Search NASA⌕ Search

SEARCH · Search NASA

Results for “Simplified Simulator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Improved internal short circuit models for thermal runaway simulations in lithium-ion batteries

Thermal runaway (TR) modeling is one of the primary tools that can be used to overcome challenges associated with lithium-ion battery (LIB) safety. Among all LIB accidents that have occurred over the past decade, Internal Short Circuit (ISC) remains the most common trigger mechanism. Many available models in the literature either use a simplified approach to simulate ISC or completely ignore its contribution. The aim of this study is to understand the nature of the heat released for different types of ISC scenarios, including aluminum-anode, anode–cathode, and copper-cathode ISC. We study ISC behavior using a coupled electrochemical–thermal model with an integrated TR chemical kinetics solver built in the COMSOL Multiphysics framework. The time duration of heat release and the magnitude of the peak ISC current are studied as functions of parameters such as the size of the penetrating filament and the capacity of the cell. The numerical results are used to build an empirical model validated against the published experimental TR propagation data. Our model can be successfully used as a viable low-cost substitute in lower order (lumped) TR simulations to enable TR prevention and mitigation.

Singh, Bakhshish Preet (ORCID:0000000264751992)↗

Multiple RANS Scheme for the CFD Simulation of PWR

Though best-estimate system codes have been well established, the assumptions for the simplification of the conservation equations will be invalid when 3D effects play an important role in the object. The inner domain of PWR can create high 3D effects because of the disturbance of mixing vanes and the complex distribution of flow resistance. With the finest mesh to study the flow and heat transfer process of a nuclear reactor, a CFD simulation can give a perfect understanding of the physical processes in a whole reactor. However, more than 10 thousands of subchannels exist in a typical pressurized water reactor (PWR). These subchannels are narrow, comprising complex spacer grids and mixing vanes. The need of both the computational resources and the simulation time is great, which is not good for the simulation efficiency. However, the efficiency is critical for the CFD simulation of a PWR. It is meaningless if the simulation does not end. To improve the efficiency, one approach is to well consider the turbulence model used in a CFD simulation, because some models are complex and require great computing resources and time. On the contrary, some models are simple, but are also suitable to reflect the physical status in a PWR. Furthermore, the effects of the typical structures of PWR should also be clarified. They are closely related to the flow mechanism. The CFD simulation may be simplified by such effects. The objective of this research is to study the flow characteristics affected by the turbulence models and typical structures. The authors then design a scheme based on the regularities of the flow characteristics to improve the efficiency of the CFD simulation for PWR. By this research, we found: 1) The mixing vanes, a typical structure of a PWR, make the anisotropic eddy viscosity cannot be ignored for the region with short distance downstream of this structure; 2) Outside of this region, the RANS models, regardless of whether they are isotropic or anisotropic, can obtain similar results. To improve the simulation efficiency, a CFD scheme is designed by the hybrid application of multiple RANS models (MRANS). In this scheme, the major domain with low anisotropic viscosity uses the turbulence model which requires the least time. The difference is just little in the comparison with a simulation using the anisotropic RANS model for the whole computational domain. The MRANS scheme thus will be significant to improve the efficiency of the CFD simulation for a whole PWR.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Dynamics of flames near the rich-flammability limit of hydrogen-air mixtures

Flames near the rich-flammability limit of hydrogen-air mixtures are studied using a detailed, time-dependent, one-dimensional Lagrangian model. Results from the numerical simulations indicate that a steady burning velocity is not obtained for very rich hydrogen-air mixtures. As the amount of hydrogen is increased, a damped oscillation is observed in the flame and burning velocities, and then, with further increase in the amount of hydrogen, an undamped oscillation with a complex set of frequencies is observed. Simulations with a simplified one-step irreversible chemical reaction do not show these oscillations, suggesting that chemical kinetics plays a strong role in inducing these oscillations. Further analysis shows that the oscillations are due to a competition for H atoms between chain branching and chain-terminating reactions. Simulations of spherically expanding flames suggest that stretch effects (due to curvature) will cause the oscillations to occur in less rich mixtures than that observed for planar flames. The implications of these oscillations on the rich-flammability limit as well as the role of chemical kinetics in creating a fundamental flammability limit is discussed.

