Search NASA⌕ Search

SEARCH · Search NASA

Results for “SOLID PHASE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Ab Initio Phase Diagram of Tungsten

The phase diagram of tungsten (W) to a pressure (P) of 2500 GPa is investigated using a comprehensive ab initio approach that includes (i) the calculation of the zero temperature (T) free energies (enthalpies) of different solid structures, (ii) the quantum molecular dynamics simulation of the melting curves of different solid structures, (iii) the derivation of the analytic form for the solid-solid phase transition boundary, and (iv) the simulations of the solidification of liquid W into the final solid states on both sides of the solid-solid phase transition boundary, in order to confirm the corresponding analytic form. There are two solid structures confirmed to be present on the phase diagram of W, the ambient body-centered cubic (bcc) and the high-pressure double hexagonal close-packed (dhcp). At T = 0, the bcc-dhcp transition occurs at 1060 GPa, and the transition boundary has a positive slope dT/dP : the bcc-dhcp-liquid triple point is at (P, T) = (1675 GPa, 23680 K).

36 MATERIALS SCIENCE↗
DOE OSTI2022

Compositionally graded aluminum-silicon alloy fabricated via friction extrusion

Herein, a novel solid-phase gradient alloying technique was developed for a high throughput composition-microstructure-mechanical property assessment. Friction extrusion of a two-piece billet setup facilitated the formation of a seamless compositionally graded aluminum (Al)-silicon (Si) extrudate rod, with Si concentration in Al matrix gradually increasing from ~1 at% at one end to ~7 at% at the other end of the rod. We observed a strong dependence of the Al grain size, morphology, and texture on the Si concentration. The Si particles pinned the recrystallized grain boundaries resulting in refined (< 10 µm) and textured grains in the high Si content region, while the Al grains in the low Si region are equiaxed, randomly textured, and with a larger average size (~50 µm). The hardness of Al-Si gradient extrudate increases by ~50% percent with a 6 at% increase in Si content due to Hall Petch and particle strengthening effects. Our approach demonstrates the use of a solid phase processing technique to successfully produce a defect-free continuously compositionally graded bulk components thus overcoming the limitations of porosity and material heterogeneities commonly observed in other techniques such as by additive laser deposition.

36 MATERIALS SCIENCE↗
DOE OSTI2023

In-situ observation of single-phase compositionally-complex oxide formation during high-pressure and high-temperature synthesis

Compositionally-complex oxides (CCOs) with equal or non-equal atomic ratios of multi-principal cations are single-phase solid solutions and possess unique structural characteristics and correlated possibilities for tailorable and exceptional functionalities. However, breakdown of single-phase structure and phase separation impair widespread adoption of CCOs under in-service environments. Here, in-situ phase transformation during high-pressure and high-temperature synthesis of an exemplary CCO (CeZrHf) 0.852 (YbY) 0.148 O 2-δ is for the first time clarified by using synchrotron X-ray energy dispersive diffraction. During synthesizing at ~4.5 GPa inside a large-volume press, ZrO 2 and HfO 2 gradually initiate lattice diffusion as monoclinic (022) and (220) peaks collapse and merge completely at 973 K; CeO 2 starts diffusing as the dramatic intensity change of cubic (220) peak above 1073 K, causing a metastable phase formation; single-phase solid solution ultimately forms at 1673 K. Importantly, the results revealed provide in-depth understanding of phase transformation dynamics and insights for novel design paradigm of CCOs.

36 MATERIALS SCIENCE↗
NASA NTRS1971

The effect of solute additions on the steady-state creep behavior of dispersion-strengthened aluminum.

The effect of solute additions on the steady-state creep behavior of coarse-grained dispersion-strengthened aluminum alloys was studied. Recrystallized dispersion-strengthened solid solutions were found to have stress and temperature sensitivities quite unlike those observed in single-phase solid solutions having the same composition and grain size. The addition of magnesium or copper to the matrix of a recrystallized dispersion-strengthened aluminum causes a decrease in the steady-state creep rate which is much smaller than that caused by similar amounts of solute in single-phase solid solutions. All alloys exhibited essentially a 4.0 power stress exponent in agreement with the model of Ansell and Weertman. The activation energy for steady-state creep in dispersion-strengthened Al-Mg alloys, as well as the stress dependence, was in agreement with the physical model of dislocation climb over the dispersed particles.

Reynolds, G. H.↗
NASA NTRS1971

The polymorphic and mesomorphic behavior of four esters of cholesterol.

