Search NASA⌕ Search

SEARCH · Search NASA

Results for “SHEAR PROPERTIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

The utilization of satellite data and dynamics in understanding and predicting global weather phenomena

A two layer spectral quasi-geostrophic model is used to simulate the effects of topography on the equilibria, the stability, and the long term evaluation of incipient unstable waves. The flow is forced by latitudinally dependent radiational heating. The nature of the form drag instability of high index equilibria is investigated. The proximity of the equilibrium shear to a resonant value is essential for the instability, provided the equilibrium occurs at a slightly stronger shear than resonance. The properties of the steady Hadley and Rossby required for a thermally forced rotating fluid on a sphere are further explained. An objective parameterization technique is developed for general nonlinear hydrodynamical systems. The typical structure is one in which the rates of change of the dependent variables depend on homogeneous quadratic and linear forms, as well as on inhomogeneous forcing terms. Also documented is a steady, axisymmetric model of the general circulation developed as a basis for climate stability studies. The model includes the effects of heating, rotation, and internal friction, but neglects topography. Included is further research on cloud street phenomena. Orientation angles and horizontal wavelengths of boundary layer rolls and cloud streets are determined from an analysis of a truncated spectral model of three dimensional shallow moist Boussinesq convection in a shearing environment is further explained. Relatively broadly spaced roll clouds have orientations for which the Fourier component of the roll perpendicular shear is nearly zero, but the second corresponds to narrowly spaced rolls having orientations for which the Fourier coefficients of both the perpendicular and the parallel components of the shear are nearly equal.

Shirer, H. N.↗
DOE OSTI2023

Effect of isopropanol cosolvent on the rheology and spinnability of aqueous polyacrylic acid solutions

Abstract We investigate the effect of alcohol fraction (isopropanol, IPA) in a binary water‐alcohol solvent mixture on the shear and extensional rheological properties, as well as the role of viscoelasticity on fiber formation of poly(acrylic acid) (PAA) in electrospinning. Comparison of the scaling of both specific viscosities η sp and extensional relaxation times λ E of PAA in water–IPA mixtures, showed stronger scaling compared to salt‐free aqueous polyelectrolyte solutions, except for the η sp in the unentangled regime displaying a polyelectrolyte‐like scaling η sp ~ c 0.5 for all IPA%. Such deviation suggested IPA induces association/aggregation of PAA. However, the trends between η sp and λ E magnitudes as a function of IPA% differ for concentrations compared in the entangled regime. The η sp as well as their elastic moduli exhibit a maximum, whereas λ E increases monotonically with IPA%, suggesting a complex interplay of various interactions are dictating their structure in water‐IPA mixtures, affecting their shear and extensional response differently. Electrospinning experiments showed increasing IPA% reduces the onset of both beaded and uniform fibers. Analysis using dimensionless numbers indicated the enhancement of their elasticity by IPA, and the consequent stabilizing effect on their jets/filaments against break‐up during electrospinning, plays a role in the improvement of their fiber formation.

36 MATERIALS SCIENCE↗
NASA NTRS1973

Unique characterization of lunar samples by physical properties

The measurement of compressional velocity, shear velocity, static compressibility, and thermal expansion of (1) a suite of shocked rocks fron the Ries impact in Germany, (2) a suite of samples cracked by thermal cycling to high temperatures, (3) many terrestrial igneous rocks, and (4) lunar basalts, gabbroic anorthosites, and breccias, indicate that shock metamorphism is the primary cause for values of physical properties of lunar rocks being diffferent from their intrinsic values. Large scale thermal metamorphism, thermal cycling between temperatures of lunar day and night, large thermal gradients, or thermal fatigue could possibly cause minor cracking in the top few centimeters of the lunar regolith, but are probably not important mechanism for extensively changing values of physical properties of lunar rocks.-

