SEARCH · Search NASA

Results for “SEQUENTIAL CONTROL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

All sources NASA NTRS DOE OSTI

NASA NTRS2002

Timeliner: Automating Procedures on the ISS

Timeliner has been developed as a tool to automate procedural tasks. These tasks may be sequential tasks that would typically be performed by a human operator, or precisely ordered sequencing tasks that allow autonomous execution of a control process. The Timeliner system includes elements for compiling and executing sequences that are defined in the Timeliner language. The Timeliner language was specifically designed to allow easy definition of scripts that provide sequencing and control of complex systems. The execution environment provides real-time monitoring and control based on the commands and conditions defined in the Timeliner language. The Timeliner sequence control may be preprogrammed, compiled from Timeliner "scripts," or it may consist of real-time, interactive inputs from system operators. In general, the Timeliner system lowers the workload for mission or process control operations. In a mission environment, scripts can be used to automate spacecraft operations including autonomous or interactive vehicle control, performance of preflight and post-flight subsystem checkouts, or handling of failure detection and recovery. Timeliner may also be used for mission payload operations, such as stepping through pre-defined procedures of a scientific experiment.

Brown, Robert↗

NASA NTRS1980

Perturbation-magnitude control for difference-quotient estimation of derivatives

A process for adjusting perturbation magnitude for accurate difference-quotient estimation of derivatives is described. The process is intended to be carried out sequentially, alternating with iterations of a parameter-optimization algorithm. A more complex and computationally-expensive scheme for occasional auxiliary use is also described.

Kelley, H. J.↗

NASA NTRS1982

Population control of self-replicating systems

The literature concerning fibonacci sequence and the mathematics of self replication are reviewed. One option allows each primary to generate n-replicas, one in each sequential time frame after its own generation with no restrictions on the number of ancestors per replica. The state vector of the replicas in an efficient manner is determined. Option-B has a fixed number of replicas per primary and no restrictions on the number of ancestors for a replica. Any element fij represents the number of elements of type-j in time frame k+1 generated from type-i in time frame k. Option-D is a diagonal matrix whose eigenvalues are precisely those of f.

Mccord, R. L.↗

NASA NTRS1975

A two-level trajectory decomposition algorithm featuring optimal intermediate target selection

A decomposition algorithm is presented that optimizes complex missions by partitioning the trajectory into natural segments such as ascent or entry. Each segment defines a full-rank targeting subproblem. These are solved sequentially using the Newton-Raphson algorithm. The master problem, representing the complete mission, is to determine subproblem targets and master-problem controls that optimize the mission objective subject to intersegment constraints. The gradient projection algorithm solves this problem using derivatives obtained analytically from finite-difference subproblem sensitivities. Thus, the mission is optimized by coordinating the solution of tractible subproblems. Computational results for a synchronous equatorial mission are included.

Petersen, F. M.↗

NASA NTRS1977

A two-level trajectory decomposition algorithm featuring optimal intermediate target selection

A decomposition algorithm is presented which optimizes complex missions by partitioning the trajectory into natural segments such as ascent or entry. Each segment defines a full-rank targeting subproblem. These are solved sequentially using the Newton-Raphson algorithm. The master problem, representing the complete mission, is to determine subproblem targets and master-problem controls that optimize the mission objective subject to intersegment constraints. The gradient projection algorithm solves this problem using derivatives obtained analytically from finite-difference subproblem sensitivities. Thus, the mission is optimized by coordinating the solution of tractible subproblems. Computational results for a synchronous equatorial mission are included.

Petersen, F. M.↗

NASA NTRS1979

Helicopter /RSRA/ in-flight escape system - Component qualification

The paper describes the design, development, and qualification approach for the RSRA (Rotor Systems Research Aircraft) system explosive and pyrotechnic components. The approach was based on previous experience and included: (1) the application of good design practice and quality control, (2) a thorough examination of component interfaces through demonstration testing of functional margins, (3) the carrying out of thorough real-world sequential environmental testing, and (4) the operation of environmentally exposed units in subsystem-level tests at temperature, force, and energy limits. Owing largely to this approach, the RSRA became the first helicopter system to contain a fully qualified and operational in-flight escape system.

Bement, L. J.↗

NASA NTRS2006

Constraining Numerical Geodynamo Modeling with Surface Observations

Numerical dynamo solutions have traditionally been generated entirely by a set of self-consistent differential equations that govern the spatial-temporal variation of the magnetic field, velocity field and other fields related to dynamo processes. In particular, those solutions are obtained with parameters very different from those appropriate for the Earth s core. Geophysical application of the numerical results therefore depends on correct understanding of the differences (errors) between the model outputs and the true states (truth) in the outer core. Part of the truth can be observed at the surface in the form of poloidal magnetic field. To understand these differences, or errors, we generate new initial model state (analysis) by assimilating sequentially the model outputs with the surface geomagnetic observations using an optimal interpolation scheme. The time evolution of the core state is then controlled by our MoSST core dynamics model. The final outputs (forecasts) are then compared with the surface observations as a means to test the success of the assimilation. We use the surface geomagnetic data back to year 1900 for our studies, with 5-year forecast and 20-year analysis periods. We intend to use the result; to understand time variation of the errors with the assimilation sequences, and the impact of the assimilation on other unobservable quantities, such as the toroidal field and the fluid velocity in the core.