The techniques of differential scanning calorimetry, X-ray powder diffractometry, and positron annihilation have been used to study the polymorphic and mesomorphic behavior of the following esters of cholesterol: cholesteryl formate, cholesteryl butyrate, cholesteryl benzoate, and cholesteryl cinnamate. Each of these compounds exhibits a single mesophase of the cholesteric type. The solid phase formed from the melt for each ester was observed to be structurally different from the solid phase obtained from solution. Solvents from which the solution-grown samples were crystallized were as follows: cholesteryl formate and cholesteryl butyrate from acetone, cholesteryl benzoate from benzene, and cholesteryl cinnamate from 2-butanone.

Merritt, W. G.↗
NASA NTRS1988

Interactions between HCl, NO(x), and H2O ice in the Antarctic stratosphere - Implications for ozone

The role of PSC particles in determining the distributions of HCl and chlorine radicals is studied. The thermodynamics of HCl in ice is discussed, showing that significant quantities of HCl may be dissolved in ice when PSCs form. It is argued that HCl and HNO3 will be removed from the gas phase early in the condensation process, when only small quantities of H2O have been condensed, reflecting the thermodynamic properties of the solid phases of HCl, HNO3, and H2O. Rapid heterogeneous chemical reactions then volatilize reactive chlorine gases and convert NO(x) to solid-phase nitrates, which can be removed by gravitational settling. Analysis of the suite of heterogeneous chemical processes in the polar stratosphere implies a threshold for HCl concentrations, above which chemical loss rates for ozone increase dramatically.

Wofsy, S. C.↗
DOE OSTI2020

Scale and rate in CdS pressure-induced phase transition

Here, we describe recent efforts to improve our predictive modeling of rate-dependent behavior at, or near, a phase transition using molecular dynamics simulations. Cadmium sulfide (CdS) is a well-studied material that undergoes a solid-solid phase transition from wurtzite to rock salt structures between 3 and 9 GPa. Atomistic simulations are used to investigate the dominant transition mechanisms as a function of orientation, size and rate. We found that the final rock salt orientations were determined relative to the initial wurtzite orientation, and that these orientations were different for the two orientations and two pressure regimes studied. The CdS solid-solid phase transition is studied, for both a bulk single crystal and for polymer-encapsulated spherical nanoparticles of various sizes.

42 ENGINEERING↗
DOE OSTI2024

Technetium-99M generator for enriched molybdenum

A method for separating a parent isotope from a daughter isotope is provided, the method comprising supplying irradiated target; dissolving the irradiated target; treating the dissolved irradiated target to a precipitation step to form a first solid phase of the parent isotope and a first liquid phase of the daughter isotope; filtering the first liquid phase of daughter isotope to create a first purified fraction of the daughter isotope to create a second solid phase of the parent isotope and a second liquid phase of the daughter isotope; and filtering the second liquid phase to create a second liquid fraction of the daughter isotope. The process can be repeated until the 99 Mo is exhausted and the enriched target material 98 Mo or 100 Mo can be easily re-used.

Brown, Michael A.↗
DOE OSTI2024

Simulant Development of Potential 200 West Area Waste Feeds

Preliminary planning for retrieval, qualification, and pretreatment of waste in Hanford’s 200 West Area (200W) has begun as part of the West Area Risk Management project. Experimental studies to technically mature pretreatment process operations will likely be needed because of the uniqueness of 200W waste. Pacific Northwest National Laboratory formulated five simulants to represent 200W-qualified feed based on the preliminary flowsheet provided by Washington River Protection Solutions, LLC. The simulant recipes were devised using applicable historical information as a reference point to support the use of the flowsheet waste vectors, which were combined into five distinct groups. These five groups formed the basis for the liquid composition targets that were adapted into recipes using charged-balanced salt species. The liquid phase recipes were batched in 1-L quantities and analyzed at Pacific Northwest National Laboratory. Once confirmed to be stable, the liquid solutions were tested for compatibility with candidate solid components. Specific solid components were recommended based on cross-examining the proposed solid phases in the flowsheet with relevant data from the literature. Mixtures of solid components were added to aliquots of the liquid batches and sub-sampled to measure particle size distribution. The measured distribution was compared to independently created benchmark distributions appropriate for each simulant. This process was iterated until a solid phase composition that resulted in a representative particle size distribution was found. After the final compositions were confirmed, a suite of chemical and physical characterization data was collected. This report describes the simulant basis, formulation methodology, laboratory measurements, and data collected for the recipes recommended to represent 200W waste feeds.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Sorption of rare-earth elements onto a ligand-associated media for pH-dependent extraction and recovery of critical materials

