Search NASA⌕ Search

SEARCH · Search NASA

Results for “Slip velocity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Structure of magnetic field in the solar wind

This work is concerned with empirical data on magnetic field in the solar wind in frame of a concept of dissipative solar wind, developed in papers (Solar Wind 7 Conf., Pergamon Press, 1992, 165 and 1992 STEP/5th COSPAR Coll. Pergamon Press, 1994, 117; 235; 803). Interplanetary magnetic fields should be classified with respect to their origin. It is very important for all the theoretical problems from the necessity to specify correctly boundary and initial conditions: the magnetic field must be sewed with its source. One should select the field, connected directly with the Sun (stretched out from it), and the field of moving electric currents. It occured central in discussion about the velocity of Alfven waves, probably warming up the solar wind, relative to the Sun, the magnetic field and solar wind plasma. The selection problem corresponds to an inverse problem and obviously has no single solution. The dissipative model of the solar wind introduce the slipping and leakage of plasma relative to magnetic field. There are no 'interplanetary current sheets' in it. But temporal fluctuations from the filamentation of electric currents play the key role. As a whole, the new concept requires the re-interpretation of main objects in the interplanetary magnetic field.

Chertkov, A. D.↗
NASA NTRS1983

The structure of particle-laden jets and nonevaporating sprays

Mean and fluctuating gas velocities, liquid mass fluxes and drop sizes were in nonevaporating sprays. These results, as well as existing measurements in solid particle-laden jets, were used to evaluate models of these processes. The following models were considered: (1) a locally homogeneous flow (LHF) model, where slip between the phases was neglected; (2) a deterministic separated flow (DSF) model, where slip was considered but effects of particle dispersion by turbulence were ignored; and (3) a stochastic separated flow (SSF) model, where effects of interphase slip and turbulent dispersion were considered using random-walk computations for particle motion. The LHF and DSF models did not provide very satisfactory predictions over the present data base. In contrast, the SSF model performed reasonably well - including conditions in nonevaporating sprays where enhanced dispersion of particles by turbulence caused the spray to spread more rapidly than single-phase jets for comparable conditions. While these results are encouraging, uncertainties in initial conditions limit the reliability of the evaluation. Current work is seeking to eliminate this deficiency.

Shuen, J. S.↗
NASA NTRS1987

Tectonic motion in the western United States inferred from very long baseline interferometry measurements, 1980-1986

Over six years of mobile very long baseline interferometry (VLBI) baseline measurements between 12 sites in the western U.S. were used to infer their velocities relative to the North American plate. These velocities were found to be generally consistent with those determined from geologic data and contemporaneous satellite laser ranging measurements in the same region. The discrepancy between the largest velocities determined from the VLBI measurements of 40-48 mm/yr and the relative plate velocity of 50-56 mm/yr predicted from plate motion models is found to be consistent with a broadened distribution of interseismic strain from cyclic activity on the San Andreas and subsidiary faults. The VLBI data are best explained by a cumulative rate of strike-slip motion near the plate boundary of approximately 48 mm/yr, although exclusion of competing values of 56 and 41 mm/yr is based upon very few data. The rates of offshore fault slip inferred from this study range from about 15 mm/yr in central California to negligible amounts in the San Francisco region. Finite element calculations of multiple fault strain distributions show good agreement with systematic variations in the distribution of shear strain along the San Andreas system, as revealed by previous geodetic measurements.

Kroger, Peter M.↗
NASA NTRS1990

Measurement of horizontal motions in Alaska using very long baseline interferometry

Results are presented on an analysis of VLBI measurements performed between 1984 and 1990 by means of a network of 53 sites in Alaska, the Yukon Territory, and the conterminous United States to determine the extent of horizontal motions in Alaska. Results are presented in two ways, one showing the evolution of individual baselines and the other yielding site velocities; both approaches use VLBI data from other permanent stations in order to define a global reference frame. It was found that VLBI sites within the Alaska-Aleutian subduction boundary zone (Yakataga, Kodiak, and Sand Point) had higher instantaneous velocities relative to eastern North America than the interior sites of Alaska. The results of Yakataga data modeling suggests that the observed motion is the result of elastic straining of the overriding plate due to a locked main thrust zone with a component of oblique slip.

