Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structured Light Scanning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Effect of Molecular Weight on the Ion Transport Mechanism in Polymerized Ionic Liquids

The unique properties of ionic liquids (ILs) have made them promising candidates for electrochemical applications. Polymerization of the corresponding ILs results in a new class of materials called polymerized ionic liquids (PolyILs). Though PolyILs offer the possibility to combine the high conductivity of ILs and the high mechanical strength of polymers, their conductivities are typically much lower than that of the corresponding small molecule ILs. In this study, seven PolyILs were synthesized having degrees of polymerization ranging from 1 to 333, corresponding to molecular weights (MW) from 482 to 160 400 g/mol. Depolarized dynamic light scattering, broadband dielectric spectroscopy, rheology, and differential scanning calorimetry were employed to systematically study the influence of MW on the mechanism of ionic transport and segmental dynamics in these materials. Finally, the modified Walden plot analysis reveals that the ion conductivity transforms from being closely coupled with structural relaxation to being strongly decoupled from it as MW increases.

36 MATERIALS SCIENCE↗

Single-step One-pot Synthesis of TiO 2 Nanosheets Doped with Sulfur on Reduced Graphene Oxide with Enhanced Photocatalytic Activity

A hybrid photocatalyst based on anatase TiO 2 was designed by doping TiO 2 with sulfur and incorporating reduced graphene oxide (TiO 2 -S/rGO hybrid), with an aim to narrow the band gap to potentially make use of visible light and decrease the recombination of excitons, respectively. This TiO 2 -S/rGO hybrid was successfully synthesized using a one-pot hydrothermal method via single-step reaction. The structure and morphology of the TiO 2 -S/rGO hybrid catalyst was carefully characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). Its photocatalytic reactivity was evaluated by the degradation of methyl blue. The results showed that both the doping of sulfur and the introduction of rGO worked as designed, and the TiO 2 -S/rGO hybrid exhibited high photocatalytic activity under simulated sunlight. Finally, considering both the facile and scalable reaction to synthesize TiO 2 -S/rGO hybrid, and its excellent photocatalytic performance, such TiO 2 -S/rGO hybrids are expect to find practical applications in environmental and energy sectors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hollow Fibers Structured Packings in Olefin/Paraffin Distillation: Apparatus Scale-Up and Long-Term Stability

Following the conceptual demonstration of high separation efficiency and column capacity obtained in olefin/paraffin distillation using hollow fiber structured packings (HFSPs) in a bench scale (J. Membr. Sci.2006, 2007, and 2010), we scaled-up this process with a 10-fold increase in the internal flow rate and a 3-fold increase in the module length. We confirmed that the HFSPs technology gives high separation efficiency and column capacity in iso-/n-butane distillation for 18 months. We systematically investigated the effects of packing density, concentration of light component, reflux ratio, and module age on the separation efficiency and operating stability. The comprehensive characterizations using scanning electron microscopy (SEM), Brunauer–Emmett–Teller (BET), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and dynamic mechanical analysis (DMA) were carried out to probe the changes in the morphological, thermal, and mechanical properties of polypropylene (PP) hollow fibers over the aging process. Our results suggest that after a long-term exposure to light hydrocarbon environments at ≤70 °C the morphological and mechanical properties of the PP polymer do not degrade significantly in a propane/propylene and iso-/n-butane environment.

36 MATERIALS SCIENCE↗

Poly (lactide-co-glycolide) acid nanoencapsulation of a synthetic coumarin: Cytotoxicity and bio-distribution in mice, in cancer cell line and interaction with calf thymus DNA as target

