SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A simulator which generates and transmits a beam of audible sound energy mathematically similar to the SPS power beam is described. The simulator provides a laboratory means for analysis of ground based closed loop SPS phase control and of ionospheric effects on the SPS microwave power beam.
A summary design analysis of a GaAs power conversion system for the solar power satellite (SPS) is presented. Eight different satellite configuration options for the solar arrays are compared. Solar cell annealing effects after proton irradiation are considered. Mass estimates for the SPS and the effect of solar cell parameters on SPS array design are discussed.
A simulator is described which generates and transmits a beam of audible sound energy mathematically similar to the solar power satellite (SPS) power beam. The simulator provides a laboratory means for analysis of ground based closed loop SPS phase control and of ionospheric effects on the SPS microwave power beam.
The solar power satellite (SPS) technical parameters that are needed to accurately assess the electromagnetic compatibility (EMC) between SPS systems and DoD communications-electronics (C-E) systems are identified and assessed. The type of electromagnetic interactions that could degrade the performance of C-E systems are described and the major military installations in the southwestern portions of CONUS where specially sensitive C-E systems are being used for combat training and evaluation are identified. Classes of C-E systems that are generally in the vicinity of these military installations are considered. The Technical parameters that govern the degree of compatibility of the SPS with these C-E systems, and some technical requirements that are necessary to ensure short-term and long-term EMC are identified.
A compilation of background information and a preliminary assessment of the potential risks to workers from the ionizing radiation encountered in space is provided. The report: (1) summarizes the current knowledge of the space radiation environment to which space workers will be exposed; (2) reviews the biological effects of ionizing radiation considered of major importance to a SPS project; and (3) discusses the health implications of exposure of populations of space workers to the radiations likely to penetrate through the shielding provided by the SPS work stations and habitat shelters of the SPS Reference System.
Market penetration as a function time, SPS performance factors, and market/economic considerations was estimated, and commercialization strategies were formulated. A market analysis task included personal interviews and supplemental mail surveys to acquire statistical data and to identify and measure attitudes, reactions and intentions of prospective SPS users. Interviews encompassed three ownership classes of electric utilities and industrial firms in the SIC codes for energy consumption. A market demand model was developed which utilized the data base developed, and projected energy price and consumption data to perform sensitivity analyses and estimate potential market for SPS.
The microwave power transmission and reception system of the Satellite Power System (SPS) has been intensively reviewed and assessed in a three-year concept development and evaluation program. This paper will review some concepts of SPS with particular emphasis on the design of the microwave power transmission and reception system. Technology requirements and proposals for meeting them will be discussed for various parts of the microwave system and to some degree for critical components such as power amplifiers. Specific subjects to be discussed are SPS concepts, antenna design, phase control, rectenna, and technology.
The phase control system is the fundamental element in the forming, steering and control of the solar power satellite (SPS) microwave power beam. This system must in essence automatically adjust the phase at each of the transmitter's 101,552 power amplifiers to compensate for differences in transmission path lengths to the earth-based receiving antenna (rectenna). SPS phase control system requirements are discussed, taking into account system concepts, a reference system description, reference system performance, ground based phase control concepts, and ionosphere considerations. It is pointed out that the importance of determining the ionospheric effects cannot be overemphasized. The permissable power density limit through the ionosphere is a critical SPS sizing factor and the phase control system must be able to accommodate errors induced by a heated ionosphere.
This report states what is known, uncertain, and unknown about the Solar Power Satellite (SPS) concept - collecting solar energy in space and delivering the energy to Earth for the production of baseload electricity. This report discusses the important technical, environmental, and cost goal questions that must be answered prior to making a commitment to the SPS concept. Although significant technological, environmental and economic questions remain to be answered, the preliminary investigations undertaken in the Concept Development and Evaluation Program do provide a basis for a policy decision on further commitment. This report also suggests areas of research and experimentation required to acquire the knowledge by which a series of informed, time-phased decisions may be made concerning the possibility of the SPS concept playing a major role in the United States' energy future.
The object of this investigation is to determine the grating lobe characteristics for the SPS (solar power satellite) microwave power beam. Using techniques of Fourier array decomposition, equations, and numerical results are given for the complete SPS microwave antenna pattern (main beam plus grating lobes). In order to ensure the grating lobe peaks are below the environmental guideline of 0.01 mW/sq cm, constraints are defined for the mechanical alignment (tilt) of the SPS antenna and the satellite attitude control system. Two conditions, phase control to the subarray level and to the power module (tube) level, are analyzed as to their effects upon grating lobes.