Kailasanath, K.↗

Active elastohydrodynamics of vesicles in narrow blind constrictions

Fluid-resistance limited transport of vesicles through narrow constrictions is a recurring theme in many biological and engineering applications. Inspired by the motor-driven movement of soft membrane-bound vesicles into closed neuronal dendritic spines, here we study this problem using a combination of passive three-dimensional simulations and a simplified semianalytical theory for the active transport of vesicles forced through constrictions by molecular motors. We show that the motion of these objects is characterized by two dimensionless quantities related to the geometry and to the strength of forcing relative to the vesicle elasticity. We use numerical simulations to characterize the transit time for a vesicle forced by fluid pressure through a constriction in a channel and find that relative to an open channel, transport into a blind end leads to the formation of a smaller forward-flowing lubrication layer that strongly impedes motion. When the fluid pressure forcing is complemented by forces due to molecular motors that are responsible for vesicle trafficking into dendritic spines, we find that the competition between motor forcing and fluid drag results in multistable dynamics reminiscent of the real system. Our study highlights the role of nonlocal hydrodynamic effects in determining the kinetics of vesicular transport in constricted geometries.

59 BASIC BIOLOGICAL SCIENCES↗

Evaluation of SSME test data reduction methods

Accurate prediction of hardware and flow characteristics within the Space Shuttle Main Engine (SSME) during transient and main-stage operation requires a significant integration of ground test data, flight experience, and computational models. The process of integrating SSME test measurements with physical model predictions is commonly referred to as data reduction. Uncertainties within both test measurements and simplified models of the SSME flow environment compound the data integration problem. The first objective of this effort was to establish an acceptability criterion for data reduction solutions. The second objective of this effort was to investigate the data reduction potential of the ROCETS (Rocket Engine Transient Simulation) simulation platform. A simplified ROCETS model of the SSME was obtained from the MSFC Performance Analysis Branch . This model was examined and tested for physical consistency. Two modules were constructed and added to the ROCETS library to independently check the mass and energy balances of selected engine subsystems including the low pressure fuel turbopump, the high pressure fuel turbopump, the low pressure oxidizer turbopump, the high pressure oxidizer turbopump, the fuel preburner, the oxidizer preburner, the main combustion chamber coolant circuit, and the nozzle coolant circuit. A sensitivity study was then conducted to determine the individual influences of forty-two hardware characteristics on fourteen high pressure region prediction variables as returned by the SSME ROCETS model.

Santi, L. Michael↗

Monte Carlo studies of medium-size telescope designs for the Cherenkov Telescope Array

In this paper, we present studies for optimizing the next generation of ground-based imaging atmospheric Cherenkov telescopes (IACTs). Results focus on mid-sized telescopes (MSTs) for CTA, detecting very high energy gamma rays in the energy range from a few hundred GeV to a few tens of TeV. We describe a novel, flexible detector Monte Carlo package, FAST (FAst Simulation for imaging air cherenkov Telescopes), that we use to simulate different array and telescope designs. The simulation is somewhat simplified to allow for efficient exploration over a large telescope design parameter space. We investigate a wide range of telescope performance parameters including optical resolution, camera pixel size, and light collection area. In order to ensure a comparison of the arrays at their maximum sensitivity, we analyze the simulations with the most sensitive techniques used in the field, such as maximum likelihood template reconstruction and boosted decision trees for background rejection. Choosing telescope design parameters representative of the proposed Davies–Cotton (DC) and Schwarzchild–Couder (SC) MST designs, we compare the performance of the arrays by examining the gamma-ray angular resolution and differential point-source sensitivity. We further investigate the array performance under a wide range of conditions, determining the impact of the number of telescopes, telescope separation, night sky background, and geomagnetic field. We find a 30–40% improvement in the gamma-ray angular resolution at all energies when comparing arrays with an equal number of SC and DC telescopes, significantly enhancing point-source sensitivity in the MST energy range. Finally, we attribute the increase in point-source sensitivity to the improved optical point-spread function and smaller pixel size of the SC telescope design.

42 ENGINEERING↗

Nonlocal suppression of Biermann battery magnetic-field generation for arbitrary atomic numbers and magnetization

The Biermann battery term of magnetohydrodynamics (MHD) generates a magnetic field where electron density gradients and electron temperature gradients are perpendicular to one another. Kinetic simulations and experiments have shown that the rate of magnetic-field generation is lower than Biermann when the electron mean free path becomes comparable to or greater than the temperature gradient scale length, known as the nonlocal regime. We investigate the nonlocal suppression of the Biermann term using simplified Fokker–Planck simulations covering a wide range of parameters. We provide the first fit for nonlocal Biermann suppression that has physically accurate behavior for small and large values of a suitable nonlocality parameter, valid for an arbitrary atomic number, and that includes the effect of magnetization on nonlocality. Lastly, the fit is intended to provide an approximate method to account for reduced magnetic-field generation in MHD codes and theory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Global effects on Ionospheric Weather over the Indian subcontinent at Sunrise and Sunset