Several naturally occurring coumarin compounds, including scopoletin (7 hydroxy-6 methoxycoumarin), of plant origin have been reported to have anti-cancer potentials. A related but chemically synthesized coumarin, 4-methyl-7-hydroxy coumarin (SC), was also shown to have similar anti-cancer potentials. In the present study, to test if nano-encapsulated SC could be a more potent anti-cancer agent, we encapsulated SC with poly lactide-co-glycolide acid (PLGA) nanoparticles (Nano Coumarin; NC) and tested its potentials with a variety of protocols. NC demonstrated greater efficiency of drug uptake and showed anti-cancer potentials in melanoma cell line A375, as revealed from scanning electronic and atomic force microscopies. To test its possible interaction with target DNA, the combined data of circular dichroism spectra (CD) and melting temperature profile (T{sub m}) of calf thymus DNA treated with NC were analyzed. Results indicated a concentration dependent interaction of NC with calf thymus DNA, bringing in effective change in structure and conformation, and forming a new complex that increased its stability. Particle size and morphology of NC determined through polydispersity index and zeta potential using dynamic light scattering qualified NC to be a more potent anti-cancer agent than SC. Further, SC and NC showed negligible cytotoxic effects on normal skin cells and peripheral blood mononuclear cells of mice. Distribution assay of PLGA nanoparticles in different tissues like brain, heart, kidneys, liver, lungs, and spleen in mice revealed the presence of nanoparticles in different tissues including brain, indicating that the particles could cross the blood brain barrier, significant information for drug design. - Graphical abstract: Nanoencapsulated coumarin (NC) were characterized for their size and morphology by scanning electron (SEM) and atomic force microscopies (AFM).The physical interaction of the NC with calf thymus DNA was studied through circular dichroism (CD) spectroscopies, using UV-visible titration and thermal denaturation studies. NC had a concentration dependent interaction with calf thymus DNA, could form a new complex with double helical DNA, increased the T{sub m} value and altered CD spectra of DNA and showed stronger anti-cancer effect than synthetic coumarin. Display Omitted Research Highlights: > Strategy for PLGA nano-encapsulation of a bioactive synthetic coumarin, 4 methyl 7 hydroxy coumarin (SC) is formulated. > Anti-cancer potentials of nano-encapsulated SC (NC) are evaluated in skin papilloma cells A375 through standard protocols. > Data of CD and Tm indicate concentration dependent interactions of NC bringing conformational changes in target DNA. > Particle size of NC and physico-chemical interactions with target DNA show NC as a more potent anti-cancer drug than SC. > NC has less cytotoxic effects, and can cross the blood brain barrier - important features for strategic drug design.

60 APPLIED LIFE SCIENCES↗

Tuning of crystal phase and luminescence properties of Gd{sub 2}(MoO{sub 4}){sub 3}:Dy{sup 3+} phosphors

Graphical abstract: The optical properties of Dy{sup 3+} were found to be sensitive to the crystal phase of the as-synthesized Gd{sub 2}(MoO{sub 4}){sub 3}:Dy{sup 3+} phosphors, especially the distinct features of the charge transfer (CT) transition. The mechanism involved was discussed in detail based on the experiments and theoretic calculations. Highlights: ► The crystal phase of Gd{sub 2}(MoO{sub 4}){sub 3}:Dy{sup 3+} was tuned by changing the pH value of the solution in hydrothermal system. ► The optical properties of Dy{sup 3+} were found to be sensitive to the crystal phase of Gd{sub 2}(MoO{sub 4}){sub 3}:Dy{sup 3+}. ► The mechanisms of different crystal phases affected on the luminescence properties of Gd{sub 2}(MoO{sub 4}){sub 3}:Dy{sup 3+} were discussed. -- Abstract: The orthorhombic and monoclinic Gd{sub 2}(MoO{sub 4}){sub 3}:Dy{sup 3+} were successfully synthesized by a hydrothermal process with a subsequent annealing treatment at 800 °C for 4 h. The crystal phase of Gd{sub 2}(MoO{sub 4}){sub 3}:Dy{sup 3+} was controlled as a function of the pH value of the solution. The crystallization and microstructures of the samples were characterized by Powder X-ray diffraction (XRD) and scanning electron micrograph (SEM). Furthermore, the optical properties were investigated by the diffuse reflection, excitation and emission spectra. The mechanisms of different crystal phases affected on the luminescence properties of Gd{sub 2}(MoO{sub 4}){sub 3}:Dy{sup 3+} were discussed. The electric dipole–dipole interaction between Dy{sup 3+} ions was identified as the main mechanism for the concentration quenching of the two structures. Finally, the chromatic natures of all the samples were analyzed in detail. The results indicate that the orthorhombic phosphor Gd{sub 1.84}(MoO{sub 4}){sub 3}:Dy{sub 0.16}{sup 3+} can be considered as a suitable candidate for white light emitting diodes (W-LEDs).