The paper summarizes a system study of the solar power satellite (SPS) concept which was conducted in the 1977-1980 time period. The system study was sponsored by the U.S. Department of Energy and the National Aeronautics and Space Administration as part of an SPS Concept Development and Evaluation Program. A reference system, developed during the study is described. The reference system was subsequently used as a basis for environmental, economic, and societal assessments. The reference system was recognized as probably not being an optimized approach. A number of alternate approaches which were studied in less depth are also described. The paper concludes with a number of observations regarding the SPS concept, and the pertinence of ongoing space technology, development, and flight programs to various aspects of the concept.
Attention is given to recent advances in the technologies needed to build and transport a Solar Power satellite. Among the areas of NASA sponsored SPS research are: the application of ground-based, electronically steerable arrays to the SPS space-based microwave transmitting antenna; and the application of microwave transmission technology to a low-cost LEO-to-GEO transportation system to build the SPS. A photograph of a thin-film etched circuit rectenna for powering the LEO-to-GEO transportation system is provided.
The SPS product, Classic-Ada, is a software tool that supports object-oriented Ada programming with powerful inheritance and dynamic binding. Object Oriented Design (OOD) is an easy, natural development paradigm, but it is not supported by Ada. Following the DOD Ada mandate, SPS developed Classic-Ada to provide a tool which supports OOD and implements code in Ada. It consists of a design language, a code generator and a toolset. As a design language, Classic-Ada supports the object-oriented principles of information hiding, data abstraction, dynamic binding, and inheritance. It also supports natural reuse and incremental development through inheritance, code factoring, and Ada, Classic-Ada, dynamic binding and static binding in the same program. Only nine new constructs were added to Ada to provide object-oriented design capabilities. The Classic-Ada code generator translates user application code into fully compliant, ready-to-run, standard Ada. The Classic-Ada toolset is fully supported by SPS and consists of an object generator, a builder, a dictionary manager, and a reporter. Demonstrations of Classic-Ada and the Classic-Ada Browser were given at the workshop.
A modified version of the Satellite Solar Power System (SPS) is proposed. The original SPS was conceived by Dr. Peter Glaser of MIT in 1968, as a series of large, photovoltaic solar collectors orbiting at geosynchronous altitude, and converting and beaming the collected solar power to the earth surface using microwave energy (which can pass through cloud cover). This system has been studied extensively in the past. The modified version of the SPS will make use of the moon as the 'satellite'.
Selective availability (SA) degrades the positioning accuracy for nondifferential users of the GPS Standard Positioning Service (SPS). The often quoted SPS accuracy available under normal conditions is 100 m 2DRMS. In the absence of more specific information, many prospective SPS users adopt the 100 m value in their planning, which exaggerates the error in many cases. SA error is examined for point positioning and dynamic orbit determination for an orbiting user. To minimize SA error, nondifferential users have several options: expand their field of view; observe as many GPS satellites as possible; smooth the error over time; and employ precise GPS ephemerides computed independently, as by NASA and the NGS, rather than the broadcast ephemeris. Simulations show that 3D point position error can be kept to 30 m, and this can be smoothed to 3 m in a few hours.
The possible role of Solar Power Satellites (SPS) in advancing the goals of the Space Exploration Initiative is considered. Three approaches are examined: (1) the use of lunar raw materials to construct a large SPS in GEO, (2) the construction of a similar system on the lunar surface, and (3) a combination of (1) and (2). Emphasis is given to the mining of He-3 from the moon and its use by the SPS.
The Office of Advanced Concepts at NASA recently initiated a re-analysis of the 'Solar Power Satellite' (SPS) concept. The ground rule for the analysis was that a project of such size (and more particularly, cost) as the 1980 baseline concept is out of the question in today's world. The study questions are: (1) have technology improvements since the 1980 studies made SPS concepts more feasible?; and (2) are new architectures or concepts for SPS possible which would reduce the cost? These issues were posed to the workshop conducted at the SPRAT Conference, with the intent of soliciting input from experts on space photovoltaic technology.
The installation of the Space Telescope Imaging Spectrograph (STIS) on the Hubble Space Telescope (HST) allows for the first time two-dimensional optical and ultraviolet slitless spectroscopy of faint objects from space. The STIS Parallel Survey (SPS) routinely obtains broad band images and slitless spectra of random fields in parallel with HST observations using other instruments. The SPS is designed to study a wide variety of astrophysical phenomena, including the rate of star formation in galaxies at intermediate to high redshift through the detection of emission-line galaxies. We present the first results of the SPS, which demonstrate the capability of STIS slitless spectroscopy to detect and identify high-redshift galaxies.