Todd, T.↗
NASA NTRS1984

Impact properties of rubber-modified epoxy resin-graphite-fiber composites

To improve the impact resistance of graphite-fiber composites, a commercial and an experimental epoxy resin were modified with liquid reactive rubber and a brominated epoxy resin. The commercial epoxy was a tetrafunctional resin, and the experimental epoxy was a trifunctional resin. The reactive rubber was a carboxyl-terminated butadiene-acrylonitrile copolymer. The rubber content was varied from 0 to 25 percent (wt). The brominated epoxy resin was used at Br levels of 4, 19, and 35 percent of the resin. Composites were prepared with woven graphite cloth reinforcement. The composites were evaluated by using flexural strength in the dry state and an elevated temperature after saturation with water. The impact properties were determined by measuring shear strength after falling-ball impact and instrumented impact. The rubber-modified, trifunctional resin exhibited better properties, when tested in hot-wet conditions in a heated oven at 366 K (after boiling the material for 2 h in demineralized water), than the tetrafunctional resin. Improved impact resistance was observed with the addition of the reactive rubber to the epoxy resin. Further improvement was observed with the addition of the brominated epoxy resin.

Gilwee, W. J.↗
NASA NTRS1977

Use of the short-beam shear test for quality control of graphite-polyimide laminates

The properties of laminated composite materials are strongly affected by many fabrication variables including temperature, time, and molding pressure. It is therefore necessary to have reliable quality control tests to check the properties of manufactured materials. The short-beam shear test is used widely by both manufacturers and researchers as a quality control test in the production of materials and development of new material systems. There are, however, several limitations to the standard test method. This paper presents the results of short-beam shear tests on graphite-polyimide laminates and reports on stiffness-strength relationships and nondestructive evaluation methods which aid in the interpretation of the test data.

Stinchcomb, W. W.↗
NASA NTRS1977

Sources of low-level wind shear around airports

Some potential sources of low-level wind shear in and around airports and their likely effects are probed and analyzed. Wind shear over flat terrain with near-homogeneous surface properties (roughness, specific heat), the turning layer, shear flows over inhomogeneous terrain (airport + urban areas), thunderstorms, turbulent flowfields over bluff bodies (individual buildings), and recirculating wake flow downstream of three-dimensional block bodies are among the topics covered. Overshoot or undershoot of runways, and induced moments (pitch, roll, yaw) in takeoff and landing, and other potential hazards traceable to wind shear patterns at low heights are discussed, with emphasis on mean flow or steady-state wind shear (time-averaged, say 2-min averaged, wind fields). Wind tunnel studies and V/STOL operations are included in the study.

Fichtl, G. H.↗
DOE OSTI2022

Insight into ideal shear strength of Ni-based dilute alloys using first-principles calculations and correlational analysis

Here the present work examines the effect of alloying elements (denoted X) on the ideal shear strength for 26 dilute Ni-based alloys, Ni11X, as determined by first-principles calculations of pure alias shear deformations. The variations in ideal shear strength are quantitatively explored with correlational analysis techniques, showing the importance of atomic properties such as size and electronegativity. The shear moduli of the alloys are affirmed to show a strong linear relationship with their ideal shear strengths, while the shear moduli of the individual alloying elements were not indicative of alloy shear strength. Through combination with available ideal shear strength data on Mg alloys, a potential application of the Ni alloy data is demonstrated in the search for a set of atomic features suitable for machine learning applications to mechanical properties. As another illustration, the calculated Ni ideal shear strengths play a key role in a predictive multiscale framework for deformation behavior of single crystal alloys at large strains, as shown by simulated stress–strain curves.