Toward recovering rare-earth elements, we prepared a solid-phase media that binds and elutes metals for extraction and enrichment. We report the synthesis and methodology for a solid-phase media that exhibits pH-dependent binding of aqueous rare-earth elements. The media shows pH-dependent binding of Nd III and retains efficiency over at least six cycles of binding and elution. Mixed solutions of rare-earth elements demonstrated a preference for mid and heavy rare-earth elements based on thermodynamic binding preferences of the ligand, and selectivity for rare-earth elements over iron and aluminum were observed with coal fly ash leachate. In conclusion, we expect this new recovery method to be a significant step towards aqueous-based extraction and enrichment of critically important rare-earth elements.

01 COAL, LIGNITE, AND PEAT↗
NASA NTRS1972

Investigation of the Ignition and Burning of Materials in Space Cabin Atmospheres. Part 1: Ignition and Burning of Material

An analytical study of the theory of ignition and burning of a plastic material immersed in an atmosphere of a space cabin which may be subjected to gravity force changes is considered. The hazardous condition in a space cabin environment where the changes of gravity may effect the combustion process is evaluated. The model considered the analysis of the coupled gas and solid phases and is based on the premise that material heating leads to the formation of pyrolysis gases from the decomposed solid which then react with the ambient oxidizer to further the combustion process. Moreover, free convection plays a dominant role in transporting these hot gases to the virgin material. A time-dependent study of the coupled gas-solid model as required for ignition processes with emphasis on the surface energy interchange of the gas and solid phases has been made. Detailed distribution of species composition and temperature patterns provide a spatial and time map of the evolving gases from the material combustion.

Lew, H. G.↗
DOE OSTI2022

Modeling wave propagation in elastic solids via high-order accurate implicit-mesh discontinuous Galerkin methods

Here, a high-order accurate implicit-mesh discontinuous Galerkin framework for wave propagation in single-phase and bi-phase solids is presented. The framework belongs to the embedded-boundary techniques and its novelty regards the spatial discretization, which enables boundary and interface conditions to be enforced with high-order accuracy on curved embedded geometries. High-order accuracy is achieved via high-order quadrature rules for implicitly-defined domains and boundaries, whilst a cell-merging strategy addresses the presence of small cut cells. The framework is used to discretize the governing equations of elastodynamics, written using a first-order hyperbolic momentum-strain formulation, and an exact Riemann solver is employed to compute the numerical flux at the interface between dissimilar materials with general anisotropic properties. The space-discretized equations are then advanced in time using explicit high-order Runge–Kutta algorithms. Several two- and three-dimensional numerical tests including dynamic adaptive mesh refinement are presented to demonstrate the high-order accuracy and the capability of the method in the elastodynamic analysis of single- and bi-phases solids containing complex geometries.

42 ENGINEERING↗
DOE OSTI2022

Identification of a quasi-liquid phase at solid–liquid interface

Abstract An understanding of solid–liquid interfaces is of great importance for fundamental research as well as industrial applications. However, it has been very challenging to directly image solid–liquid interfaces with high resolution, thus their structure and properties are often unknown. Here, we report a quasi-liquid phase between metal (In, Sn) nanoparticle surfaces and an aqueous solution observed using liquid cell transmission electron microscopy. Our real-time high-resolution imaging reveals a thin layer of liquid-like materials at the interfaces with the frequent appearance of small In nanoclusters. Such a quasi-liquid phase serves as an intermediate for the mass transport from the metal nanoparticle to the liquid. Density functional theory-molecular dynamics simulations demonstrate that the positive charges of In ions greatly contribute to the stabilization of the quasi-liquid phase on the metal surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Morphology Evolution in Self-Healing Liquid-Gallium-Based Mg-Ion Battery Anode

Conventional solid battery anodes suffer from dendrite growth and volume changes, resulting in poor cycling performances. Self-healing electrodes made of liquid metals and alloys can overcome these issues by reversibly undergoing liquid–solid phase transformations during (dis)charging. Just recently, we achieved 1000 cycles in Mg-ion battery anodes using liquid Ga as the active material, which reversibly transformed into solid Mg 2 Ga 5 during (de)magnesiation. However, the fundamental mechanism behind this liquid–solid phase transformation remains unclear. In this follow-up work, cryogenic focused ion beam electron microscopy is used to elucidate the morphology evolution when liquid Ga embedded in a carbon-binder matrix transforms into solid Mg 2 Ga 5 during cycling. We found that liquid Ga gradually diffuses into the surrounding matrix, increasing the contact area between active material and electrolyte, facilitating the charge transfer process. These new insights will help understand the performance of alkali- and alkaline-earth-metal batteries based on liquid anodes.

