Search NASA⌕ Search

SEARCH · Search NASA

Results for “STREAMLINE FLOW”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Radiative viscous-shock-layer analysis of Fire, Apollo, and PAET flight data

Equilibrium, radiating viscous-shock-layer solutions are obtained for a number of trajectory points of the Fire II, Apollo 4, and PAET experimental flight vehicles. Convective heating rates calculated by a benchmark code agree well, except at high altitudes corresponding to low densities, with two engineering correlations. Calculated radiation intensities are compared with the flight radiometer data and with inviscid flow results. Differences as great as 70 percent are observed between measured data and the viscous calculations. Viscous effects reduce the intensity toward the wall, because of boundary-layer absorption, by as much as 30 percent, compared with inviscid intensities. Preliminary chemical and thermal nonequilibrium flow calculations along a stagnation streamline for a PAET trajectory predict enhancement of radiation owing to chemical relaxation. Stagnation point solutions are also presented for future air-assisted orbital transfer vehicle geometries with nose radii ranging from 0.3 to 15 m.

Balakrishnan, A.↗
NASA NTRS1987

Wall shear stress measurement in blade end-wall corner region

The magnitude and the direction of wall shear stress and surface pressure in the blade end-wall corner region were investigated. The measurements were obtained on a specially designed Preston tube, the tip of which could be concentrically rotated about its axis of rotation at the measurement location. The magnitude of wall shear stress in the vicinity of the corner was observed to increase significantly (170 percent) compared to its far-upstream value; the increase was consistently higher on the blade surface compared to the value on the plate surface of the blade end-wall corner. On both surfaces in the blade end-wall corner, the variation of the wall shear stress direction was found to be more predominant in the vicinity of the blade leading-edge location. The trend of the measured wall shear stress direction showed good agreement with the limiting streamline directions obtained from the flow visualization studies.

Bhargava, R.↗
NASA NTRS1990

Correlation of boundary layer stability analysis with flight transition data

Recently, NASA completed a boundary-layer transition flight test on an F-14 aircraft which has variable-sweep capability. Transition data were acquired for a wide variety of sweep angles, pressure distributions, Mach numbers, and Reynolds numbers. In this paper, the F-14 flight test is briefly described and N-factor correlations with measured transition locations are presented for one of two gloves flown on the F-14 wing in the flight program; a thin foam and fiberglass glove which provided a smooth sailplane finish on the basic F-14, modified NACA 6-series airfoil. For these correlations, an improved linear boundary-layer stability theory was utilized that accounts for compressibility and surface and streamline curvature effects for the flow past swept wings.

Collier, F. S., Jr.↗
NASA NTRS1991

Flow downstream of the heliospheric terminal shock - Magnetic field kinematics

A kinematic model of the interplanetary magnetic field in the heliosheath beyond the solar wind terminal shock is presented in order to evaluate the possible importance of MHD effects in that region of space. The need for this evaluation arises because the interplanetary magnetic field is compressed across the terminal shock and further amplified by the decreasing flow speed beyond the shock. Streamlines which approach the stagnation point before turning in the downstream direction lead to the strongest effects due to the extreme slowing of the solar wind and consequent compression of the embedded magnetic field. The magnetic volume force therefore cannot be neglected on streamlines that approach the heliopause in the upstream direction, where the volume containing them is a large fraction of the overall of the heliosheath in the upstream direction. The increase in the magnetic pressure may act to bring the upstream terminal shock significantly closer to the sun, potentially reconciling a conflict between models and observations.

Nerney, S.↗
NASA NTRS1998

Computational Aeroheating Predictions for X-34

Radiative equilibrium surface temperatures, heating rates, streamlines, surface pressures, and flow-field features as predicted by the Langley Aerothermodynamic Upwind Relaxation Algorithm (Laura) are presented for the X-34 Technology Demonstrator. Results for two trajectory points corresponding to entry peak heating and two control surface deflections are discussed. This data is also discussed in context of Thermal Protection System (TPS) design issues. The work presented in this report is part of a larger effort to define the X-34 aerothermal environment, including the application of engineering codes and wind-tunnel studies.

