Search NASA⌕ Search

SEARCH · Search NASA

Results for “Scattering Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

The influence of irregular terrain on infrasonic propagation in the troposphere

The relations describing the reflection of three-dimensional acoustic ray paths impinging on a non-flat surface are derived and used to approximate the propagation of infrasonic signals over irregular terrain in the geometric limit. The influence of non-flat ground is strongest for those paths that reflect off the surface multiple times, such as those in the tropospheric waveguide; however, notable differences in source and receiver elevations for stratospheric and thermospheric paths can produce notable differences in travel times and arrival amplitudes. The interaction of ray paths with topographical features is investigated using a simple hill to demonstrate the impact of topography on propagation within an azimuthal plane, as well as cases in which the ground surface interaction deflects the path out of the azimuthal plane. Finally, broadband waveform predictions are compared with observations for an event in the western U.S., and a statistical analysis of scattering losses due to interaction with topography in the limit of geometric acoustics is used to improve the agreement between predicted and observed infrasonic signals.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Understanding Solution State Conformation and Aggregate Structure of Conjugated Polymers via Small Angle X-ray Scattering

Donor-acceptor (D-A) conjugated polymers are high-performance organic electronic materials that exhibit complex aggregation behavior. Understanding the solution state conformation and aggregation of conjugated polymers is crucial for controlling morphology during thin-film deposition and the subsequent electronic performance. However, a precise multiscale structure of solution state aggregates is lacking. Here, we present an in-depth small-angle X-ray scattering (SAXS) analysis of the solution state structure of an isoindigo-bithiophene-based D-A polymer (PII-2T) in chlorobenzene and decane as our primary system. Modeling the system as a combination of hierarchical fibrillar aggregates mixed with dispersed polymers, we extract information about conformation and multiscale aggregation and also clarify the physical origin of features often observed but unaddressed or misinterpreted in small-angle scattering patterns of conjugated polymers. The persistence length of the D-A polymer extracted from SAXS agrees well with a theoretical model based on the dihedral potentials. Additionally, we show that the broad high q structure factor peak seen in scattering profiles can be attributed to lamellar stacking occurring within the fibril aggregates and that the low q aggregate scattering is strongly influenced by the polymer molecular weight. Overall, the SAXS profiles of D-A polymers in general exhibit a sensitive dependence on the co-existence of fibrillar aggregate and dispersed polymer chain populations. We corroborate our findings from SAXS with electron microscopy of freeze-dried samples for direct imaging of fibrillar aggregates. Finally, we demonstrate the generality of our approach by fitting the scattering profiles of a variety of D-A polymers based on thieno-isoindigo (PTII-2T), diketopyrrolopyrrole (DPP2T-TT, DPP-BTZ, PDPP2FT-C- 16 ), naphthalenediimide (P(NDI2OD-T2)), and a conjugated block copolymer P3HT-b-DPPT-T. The results presented here establish a picture of the D-A polymer solution state structure and provide a general method of interpreting and analyzing their scattering profiles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Evolution of Efimov states

The Efimov phenomenon manifests itself as an emergent discrete scaling symmetry in the quantum three-body problem. In the unitarity limit, it leads to an infinite tower of three-body bound states with energies forming a geometric sequence. Here in this work, we study the evolution of these so-called Efimov states using relativistic scattering theory. We identify them as poles of the three-particle S matrix and trace their trajectories in the complex energy plane as they evolve from virtual states through bound states to resonances. We dial the scattering parameters toward the unitarity limit and observe the emergence of the universal scaling of energies and couplings - a behavior known from the non-relativistic case. Interestingly, we find that Efimov resonances follow unusual, cyclic trajectories accumulating at the three-body threshold and then disappear at some values of the two-body scattering length. We propose a partial resolution to this ?missing states? problem.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Uranium Carbide and Uranium-Metal Thermal Scattering Law Evaluations and Cross Sections [Slides]