Study of Very Low Frequency (VLF) electromagnetic wave is very important for knowing the behavior of the Ionospheric layers due to Sunrise-Sunset, Earthquakes, Solar flares, Solar eclipses and other terrestrial and extra terrestrial radiations. We study the properties of the variation of the VLF signal strength theoretically all over Indian sub-continent. As an example, we concentrate on the VLF signal transmitted by Indian Naval Transmitter VTX at Vijayanarayanam (Latitude 08 deg. 23', Longitude 77 deg. 45') near the southern tip of Indian subcontinent. As has been noticed, several receiving stations placed during the VLF campaign in all over India, the VLF signal strength varies significantly with place and time. To understand the diurnal and seasonal variation of the received signal, a complete knowledge of physics of intensity distribution of the VLF signal is essential. The spatial variation of VLF signal plays an important role in selecting future VLF stations. In the wave-hop theoretical model presented here, horizontally stratified ionospheric layers have been considered. The VLF wave emitted by the transmitter has both the ground wave and the sky wave components. The ground wave attenuates during propagation. The sky wave component experiences reflections by the ionosphere on its way to the receiver and its attenuation depends on the degree of ionization. Intensity variation occurs at a given receiver location for interference among singly and multiply reflected waves. This has been simulated considering some simplified and justifiable assumptions. This spatial variation wave-hop theoretical model developed here has been compared with LWPC code generated results.

79 ASTRONOMY AND ASTROPHYSICS↗

The design of a precision pointing contol system for the Space Infrared Telescope Facility

The design and performance simulation of the Space Infrared Telescope Facility pointing and control system are described. The system design is constrained by such considerations as image stability, maneuver capability, cryogen lifetime, and structural flexibility. The primary design driver is the requirement to rapidly execute small angle reorientations of the telescope's optical axis. The flexibility of the spacecraft was simulated using a simplified multibody model which provided an approximation of the primary bending modes. The rather conventional attitude control system design of PID type with a 0.5 Hz bandwidth was enhanced to meet the small angle maneuver requirements by the use of three techniques: (1) a feedforward loop to improve the time response; (2) torque shaping to minimize structural excitation; and (3) active image stabilization to remove residual pointing error and jitter. Simulation results indicate that the system has the desired performance and can be designed using techniques and hardware well within the state-of-the-art.

Sridhar, B.↗

Numerical simulation of current sheet formation in a quasiseparatrix layer using adaptive mesh refinement

The formation of a thin current sheet in a magnetic quasiseparatrix layer (QSL) is investigated by means of numerical simulation using a simplified ideal, low-{beta}, MHD model. The initial configuration and driving boundary conditions are relevant to phenomena observed in the solar corona and were studied earlier by Aulanier et al. [Astron. Astrophys. 444, 961 (2005)]. In extension to that work, we use the technique of adaptive mesh refinement (AMR) to significantly enhance the local spatial resolution of the current sheet during its formation, which enables us to follow the evolution into a later stage. Our simulations are in good agreement with the results of Aulanier et al. up to the calculated time in that work. In a later phase, we observe a basically unarrested collapse of the sheet to length scales that are more than one order of magnitude smaller than those reported earlier. The current density attains correspondingly larger maximum values within the sheet. During this thinning process, which is finally limited by lack of resolution even in the AMR studies, the current sheet moves upward, following a global expansion of the magnetic structure during the quasistatic evolution. The sheet is locally one-dimensional and the plasma flow in its vicinity, when transformed into a comoving frame, qualitatively resembles a stagnation point flow. In conclusion, our simulations support the idea that extremely high current densities are generated in the vicinities of QSLs as a response to external perturbations, with no sign of saturation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Leveraging regional mesh refinement to simulate future climate projections for California using the Simplified Convection-Permitting E3SM Atmosphere Model Version 0

Abstract. The spatial heterogeneity related to complex topography in California demands high-resolution (< 5 km) modeling, but global convection-permitting climate models are computationally too expensive to run multi-decadal simulations. We developed a 3.25 km California climate modeling framework by leveraging regional mesh refinement (CARRM) using the U.S. Department of Energy (DOE)'s global Simple Cloud-Resolving E3SM Atmosphere Model (SCREAM) version 0. Four 5-year time periods (2015–2020, 2029–2034, 2044–2049, and 2094–2099) were simulated by nudging CARRM outside California to 1° coupled simulation of E3SMv1 under the Shared Socioeconomic Pathways (SSP)5-8.5 future scenario. The 3.25 km grid spacing adds considerable value to the prediction of the California climate changes, including more realistic high temperatures in the Central Valley and much improved spatial distributions of precipitation and snowpack in the Sierra Nevada and coastal stratocumulus. Under the SSP5-8.5 scenario, CARRM simulation predicts widespread warming of 6–10 °C over most of California, a 38 % increase in statewide average 30 d winter–spring precipitation, a near-complete loss of the alpine snowpack, and a sharp reduction in shortwave cloud radiative forcing associated with marine stratocumulus by the end of the 21st century. We note a climatological wet precipitation bias for the CARRM and discuss possible reasons. We conclude that SCREAM RRM is a technically feasible and scientifically valid tool for climate simulations in regions of interest, providing an excellent bridge to global convection-permitting simulations.