Ma, C.↗
DOE OSTI2022

Precursory Off-Fault Deformation in Restraining and Releasing Step Overs: Insights From Discrete Element Method Models

Accelerating geophysical activity is detected preceding some, but not all, large earthquakes. This observation may indicate that no precursors occur before some earthquakes, or that the instrumentation lacks the required sensitivity. Here, to aid crustal monitoring efforts, we use discrete element method models to identify the locations and styles of deformation that may provide useful information about approaching fault reactivation. We model the reactivation of two healed rough faults in a variety of step over configurations, embedded in a host rock with varying amounts of damage subject to shear velocity loading parallel to the faults. Both the fault geometry and ratio of fault to host rock strength control the amount of off-fault deformation. Consistent with field observations, models with larger steps and more preexisting host rock damage produce higher amounts of off-fault deformation. We assess the size of the continuous regions of high velocities and strains to compare the value of the precursory information of each velocity and strain component. Comparing the three components of the velocity vector suggests that the fault-parallel velocity produces the largest and most temporally continuous regions of elevated velocity. The size of these regions increases toward failure, indicating the usefulness of tracking this component. Comparing the volumetric and shear components of the three-dimensional strain tensor suggests that during most of the interseismic period, the shear strain provides more information about approaching fault slip than the volumetric strain. However, in the days and months preceding fault reactivation, both the shear and volumetric strains provide similarly valuable information.

58 GEOSCIENCES↗
NASA NTRS1996

On the Boundary Conditions at an Oscillating Contact Line: A Physical/Numerical Experimental Program

We will pursue an improved physical understanding and mathematical model for the boundary condition at an oscillating contact line at high Reynolds number. We expect that the body force is locally unimportant for earth-based systems, and that the local behavior may dominate the mechanics of partially-filled reservoirs in the microgravity environment. One important space-based application for this contact-line study is for Faraday-waves. Oscillations in the direction of gravity (or acceleration) can dominate the fluid motion during take-off and reentry with large steady-state accelerations and in orbit, where fluctuations on the order of 10(exp -4)g occur about a zero mean. Our experience with Faraday waves has shown them to be 'cleaner' than those produced by vertical or horizontal oscillation of walls. They are easier to model analytically or computationally, and they do not have strong vortex formation at the bottom of the plate. Hence many, if not most, of the experiments will be performed in this manner. The importance of contact lines in the microgravity environment is well established. We will compare high resolution measurements of the velocity field (lO micro-m resolution) using particle-tracking and particle-image velocimetry as the fluid/fluid interface is approached from the lower fluid. The spatial gradients in the deviation provide additional means to determine an improved boundary condition and a measure of the slip region. Dissipation, the size of the eddy near the contact line, and hysteresis will be measured and compare to linear and nonlinear models of viscous and irrotational but dissipative models.

Perlin, Marc↗
NASA NTRS2015

An All-Fiber, Modular, Compact Wind Lidar for Wind Sensing and Wake Vortex Applications

This paper discusses an innovative, compact and eyesafe coherent lidar system developed for wind and wake vortex sensing applications. With an innovative all-fiber and modular transceiver architecture, the wind lidar system has reduced size, weight and power requirements, and provides enhanced performance along with operational elegance. This all-fiber architecture is developed around fiber seed laser coupled to uniquely configured fiber amplifier modules. The innovative features of this lidar system, besides its all fiber architecture, include pulsewidth agility and user programmable 3D hemispherical scanner unit. Operating at a wavelength of 1.5457 microns and with a PRF of up to 20 KHz, the lidar transmitter system is designed as a Class 1 system with dimensions of 30"(W) x 46"(L) x 60"(H). With an operational range exceeding 10 km, the wind lidar is configured to measure wind velocities of greater than 120 m/s with an accuracy of +/- 0.2 m/s and allow range resolution of less than 15 m. The dynamical configuration capability of transmitted pulsewidths from 50 ns to 400 ns allows high resolution wake vortex measurements. The scanner uses innovative liquid metal slip ring and is built using 3D printer technology with light weight nylon. As such, it provides continuous 360 degree azimuth and 180 degree elevation scan angles with an incremental motion of 0.001 degree. The lidar system is air cooled and requires 110 V for its operation. This compact and modular lidar system is anticipated to provide mobility, reliability, and ease of field deployment for wind and wake vortex measurements. Currently, this wind lidar is undergoing validation tests under various atmospheric conditions. Preliminary results of these field measurements of wind characteristics that were recently carried out in Colorado are discussed.