New Uranium Carbide and Uranium Metal evaluations have been developed using the FLASSH platform. Ab initio LD/MD models converged electronic, magnetic, and dynamical properties and demonstrate good agreement with experimental data. Thermal scattering cross sections generate inelastic and elastic thermal neutron scattering libraries in FLASSH . New TSL evaluations occurred in the production of ENDF File 7 data for Uranium Carbide and Uranium Metal submitted to NNDC for ENDF/B-VIII.1 release.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1993

An x ray scatter approach for non-destructive chemical analysis of low atomic numbered elements

A non-destructive x-ray scatter (XRS) approach has been developed, along with a rapid atomic scatter algorithm for the detection and analysis of low atomic-numbered elements in solids, powders, and liquids. The present method of energy dispersive x-ray fluorescence spectroscopy (EDXRF) makes the analysis of light elements (i.e., less than sodium; less than 11) extremely difficult. Detection and measurement become progressively worse as atomic numbers become smaller, due to a competing process called 'Auger Emission', which reduces fluorescent intensity, coupled with the high mass absorption coefficients exhibited by low energy x-rays, the detection and determination of low atomic-numbered elements by x-ray spectrometry is limited. However, an indirect approach based on the intensity ratio of Compton and Rayleigh scattered has been used to define light element components in alloys, plastics and other materials. This XRS technique provides qualitative and quantitative information about the overall constituents of a variety of samples.

Ross, H. Richard↗
DOE OSTI2025

Nanoscale structural evolution and phase transformation of geopolymers: In situ SAXS/WAXS investigation under uniaxial tension at elevated temperatures

This investigation delves into the degradation mechanisms of high-density polyethylene geomembranes (PE GMXs) under a spectrum of conditions, replicating real-world scenarios within a rigorously controlled laboratory setting. The treatment protocols applied induced a notable increase in the crystallinity of the treated specimens relative to the untreated controls. Small-angle x-ray scattering (SAXS) analysis identified an initial long period (interlamellar distance) of 16.9 nm for the untreated polymer, which expanded by 19.5% at a strain of 16.7 percent. Conversely, the treated PE GMXs exhibited a more gradual elongation of the long period, with an increase of merely 10.6% at a strain of 23.3 percent. At an elevated temperature of 65°C, both samples exhibited pronounced strain hardening, with the treated PE GMXs demonstrating superior stability even at a strain of 150 percent. Wide-angle x-ray scattering (WAXS) experiments corroborated these observations, revealing that the diffraction patterns of the untreated PE remained stable up to a strain of 16.7%, whereas those of the treated PE remained distinct up to a strain of 46.1 percent. Scanning electron microscopy (SEM) images substantiated the formation of a shish–kebab structure in the treated samples. The study concludes that the geopolymer underwent oxidation and material degradation as a result of the chemical and mechanical treatments, transitioning to a more crystalline state and concomitantly losing its initial elasticity.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Synthesis and Characterization of Pd-based Nanomaterials

