Search NASA⌕ Search

SEARCH · Search NASA

Results for “Separation of variables”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

Contactless conductivity detector for microchip capillary electrophoresis

A microfabricated electrophoresis chip with an integrated contactless conductivity detection system is described. The new contactless conductivity microchip detector is based on placing two planar sensing aluminum film electrodes on the outer side of a poly(methyl methacrylate) (PMMA) microchip (without contacting the solution) and measuring the impedance of the solution in the separation channel. The contactless route obviates problems (e.g., fouling, unwanted reactions) associated with the electrode-solution contact, offers isolation of the detection system from high separation fields, does not compromise the separation efficiency, and greatly simplifies the detector fabrication. Relevant experimental variables, such as the frequency and amplitude of the applied ac voltage or the separation voltage, were examined and optimized. The detector performance was illustrated by the separation of potassium, sodium, barium, and lithium cations and the chloride, sulfate, fluoride, acetate, and phosphate anions. The response was linear (over the 20 microM-7 mM range) and reproducible (RSD = 3.4-4.9%; n = 10), with detection limits of 2.8 and 6.4 microM (for potassium and chloride, respectively). The advantages associated with the contactless conductivity detection, along with the low cost of the integrated PMMA chip/detection system, should enhance the power and scope of microfluidic analytical devices.

NASA Center JPL↗
DOE OSTI2021

Disjunctive linear separation conditions and mixed-integer formulations for aircraft conflict resolution

In this paper, we address the aircraft conflict resolution problem in air traffic control. We introduce new mixed-integer programming formulations for aircraft conflict resolution with speed, heading and altitude control which are based on disjunctive linear separation conditions. We first examine the two-dimensional aircraft conflict resolution problem with speed and heading control represented as continuous decision variables. We show that the proposed disjunctive linear separation conditions are equivalent to the classical nonlinear conditions for aircraft separation. Further, we characterise conflict-free trajectories based on aircraft velocity bounds and propose a simple pre-processing algorithm to identify aircraft pairs which are either always conflict-free, or which cannot be separated using speed and heading control only. We then incorporate altitude control and propose a lexicographic optimisation formulation that aims to minimise the number of flight level changes before resolving outstanding conflicts via two-dimensional velocity control. The proposed mixed-integer programming formulations are nonconvex, and we propose convex relaxations, decomposition methods and constraint generation algorithms to solve the two-dimensional and lexicographic optimisation formulations to guaranteed optimality. Numerical experiments on four types of conflict resolution benchmarking instances are conducted to test the performance of the proposed mixed-integer formulations. Further, the proposed method is compared against two benchmarks based on state-of-the-art approaches for the aircraft conflict resolution problem. Our numerical results show that the proposed method largely outperforms both benchmarks in terms of runtime and is able to solve significantly more instances to global optimality.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Non-destructive analysis of swelling in the EMPIrE fuel test

The European Mini-Plate Irradiation Experiment (EMPIrE) was designed to support the development and testing of a coated uranium-molybdenum (U-Mo) dispersion fuel for the conversion of select high-performance research reactors (HPRRs) to utilize low-enriched uranium (LEU). To aid in the development of the coated fuel form, the EMPIrE test included several plate designs and irradiated them in the Idaho National Laboratory (INL) Advanced Test Reactor (ATR) at a high meat power density (~21 kW/cm 3 ) and to high fuel particle fission densities (~6.4 × 10 21 fissions/cm 3 ). These conditions mimic the bounding conditions of the BR-2 reactor in Belgium, where a concurrent irradiation experiment was performed, and exceed those previously explored in dispersion U-Mo fuel plates. A local fuel swelling analysis, as determined through high-fidelity, post-irradiation mini-plate profilometry, was used along with statistical methods to non-destructively evaluate the overall performance and separate the effects of convoluted fabrication variables. While some effects observed with this non-destructive analysis were subtle, others had more significant, and possibly competing, effects on the fuel swelling behavior. In closing, these observations will be examined further with destructive examinations to more fully assess them as the fuel design is developed and qualified.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Magnetism in the axion insulator candidate Eu 5 In 2 Sb 6