Kuang, Weijia↗

NASA NTRS2001

Conditions for Interference Versus Facilitation During Sequential Sensorimotor Adaptation

We investigated how sensorimotor adaptation acquired during one experimental session influenced the adaptation in a subsequent session. The subjects' task was to track a visual target using a joystick-controlled cursor, while the relationship between joystick and cursor position was manipulated to introduce a sensorimotor discordance. Each subject participated in two sessions, separated by a pause of 2 min to 1 month duration. We found that adaptation was achieved within minutes, and persisted in the memory for at least a month, with only a small decay (experiment A). When the discordances administered in the two sessions were in mutual conflict, we found evidence for task interference (experiment B). However, when the discordances were independent, we found facilitation rather than interference (experiment C); the latter finding could not be explained by the use of an "easier" discordance in the second session (experiment D). We conclude that interference is due to an incompatibility between task requirements, and not to a competition of tasks for short-term memory. We further conclude that the ability to adapt to a sensorimotor discordance.

Bock, Otmar↗

NASA NTRS1991

Lessons learned for composite structures

Lessons learned for composite structures are presented in three technology areas: materials, manufacturing, and design. In addition, future challenges for composite structures are presented. Composite materials have long gestation periods from the developmental stage to fully matured production status. Many examples exist of unsuccessful attempts to accelerate this gestation period. Experience has shown that technology transition of a new material system to fully matured production status is time consuming, involves risk, is expensive and should not be undertaken lightly. The future challenges for composite materials require an intensification of the science based approach to material development, extension of the vendor/customer interaction process to include all engineering disciplines of the end user, reduced material costs because they are a significant factor in overall part cost, and improved batch-to-batch pre-preg physical property control. Historical manufacturing lessons learned are presented using current in-service production structure as examples. Most producibility problems for these structures can be traced to their sequential engineering design. This caused an excessive emphasis on design-to-weight and schedule at the expense of design-to-cost. This resulted in expensive performance originated designs, which required costly tooling and led to non-producible parts. Historically these problems have been allowed to persist throughout the production run. The current/future approach for the production of affordable composite structures mandates concurrent engineering design where equal emphasis is placed on product and process design. Design for simplified assembly is also emphasized, since assembly costs account for a major portion of total airframe costs. The future challenge for composite manufacturing is, therefore, to utilize concurrent engineering in conjunction with automated manufacturing techniques to build affordable composite structures. Composite design experience has shown that significant weight savings have been achieved, outstanding fatigue and corrosion resistance have been demonstrated, and in-service performance has been very successful. Currently no structural design show stoppers exist for composite structures. A major lesson learned is that the full scale static test is the key test for composites, since it is the primary structural 'hot spot' indicator. The major durability issue is supportability of thin skinned structure. Impact damage has been identified as the most significant issue for the damage tolerance control of composite structures. However, delaminations induced during assembly operations have demonstrated a significant nuisance value. The future challenges for composite structures are threefold. Firstly, composite airframe weight fraction should increase to 60 percent. At the same time, the cost of composite structures must be reduced by 50 percent to attain the goal of affordability. To support these challenges it is essential to develop lower cost materials and processes.

Whitehead, R. S.↗

NASA NTRS1975

Software for Digital Acquisition System and Application to Environmental Monitoring

Criteria for selection of a minicomputer for use as a core resident acquisition system were developed for the ODU Mobile Air Pollution Laboratory. A comprehensive data acquisition program named MONARCH was instituted in a DEC-8/E-8K 12-bit computer. Up to 32 analog voltage inputs are scanned sequentially, converted to BCD, and then to actual numbers. As many as 16 external devices (valves or any other two-state device) are controlled independently. MONARCH is written as a foreground-background program, controlled by an external clock which interrupts once per minute. Transducer voltages are averaged over user specified time intervals and, upon completion of any desired time sequence, outputted are: day, hour, minute, second; state of external valves; average value of each analogue voltage (E Format); as well as standard deviations of these values. Output is compatible with any serially addressed media.

Copeland, G. E.↗

NASA NTRS2002

Database Reports Over the Internet

Most of the summer was spent developing software that would permit existing test report forms to be printed over the web on a printer that is supported by Adobe Acrobat Reader. The data is stored in a DBMS (Data Base Management System). The client asks for the information from the database using an HTML (Hyper Text Markup Language) form in a web browser. JavaScript is used with the forms to assist the user and verify the integrity of the entered data. Queries to a database are made in SQL (Sequential Query Language), a widely supported standard for making queries to databases. Java servlets, programs written in the Java programming language running under the control of network server software, interrogate the database and complete a PDF form template kept in a file. The completed report is sent to the browser requesting the report. Some errors are sent to the browser in an HTML web page, others are reported to the server. Access to the databases was restricted since the data are being transported to new DBMS software that will run on new hardware. However, the SQL queries were made to Microsoft Access, a DBMS that is available on most PCs (Personal Computers). Access does support the SQL commands that were used, and a database was created with Access that contained typical data for the report forms.