Bimetallic nanoparticles (BNPs) consist of two different types of metals or alloys that are bonded together. Unique properties such as optical, electronic, thermal, and catalytic effects differ for each type of BNP. Important BNPs range from Au-Pd, Ag- Pt, Au-Pt, and Ag-Ni. Pd bimetallic nanoparticles are of interest due to their many applications such as catalysis and sensing. Bimetallic catalysts have increase reaction rates and have improved catalyst stability through the geometry and ligand distribution. Pd nanoparticles are considered to be a strong catalyst due to their high activity at low temperatures and high tolerance to moisture. The catalytic properties of bimetallic nanoparticles depend on the structural properties such as size and shape. Core-shell, hollow structure, and multi-shell alloy are three possible structures nanoparticles can form as bimetallic catalysts. BNPs can be synthesized through different methods to control the size, shape, and structure. To obtain different morphologies, a variety of methods can be performed. Different methods can range from the usage of the glancing angle deposition (GLAD) to the galvanic replacement reaction, but the methods all depend on the properties of the metals. The galvanic displacement reaction was the method used to obtain Pd-based nanoparticles. This reaction is best know for obtaining hollow shaped NPs. To determine what redox process was preformed, the activity series of metals was used. From the activity series of metals, silver (Ag) was selected to preform Pd-based nanoparticles. Objectives: Synthesize Ag nanoparticles and Ag-Pd nanoparticles to understand the morphology. Characterize the synthesized nanoparticles using scanning electron microscopy (SEM), phase analysis light scattering (PALS), dynamic light scattering (DLS), energy dispersive X-ray spectroscopy (EDS), and UV-Vis spectroscopy. Results: In the UV-Vis spectrum, the Ag-Pd bimetallic NP's plasmon band decreased as the volume of palladium increased. The surface charge increases as the concentration of palladium increases. The Pd{sup 2+} ions interact with the sodium citrate surface, and decrease the negative charge. Conclusion: Ag-Pd nanoparticles were successfully created and stabilized with sodium citrate. The addition of Pd decreased the prominent plasmon band of the Ag nanoparticles. The SEM analysis showed that Ag nanoparticles had a well-defined structure, while the Ag-Pd nanoparticles showed hollow and rough structure. The EDX analysis confirmed the presence of silver and palladium. This material can be used in many industrial and research fields such as organic synthesis, fuel cells, and environmental sensing and remediation.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1983

Experimental comparison of icing cloud instruments

Icing cloud instruments were tested in the spray cloud Icing Research Tunnel (IRT) in order to determine their relative accuracy and their limitations over a broad range of conditions. It was found that the average of the readings from each of the liquid water content (LWC) instruments tested agreed closely with each other and with the IRT calibration; but all have a data scatter (+ or - one standard deviation) of about + or - 20 percent. The effect of this + or - 20 percent uncertainty is probably acceptable in aero-penalty and deicer experiments. Existing laser spectrometers proved to be too inaccurate for LWC measurements. The error due to water runoff was the same for all ice accretion LWC instruments. Any given laser spectrometer proved to be highly repeatable in its indications of volume median drop size (DVM), LWC and drop size distribution. However, there was a significant disagreement between different spectrometers of the same model, even after careful standard calibration and data analysis. The scatter about the mean of the DVM data from five Axial Scattering Spectrometer Probes was + or - 20 percent (+ or - one standard deviation) and the average was 20 percent higher than the old IRT calibration. The + or - 20 percent uncertainty in DVM can cause an unacceptable variation in the drag coefficient of an airfoil with ice; however, the variation in a deicer performance test may be acceptable.

Olsen, W.↗
NASA NTRS1986

Analysis and measurement of electromagnetic scattering by pyramidal and wedge absorbers

By modifying the reflection coefficients in the Uniform Geometrical Theory of Diffraction a solution that approximates the scattering from a dielectric wedge is found. This solution agrees closely with the exact solution of Rawlins which is only valid for a few minor cases. This modification is then applied to the corner diffraction coefficient and combined with an equivalent current and geometrical optics solutions to model scattering from pyramid and wedge absorbers. Measured results from 12 inch pyramid absorbers from 2 to 18 GHz are compared to calculations assuming the returns add incoherently and assuming the returns add coherently. The measured results tend to be between the two curves. Measured results from the 8 inch wedge absorber are also compared to calculations with the return being dominated by the wedge diffraction. The procedures for measuring and specifying absorber performance are discussed and calibration equations are derived to calculate a reflection coefficient or a reflectivity using a reference sphere. Shaping changes to the present absorber designs are introduced to improve performance based on both high and low frequency analysis. Some prototypes were built and tested.

Dewitt, B. T.↗
NASA NTRS2013

Assessment of Error in Aerosol Optical Depth Measured by AERONET Due to Aerosol Forward Scattering

We present an analysis of the effect of aerosol forward scattering on the accuracy of aerosol optical depth (AOD) measured by CIMEL Sun photometers. The effect is quantified in terms of AOD and solar zenith angle using radiative transfer modeling. The analysis is based on aerosol size distributions derived from multi-year climatologies of AERONET aerosol retrievals. The study shows that the modeled error is lower than AOD calibration uncertainty (0.01) for the vast majority of AERONET level 2 observations, ~99.53%. Only ~0.47% of the AERONET database corresponding mostly to dust aerosol with high AOD and low solar elevations has larger biases. We also show that observations with extreme reductions in direct solar irradiance do not contribute to level 2 AOD due to low Sun photometer digital counts below a quality control cutoff threshold.