Eu 5 In 2 Sb 6 is a member of a family of orthorhombic nonsymmorphic rare-earth intermetallics that combines large localized magnetic moments and itinerant exchange with a low carrier density and perpendicular glide planes. This may result in special topological crystalline (wallpaper fermion) or axion insulating phases. Recent studies of Eu 5 In 2 Sb 6 single crystals have revealed colossal negative magnetoresistance and multiple magnetic phase transitions. Here, we clarify this ordering process using neutron scattering, resonant elastic x-ray scattering, muon spin-rotation, and magnetometry. The nonsymmorphic and multisite character of Eu 5 In 2 Sb 6 results in coplanar noncollinear magnetic structures with an Ising-like net magnetization along the a axis. A reordering transition, attributable to competing ferro- and antiferromagnetic couplings, manifests as the onset of a second commensurate Fourier component. In the absence of spatially resolved probes, the experimental evidence for this low-temperature state can be interpreted either as an unusual double- q structure or in a phase separation scenario. The net magnetization produces variable anisotropic hysteretic effects which also couple to charge transport. The implied potential for functional domain physics and topological transport suggests that this structural family may be a promising platform to implement concepts of topological antiferromagnetic spintronics. Published by the American Physical Society 2024

Rahn, M. C. (ORCID:0000000174038288)↗
DOE OSTI2024

Poleward Migration of the Latitude of Maximum Tropical Cyclone Intensity—Forced or Natural?

Abstract Past studies have shown a significant observed poleward trend in the latitude at which tropical cyclones reach their lifetime maximum intensity (LMI), especially in the northwest Pacific basin. Given the brevity of the historical record, it remains difficult to separate the forced trend from internal variability of the climate system. A recently developed tropical cyclone downscaling model is used to downscale the Community Earth System Model, version 2 (CESM2), preindustrial control simulation. It is found that the observed trend in the latitude at which tropical cyclones reach their LMI in the northwest Pacific is very unlikely to be caused by internal variability. The same downscaling model is then used to downscale CESM2 simulations under historical forcing. The resulting trend distribution shows a significant poleward migration of tropical cyclone LMI even after regressing out both natural variability and the part of the forced warming pattern that projects onto natural variability. The results indicate that the observed poleward migration of the latitude at which tropical cyclones reach their LMI in the northwest Pacific basin is likely to be, at least in part, forced. However, the magnitude of the projected poleward trend in climate models can be significantly modulated by the simulated spatial pattern of ocean warming. This highlights how discrepancies between models and observations, with regard to projected changes to the equatorial zonal sea surface temperature gradient under anthropogenic forcing, can lead to large uncertainties in projected changes to the LMI latitude of tropical cyclones. Significance Statement Observations in the northwest Pacific basin show that the latitude at which tropical cyclones are at their most intense has been trending northward in the recent half century. These changes are important since tropical cyclones could bring hazardous weather to coastal areas that are poorly equipped to handle them. Here, we show that natural variations in Earth’s climate are very unlikely to explain the observed poleward trend in the latitude that tropical cyclone reach their maximum intensity. We find that it is much more likely that the observed trend is forced by human-related emissions, though the spatial pattern of warming in response to greenhouse emissions can have significant impacts on the magnitude of the trend.

Lin, Jonathan↗
DOE OSTI2025

Real-Time Characterization of Salt Aerosols Generated from Static and Sparged Molten Salt

The formation of radionuclide-bearing aerosols in the respirable size range has the potential to significantly influence offsite dose consequences and is, therefore, an important consideration in nuclear facility safety assessments. Molten salt reactor (MSR) developers will likely need to demonstrate an understanding of the conditions under which radionuclide-bearing aerosols may be generated from their reactor under normal operating and accident conditions, as well as the characteristics and transport behavior of these aerosols, to demonstrate to the U.S. Nuclear Regulatory Commission (NRC) that the facility can be operated safely. Recent reviews of the literature identified a lack of experimental data describing the mechanisms of formation and properties (size, concentration, and composition) of salt aerosol particles that are produced from molten salts. Experiments that identify the conditions that lead to radionuclide-bearing salt aerosol releases and quantify the characteristics of salt aerosols formed by different mechanisms are high-priority needs to support MSR licensing. This report describes tests that were conducted within the Argonne Salt Aerosol Test Stand (a sealed vessel and measurement system) to generate salt aerosols from static and sparged molten salts and measure their size and concentration in real-time. The results provide insight into salt aerosol formation by the vapor condensation and bubble bursting mechanisms and inform the potential radiological consequences of aerosol formation from molten fuel salt. Videos of the salt surface were taken during salt sparge tests to observe surface bubble behavior. The data in this report can be used to develop mechanistic source term and accident progression models for MSRs. The real-time salt aerosol characterization technique used in this study will be employed in future integral effects tests that are conducted at an engineering scale to simulate realistic MSR accidents and in future separate effects tests to address additional variables that may impact salt aerosol characteristics (e.g., presence of fission products in salt and humidity in atmosphere).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS1975