Dean Lance Smith↗

NASA NTRS1982

Automatic weld torch guidance control system

A highly reliable, fully digital, closed circuit television optical, type automatic weld seam tracking control system was developed. This automatic tracking equipment is used to reduce weld tooling costs and increase overall automatic welding reliability. The system utilizes a charge injection device digital camera which as 60,512 inidividual pixels as the light sensing elements. Through conventional scanning means, each pixel in the focal plane is sequentially scanned, the light level signal digitized, and an 8-bit word transmitted to scratch pad memory. From memory, the microprocessor performs an analysis of the digital signal and computes the tracking error. Lastly, the corrective signal is transmitted to a cross seam actuator digital drive motor controller to complete the closed loop, feedback, tracking system. This weld seam tracking control system is capable of a tracking accuracy of + or - 0.2 mm, or better. As configured, the system is applicable to square butt, V-groove, and lap joint weldments.

Smaith, H. E.↗

NASA NTRS1988

Programmable Pulser

User controls number of clock pulses to prevent burnout. New digital programmable pulser circuit in three formats; freely running, counted, and single pulse. Operates at frequencies up to 5 MHz, with no special consideration given to layout of components or to terminations. Pulser based on sequential circuit with four states and binary counter with appropriate decoding logic. Number of programmable pulses increased beyond 127 by addition of another counter and decoding logic. For very large pulse counts and/or very high frequencies, use synchronous counters to avoid errors caused by propagation delays. Invaluable tool for initial verification or diagnosis of digital or digitally controlled circuity.

Baumann, Eric↗

NASA NTRS2008

RFID in Space: Exploring the Feasibility and Performance of Gen 2 Tags as a Means of Tracking Equipment, Supplies, and Consumable Products in Cargo Transport Bags onboard a Space Vehicle or Habitat

Current inventory management techniques for consumables and supplies aboard space vehicles are burdensome and time consuming. Inventory of food, clothing, and supplies are taken periodically by manually scanning the barcodes on each item. The inaccuracy of reading barcodes and the excessive amount of time it takes for the astronauts to perform this function would be better spent doing scientific experiments. Therefore, there is a need for an alternative method of inventory control by NASA astronauts. Radio Frequency Identification (RFID) is an automatic data capture technology that has potential to create a more effective and user-friendly inventory management system (IMS). In this paper we introduce a Design for Six Sigma Research (DFSS-R) methodology that allows for reliability testing of RFID systems. The research methodology uses a modified sequential design of experiments process to test and evaluate the quality of commercially available RFID technology. The results from the experimentation are compared to the requirements provided by NASA to evaluate the feasibility of using passive Generation 2 RFID technology to improve inventory control aboard crew exploration vehicles.

Jones, Erick C.↗

NASA NTRS1983

Galileo probe relay receiver - Acquisition and tracking

The probe-to-orbiter data link for the Jovian mission uses a Manchester encoded BPSK waveform which is demodulated by the Galileo probe relay receiver. Signal acquisition and tracking consists of a sequential probability ratio signal search, frequency acquisition with a least-squares estimator, wide-band phase lock acquisition, and a self-regulating mode control. A discrete Fourier transform serves as the basic mechanism to generate the algorithms that provide this orderly transition to phase tracking. Acquisition and tracking is addressed in this paper with emphasis on key algorithms, rationale, and theoretical/measured performance.

Von Der Embse, U. A.↗

NASA NTRS1987

A controlled experiment on the impact of software structure on maintainability

The impact of software structure on maintainability aspects including comprehensibility, locality, modifiability, and reusability in a distributed system environment is studied in a controlled maintenance experiment involving six medium-size distributed software systems implemented in LADY (language for distributed systems) and six in an extended version of sequential PASCAL. For all maintenance aspects except reusability, the results were quantitatively given in terms of complexity metrics which could be automated. The results showed LADY to be better suited to the development of maintainable software than the extension of sequential PASCAL. The strong typing combined with high parametrization of units is suggested to improve the reusability of units in LADY.

Rombach, Dieter H.↗

NASA NTRS1997

Approximations for Quantitative Feedback Theory Designs

The computational requirements for obtaining the results summarized in the preceding section were very modest and were easily accomplished using computer-aided control system design software. Of special significance is the ability of the PDT to indicate a loop closure sequence for MIMO QFT designs that employ sequential loop closure. Although discussed as part of a 2 x 2 design, the PDT is obviously applicable to designs with a greater number of inputs and system responses.

Henderson, D. K.↗

NASA NTRS2010

Context based configuration management system

A computer-based system for configuring and displaying information on changes in, and present status of, a collection of events associated with a project. Classes of icons for decision events, configurations and feedback mechanisms, and time lines (sequential and/or simultaneous) for related events are displayed. Metadata for each icon in each class is displayed by choosing and activating the corresponding icon. Access control (viewing, reading, writing, editing, deleting, etc.) is optionally imposed for metadata and other displayed information.

Gawdiak, Yuri O.↗