25 ENERGY STORAGE↗
NASA NTRS1991

Optically indicating surface de-icing fluids

An optically indicating de-icing solution for surfaces comprising a freezing point depressant liquid and a compound which exhibits a visually observable change as solid phase domains become present in the solution is disclosed. When applied to a surface, particularly the surface(s) of aircraft, the formation of solid phase ice domains in the liquid provides a distinct and visible change in the appearance of the solution. This allows a determination of ice formation upon the aircraft as well as a determination of the effectiveness of the de-icing solution.

Hansman, Jr., R. John↗
NASA NTRS1984

Singlet oxygen generator for a solar powered chemically pumped iodine laser

The potential of solid phase endoperoxides as a means to produce single-delta oxygen in the gas phase in concentrations useful to chemical oxygen-iodine lasers was investigated. The 1,4 - endoperoxide of ethyl 3- (4-methyl - 1-naphthyl) propanoate was deposited over an indium-oxide layer on a glass plate. Single-delta oxygen was released from the endoperoxide upon heating the organic film by means of an electrical discharge through the conductive indium oxide coating. The evolution of singlet-delta oxygen was determined by measuring the dimol emission signal at 634 nm. Comparison of the measured signal with an analytic model leads to two main conclusions: virtually all the oxygen being evolved is in the singlet-delta state and in the gas phase, and there is no significant quenching other than energy pooling on the time scale of the experiment (approximately 10 msec). The use of solid phase endoperoxide as a singlet-delta oxygen generator for an oxygen-iodine laser appears promising.

Busch, G. E.↗
NASA NTRS1983

Theoretical study of the freezing of polystyrene sphere suspensions

A theoretical study of melting in aqueous suspensions of polystyrene spheres is presented. The Helmholtz free energies of the liquid and solid phase of the suspensions are calculated as functions of sphere number density and electrolyte concentrations. The results tend to show that the freezing curve of such suspensions is that of a conventional classical liquid with repulsive short-range interactions. The interactions can be treated satisfactorily within a slightly modified Debye-Hueckel approximation. The modifications include size correction and a correction for nonlinear screening. The results are confirmed by analogous calculations for the solid phase, and for the line along which liquid and solid free energies are equal.

Shih, W.-H.↗
DOE OSTI2025

Dynamic compression effects of H 2 ⁡O in a dynamic diamond anvil cell: Origin of metastable ice VII and its crystal growth kinetics

We report on the structural verification of metastable ice VII solidifying in the phase space of ice VI at 1.80 GPa at room temperature. Using time-resolved (TR) x-ray diffraction and TR ruby luminescence paired with high-speed microphotography utilizing a dynamic diamond anvil cell, an initial compression rate range from 0.12 to 95.84 GPa/s was explored. The solidification pressure of metastable ice VII has a potential sigmoidal dependence upon compression rate with a turnover compression rate of ∼80 GPa/s. The preferred crystallization of ice VII in the stability field of ice VI is due to the increased nucleation rate of ice VII over ice VI at 1.77 GPa that is driven by the surface energy difference between the liquid and solid phases along with the change in Gibbs free energy of solidification. The dynamic pressure-volume–compression behaviors of ice phases (VI and VII) show a lattice stiffening in both phases, especially during the compression loading. It is also found that the compression rate greatly affects the solid-solid phase transition between ice VI and VII but does not affect the liquid-solid transition between water and ice VI as much. Lastly, a third phase transition was found to occur after metastable ice VII transforms into high-density amorphous (HDA) ice, which could be a disordered hydrogen-bonded network configuration of ice VII forming out of HDA ice facilitated by the decoupling of the oxygen movement and reorientation of the H 2⁡ O molecule. These results demonstrate the complexity of a seemingly simple molecule H 2⁡ O, how it can readily change its static properties with the modification of (de)compression rate, and highlight the need to use multiple TR structural and spectroscopic probes at higher time resolutions to realize the most comprehensive understanding.

Chemical bonding↗