Search NASA⌕ Search

SEARCH · Search NASA

Results for “STRUCTURAL WEIGHT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Wind tunnel investigation of active controls technology applied to a DC-10 derivative

Application of active controls technology to reduce aeroelastic response offers a potential for significant payoffs in terms of aerodynamic efficiency and structural weight. As part of the NASA Energy Efficient Transport program, the impact upon flutter and gust load characteristics has been investigated by means of analysis and low-speed wind tunnel tests of a semispan model. The model represents a DC-10 derivative with increased wing span and an active aileron surface, responding to vertical acceleration at the wing tip. A control law satisfying both flutter and gust load constraints is presented and evaluated. In general, the beneficial effects predicted by analysis are in good agreement with experimental data.

Winther, B. A.↗
NASA NTRS1980

Preliminary design characteristics of a subsonic business jet concept employing an aspect ratio 25 strut braced wing

The advantages of replacing the conventional wing on a transatlantic business jet with a larger, strut braced wing of aspect ratio 25 were evaluated. The lifting struts reduce both the induced drag and structural weight of the heavier, high aspect ratio wing. Compared to the conventional airplane, the strut braced wing design offers significantly higher lift to drag ratios achieved at higher lift coefficients and, consequently, a combination of lower speeds and higher altitudes. The strut braced wing airplane provides fuel savings with an attendant increase in construction costs.

Turriziani, R. V.↗
NASA NTRS1980

The effect of thermal stresses on the integrity of three built-up aircraft structures

A Mach 6 flight was simulated in order to examine heating effects on three frame/skin specimens. The specimens included: a titanium truss frame with a lockalloy skin; a stainless steel z-frame with a lockalloy skin; and a titanium z-frame with a lockalloy skin. Thermal stresses and temperature were measured on these specimens for the purpose of examining their efficiency, performance, and integrity. Measured thermal stresses were examined with respect to material yield strengths, buckling criteria, structural weight, and geometric locations. Principal thermal stresses were studied from the standpoint of uniaxial stress assumptions. Measured thermal stresses were compared to predicted values.

Jenkins, J. M.↗
NASA NTRS1981

The long duration exposure facility structural interface

The development of an efficient structural interface between the Long Duration Exposure Facility (LDEF) and the space shuttle orbiter is discussed. Thermal gradients and manufacturing tolerances restrict the number of retention points in the shuttle to four with no more than three in one plane. Loads during the powered exit, high drag reentry, and landing are also critical factors in the location of retention points. A LDEF design is described that meets all requirements while avoiding the structural weight penalties associated with an asymmetrical arrangement. The ground handling and assembly problems are resolved in an economical and effective manner.

Long, M. J.↗
NASA NTRS1981

The balloon and the airship technological heritage

The balloon and the airship are discussed with emphasis on the identification of commonalities and distinctions. The aerostat technology behind the shape and structure of the vehicles is reviewed, including a discussion of structural weight, internal pressure, buckling, and the development of a stable tethered balloon system. Proper materials for the envelope are considered, taking elongation and stress into account, and flight operation and future developments are reviewed. Airships and tethered balloons which are designed to carry high operating pressure with low gas loss characteristics are found to share similar problems in low speed flight operations, while possessing interchangeable technologies.

Mayer, N. J.↗
NASA NTRS1980

Space Telescope - Design for orbital maintenance

Maintenance and repair of the Shuttle launched Space Telescope (ST) are examined, noting that except for the basic structure, mirrors, cables, and several noncritical items, the entire ST is replaceable or reparable on-orbit. EVA tasks have been designed to avoid contamination, and to provide a reduction in Orbital Replacement Units, a minimal number of doors and openings, and minimized structural weight associated with free-volume. All removable components have been provided with tool-compatible fittings and releases, and standardization of parts has been compromised with considerations of interface with crew handling. Replacement and repair equipment will be carried as an added parcel on Shuttle flights and are not part of the standard Shuttle components. The necessity of designing for crew-aid at ST workstations is suggested to provide sound data for the design of other space-based equipment.