Prasad, Narasimha S.↗
DOE OSTI2024

An enrichment wall modeling framework for spectral element methods

In the present work, a first-of-its-kind enrichment wall-model is developed within the spectral element method (SEM) framework for large-eddy simulations (LES) of wall-bounded turbulent flows. The method augments the polynomial solution in the wall-adjacent elements with an analytical law-of-the-wall enrichment function representing the mean velocity near the wall. In the solution representation, this enrichment function captures the large gradients in the boundary layer, which allows the polynomial modes to represent the turbulent fluctuations. The enriched solution is able to resolve the shear stress at the wall without any modification to the no-slip wall boundary conditions, which allows for greater accuracy in the near-wall region compared to traditional methods. The enrichment wall modeling approach is implemented in a high-order SEM computational fluid dynamics solver, Nek5000, and its performance is assessed in turbulent channel flow wall-modeled LES for a range of Reynolds numbers. It is demonstrated that the enrichment wall-model improves solution accuracy on under-resolved near-wall grids as compared to traditional shear stress wall-models.

42 ENGINEERING↗
NASA NTRS1974

Similitude requirements for hypersonic, rarefied, nonequilibrium flow

Similitude requirements for hypersonic, rarefied flow with nonequilibrium chemistry and vibration are presented. The full Navier-Stokes equations with catalytic or noncatalytic walls and with or without slip conditions are nondimensionalized. The heat transfer coefficient is written in terms of fourteen dimensionless parameters and reduced to four by making the binary scaling assumption. Duplication of blunt and sharp nose heat transfer requires the use of air over a geometrically similar model with the same free stream velocity, wall temperature and product of free stream density and characteristic length. Estimates of this heat transfer coefficient are also presented.

Hendricks, W. L.↗
NASA NTRS1984

Structure of particle-laden jets - Measurements and predictions

Measurements of mean and fluctuating velocities of both phases as well as particle mass fluxes were completed in turbulent, particle-laden jets containing monodisperse particles with well-defined initial and boundary conditions. The new measurements were used to evaluate a stochastic separated flow model of the process which treated effects of interphase slip and turbulent dispersion using random-walk computations for particle motion. The continuous phase was treated using a modified k-epsilon model allowing for direct contributions of interphase transport to both mean and turbulence properties. The model performed reasonably well over the new data base, with all empirical parameters fixed from earlier work. In contrast, simplified models ignoring either interphase slip or turbulent dispersion yielded poor agreement with the measurements.

Shuen, J.-S.↗
NASA NTRS1986

Strain accumulation and surface deformation along the San Andreas, California

Stressing and rupture of a locked zone adjacent to a creeping fault segment was studied with special reference to strength heterogeneity depthwise and along-strike. The resulting precursory temporal and spatial variations of surface strain rate profiles were compared to geodetic measurements on the San Andreas fault in central California. Crustal deformation in great California earthquake cycles was also studied with special reference to the temporal decay of strain rate observed since the 1957 and 1906 great earthquakes, and comtemporary surface strain rate and velocity profiles at several locations along the San Andreas. The effect of viscoelastic response in the deep aseismic shear zone on the surface deformation behavior was examined. Work was begun on a fundamental reformulation of the crustal deformation problem focusing on the crustal deformation process affected by deep aseismic slip as the slip zone progresses toward an instability and as deep seismic slip continues postseismically, the 3-D nature of the problem due to geometry and material heterogeneity, and the time-dependent source coming from the lithosphere/astenospheric coupling process.

Li, Victor C.↗
NASA NTRS1926

Slip stream effect

The horizontal tail surfaces of a new airplane usually are proportional so that the curve of moment about the center of gravity, combined with a similar curve for the wings alone, gives a composite curve which provides a certain specified degree of static stability. With the application of power three additional factors must be considered in calculations: the moment of the propeller thrust; the change in the velocity of the air over the tail due to the slipstream; and the change in direction of the air over the tail due to the slipstream. The last two factors are considered in this report.

