Br2 yields BrO + Br((sup 2)P(sub 3/2)) at 255-350 K; (2) Cl((sup 2)P) + Br2 yields BrCl + Br((sup 2)P(sub 3/2)) at 298-401 K; (3) O((sup 3)P) + HBr yields OH + Br((sup 2)P(sub J)) at 250-402 K; (4) Cl((sup 2)P) + HBr yields HCl + Br((sup 2)P(sub J)) at 257-404 K. In all cases, the concentration of the excess reagent, i.e, HBr or Br2, was measured in situ in the slow flow system by UV-visible photometry. Heterogeneous dark reactions between XBr (X equals H or Br) and the photolytic precursors for Cl((sup 2)P) and O((sup 3)P) (Cl2 and O3, respectively) were avoided by injecting minimal amounts of precursor into the reaction mixture immediately upstream from the reaction zone. The following Arrhenius expressions summarize our results (errors are 2 sigma and represent precision only, units are cu cm/(molecule.s): k(sub 1) = (1.76 +/- 0.80) x 10(exp -11 exp[(40 +/- 100)/T]; k(sub 2) = (2.40 +/- 1.25) x 12(exp -10) exp[-(144 +/- 176)/T]; k(sub 3) = (5.11 +/- 2.82) x 10(exp -12) exp[-(1450 +/- 160)/T]; k(sub 4) = (2.25 +/- 0.56) x 10(exp -11) exp[-(400 +/- 80)/T]. The consistency (or lack thereof) of our results with those reported in previous kinetics and dynamics studies of reactions (1)-(4) is discussed.

Nicovich, J. M.↗
NASA NTRS2000

Kinetics of the Cl(2)P(J)) + CH4 Reaction: Effects of Secondary Chemistry Below 300 K

Absolute rate data for the Cl(2)P(J) + CH4 yields HCl + CH3 reaction have been obtained from 218 to 298 K by using the discharge-flow resonance fluorescence technique at I Torr total pressure. The result at 298 K is (10.1 +/- 0.6) x 10(exp -14) cu cm/molecule/s. The temperature dependence in Arrhenius form is (6.5 +/- 0.9 ) x 10(exp -12) exp[(-1235 +/- 34 )/T]. The errors given are one standard deviation; overall experimental error is estimated at +/- 15%. Because of the relatively large disagreement among earlier measurements at low temperatures, the results were examined for possible effects of non-Boltzmann spin distribution and vibrational excitation of CH4, secondary chemistry of CH3 radicals, and impurities in the CH4 source. There was no significant change in the observed rate constant when an efficient spin quencher, CF4, was added and estimates indicate that vibrational partitioning in CH4 should be at the ambient reactor temperature before the start of the reaction. The results were also independent of the source of Cl atoms (microwave discharge or thermal decomposition of Cl2) and whether CH4 was purified in-situ. However, the observed rate constant did depend on initial Cl atom concentrations and to a lesser extent on CH4 concentrations. Numerical simulations were used to assess the importance of secondary chemistry over a range of reactant concentrations

Wang, J. J.↗
NASA NTRS2003

Mars Oxidant and Radical Detector

The Mars Oxidant and Radical Detector is an instrument designed to characterize the reactive nature of the martian surface environment. Using Electron Paramagnetic Resonance (EPR) techniques, this instrument can detect, identify, and quantify radical species in soil samples, including those inferred to be present by the Viking experiments. This instrument is currently funded by the Mars Instrument Development Program and is compatible with the Mars Science Laboratory mission.