Computer user's guide for a chemically reacting viscous shock-layer program

A description is given of the computer code for predicting viscous shock-layer flows over nonanalytic blunt bodies (Program VISLNABB) for hypersonic, low Reynolds number flows. Four specific and one general body geometries are considered. In addition to sphere-cones, cylinder wedges and geometries defined in tabular form, options for hyperboloids and paraboloids are included. Details of the theory and results are included in a separate engineering report. The program, subroutines, variables in common, and input and output data are described. Listings of the program code, output data for a sample case, and the input data for this sample case are included.

Miner, E. W.↗
NASA NTRS1974

Measurement of atmospheric turbulence strength at high altitude with balloon-borne temperature sensors

A technique to measure a vertical profile of the optical strength of turbulence employs the measurement of a root mean square temperature difference between two microthermal probes carried aloft as part of a balloon payload. Microthermal fluctuations provide a measure for the density fluctuations of turbulence. Examination of recorded profiles of refractive-index structure coefficients reveals a turbulence structure which is organized into multiple, thin groupings of strong turbulence separated by relatively quiescent intervals of variable length.

Bufton, J. L.↗
NASA NTRS1976

The characteristics of the planned National Transonic Facility

The National Transonic Facility is a high Reynolds number transonic wind tunnel designed to satisfy the research and development needs of NASA, DOD, and industry. The facility design incorporates the cryogenic approach to achieving high Reynolds numbers with manageable model loads. By using temperature as a test variable, a unique capability to clearly separate aeroelastic, Reynolds number, and Mach number effects will be possible. This capability will open new horizons in transonic aerodynamic research. The tunnel design including unique features and operating envelopes is described. A brief overview of the general operating arrangement and the schedule for facility construction is presented.

Mckinney, L. W.↗
NASA NTRS1979

Off-axis impact of unidirectional composites with cracks: Dynamic stress intensification

The dynamic response of unidirectional composites under off axis (angle loading) impact is analyzed by assuming that the composite contains an initial flaw in the matrix material. The analytical method utilizes Fourier transform for the space variable and Laplace transform for the time variable. The off axis impact is separated into two parts, one being symmetric and the other skew-symmetric with reference to the crack plane. Transient boundary conditions of normal and shear tractions are applied to a crack embedded in the matrix of the unidirectional composite. The two boundary conditions are solved independently and the results superimposed. Mathematically, these conditions reduce the problem to a system of dual integral equations which are solved in the Laplace transform plane for the transformation of the dynamic stress intensity factor. The time inversion is carried out numerically for various combinations of the material properties of the composite and the results are displayed graphically.

Sih, G. C.↗
NASA NTRS1981

Theory of satellite orbit-orbit resonance

On the basis of the strong mathematical and physical parallels between orbit-orbit and spin-orbit resonances, the dynamics of mutual orbit perturbations between two satellites about a massive planet are examined, exploiting an approach previously adopted in the study of spin-orbit coupling. Resonances are found to exist when the mean orbital periods are commensurable with respect to some rotating axis, which condition also involves the apsidal and nodal motions of both satellites. In any resonant state the satellites are effectively trapped in separate potential wells, and a single variable is found to describe the simultaneous librations of both satellites. The librations in longitude are 180 deg out-of-phase, with fixed amplitude ratio that depends only on their relative masses and semimajor axes. The theory is applicable to Saturn's resonant pairs Titan-Hyperion and Mimas-Tethys, and in these cases the calculated libration periods are in reasonably good agreement with the observed periods.

Blitzer, L.↗
NASA NTRS1985

Hand-Held Electronic Gap-Measuring Tools

Repetitive measurements simplified by tool based on LVDT operation. With fingers in open position, Gap-measuring tool rests on digital readout instrument. With fingers inserted in gap, separation alters inductance of linear variable-differential transformer in plastic handle. Originally developed for measuring gaps between surface tiles of Space Shuttle orbiter, tool reduces measurement time from 20 minutes per tile to 2 minutes. Also reduces possibility of damage to tiles during measurement. Tool has potential applications in mass production; helps ensure proper gap dimensions in assembly of refrigerator and car doors and also used to measure dimensions of components and to verify positional accuracy of components during progressive assembly operations.