36 MATERIALS SCIENCE↗

Solvent directed fabrication of Bi{sub 2}WO{sub 6} nanostructures with different morphologies: Synthesis and their shape-dependent photocatalytic properties

Graphical abstract: The morphologies of the Bi{sub 2}WO{sub 6} nanostructures can be easily tuned by altering the solvent composition during the reaction, which will yield flower-like, pancake-like and tubular nanostructures, respectively. Highlights: ► The morphologies of Bi{sub 2}WO{sub 6} can be controlled by tuning the solvent composition. ► The effects of solvent on the morphologies of Bi{sub 2}WO{sub 6} were carefully investigated. ► The growth mechanisms for the as-prepared samples were investigated. ► The morphologies of the samples greatly affect their photocatalytic activities. -- Abstract: In this work, Bi{sub 2}WO{sub 6} with complex morphologies, namely, flower-like, pancake-like, and tubular shapes have been controllably synthesized by a facile solvothermal process. The as-obtained samples are systematically investigated using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and high resolution transmission electron microscopy (HRTEM). The effects of solvents on the morphologies of Bi{sub 2}WO{sub 6} nanostructures are systematically investigated. According to the time-dependent experiments, a two-step growth mode basing on Ostwald ripening process and self-assembly has been proposed for the formation of the flower-like and pancake-like Bi{sub 2}WO{sub 6} nanostructures. The photocatalytic properties of Bi{sub 2}WO{sub 6} nanostructures are strongly dependent on their shapes, sizes, and structures for the degradation of rhodamine B (RhB) under visible-light irradiation. The deduced reasons for the differences in the photocatalytic activities of these Bi{sub 2}WO{sub 6} nanostructures are further discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Light emission from silicon with tin-containing nanocrystals

Tin-containing nanocrystals, embedded in silicon, have been fabricated by growing an epitaxial layer of Si{sub 1−x−y}Sn{sub x}C{sub y}, where x = 1.6 % and y = 0.04 % on a silicon substrate, followed by annealing at various temperatures ranging from 650 {sup ∘}C to 900 {sup ∘}C. The nanocrystal density and average diameters are determined by scanning transmission-electron microscopy to ≈10{sup 17} cm{sup −3} and ≈5 nm, respectively. Photoluminescence spectroscopy demonstrates that the light emission is very pronounced for samples annealed at 725 {sup ∘}C, and Rutherford back-scattering spectrometry shows that the nanocrystals are predominantly in the diamond-structured phase at this particular annealing temperature. The origin of the light emission is discussed.

36 MATERIALS SCIENCE↗

Monodisperse and core-shell structured SiO{sub 2}-Lu{sub 2}O{sub 3}:Ln{sup 3+} (Ln=Eu, Tb, Dy, Sm, Er, Ho, and Tm) spherical particles: A facile synthesis and luminescent properties

The core-shell structured SiO{sub 2}-Lu{sub 2}O{sub 3}:Ln{sup 3+} particles were realized by coating the Lu{sub 2}O{sub 3}:Ln{sup 3+} phosphors onto the surface of non-aggregated, monodisperse and spherical SiO{sub 2} particles by the Pechini sol-gel method. The as-synthesized products were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), energy-dispersive X-ray (EDX) spectra, scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), photolumiminescence (PL), and low-voltage cathodoluminescence (CL). The results indicate that the 800 Degree-Sign C annealed sample consists of crystalline Lu{sub 2}O{sub 3} shells and amorphous SiO{sub 2} cores, in spherical shape with a narrow size distribution. The as-obtained particles show strong light emission with different colors corresponding to different Ln{sup 3+} ions under ultraviolet-visible light excitation and low-voltage electron beams excitation, which have potential applications in fluorescent lamps and field emission displays. - Graphical Abstract: Representative SEM and TEM images of the core-shell structured SiO{sub 2}-Lu{sub 2}O{sub 3}:Eu{sup 3+} particles; CIE chromaticity diagram showing the emission colors for SiO{sub 2}-Lu{sub 2}O{sub 3}:Ln{sup 3+}; Multicolor emissions of SiO{sub 2}-Lu{sub 2}O{sub 3}:Ln{sup 3+} particles. Highlights: Black-Right-Pointing-Pointer The core-shell particles were realized by coating the phosphors onto the surface of SiO{sub 2} particles. Black-Right-Pointing-Pointer The sample consists of crystalline Lu{sub 2}O{sub 3} shells and amorphous SiO{sub 2} cores. Black-Right-Pointing-Pointer The particles show different light emission colors corresponding to Ln{sup 3+} ions. Black-Right-Pointing-Pointer They have potential applications in fluorescent lamps and field emission displays.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrothermal synthesis of coral-like Au/ZnO catalyst and photocatalytic degradation of Orange II dye