36 MATERIALS SCIENCE↗
NASA NTRS1989

Mechanical properties of lunar regolith and lunar soil simulant

Through the Surveyor 3 and 7, and Apollo 11-17 missions a knowledge of the mechanical properties of Lunar regolith were gained. These properties, including material cohesion, friction, in-situ density, grain-size distribution and shape, and porosity, were determined by indirect means of trenching, penetration, and vane shear testing. Several of these properties were shown to be significantly different from those of terrestrial soils, such as an interlocking cohesion and tensile strength formed in the absence of moisture and particle cementation. To characterize the strength and deformation properties of Lunar regolith experiments have been conducted on a lunar soil simulant at various initial densities, fabric arrangements, and composition. These experiments included conventional triaxial compression and extension, direct tension, and combined tension-shear. Experiments have been conducted at low levels of effective confining stress. External conditions such as membrane induced confining stresses, end platten friction and material self weight have been shown to have a dramatic effect on the strength properties at low levels of confining stress. The solution has been to treat these external conditions and the specimen as a full-fledged boundary value problem rather than the idealized elemental cube of mechanics. Centrifuge modeling allows for the study of Lunar soil-structure interaction problems. In recent years centrifuge modeling has become an important tool for modeling processes that are dominated by gravity and for verifying analysis procedures and studying deformation and failure modes. Centrifuge modeling is well established for terrestrial enginering and applies equally as well to Lunar engineering. A brief review of the experiments is presented in graphic and outline form.

Steven W Perkins↗
DOE OSTI2024

Applications of emulation and Bayesian methods in heavy-ion physics

Abstract Heavy-ion collisions provide a window into the properties of many-body systems of deconfined quarks and gluons. Understanding the collective properties of quarks and gluons is possible by comparing models of heavy-ion collisions to measurements of the distribution of particles produced at the end of the collisions. These model-to-data comparisons are extremely challenging, however, because of the complexity of the models, the large amount of experimental data, and their uncertainties. Bayesian inference provides a rigorous statistical framework to constrain the properties of nuclear matter by systematically comparing models and measurements. This review covers model emulation and Bayesian methods as applied to model-to-data comparisons in heavy-ion collisions. Replacing the model outputs (observables) with Gaussian process emulators is key to the Bayesian approach currently used in the field, and both current uses of emulators and related recent developments are reviewed. The general principles of Bayesian inference are then discussed along with other Bayesian methods, followed by a systematic comparison of seven recent Bayesian analyses that studied quark-gluon plasma properties, such as the shear and bulk viscosities. The latter comparison is used to illustrate sources of differences in analyses, and what it can teach us for future studies.

Paquet, Jean-François (ORCID:0000000187368171)↗
NASA NTRS1973

A provisional analysis of two-dimensional turbulent mixing with variable density

A predictive method for the titled flows based on the Prandtl energy method was developed and assessed by comparing predicted results with experimental results. For constant-density flows, both gross properties such as spreading rate and maximum turbulent kinetic energy and detailed properties such as mean shear stress distributions are shown to be well predicted. For variable-density flows, considerable attention is devoted to the inclusion in the analysis of the added effect of pressure fluctuations and of the variation in the several extant empirical parameters on the turbulent kinetic energy. It is found that a variation with Mach number of the characteristic Reynolds number for turbulent transport is needed to account for the observed decrease in spreading rate. The predictions which result from these considerations are compared with the limited experimental data presently available for the two crucial cases: compressible adiabatic mixing and low-speed isothermal mixing of two dissimilar gases.

Libby, P. A.↗
NASA NTRS1987

The acousto-ultrasonic approach

The nature and underlying rationale of the acousto-ultrasonic approach is reviewed, needed advanced signal analysis and evaluation methods suggested, and application potentials discussed. Acousto-ultrasonics is an NDE technique combining aspects of acoustic emission methodology with ultrasonic simulation of stress waves. This approach uses analysis of simulated stress waves for detecting and mapping variations of mechanical properties. Unlike most NDE, acousto-ultrasonics is less concerned with flaw detection than with the assessment of the collective effects of various flaws and material anomalies. Acousto-ultrasonics has been applied chiefly to laminated and filament-wound fiber reinforced composites. It has been used to assess the significant strength and toughness reducing effects that can be wrought by combinations of essentially minor flaws and diffuse flaw populations. Acousto-ultrasonics assesses integrated defect states and the resultant variations in properties such as tensile, shear, and flexural strengths and fracture resistance. Matrix cure state, porosity, fiber orientation, fiber volume fraction, fiber-matrix bonding, and interlaminar bond quality are underlying factors.