Kelb, William L.↗
NASA NTRS1998

Computational Aeroheating Predictions for X-34

Radiative equilibrium surface temperatures, heating rates, streamlines, surface pressures, and flow-field features as predicted by the Langley Aerothermodynamic Upwind Relaxation Algorithm (LAURA) are presented for the X-34 Technology Demonstrator. Results for two trajectory points corresponding to entry peak heating and two control surface deflections are discussed. This data is also discussed in the context of Thermal Protection System (TPS) design issues. The work presented in this report is part of a larger effort to define the X-34 aerothermal environment, including the application of engineering codes and wind-tunnel studies.

Kleb,William H.↗
NASA NTRS1986

Radiative Viscous Shock Layer Analysis of Fire, Apollo, and PAET Flight Data

Equilibrium, radiating viscous shock layer solutions are obtained for a number of trajectory points of the Fire II, Apollo 4, and PAET experimental flight vehicles. Convective heating rates calculated by a benchmark code agree well with two engineering correlations, except at high altitudes corresponding to low densities. Calculated radiation intensities are compared with the flight radiometer data and with inviscid flow results. Differences as great as 70% are observed between measured data and the viscous calculations. Because of boundary-layer absorption, viscous effects reduce the intensity to the wall by as much as 30% compared with inviscid intensities. Preliminary chemical and thermal nonequilibrium flow calculations along a stagnation streamline for a PAET trajectory predict an enhancement to the radiation owing to the chemical relaxation. Stagnation point solutions are also presented for future aeroassisted orbital transfer vehicle geometries with nose radii of 0.3-15 m.

Balakrishnan, A.↗
NASA NTRS2001

Unsteady Analysis of Separated Aerodynamic Flows Using an Unstructured Multigrid Algorithm

An implicit method for the computation of unsteady flows on unstructured grids is presented. The resulting nonlinear system of equations is solved at each time step using an agglomeration multigrid procedure. The method allows for arbitrarily large time steps and is efficient in terms of computational effort and storage. Validation of the code using a one-equation turbulence model is performed for the well-known case of flow over a cylinder. A Detached Eddy Simulation model is also implemented and its performance compared to the one equation Spalart-Allmaras Reynolds Averaged Navier-Stokes (RANS) turbulence model. Validation cases using DES and RANS include flow over a sphere and flow over a NACA 0012 wing including massive stall regimes. The project was driven by the ultimate goal of computing separated flows of aerodynamic interest, such as massive stall or flows over complex non-streamlined geometries.

Pelaez, Juan↗
NASA NTRS1992

Navier-Stokes analysis and experimental data comparison of compressible flow within ducts

Many aircraft employ ducts with centerline curvature or changing cross-sectional shape to join the engine with inlet and exhaust components. S-ducts convey air to the engine compressor from the intake and often decelerate the flow to achieve an acceptable Mach number at the engine compressor by increasing the cross-sectional area downstream. Circular-to-rectangular transition ducts are used on aircraft with rectangular exhaust nozzles to connect the engine and nozzle. To achieve maximum engine performance, the ducts should minimize flow total pressure loss and total pressure distortion at the duct exit. Changes in the curvature of the duct centerline or the duct cross-sectional shape give rise to streamline curvature which causes cross stream pressure gradients. Secondary flows can be caused by deflection of the transverse vorticity component of the boundary layer. This vortex tilting results in counter-rotating vortices. Additionally, the adverse streamwise pressure gradient caused by increasing cross-sectional area can lead to flow separation. Vortex pairs have been observed in the exit planes of both duct types. These vortices are due to secondary flows induced by pressure gradients resulting from streamline curvature. Regions of low total pressure are produced when the vortices convect boundary layer fluid into the main flow. The purpose of the present study is to predict the measured flow field in a diffusing S-duct and a circular-to-rectangular transition duct with a full Navier-Stokes computer program, PARC3D, and to compare the numerical predictions with new detailed experimental measurements. The work was undertaken to extend previous studies and to provide additional CFD validation data needed to help model flows with strong secondary flow and boundary layer separation. The S-duct computation extends the study of Smith et al, and Harloff et al, which concluded that the computation might be improved by using a finer grid and more advanced turbulence models. The present study compares results for both the Baldwin-Lomas and k-epsilon turbulence models and is conducted with a refined grid. For the transition duct, two inlet conditions were considered, the first with straight flow and the second with swirling flow. The first case permits examination of the effects of the geometric transition on the flow field, while the second case includes the rotational flow effect characteristic of a gas turbine engine.