STABILITY↗
DOE OSTI2021

Optimal Iteration and its Application to Some Problems in Aerosol Science and Particle Dynamics

Iteration is a common technique for finding the solutions to an equation. It is easy to code, straightforward to apply, readily comprehensible, and can be run indefinitely until a given accuracy is attained. However, for a given equation there are multiple iteration schemes that can be employed, with different convergence rates, and there is no obvious way to determine a priori which is best. In this work, the convergence rates of different approaches to simple iteration schemes are analyzed and the new technique of optimal iteration, which determines the scheme that maximizes the convergence rate, is introduced and illustrated by its application to several common problems in aerosol and particle dynamics. The first application is determination of the mobility diameter of an aerosol particle from the measured mobility, which is complicated by the nonlinearity of the Cunningham correction. This same equation occurs in the determination of the diameter of multiply-charged particles with the same mobility diameter as singly-charged particles. The next application is determination of the aerodynamic diameter from the mobility diameter for situations in which the Cunningham correction must be taken into account. The final two applications are determination of the terminal velocity from the diameter, and of the diameter from the terminal velocity, for particles sufficiently large that Stokes’ Law does not apply. The technique is easy to apply and can be employed in a number of situations.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1983

The structure of evaporating and combusting sprays: Measurements and predictions

The structure of particle-laden jets and nonevaporating and evaporating sprays was measured in order to evaluate models of these processes. Three models are being evaluated: (1) a locally homogeneous flow model, where slip between the phases is neglected and the flow is assumed to be in local thermodynamic equilibrium; (2) a deterministic separated flow model, where slip and finite interphase transport rates are considered but effects of particle/drop dispersion by turbulence and effects of turbulence on interphase transport rates are ignored; and (3) a stochastic separated flow model, where effects of interphase slip, turbulent dispersion and turbulent fluctuations are considered using random sampling for turbulence properties in conjunction with random-walk computations for particle motion. All three models use a k-e-g turbulence model. All testing and data reduction are completed for the particle laden jets. Mean and fluctuating velocities of the continuous phase and mean mixture fraction were measured in the evaporating sprays.

Shuen, J. S.↗
NASA NTRS1989

A novel multistage estimation of the signal parameters of a possibly data-modulated sinusoid under very high dynamics

A novel multistage estimation scheme is presented for estimating the parameters of a received carrier signal possibly phase-modulated by unknown data, and experiencing very high Doppler, Doppler rate, etc. Such a situation arises, for example, in the case of Global Positioning Systems (GPS) where the signal parameters are directly related to the position, velocity, acceleration and jerk of the GPS receiver. In the proposed multistage scheme, the first stage estimator operates as a coarse estimator resulting in higher rms estimation errors but with a relatively small probability of the frequency estimation error exceeding one-half of the sampling frequency (an event termed cycle slip). The second state of the estimator operates on the error signal available from the first stage, refining the overall estimates, and in the process also reduces the number of cycle slips. The first stage algorithm is selected to be a modified least squares algorithm operating upon the differential signal model and referred to as differential least squares. This estimation stage provides relatively coarse estimates of the frequency and its derivatives. The second algorithm is simply an extended Kalman filter which also yields the estimate of the phase along with a more refined estimate of frequency as well. A major advantage of the proposed algorithm is a reduction in the threshold on received carrier power-to-noise power spectral density ratio as compared to the threshold achievable by either of these algorithms alone. In fact, it appears from the simulations that for the case of an unmodulated carrier, the proposed scheme achieves the same threshold as for an almost exact and computationally intensive implementation of the maximum likelihood estimator.

Kumar, Rajendra↗
DOE OSTI2023

Coupled Experimental and High-Temperature Discrete-Element Method Modeling Studies of Aluminosilicate Particle Handling in Concentrated Solar Power Environments