Highlights: ► Coral-like Au/ZnO was successfully prepared using green synthetic method. ► Gold nanoparticles were deposited on the ZnO structure using NaBH{sub 4} and β-D-glucose. ► Coral-like Au/ZnO exhibited superior photocatalytic activity to degrade Orange II. - Abstract: A porous coral-like zinc oxide (c-ZnO) photocatalyst was synthesized by the hydrothermal method. The coral-like structure was obtained by precipitating Zn{sub 4}(CO{sub 3})(OH){sub 6}·H{sub 2}O (ZnCH), which forms nanosheets that aggregate together to form microspheres with the coral-like structure. X-ray diffraction (XRD) studies indicate that after heating at 550 °C the ZnCH microspheres can be converted to ZnO microspheres with a morphology similar to that of ZnCH microspheres. Thermogravimetric analysis (TGA) shows this conversion takes place at approximately 260 °C. A simple electrostatic self-assembly method has been employed to uniformly disperse Au nanoparticles (1 wt.%) on the ZnO surface. In this procedure β-D-glucose was used to stabilize the Au nanoparticles. Scanning electron microscope images indicate that the diameter of coral-like ZnO microspheres (c-ZnO) is about 8 μm. X-ray diffraction reveals that the ZnO is highly crystalline with a wurtzite structure and the Au metallic particles have an average size of about 13 nm. X-ray photoelectron spectroscopic (XPS) studies have confirmed the presence of ZnO and also showed that the Au is present in the metallic state. The photocatalytic degradation of Orange II dye, with either ultraviolet or visible light, is faster on Au/c-ZnO than on c-ZnO.

36 MATERIALS SCIENCE↗

Fluorescence of silicon nanoparticles prepared by nanosecond pulsed laser

A pulsed laser fabrication method is used to prepare fluorescent microstructures on silicon substrates in this paper. A 355 nm nanosecond pulsed laser micromachining system was designed, and the performance was verified and optimized. Fluorescence microscopy was used to analyze the photoluminescence of the microstructures which were formed using the pulsed laser processing technique. Photoluminescence spectra of the microstructure reveal a peak emission around 500 nm, from 370 nm laser irradiation. The light intensity also shows an exponential decay with irradiation time, which is similar to attenuation processes seen in porous silicon. The surface morphology and chemical composition of the microstructure in the fabricated region was also analyzed with multifunction scanning electron microscopy. Spherical particles are produced with diameters around 100 nm. The structure is compared with porous silicon. It is likely that these nanoparticles act as luminescence recombination centers on the silicon surface. The small diameter of the particles modifies the band gap of silicon by quantum confinement effects. Electron-hole pairs recombine and the fluorescence emission shifts into the visible range. The chemical elements of the processed region are also changed during the interaction between laser and silicon. Oxidation and carbonization play an important role in the enhancement of fluorescence emission.

36 MATERIALS SCIENCE↗

Synthesis, morphology and optical properties of LaFeO{sub 3} nanospheres

LaFeO{sub 3} nanospheres have been successively synthesized via hydrothermal method. Structural, morphological and optical properties of the prepared nanopowder were analyzed by powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and UV–Vis absorption spectroscopy. The UV–Vis shows strong absorption at 475 nm which has excellent visible light absorption ability. Band gap energy of the prepared nanosphere was found to be 2.60 eV. The results indicate that the LaFeO{sub 3} nanospheres prepared by this method could be a kind of photocatalytic material.

36 MATERIALS SCIENCE↗

Infrared absorption spectrum of the simplest deuterated Criegee intermediate CD{sub 2}OO

We report a transient infrared (IR) absorption spectrum of the simplest deuterated Criegee intermediate CD{sub 2}OO recorded using a step-scan Fourier-transform spectrometer coupled with a multipass absorption cell. CD{sub 2}OO was produced from photolysis of flowing mixtures of CD{sub 2}I{sub 2}, N{sub 2}, and O{sub 2} (13 or 87 Torr) with laser light at 308 nm. The recorded spectrum shows close structural similarity with the spectrum of CH{sub 2}OO reported previously [Y.-T. Su et al., Science 340, 174 (2013)]. The four bands observed at 852, 1017, 1054, and 1318 cm{sup −1} are assigned to the OO stretching mode, two distinct in-plane OCD bending modes, and the CO stretching mode of CD{sub 2}OO, respectively, according to vibrational wavenumbers, IR intensities, rotational contours, and deuterium-isotopic shifts predicted with extensive quantum-chemical calculations. The CO-stretching mode of CD{sub 2}OO at 1318 cm{sup −1} is blue shifted from the corresponding band of CH{sub 2}OO at 1286 cm{sup −1}; this can be explained by a mechanism based on mode mixing and isotope substitution. A band near 936 cm{sup −1}, observed only at higher pressure (87 Torr), is tentatively assigned to the CD{sub 2} wagging mode of CD{sub 2}IOO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Three-dimensional positioning and structure of chromosomes in a human prophase nucleus