AERONET↗
DOE OSTI2022

TSL Nuclear Fuel Evaluations and Capabilities at NC State University [Slides]

This presentation discusses the purpose of this project which is to provide thermal scattering law (TSL) and cross section data to support advanced reactor modeling and criticality safety. The presentation also examines modeling and simulations, evaluation updates, and benchmark applications in connection with the project. In summation, new and updated uranium fuel evaluations have been submitted to the ENDF/B libraries. These include vital fuel materials U-metal, UC, UN, and UO 2 .

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Shear wave propagation in a liquid crystal: An inelastic X-ray scattering study

For this work, we investigated the spectrum of density fluctuations of a liquid crystal, CB7CB, in two different orientations by using high-resolution inelastic x-ray scattering. Our analysis, based on Bayesian principles, revealed that high-frequency collective excitations propagate through this mesoscale-ordered sample in a peculiar manner that lies somewhere between those observed in liquids and crystalline systems. Interestingly, when we probed longer length scales, a more pronounced solid-like response emerged. This was mainly characterized by anomalously sharp inelastic excitations and the onset of shear mode propagation. Comparison with previous x-ray diffraction results suggests a correlation between the observed behavior and the mesogen arrangement.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Measurement of Kinetic-Scale Current Filamentation Dynamics and Associated Magnetic Fields in Interpenetrating Plasmas

Here, we present the first local, quantitative measurements of ion current filamentation and magnetic field amplification in interpenetrating plasmas, characterizing the dynamics of the ion Weibel instability. The interaction of a pair of laser-generated, counterpropagating, collisionless, supersonic plasma flows is probed using optical Thomson scattering (TS). Analysis of the TS ion-feature revealed anticorrelated modulations in the density of the two ion streams at the spatial scale of the ion skin depth c/ω pi = 120 μm, and a correlated modulation in the plasma current. The inferred current profile implies a magnetic field amplitude ~30 ± 6 T , corresponding to ~1% of the flow kinetic energy, indicating that magnetic trapping is the dominant saturation mechanism.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1992

Analytical multiple scattering correction to the Mie theory: Application to the analysis of the lidar signal

The contribution of the multiple scattering to the lidar signal is dependent on the optical depth tau. Therefore, the radar analysis, based on the assumption that the multiple scattering can be neglected is limited to cases characterized by low values of the optical depth (tau less than or equal to 0.1) and hence it exclude scattering from most clouds. Moreover, all inversion methods relating lidar signal to number densities and particle size must be modified since the multiple scattering affects the direct analysis. The essential requests of a realistic model for lidar measurements which include the multiple scattering and which can be applied to practical situations follow. (1) Requested are not only a correction term or a rough approximation describing results of a certain experiment, but a general theory of multiple scattering tying together the relevant physical parameter we seek to measure. (2) An analytical generalization of the lidar equation which can be applied in the case of a realistic aerosol is requested. A pure analytical formulation is important in order to avoid the convergency and stability problems which, in the case of numerical approach, are due to the large number of events that have to be taken into account in the presence of large depth and/or a strong experimental noise.

Flesia, C.↗
NASA NTRS1971

Probing atmospheric water vapor profiles via multiple scattering of electromagnetic waves

A theoretical analysis on the multiple scattering of electromagnetic waves propagating in a finite inhomogeneous medium is presented and applied to the study of wave propagation in a clear atmosphere (fine weather conditions). It is shown that the analysis offers a method of synthesizing the water vapor density profile in a clear atmosphere by measuring the resultant reflections from the density profile at several different frequencies. It is also shown that the resultant reflection emerges as the consequence of multiple scattering of partial reflections from various parts of the inhomogeneous medium. The solutions of the multiple scattering approach are shown to be more accurate than those of the WKB approach, which neglects the multiple scattering effects.