Yen, A. S.↗
NASA NTRS1997

Direct and Inverse Techniques of Guided-Mode Resonance Filters Designs

Guided-mode resonances arise in single or multilayer waveguides where one or more homogeneous layers are replaced by diffraction gratings (Fig. 1.) The diffractive element enables an electromagnetic wave incident on a waveguide grating to be coupled to the waveguide modes supportable by the structure in the absence of the modulation (i.e. the difference between the high and low dielectric constants of the grating) at specific values of the wavelength and incident angle. The periodic modulation of the guide makes the structure leaky, preventing sustained propagation of modes in the waveguide and coupling the waves out into the substrate and cover. As the wavelength is varied around resonance a rapid variation in the intensities of the external propagating waves occurs. By selecting a grating period small enough to eliminate the higher-order propagating waves, an increase in the zero-order intensities up to 100% can result. The pronounced frequency selectivity of guided-mode resonances in dielectric waveguide gratings can be applied to design high-efficiency reflection and transmission filters [1-3].

Tibuleac, Sorin↗
NASA NTRS2006

Deep-UV Based Acousto-Optic Tunable Filter for Spectral Sensing Applications

In this paper, recent progress made in the development of quartz and KDP crystal based acousto-optic tunable filters (AOTF) are presented. These AOTFs are developed for operation over deep-UV to near-UV wavelengths of 190 nm to 400 nm. Preliminary output performance measurements of quartz AOTF and design specifications of KDP AOTF are presented. At 355 nm, the quartz AOTF device offered approx.15% diffraction efficiency with a passband full-width-half-maximum (FWHM) of less than 0.0625 nm. Further characterization of quartz AOTF devices at deep-UV wavelengths is progressing. The hermetic packaging of KDP AOTF is nearing completion. The solid-state optical sources being used for excitation include nonlinear optics based high-energy tunable UV transmitters that operate around 320 nm and 308 nm wavelengths, and a tunable deep-UV laser operating over 193 nm to 210 nm. These AOTF devices have been developed as turn-key devices for primarily for space-based chemical and biological sensing applications using laser induced Fluorescence and resonance Raman techniques.

Prasad, Narasimha S.↗
NASA NTRS2008

Recent Results on the Accurate Measurements of the Dielectric Constant of Seawater at 1.413GHZ

Measurements of the complex. dielectric constant of seawater at 30.00 psu, 35.00 psu and 38.27 psu over the temperature range from 5 C to 3 5 at 1.413 GHz are given and compared with the Klein-Swift results. A resonant cavity technique is used. The calibration constant used in the cavity perturbation formulas is determined experimentally using methanol and ethanediol (ethylene glycol) as reference liquids. Analysis of the data shows that the measurements are accurate to better than 1.0% in almost all cases studied.

Lang, R.H.↗
NASA NTRS2010

Active Vibration Reduction of Titanium Alloy Fan Blades (FAN1) Using Piezoelectric Materials

The NASA Glenn Research Center is developing smart adaptive structures to improve fan blade damping at resonances using piezoelectric (PE) transducers. In this paper, a digital resonant control technique emulating passive shunt circuits is used to demonstrate vibration reduction of FAN1 Ti real fan blade at the several target modes. Single-mode control and multi-mode control using one piezoelectric material are demonstrated. Also a conceptual study of how to implement this digital control system into the rotating fan blade is discussed.

Choi, Benjamin↗
NASA NTRS2018

Seawater Dielectric Measurements at L-Band with Latest Improvements

Recently, the dielectric constant of seawater at L-band was determined by employing a resonant cavity technique. A dielectric model function has been developed based on the measurement data and the model function has been used for retrieving the ocean salinity. The results indicate that additional accuracy is still needed to resolve the bias correlated with sea surface temperature. This paper reports the improvements that have been made recently for the development of a more accurate seawater dielectric model function. The additional measurements for the open ocean will be addressed in the paper.