58 GEOSCIENCES↗

Magnetic field structure influence on primary electron cusp losses for micro-scale discharges

An experimental effort was used to examine the primary electron loss behavior for micro-scale (≲3 cm diameter) discharges. The experiment uses an electron flood gun source and an axially aligned arrangement of ring-cusps to guide the electrons to a downstream point cusp. Measurements of the electron current collected at the point cusp show an unexpectedly complex loss pattern with azimuthally periodic structures. Additionally, in contrast to conventional theory for cusp losses, the overall radii of the measured collection areas are over an order of magnitude larger than the electron gyroradius. Comparing these results to Monte Carlo particle tracking simulations and a simplified analytical analysis shows that azimuthal asymmetries of the magnetic field far upstream of the collection surface can substantially affect the electron loss structure and overall loss area.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Accelerating CO2 Storage Site Characterization through a New Understanding of Favorable Formation Properties and the Impact of Core-Scale Heterogeneities

CO2 sequestration in deep geologic formations can permanently reduce atmospheric CO2 emissions and help to abate climate change. Target formations must undergo a time- and resource-intensive site evaluation process, assessing storage capacity, environmental safety, and suitability for CO2 trapping via reactive transport models based on data from a limited number of core samples. As such, simulations are often simplified and omit heterogeneities in formation properties that may be significant but are not well understood. To facilitate more rapid site assessment, this work first defines the aquifer properties of favorable storage formations through the analysis of promising and active storage sites. Data show quartz is the most prevalent formation mineral with carbonate minerals, highly reactive with injected CO2, present in over 75% of formations. Porosity and permeability data are highly clustered at 10–30% and 10–1000 mD. Field-scale reactive transport simulations are then constructed and used to analyze CO2 trapping efficiency. The models consider porosity and carbonate mineral heterogeneity as well as the impacts of typical temperature gradients. Simulated sequestration efficiencies are compared to results from a comparable homogenous model to understand the implications of aquifer non-uniformities. The results show a lower sequestration efficiency in the homogeneous model during the injection phase. During the post-injection phase, the homogenization of porosity and carbonate mineralogy results in a higher sequestration efficiency. Incorporating the temperature gradient also increases the sequestration efficiency. Importantly, the maximum deviation between the homogeneous and heterogeneous simulations at the end of the 50-year study period is only ~10%. Larger impacts may be incurred for properties outside the defined, promising ranges suggested here.

Environmental Sciences & Ecology↗

Kinect Engineering with Learning (KEWL)

According to a Nielsen survey at the time of this reporting, 41% of all households have a game console. This is one market in which NASA has been absent from education and outreach efforts. Kinect Engineering with Learning (KEWL) is made to enter into that market and bring NASA education and outreach to a very familiar venue. KEWL creates an education and outreach experience that is more participatory, both in a school and museum environment. KEWL is a set of applications that runs on an Xbox 360 using the Kinect controller used for education and outreach. These applications currently include: Train R2, a visual simulation of Robonaut 2 that allows students to control a virtual R2 in a game environment; Drive R2, an interface using the Xbox 360 and Kinect controller that allows students to control the real R2 using the methods they learned playing Train R2; ISS experience, a visual tour of the interior of the International Space Station where students use their body to fly through the virtual ISS; Gravity Ball, a simulation of throwing balls in the gravity of different planets; Solar Array repair, a simulation of the simplified STS-121 solar array repair mission; and PlaySpace, a Mars/Moon application that allows students to experience different aspects of Mars/Moon. Users can "fly through" the ISS using their body, allowing an experience similar to what an astronaut would have on orbit. In PlaySpace, users can fly over the surface of Mars and view surface data obtained by Mars rovers. Users of Train R2 and Drive R2 can experience what it is like to control a robot over a distance with a time delay, simulating the time delay that would occur between ground control and an on-orbit robot. The initial ISS experiences were built using parts of code from the NASA Enigma software. The models used in these experiences were also from the Integrated Graphics Operations and Analysis Lab model database. The PlaySpace experience incorporates surface data obtained from NASA rovers and satellites and was built by NASA JPL.