Tang, C. C. H.↗
DOE OSTI2023

Toward Stable Cycling of a Cost-Effective Cation-Disordered Rocksalt Cathode via Fluorination

The recently developed Li-excess cation-disordered rock salts (DRXs) exhibit an excellent chemical diversity for the development of alternative Co/Ni-free high-energy cathodes. Herein, the synthesis of a highly fluorinated DRX cathode, Li 1.2 Mn 0.6 Ti 0.2 O 1.8 F 0.2 , based on cost-effective and earth-abundant transition metals, via a solid-state reaction, is reported. The fluorinated DRX cathode using ammonium fluoride precursor exhibits more uniform particle size and delivers a specific discharge capacity of 233 mAh g -1 and specific energy of 754 Wh kg -1 , with 206 mAh g -1 retained after 200 cycles. Further, the combined synchrotron X-ray absorption spectroscopy and resonant inelastic X-ray scattering spectroscopy analysis reveals that the remarkable cycling performance is attributed to the high fluorination and thus enhanced Mn content, enabling the utilization of more Mn redox than the oxide analog. This study demonstrates a great promise to develop next-generation cost-effective DRX cathodes with enhanced capacity retention for high-energy Li-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

Dynamic Excitonic Beam Switching with Atomically‐Thin Binary Blazed Gratings

Abstract Beam steering metasurfaces are ultra‐compact optical coatings that offer on‐demand redirection of optical power to specific diffraction orders. To achieve this, spatial gradients are commonly introduced in the phase of light scattered by plasmon or Mie resonant nanoparticles within the metasurface grating's unit cell. However, these phase gradients are oftentimes difficult to tune post‐fabrication. Recently, excitons in monolayer 2D semiconductors have emerged as a new metasurface building block, due to their strong and electrically‐tunable resonant light‐matter interaction. These 2D excitonic metasurfaces offer the tantalizing prospect of beam switching within a single monolayer. Here, it is demonstrated how the 2D analog of binary blazed gratings enables such beam switching by mere nanopatterning of a large monolayer WS 2 , even though nanoscale ribbons of WS 2 do not support geometrical resonances. By introducing a gradient in the nanoribbon width within the metasurface unit cell, an amplitude gradient combined with a small phase gradient in the scattered fields results in asymmetric diffraction efficiencies. Using a scattered‐field analysis, it is shown that these gradients can be further engineered via interference effects with the substrate reflection. Finally, the electrical tunability of the exciton resonance is leveraged to achieve selective and dynamic beam switching with an atomically‐thin metasurface.

Guarneri, Ludovica [Van der Waals‐Zeeman Institute↗
DOE OSTI2021

Purification of Propylene and Ethylene by a Robust Metal–Organic Framework Mediated by Host–Guest Interactions

Industrial purification of propylene and ethylene requires cryogenic distillation and selective hydrogenation over palladium catalysts to remove propane, ethane and/or trace amounts of acetylene. Here, we report the excellent separation of equimolar mixtures of propylene/propane and ethylene/ethane, and of a 1/100 mixture of acetylene/ethylene by a highly robust microporous material, MFM-520, under dynamic conditions. In situ synchrotron single crystal X-ray diffraction, inelastic neutron scattering and analysis of adsorption thermodynamic parameters reveal that a series of synergistic host-guest interactions involving hydrogen bonding and π⋯π stacking interactions underpin the cooperative binding of alkenes within the pore. Notably, the optimal pore geometry of the material enables selective accommodation of acetylene. The practical potential of this porous material has been demonstrated by fabricating mixed-matrix membranes comprising MFM-520, Matrimid and PIM-1, and these exhibit not only a high permeability for propylene (≈1984 Barrer), but also a separation factor of 7.8 for an equimolar mixture of propylene/propane at 298 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