The human genetic material is packaged into 46 chromosomes. The structure of chromosomes is known at the lowest level, where the DNA chain is wrapped around a core of eight histone proteins to form nucleosomes. Around a million of these nucleosomes, each about 11 nm in diameter and 6 nm in thickness, are wrapped up into the complex organelle of the chromosome, whose structure is mostly known at the level of visible light microscopy to form a characteristic cross shape in metaphase. However, the higher-order structure of human chromosomes, between a few tens and hundreds of nanometers, has not been well understood. We show a three-dimensional (3D) image of a human prophase nucleus obtained by serial block-face scanning electron microscopy, with 36 of the complete set of 46 chromosomes captured within it. The acquired image allows us to extract quantitative 3D structural information about the nucleus and the preserved, intact individual chromosomes within it, including their positioning and full spatial morphology at a resolution of around 50 nm in three dimensions. The chromosome positions were found, at least partially, to follow the pattern of chromosome territories previously observed only in interphase. The 3D conformation shows parallel, planar alignment of the chromatids, whose occupied volumes are almost fully accounted for by the DNA and known chromosomal proteins. Here, we also propose a potential new method of identifying human chromosomes in three dimensions, on the basis of the measurements of their 3D morphology.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Shining light on nanoscale ‘vine-on-stick’ eutectic structures in the Al-Ce-Ni system

Multiphase eutectics often comprise entangled solid phases with nanoscale periodicity, making it difficult to unravel their 3D connectivity using conventional 2D techniques. Among such systems, the three-phase eutectic Al-Al 11 Ce 3 -Al 3 Ni stands out for its ultrafine (∼100 nm) interphase spacing and promising creep resistance, yet its microstructure remains relatively unexplored despite its potential for high-temperature applications. Here, we use scanning hard X-ray microscopy with an unprecedented ∼10 nm pixel size to resolve its 3D morphology. Reconstructions reveal a novel “vine-on-stick” motif, wherein Al 11 Ce 3 wraps around Al 3 Ni pillars. Analysis of phase tortuosities confirms that Al 11 Ce 3 exhibits more convoluted morphologies than Al 3 Ni. No orientation relationship was observed between the two intermetallics, suggesting that growth is controlled by local solute gradients rather than epitaxy. Fragmentation of intermetallics along their longitudinal axis suggests a Rayleigh-type breakup mechanism in solid state. The “vine-on-stick” pattern may generalize to other alloy systems with variable interfacial anisotropies and low mutual solubilities.

36 MATERIALS SCIENCE↗

Speciation mapping of the oxidation layer on aged uranium dioxide using scanning transmission x-ray spectromicroscopy

In this study, UO 2 was aged in humid air and prepared as a thin section using a focused ion beam (FIB) instrument. The specimen was measured using synchrotron radiation spectromicroscopy techniques at the Beamline 11.0.2 STXM end station of the Advanced Light Source (ALS). Non-negative matrix factorization (NMF) methods were used to identify and map three component x-ray absorption near-edge structure (XANES) spectra in the oxygen K-edge data, revealing a surface layer of U 4 O 9 with a thickness of 206 ± 21 nm, and the bulk of the sample remaining as UO 2 . Uranium N 4,5 -edge XANES spectromicroscopy supports these results. The diffusion-controlled parabolic rate constant for UO 2 oxidation to U 4 O 9 was calculated from the observed layer thickness and compared to literature values. Complementary transmission electron microscopy (TEM) was used to image the sample and identify the phases present in various regions, confirming the STXM results.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Facile synthesis and characterization of ZnFe{sub 2}O{sub 4}/{alpha}-Fe{sub 2}O{sub 3} composite hollow nanospheres