Vary, Alex↗
NASA NTRS1988

The acousto-ultrasonic approach

The nature and underlying rationale of the acousto-ultrasonic approach is reviewed, needed advanced signal analysis and evaluation methods suggested, and application potentials discussed. Acousto-ultrasonics is an NDE technique combining aspects of acoustic emission methodology with ultrasonic simulation of stress waves. This approach uses analysis of simulated stress waves for detecting and mapping variations of mechanical properties. Unlike most NDE, acousto-ultrasonics is less concerned with flaw detection than with the assessment of the collective effects of various flaws and material anomalies. Acousto-ultrasonics has been applied chiefly to laminated and filament-wound fiber reinforced composites. It has been used to assess the significant strength and toughness reducing effects that can be wrought by combinations of essentially minor flaws and diffuse flaw populations. Acousto-ultrasonics assesses integrated defect states and the resultant variations in properties such as tensile, shear, and flexural strengths and fracture resistance. Matrix cure state, porosity, fiber orientation, fiber volume fraction, fiber-matrix bonding, and interlaminar bond quality are underlying factors.

Vary, Alex↗
NASA NTRS1989

Improvements and applications of a streamwise upwind algorithm

An improved streamwise upwind algorithm has been used to study conical flow fields. In the present method, additional terms have been introduced in the cross-flow direction to prevent solution decoupling in supersonic flows, and the local Mach number is taken into account in order to evaluate the rotated differencing. It is found that the formula captures oblique shock waves in the same manner as Roe's (1986) formula, has good convergence properties, and accurately computes shear flows.

Obayashi, Shigeru↗
NASA NTRS1989

On hypersonic shock layer and its extension beyond the Navier-Stokes level

An extension of the continuum model beyond the Navier-Stokes (NS) level and related issues on problem formulation are examined for a hypersonic shock layer on the basis of Grad's thirteen-moment equations for a Maxwell gas. The 13-moment system, simplified consistently with a fully viscous version of the thin shock-layer approximation, permits correlation with the corresponding NS-based solution. With the exception of pressure and density, several flow properties including normal stress, shear stress and normal heat flux along a streamline are unaffected by translational nonequilibrium and are therefore predicted correctly by the NS solution to the leading order, even in a domain far from translational equilibrium where molecular-transport processes rank equally with the convection.

Cheng, H. K.↗
NASA NTRS2001

Longtime Durability of PMR-15 Matrix Polymer at 204, 260, 288, and 316 C

Isothermal weight loss studies at the Glenn (Lewis) Research Center were conducted at four temperatures (204, 260, 288, and 316 C) with specimens of varied geometric shapes to investigate the mechanisms involved in the thermal degradation of PMR-15. Both neat resin behavior and composite behaviors were studied. Two points of interest in these studies are the role(s) of oxygen in the mechanisms involved in the thermo-oxidative degradation of these composite materials and the dimensional changes that occur during their useable lifetime. Specimen dimensional changes and surface layer growth were measured and recorded. It was shown that physical and chemical changes take place as a function of time and location in PMR-15 neat resin and composites as aging takes place in air at elevated temperatures. These changes initiate at the outer surfaces of both materials and progress inward following the oxygen as it proceeds by diffusion into the central core of each material. Microstructural changes cause changes in density, material shrinkage (strains), glass transition temperature, dimension, dynamic shear modulus, and compression properties. These changes also occur slowly dividing the polymer material into two distinct parts: a visibly undamaged core section between two visibly damaged surface layers. The surface layer has a significant effect on compression properties of thinner specimens, but the visibly undamaged core material controls these properties for specimens having eight or more plies. It was demonstrated that there are three different mechanisms involved in the degradation of PMR-15 during aging at elevated temperatures. These are a weight gain, a small weight fraction bulk material weight loss, and a large mass fraction weight loss concentrated at the surface of the polymer or composite. At the higher temperatures (260 C and above), the surface loss predominates. Below 260 C, the surface loss and the bulk core loss become more equivalent. Between 175 and 260 C, the initial weight change is due to a weight gain mechanism with a visible lifetime that diminishes as the aging temperature increases.

Bowles, Kenneth J.↗