Sugg, F. E.↗
NASA NTRS1985

On the ultraviolet iron spectrum of pre-white dwarfs

Numerous lines of Fe V, Fe VI, and Fe VII have been detected in high-resolution IUE spectra of two central stars and a number of very hot subdwarfs. The strengths of these lines vary widely from star to star, suggesting that the abundance of iron in the atmospheres of the immediate progenitors of white dwarfs is strongly variable. A possible explanation is elemental separation by gravity and radiation pressure.

Schoenberner, D.↗
NASA NTRS1985

Extracting sea ice data from satellite SAR imagery

With the prospect operational satellite SAR's by the end of the decade, there is a clear need to develop automated algorithms for the extraction of geophysical data about sea ice from high resolution radar imagery. To this end, techniques were developed for distinguishing ice from open water and for resolving the details of deformation within areas 100 km square imaged by SEASAT SAR. The classification of ice and open water is based on the creation of two bands of lower resolution image data: local average brightness, and the local variance of brightness. In the space of these two variables, ice and open water are separated into two distinct clusters. The deformation is found on a 3.4 km mesh by local cross-correlations of the brightness. Comparison with manually determined deformation shows room for improvement in regions of high deformation by using smaller areas for cross-correlation. Th concentration and deformation data are used together to determine localized regions of the scene where open water is produced or lost.

Fily, M.↗
NASA NTRS1991

A computer code for multiphase all-speed transient flows in complex geometries. MAST version 1.0

The operation of the MAST code, which computes transient solutions to the multiphase flow equations applicable to all-speed flows, is described. Two-phase flows are formulated based on the Eulerian-Lagrange scheme in which the continuous phase is described by the Navier-Stokes equation (or Reynolds equations for turbulent flows). Dispersed phase is formulated by a Lagrangian tracking scheme. The numerical solution algorithms utilized for fluid flows is a newly developed pressure-implicit algorithm based on the operator-splitting technique in generalized nonorthogonal coordinates. This operator split allows separate operation on each of the variable fields to handle pressure-velocity coupling. The obtained pressure correction equation has the hyperbolic nature and is effective for Mach numbers ranging from the incompressible limit to supersonic flow regimes. The present code adopts a nonstaggered grid arrangement; thus, the velocity components and other dependent variables are collocated at the same grid. A sequence of benchmark-quality problems, including incompressible, subsonic, transonic, supersonic, gas-droplet two-phase flows, as well as spray-combustion problems, were performed to demonstrate the robustness and accuracy of the present code.

Chen, C. P.↗
NASA NTRS2006

Swift Observations Of High-z Radio-loud Quasars Detected With Bat

We present follow-up Swift observations of 4 high-z radio-loud quasars detected with the BAT during the 15-month survey in 15-150 keV. The 0.5-8-keV spectra are best fitted either with a power law with no excess absorption over the Galactic value (0212+735, 0836+710, 2149--307 in higher state) or by a downward-curved broken power law model (0537--286, 2149--307 in lower state). The BAT spectra integrated over the whole 15 months of the survey are fitted with a single power law, with a range of spectral slopes, Gamma=l.3-2.3. Comparison with previous SAX observations shows that there is a trend for the 15-150-keV continuum to soften with fading intensity; on the contrary, little or no spectral variations are observed at medium-hard X-rays. This may suggest either/both dramatic variability above 10-keV, or/and two separate spectral components.

Sambruna, Rita M.↗
NASA NTRS1952

Time Variation of the Distance Separating Bomb and Dive Bomber Subsequent to Bomb Release

A study has been made of the variation of the distance separating bomb and aircraft with time after release as applied to dive-bombing operations, Separation distances determined from this study are presented in terms of two variables only, dive angle and maximum airplane accelerometer reading; the values of separation distance include the effects of delay in initiation of the pull-out and lag in attainment of the maximum normal acceleration.Contains analysis and calculations of the separation distances between bomb and dive bomber following bomb release, Separation distances as determined by the dive angle and the maximum airplane accelerometer reading are presented in a single chart.

Mathews, Charles W.↗