Highlights: Black-Right-Pointing-Pointer ZnFe{sub 2}O{sub 4}/{alpha}-Fe{sub 2}O{sub 3} composite hollow nanospheres were successfully synthesized via a facile method. Black-Right-Pointing-Pointer Detailed structural, morphology and the phase composition were studied. Black-Right-Pointing-Pointer The incorporation of ZnFe{sub 2}O{sub 4} and {alpha}-Fe{sub 2}O{sub 3} gives an appropriate band gap value to utilize solar energy. -- Abstract: ZnFe{sub 2}O{sub 4}/{alpha}-Fe{sub 2}O{sub 3} composite hollow nanospheres were successfully fabricated via a facile one-pot solvothermal method, utilizing polyethylene glycol as soft template. X-ray diffraction and scanning electron microscopy analysis revealed that the prepared nanospheres with cubic spinel and rhombohedra composite structure had a uniform diameter of about 370 nm, and the hollow structure could be further confirmed by transmission electron microscopy. Energy dispersive X-ray, X-ray photoelectron spectroscopy and Fourier transform infrared techniques were also applied to characterize the elemental composition and chemical bonds in the hollow nanospheres. The ZnFe{sub 2}O{sub 4}/{alpha}-Fe{sub 2}O{sub 3} composite hollow nanospheres show attractive light absorption property for potential applications in electronics, optics, and catalysis.

36 MATERIALS SCIENCE↗

Sheep lymph-nodes as a biological indicator of environmental exposure to fluoro-edenite

A significantly increased incidence of pleural mesothelioma in Biancavilla (Sicily, Italy) has been attributed to exposure to fluoro-edenite (FE), a fibrous amphibole extracted from a local stone quarry. The lymph-nodes draining the pulmonary lobes of sheep grazing around the town were examined, to gain insights into fibre diffusion. The pasture areas of six sheep flocks lying about 3 km from Biancavilla were located using the global positioning system. The cranial tracheobronchial and one middle mediastinal lymph-node as well as four lung tissue samples were collected from 10 animals from each flock and from 10 control sheep for light and scanning electron microscopy (SEM) examination. The lymph-nodes from exposed sheep were enlarged and exhibited signs of anthracosis. Histologically, especially at the paracortical level, they showed lymph-follicle hyperplasia with large reactive cores and several macrophages (coniophages) containing grey-brownish particulate interspersed with elements with a fibril structure, forming aggregates of varying dimensions (coniophage nodules). Similar findings were detected in some peribronchiolar areas of the lung parenchyma. SEM examination showed that FE fibres measured 8–41 µm in length and 0.4–1.39 µm in diameter in both lymph-nodes and lung tissue. Monitoring of FE fibres in sheep lymph-nodes using appropriate techniques can help set up environmental pollution surveillance. - Highlights: • Lymph-nodes draining sheep lung were used to assess environmental fluoro-edenite exposure. • Monitoring fluoro-edenite fibres in sheep lung nodes can provide pollution surveillance. • Our findings document a risk of fluoro-edenite fibre inhalation a few kilometres from the source. • Sheep appear to be a valuable bioindicator species.

54 ENVIRONMENTAL SCIENCES↗

Gold adatom as a key structural component in self-assembled monolayers of organosulfur molecules on Au(1 1 1)

Chemisorption of organosulfur molecules, such as alkanethiols, arenethiols and disulfide compounds on gold surfaces and their subsequent self-organization is the archetypal process for molecular self-assembly on surfaces. Owing to their ease of preparation and high versatility, alkanethiol self-assembled monolayers (SAMs) have been widely studied for potential applications including surface functionalization, molecular motors, molecular electronics, and immobilization of biological molecules. Despite fundamental advances, the dissociative chemistry of the sulfur headgroup on gold leading to the formation of the sulfur–gold anchor bond has remained controversial. This paper summarizes the recent progress in the understanding of the geometrical and electronic structure of the anchor bond. Particular attention is drawn to the involvement of gold adatoms at all stages of alkanethiol self-assembly, including the dissociation of the disulfide (S–S) and hydrogen-sulfide (S–H) bonds and subsequent formation of the self-assembled structure. Gold adatom chemistry is proposed here to be a unifying theme that explains various aspects of the alkanethiol self-assembly and reconciles experimental evidence provided by scanning probe microscopy and spectroscopic methods of surface science. Finally, while several features of alkanethiol self-assembly have yet to be revisited in light of the new adatom-based models, the successes of alkanethiol SAMs suggest that adatom-mediated surface chemistry may be a viable future approach for the construction of self-assembled monolayers involving molecules which do not contain sulfur.

36 MATERIALS SCIENCE↗