Chemically inert, aluminosilicate based particles have been investigated as both a thermal transport and sensible energy storage medium for concentrated solar power facilities. These particles will experience a wide range of operating temperatures (300-1000 K) and handling conditions (dense to dilute falling particle curtains, dense granular flows, or dense structures), requiring specially-designed and optimized infrastructures. The relative influence of collisional and frictional interactions between particles varies based on temperature-dependent particulate properties and greatly impacts the bulk, granular flow behavior. These underlying physics are captured using discrete element method modeling tools. However, this modeling method is computationally expensive as each particle position and interaction is tracked during the simulation. These modeling methods are further complicated by introducing temperature-dependent particle properties, high-temperature radiative exchange, and directional irradiation sources experienced by granular flows in concentrated solar power environments. Coupled experimental and numerical studies of aluminosilicate particles in rotary kilns and dense particle curtains were performed for bulk temperatures up to 1073 K. The three particle types investigated included Carbobead HSP 30 /60, Carbobead CP 30/60, and Granusil 4030. Temperature, spatial, and velocity profile data were extracted from experimental runs using embedded K-type thermocouple probes and particle image velocimetry techniques. Experimental and numerical studies were compared using spatial temperature profiles, velocity fields, and shape profiles of the bulk, granular flows. Numerical models were developed using commercially available discrete element method modeling software, Aspherix®. Existing Aspherix® functionality was expanded by introducing coupled radiative exchange modeling tools. The laboratory-scale rotary kiln was developed to investigate the steady-state heat and mass transfer performance of aluminosilicate particles based on particle type, bulk handling temperature, and wall roughness. The rotational speed of the rotary kiln was varied to control the relative impact of collisional and frictional effects upon the granular flow behavior. Heat and mass transfer performance was categorized based on the Froude number and the observed flow regimes of slipping, rolling, cascading, and centrifuging. Coupled discrete element method modeling studies were used to evaluate the effects of temperature-dependent, particulate mechanical properties upon bulk flow behavior and upon the relative effects of radiative, advective, and/or conductive heat transfer. A high-temperature (< 1073 K) falling particle curtain was similarly fabricated to investigate the heat and mass transfer performance of aluminosilicate particles in particle handling situations dominated by inter-particle collisions. The impact of particle type, flow preheat temperatures (< 1073K), and bulk mass flow rates were investigated upon the particle curtain shape, temperature, and velocity profiles. Coupled discrete element method modeling studies were performed to evaluate the varying impact of temperature-dependent, particulate mechanical properties on the bulk flow behavior and the temperature profile of the particle curtain.

14 SOLAR ENERGY↗
DOE OSTI2024

Ground-motions site and event specificity: Insights from assessing a suite of simulated ground motions in the San Francisco Bay Area

This article presents the results of a research that is part of a larger collaborative effort between the Lawrence Berkeley National Laboratory and the Pacific Earthquake Engineering Research Center, funded by the US Department of Energy Office of Cybersecurity, Energy Security and Emergency Response. The main objective of this study is to assess a suite of near and far-field simulated ground motions obtained from 20 realizations of an M7 Hayward Fault earthquake in the San Francisco Bay Area, California USA, and inform the selection of rupture simulation parameters leading to strong motions. To this aim, comparisons are conducted with NGA-W2 and directivity ground-motion models and a selected population of records. An archetypal steel moment-resisting frame is utilized to assess infrastructure response distributions. The analyses carried out for each simulated event and subdomain with consistent properties in terms of shallow shear-wave velocity proved to be instrumental for better interpreting the differences between simulated motions and empirical models. The main reasons identified for variances between simulations and empirical relationships included (1) directivity effects fully captured by the simulations across the full breadth of rupture models; (2) site vicinity to ruptures that incorporate large-slip patches, particularly if these are in the forward-directivity direction; and (3) presence of geologic structures that can “trap” seismic waves and produce ground motions with large amplitude and long signal duration. The analyses carried out in this work provide a path for interpreting ground-motion site and event specificity obtained from a suite of physics-based simulations, differing only in the rupture model characterization, to inform the selection of simulation scenarios for site-specific engineering analyses under strong excitations. Evidence from this work points to the possibility that current hazard models may underestimate ground-motion intensities in areas where the combined effect of directivity and site conditions results in large ground-motion amplitudes.

58 GEOSCIENCES↗
DOE OSTI2022

Dynamic Rupture Modeling of the 1999 Chi-Chi, Taiwan Earthquake Using 3DFinite Element Method. Sensitivity Analysis of Slip Rate Function to Model Parameters of Crustal Weak-Zone

The main objective of this study was the dynamic rupture modeling of the M7.3 1999 Chi-Chi, Taiwan earthquake. The purpose of the numerical modeling was two folded. First, using models of rupture dynamics, derive kinematic rupture characteristics, including spatial and temporal variations of the slip rate time history and rupture speed, in the long-period ground motion generation area (LMGA), strong motion generation areas (SMGAs) and background fault area for a thrust shallow rupture. Second, investigate the sensitivity of source time function characteristics in the LMGA and SMGA areas to model parameterization of low-velocity weak zone, such as thickness and shear wave velocity.

58 GEOSCIENCES↗