L-band↗
NASA NTRS2020

Efficient production of a high-performance dispersion strengthened, multi-principal element alloy

Additive manufacturing currently facilitates new avenues for materials discovery that have not been fully explored. In this study we reveal how additive manufacturing can be leveraged to produce dispersion strengthened (DS), multi-principal element alloys (MPEA) without the use of traditional mechanical alloying or chemical reactions. This new processing technique employed resonant acoustic mixing to coat an equiatomic NiCoCr powder with nano-scale yttrium oxides. Then, through laser powder bed fusion (L-PBF), the coated powder was successfully consolidated into 99.9% dense parts. Microstructural analysis confirmed the successful incorporation and dispersion of nano-scale oxides throughout the build volume. Furthermore, high temperature mechanical testing of the DS alloys showed significant improvements in strength and ductility over the baseline NiCoCr. As a result, this recently discovered processing route opens a new alloy design and production path that is synergistic between additive manufacturing and dispersion strengthening, possibly enabling a new generation of high-performance alloys.

T.M. Smith↗
DOE OSTI2023

Observing Charge Separation Distance in Organic Donor-Acceptors with Photoinduced Absorption Detected Magnetic Resonance Spectroscopy

The debatable role of charge transfer states in photoinduced charge separation to useful free carriers has been a long-standing controversy in the field of organic solar cells. In this work, varying charge-pair distances are measured in sensitized donor-acceptor thin films using a photoinduced absorption-detected magnetic resonance (PADMR) technique where nearest-neighbor charge transfer states are identified by their strong magnetic dipole-coupling relative to more distant charges. Correlation with the direct measurement of free carriers using time-resolved microwave conductivity has corroborated a distributed-range electron transfer model in which charges generated at longer distances become free carriers, while shorter transfer distances give only bound charge transfer states that cannot separate to generate photocurrent.

charge transfer↗
DOE OSTI2021

Neutron-Resonance Transmission Analysis with a Compact Deuterium-Tritium Neutron Generator

Neutron Resonance Transmission Analysis (NRTA) is a spectroscopic technique which uses the resonant absorption of neutrons in the epithermal range to infer the isotopic composition of an object. This spectroscopic technique has relevance in many traditional fields of science and nuclear security. NRTA in the past made use of large, expensive accelerator facilities to achieve precise neutron beams, significantly limiting its applicability. Here, we describe a series of NRTA experiments where we use a compact, low-cost deuterium-tritium (DT) neutron generator to produce short neutron beams (2.6 m) along with a 6 Li-glass neutron detector. The time-of-flight spectral data from five elements – silver, cadmium, tungsten, indium, and 238 U – clearly show the corresponding absorption lines in the 1-30 eV range. The experiments show the applicability of NRTA in this simplified configuration, and prove the feasibility of this compact and low-cost approach. This could significantly broaden the applicability of NRTA, and make it practical and applicable in many fields, such as material science, nuclear engineering, and arms control.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1994

Sensitive Technique For Detecting Alignment Of Seed Laser

Frequency response near resonance measured. Improved technique for detection and quantification of alignment of injection-seeding laser with associated power-oscillator laser proposed. Particularly useful in indicating alignment at spectral purity greater than 98 percent because it becomes more sensitive as perfect alignment approached. In addition, implemented relatively easily, without turning on power-oscillator laser.

Barnes, Norman P.↗
DOE OSTI2023

Polarized Resonant X-ray Scattering to Measure Molecular Orientation and Conformation in Organic Nanostructures

The ordering of organic (carbon-based) molecules into nanostructures drives useful materials properties for applications such as organic light emitting diodes, flexible batteries, and polymer nanocarriers. However, there is a current lack of techniques to measure this ordering. X-ray scattering techniques involving molecular resonances have shown promise in identifying molecular types, locations, and orientation. However, resonant soft X-ray scattering (RSoXS) techniques have not been developed even lacking basic optical models. The objectives achieved by this research were the development of methods, models, and analysis techniques that harness these resonant phenomena in X-ray scattering measurements to quantitatively probe ordering of organic molecules within devices and nanostructures. This award resulted in 11 peer reviewed publications with two others soon to be submitted. New physical models for X-ray scattering that accurately describe these complex molecular resonances enable measurements of how molecules assemble, orient and conform at the nanometer scale. These new techniques were applied to both organic electronic devices and aqueous nanoparticles being developed for hydrocarbon sequestration. This new measurement capability will enable characterization of structure-property relationships that lead to disruptive technologies of printable, stretchable, and biocompatible devices based on organic materials.