Goza, Sharon↗

LES-Based Analysis of Film Cooling in a High-Pressure Turbine Rotor Including Effects of Purge and Tip Flow

Accurate modeling of coolant airflows, which form protective films over turbine blades, is essential for designing fuel-efficient and environmentally sustainable gas turbine engines. Excessive coolant reduces thermal efficiency, while insufficient coolant leads to blade overheating and causes damage. Therefore, precise prediction of flow field interactions with cooling air is critical for optimizing turbine performance. This study numerically investigates the cooling effectiveness of purge and film cooling flows within a high-pressure turbine (HPT) rotor using Large Eddy Simulation (LES). The study utilizes NASA Glenn Research Center’s Glenn-HT solver. The simulation models ethe conditions of the Penn State University START rotating rig. A high-fidelity structured mesh comprising up to 800 million cells is employed to resolve high-Reynolds number flow (Re ≈ 350,000) and to capture intricate secondary flow structures, including tip leakage and purge-induced vortices. Film cooling effectiveness computations are highly sensitive to boundary conditions at the cooling holes and to grid resolution. Even with well-resolved grids and included plena, strong mixing challenges traditional eddy viscosity models. To address this, a simplified configuration is simulated: a truncated row of shaped holes on the suction side near the leading edge and a row on the pressure side, both fed from internal plena while the purge slot and tip clearance are also modeled. Two isothermal LES cases are conducted at two distinct wall temperatures, which yield the adiabatic wall temperature and the heat transfer coefficient. The definition and means of computation of the effectiveness is discussed in this paper. The simulations reveal detailed three-dimensional unsteady flow features, including coherent vortical structures and secondary flows originating from the purge cavity. Film cooling effectiveness and Nusselt number distributions are presented for both the blade surface and tip, highlighting regions of elevated heat transfer and complex thermal behavior. These findings underscore the importance of high-resolution LES and realistic boundary conditions in capturing the dynamics of purge and film cooling, offering valuable insights for improving turbine blade design and thermal management strategies.

Secondary Flows↗

A GPU-based Approach for Turbomachinery Application

Accurate modeling of coolant airflows, which form protective films over turbine blades, is essential for designing fuel-efficient and environmentally sustainable gas turbine engines. Excessive coolant reduces thermal efficiency, while insufficient coolant leads to blade overheating and causes damage. Therefore, precise prediction of flow field interactions with cooling air is critical for optimizing turbine performance. This study numerically investigates the cooling effectiveness of purge and film cooling flows within a high-pressure turbine (HPT) rotor using Large Eddy Simulation (LES). The study utilizes NASA Glenn Research Center’s Glenn-HT solver. The simulation models ethe conditions of the Penn State University START rotating rig. A high-fidelity structured mesh comprising up to 800 million cells is employed to resolve high-Reynolds number flow (Re ≈ 350,000) and to capture intricate secondary flow structures, including tip leakage and purge-induced vortices. Film cooling effectiveness computations are highly sensitive to boundary conditions at the cooling holes and to grid resolution. Even with well-resolved grids and included plena, strong mixing challenges traditional eddy viscosity models. To address this, a simplified configuration is simulated: a truncated row of shaped holes on the suction side near the leading edge and a row on the pressure side, both fed from internal plena while the purge slot and tip clearance are also modeled. Two isothermal LES cases are conducted at two distinct wall temperatures, which yield the adiabatic wall temperature and the heat transfer coefficient. The definition and means of computation of the effectiveness is discussed in this paper. The simulations reveal detailed three-dimensional unsteady flow features, including coherent vortical structures and secondary flows originating from the purge cavity. Film cooling effectiveness and Nusselt number distributions are presented for both the blade surface and tip, highlighting regions of elevated heat transfer and complex thermal behavior. These findings underscore the importance of high-resolution LES and realistic boundary conditions in capturing the dynamics of purge and film cooling, offering valuable insights for improving turbine blade design and thermal management strategies.

Gas Turbine↗

Instability of plasma plume of micro-hollow cathode discharge

The micro-hollow cathode gas discharge driven by thermionic emission is studied using the two-dimensional particle-in-cell Monte Carlo collisions simulation. The electron current is extracted from the plasma plume penetrating into the keeper–anode space through a small keeper orifice from the cathode-keeper space. The results of simulations and a simplified analytical model showed that the plasma density and extracted current can exhibit deep modulation in the range of frequencies of tens of MHz. This modulation appears when the space-charge limited current between the plume boundary and the anode exceeds the plasma thermal electron current through the orifice.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