Fisher, H. T.↗
NASA NTRS1982

Minimum mass sizing of a large low-aspect ratio airframe for flutter-free performance

A procedure for sizing an airframe for flutter-free performance is demonstrated on a large, flexible supersonic transport aircraft. The procedure is based on using a two-level reduced basis or modal technique for reducing the computational cost of performing the repetitive flutter analyses. The supersonic transport aircraft exhibits complex dynamic behavior, has a well-known flutter problem and requires a large finite-element model to predict the vibratory and flutter response. Flutter-free designs are produced with small mass increases relative to the wing structural weight and aircraft payload. In view of the ability of the resizing procedure to handle this supersonic transport configuration, it seems likely that the method could be used for many other aircraft.

Greene, W. H.↗
NASA NTRS1982

Sensitivity analysis of physiological factors in space habitat design

The costs incurred by design conservatism in space habitat design are discussed from a structural standpoint, and areas of physiological research into less than earth-normal conditions that offer the greatest potential decrease in habitat construction and operating costs are studied. The established range of human tolerance limits is defined for those physiological conditions which directly affect habitat structural design. These entire ranges or portions thereof are set as habitat design constraints as a function of habitat population and degree of ecological closure. Calculations are performed to determine the structural weight and cost associated with each discrete population size and its selected environmental conditions, on the basis of habitable volume equivalence for four basic habitat configurations: sphere, cylinder with hemispherical ends, torus, and crystal palace.

Billingham, J.↗
NASA NTRS1982

Polymer materials research at NASA Ames Research Center

Polymers that provide significant improvements in both efficiency and safety for civilian transport aircraft and military combat aircraft were developed. High strength to weight structures such as carbon fiber composites with long term durability are requirements common to both classes of aircraft. Aircraft safety improvements in fire resistance and crashworthiness of primary and secondary structures are long term objectives for transport aircraft. Void filler ballistic foams, intumescent coatings, and radiation-resistant transparent plastics contribute to vulnerability reduction in combat military aircraft. Low and high velocity impact tolerance, fire resistance, thermal stability, and long term durability of polymers and components are emphasized.

J. A. Parker↗
NASA NTRS1983

Performance of high-altitude, long-endurance, turboprop airplanes using conventional or cryogenic fuels

An analytical study has been conducted to evaluate the potential endurance of remotely piloted, low speed, high altitude, long endurance airplanes designed with 1990 technology. The baseline configuration was a propeller driven, sailplane like airplane powered by turbine engines that used JP-7, liquid methane, or liquid hydrogen as fuel. Endurance was measured as the time spent between 60,000 feet and an engine limited maximum altitude of 70,000 feet. Performance was calculated for a baseline vehicle and for configurations derived by varying aerodynamic, structural or propulsion parameters. Endurance is maximized by reducing wing loading and engine size. The level of maximum endurance for a given wing loading is virtually the same for all three fuels. Constraints due to winds aloft and propulsion system scaling produce maximum endurance values of 71 hours for JP-7 fuel, 70 hours for liquid methane, and 65 hours for liquid hydrogen. Endurance is shown to be strongly effected by structural weight fraction, specific fuel consumption, and fuel load. Listings of the computer program used in this study and sample cases are included in the report.

Liu, G. C.↗
NASA NTRS1982

Optimality criteria design and stress constraint processing

Methods for pre-screening stress constraints into either primary or side-constraint categories are reviewed; a projection method, which is developed from prior cycle stress resultant history, is introduced as an additional screening parameter. Stress resultant projections are also employed to modify the traditional stress-ratio, side-constraint boundary. A special application of structural modification reanalysis is applied to the critical stress constraints to provide feasible designs that are preferable to those obtained by conventional scaling. Sample problem executions show relatively short run times and fewer design cycle iterations to achieve low structural weights; those attained are comparable to the minimum values developed elsewhere.