14 SOLAR ENERGY↗
DOE OSTI2025

Multimode turbulent flow measurements using magnetic resonance imaging- and laser-based techniques and computational fluid dynamics simulations

We studied the flow field characteristics of a turbulent flow over a regularized cube array with a perpendicular injection flow through the floor between the second and third cubical elements, representing the complex flow interactions of a 3D jet and the wake flows behind cubical obstacles. Four different experimental measurements were performed: two magnetic resonance imaging-based measurements for three-dimensional three-component velocity (MRV) and concentration (MRC) and two laser-based techniques, particle image velocimetry (PIV) and planar laser-induced fluorescence (PLIF), for two-dimensional two-component velocity and concentration measurement, respectively. The mainstream Reynolds number is Re = 15 000⁠, based on the primary inlet velocity U m and channel height D H ⁠, whereas the injector Reynolds number is Re j = 3400⁠, based on the injector velocity U j and the injector's exit width D j ⁠. Numerical simulations were performed for the studied flow configuration of turbulent flow over a regularized cube array using Reynolds-averaged Navier–Stokes (RANS) and large-eddy simulation (LES) approaches. Results obtained from experimental measurements—including MRV, MRC, PIV, and PLIF—as well as RANS and LES simulations are discussed and compared along several horizontal and vertical planes of the studied configuration. In addition, 3D turbulent flow structures, such as leading-edge vortex, horseshoe vortex, and jet shear-layer vortex, and the isosurfaces of scalar concentration successfully revealed by MRV and MRC techniques were found to be in very good agreement with those 3D features extracted from RANS and LES simulations. In conclusion, the high-resolution experimental and numerical database obtained from this study could be useful for validation and verification of numerical codes.

Computational fluid dynamics↗
DOE OSTI2024

Search for new physics in high-mass diphoton events from proton-proton collisions at $ \sqrt{\textrm{s}} $ = 13 TeV

Results are presented from a search for new physics in high-mass diphoton events from proton-proton collisions at $ \sqrt{s} $ = 13 TeV. The data set was collected in 2016–2018 with the CMS detector at the LHC and corresponds to an integrated luminosity of 138 fb$^{−1}$. Events with a diphoton invariant mass greater than 500 GeV are considered. Two different techniques are used to predict the standard model backgrounds: parametric fits to the smoothly-falling background and a first-principles calculation of the standard model diphoton spectrum at next-to-next-to-leading order in perturbative quantum chromodynamics calculations. The first technique is sensitive to resonant excesses while the second technique can identify broad differences in the invariant mass shape. The data are used to constrain the production of heavy Higgs bosons, Randall-Sundrum gravitons, the large extra dimensions model of Arkani-Hamed, Dimopoulos, and Dvali (ADD), and the continuum clockwork mechanism. No statistically significant excess is observed. The present results are the strongest limits to date on ADD extra dimensions and RS gravitons with a coupling parameter greater than 0.1.[graphic not available: see fulltext]

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1978

Coal thickness gauge using RRAS techniques, part 1

A noncontacting sensor having a measurement range of 0 to 6 in or more, and with an accuracy of 0.5 in or better is needed to control the machinery used in modern coal mining so that the thickness of the coal layer remaining over the rock is maintained within selected bounds. The feasibility of using the radiofrequency resonance absorption (RRAS) techniques of electron magnetic resonance (EMR) and nuclear magnetic resonance (NMR) as the basis of a coal thickness gauge is discussed. The EMR technique was found, by analysis and experiments, to be well suited for this application.

Rollwitz, W. L.↗