Harloff, G. J.↗
NASA NTRS1979

Martian channel morphology - Maja and Kasei Valles

Detailed geomorphic mapping from Viking imagery of selected portions of Kasei Vallis, Maja Vallis, and vicinity reveals numerous similarities of channel morphology to erosional and depositional features of the Channeled Scabland. Characteristic scabland landforms which occur in Kasei and Maja Valles include erosional grooves, streamlined uplands and hills, scour zones around flow obstacles, inner channels with erosional head cuts, breached ridges and basin (crater) rims, pendant forms (bars), erosional terracing of streamlined hills and channel margins, and possible midchannel bars. These features constitute an assemblage of landforms which on earth is most characteristic of catastrophic flood channeling in jointed bedrock. Prominent mass wastage and sapping features are associated with the high-wall relief in lower Kasei Vallis. Many cliffs along the channel margins exhibit steep upper slopes and gentler lower talus slopes which form the spur-and-gully topography that has also been described along chasma walls in the Valles Marineris. Landslides, debris fans, and debris cones can also be recognized. Much less wall modification occurs in the shallower Maja Vallis. Probably, the steep escarpments of Kasei were created by tectonic processes and subsequent channel incision. These escarpments later receded by mass wasting and sapping.

Baker, V. R.↗
NASA NTRS1975

A generalized hyperbolic marching technique for three-dimensional supersonic flow with shocks

The current paper introduces a generalized, nonorthogonal coordinate system for application to supersonic flows with such large angles between streamlines of the initial Cauchy data and the marching direction that the velocity component in the marching direction is actually subsonic. Finite-difference operators are developed to solve the three-dimensional, steady, inviscid conservation equations of fluid flow referenced to this general frame. Moreover, a new method of aligning the difference mesh to the bow shock wave is presented which eliminates both the necessity for differencing the free-stream flow properties and the spurious fluctuations that often arise in conservative variables when they are differenced across the discontinuity. Results are given for the case of flow past a conical surface.

Rizzi, A. W.↗
NASA NTRS1983

An orthogonal coordinate grid following the three-dimensional viscous flow over a concave surface

Swept wings designed for laminar flow control exhibit both centrifugal and crossflow instabilities which produce streamwise vortices that can lead to early transition from laminar to turbulent flow in the presence of Tollmien-Schlichting waves. This paper outlines an iterative algorithm for generation of an orthogonal, curvilinear, coordinate grid following the streamlines of the three-dimensional viscous flow over a swept, concave surface. The governing equations for the metric tensor are derived from the Riemann-Christoffel tensor for an Euclidian geometry. Unit vectors along streamline, normal and binormal directions are determined. The governing equations are not solved directly, but are employed only as compatibility equations. The scale factor for the streamline coordinate is obtained by an iterative integration scheme on a 200 x 100 x 5 grid, while the other two scale factors are determined from definitions. Sample results are obtained which indicate that the compatibility equation error decreases linearly with grid step size. Grids smaller than 200 x 100 x 5 are found to be inadequate to resolve the grid curvature.

Dagenhart, J. R↗
NASA NTRS1978

Morphometry of streamlined forms in terrestrial and Martian channels

Streamlined erosional forms in the Channeled Scabland are compared with streamline features recognized in the region of the Kasei Vallis on Mars shown in Viking imagery. The morphometric analysis considers three physical parameters, length, measured parallel to the suggested flow direction; width, taken as the maximum width of the streamlined form perpendicular to the flow direction; and area, measured with a grid placed over the surface. These parameters are used to calculate a dimensionless parameter k, defined as the square of the length multiplied by pi over four times the area. For the 137 Scabland forms studied k values range from 1.0 to 8.3 with an average of 3.2. The k values for 47 Martian streamlined forms range from 1.5 to 12.0 with an average of 3.8. The rough similarity of these results suggests that the terrestrial and Martian features were formed by similar processes. The forms appear to have developed an ideal shape, sufficiently elongated to reduce pressure drag in the fluid creating them, but not so long as to create excessive skin resistance.