Levy, R.↗
NASA NTRS1984

Optimization of space structures

Computational methods for the design of structures for specified transient response, truss beam units with specified attached vibration absorbers, and laminates for structural components of large space structures are examined. Equations for the measurement of structural stiffness that are maximized for a specific total mass and that will reduce the structural weight are presented. A model for a cantilevered space truss beam of a specific mass and with a specified tip vibration absorber is explained. Design criteria of the laminates include minimizing the weight as well as frequency, buckling, and global stiffness constraints. Other variables include orientation of the lamina and the thickness of each layer.

Reiss, R.↗
NASA NTRS1983

A fundamental comparison of canard and conventional configurations

This paper examines the relative efficiency of canard, tandem, and aft-tailed aircraft configurations through analysis of an elementary lifting system. Stability and trim requirements are imposed upon the system and its C sub L(max), drag, and structural weight are studied as its geometry varies over a wide range of possible configurations. During the course of the analysis, two general solutions emerge for minimum induced drag as a function of the geometry and the division of lift between the surfaces of such a system - one for fixed span and the other for fixed weight. The conclusion is that the pre-eminence of the conventional aft-tailed configuration has a sound fundamental basis, but that there may be some room for improvement.

Mcgeer, T.↗
NASA NTRS1984

Optimum design sensitivity based on approximation concepts and dual methods

An optimum design sensitivity analysis capability is reported which exploits the approximation concepts-dual method formulation of the minimum weight structural sizing problem. An efficient iterative solution technique is used to facilitate determination of sensitivity derivatives for both primal and dual variables. Estimates on the useful range of parameter perturbations, over which the optimum design sensitivity projections can be expected to yield satisfactory revised optimum designs, are also obtained. Numerical results for several example problems will be presented to illustrate the effectiveness of the capability reported.

Schmit, L. A.↗
NASA NTRS1984

Improving the efficiency of smaller transport aircraft

The efficiency of small transport aircraft can be improved through the adaptation of high altitude turbine engines, and that flights reaching altitudes of 40,000, 60,000, and 80,000 feet can show savings in both flight time and fuel consumption even for trips as short as 500 miles. Studies for a 40-passenger high altitude transport are presented. An increase in structural weight due to larger wing areas, larger engines, and larger engine frontal areas would make the ratio of gross weight to payload look less favorable, but the efficiency of the plane in passenger miles per gallon would increase with altitude. It is also suggested that supercritical airfoils be designed to achieve higher lift coefficients and speeds. A reduction of reduced drag through the use of horizontal or vertical wing tip extensions is also discussed.

Jones, R. T.↗
NASA NTRS1986

Optimization of Antenna-Structure Design

Conference paper describes application of optimality criterion to design of microwave dish antenna. For purpose of study, overall design objective is to minimize structural weight, subject to design constraints that antenna-pointing and microwave-path-length errors not exceed specified values. Design constraints and optimality criterion satisfied in same procedure.

Levy, R.↗
NASA NTRS1985

Space Shuttle orbiter trimmed center-of-gravity extension study

Aerodynamic, heat transfer, and system design studies to determine removable modifications for the Space Shuttle orbiter that would extend its forward center-of-gravity triom capability are summarized. Wind-tunnel tests were conducted at Mach numbers ranging from 0.25 to 20.3 to determine the most effective aerodynamic modifications. Heat transfer and system design studies determined the impact of the modifications on the thermal protection system and structural weight of the vehicle. The most effective modifications were in-fillet canards or a forward extension of the existing forward wing fillet.

Scallion, W. I.↗
NASA NTRS1984

Demonstration of relaxed static stability on a commercial transport

Increasing jet aircraft fuel costs from 25 percent to nearly 60 percent of the aircraft direct operating costs have led to a heavy emphasis on the development of transport aircraft with significantly improved aerodynamic performance. The application of the concept of relaxed static stability (RSS) and the utilization of an active control stability augmentation system make it possible to design an aircraft with reduced aerodynamic trim drag due to a farther-aft cg balance. Reduced aerodynamic parasite drag and lower structural weight due to a smaller horizontal tail surface can also be obtained. The application of RSS has been studied under a NASA-sponsored program to determine ways of improving the energy efficiency in current and future transport aircraft. Attention is given to a near-term pitch active control system, an advanced pitch active control system, and an operational overview.

Rising, J. J.↗