Baker, V. R.↗
NASA NTRS1996

A Galilean Invariant Explicit Algebraic Reynolds Stress Model for Curved Flows

A Galilean invariant weak-equilbrium hypothesis that is sensitive to streamline curvature is proposed. The hypothesis leads to an algebraic Reynolds stress model for curved flows that is fully explicit and self-consistent. The model is tested in curved homogeneous shear flow: the agreement is excellent with Reynolds stress closure model and adequate with available experimental data.

Girimaji, Sharath↗
NASA NTRS1983

Streamwise computation of three-dimensional parabolic flows

A new approach to calculate three-dimensional parabolic flows is presented. The flow field is computed by calculating velocity along a set of streamlines. The dependent variables commonly used in the computation of three-dimensional flows are the three velocity components. In contrast, the dependent variables in the present approach are the streamwise velocity and the two coordinates, in the cross-stream plane, of the chosen streamlines. The streamwise velocity is calculated from the finite difference equations obtained by applying Euler's momentum theorem to streamtubes constructed around the chosen streamlines; the streamline coordinates are calculated from the conservation of mass. Results of the calculations, based on the present approach, are compared with the experimental data for flow through rectangular ducts; the agreement is satisfactory.

Greywall, M. S.↗
NASA NTRS1983

Reduction of flow-measurement uncertainties in laser velocimeters with nonorthogonal channels

An analysis of certain geometrical limitations inherent in the application of laser velocimeters with nonorthogonal channels has led to the development of advanced-LDA-calibration and data-acquisition techniques that minimize systematic and statistical errors, respectively. The data-acquisition technique optimizes the number of velocity samples collected from three velocimeter channels as a function of local turbulence intensity, vector direction, and prescribed confidence interval. Linear velocity surveys and streamline traces measured in a turbulent flow field with a three-dimensional laser velocimeter are presented and the validity and accuracy of the theoretical analysis are discussed.

Snyder, P. K.↗
NASA NTRS2004

Advanced Optical Diagnostic Methods for Describing Fuel Injection and Combustion Flowfield Phenomena

Over the past decade advanced optical diagnostic techniques have evolved and matured to a point where they are now widely applied in the interrogation of high pressure combusting flows. At NASA Glenn Research Center (GRC), imaging techniques have been used successfully in on-going work to develop the next generation of commercial aircraft gas turbine combustors. This work has centered on providing a means by which researchers and designers can obtain direct visual observation and measurements of the fuel injection/mixing/combustion processes and combustor flowfield in two- and three-dimensional views at actual operational conditions. Obtaining a thorough understanding of the chemical and physical processes at the extreme operating conditions of the next generation of combustors is critical to reducing emissions and increasing fuel efficiency. To accomplish this and other tasks, the diagnostic team at GRC has designed and constructed optically accessible, high pressurer high temperature flame tubes and sectar rigs capable of optically probing the 20-60 atm flowfields of these aero-combustors. Among the techniques employed at GRC are planar laser-induced fluorescence (PLIF) for imaging molecular species as well as liquid and gaseous fuel; planar light scattering (PLS) for imaging fuel sprays and droplets; and spontaneous Raman scattering for species and temperature measurement. Using these techniques, optical measurements never before possible have been made in the actual environments of liquid fueled gas turbines. 2-D mapping of such parameters as species (e.g. OH-, NO and kerosene-based jet fuel) distribution, injector spray angle, and fuel/air distribution are just some of the measurements that are now routinely made. Optical imaging has also provided prompt feedback to researchers regarding the effects of changes in the fuel injector configuration on both combustor performance and flowfield character. Several injector design modifications and improvements have resulted from this feedback. Alternate diagnostic methods are constantly being evaluated as to their suitability as a diagnostic tool in these environments. A new method currently under examination is background oriented Schlieren (BOS) for examining the fuel/air mixing processes. While ratioing the Stokes and anti-Stokes nitrogen lines obtained from spontaneous Raman is being refined for temperature measurement. While the primary focus of the GRC diagnostic work remains optical species measurement and flow stream characterization, an increased emphasis has been placed on our involvement in flame code validation efforts. A functional combustor code should shorten and streamline future combustor design. Quantitative measurements of flow parameters such as temperature, species concentration, drop size and velocity using such methods as Raman and phase Doppler anemometry will provide data necessary in this effort.

Locke, Randy J.↗