Search NASA⌕ Search

SEARCH · Search NASA

Results for “Subsystem”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Electrical power generation subsystem for Space Shuttle Orbiter

The requirements, capabilities, and design of the Space Shuttle Orbiter electrical power generation (EPG) subsystem are presented. The Orbiter EPG subsystem is designed to have the flexibility to supply the basic Orbiter electrical loads and the power requirements of the payloads which, in some cases, are completely dependent on the Orbiter for both power and heat rejection. These needs are supplied by three hydrogen/oxygen fuel cell powerplants (FCPs), having the capability of providing a total of 14 kW average and up to 24 kW peak in the basic Orbiter configuration. Kits permit dedication of one FCP to the payload by providing an additional reactant tank pair for a seven-day mission and additional heat rejection capability.

Blaski, M. F.↗
NASA NTRS1974

Design considerations for the Shuttle/Orbiter closed-circuit television subsystem

The Shuttle/Orbiter Program requirements relative to operational and performance parameters of the CCTV (closed circuit television) subsystem and their influence upon design considerations are presented. The anticipated use of the CCTV for rendezvous, docking, manipulator arm operation, satellite inspection and general orbiter operations is outlined to establish the performance requirements of each subsystem element. Typical physical characteristics, interface parameters, and remote-control design philosophy are briefly described.

Perry, W. E.↗
NASA NTRS1974

Multilevel control optimization using subsystem relative performance index sensitivity

A method is presented for the design of optimal feedback controllers for large multivariable systems with subsystem sensitivity constraints. The weighted sum of subsystem and/or operational mode relative performance index sensitivities is defined as the overall performance index. The method is developed for linear systems with quadratic performance criteria and either full or partial state feedback. An example concerning the design of a stability augmentation system for a VTOL aircraft in the transition mode demonstrates the effectiveness of the design method.

Leininger, G. G.↗
NASA NTRS1975

Primary electric propulsion thrust subsystem definition

A review is presented of the current status of primary propulsion thrust subsystem (TSS) performance, packaging considerations, and certain operational characteristics. Thrust subsystem related work from recent studies by Jet Propulsion Laboratories (JPL), Rockwell and Boeing is discussed. Existing performance for 30-cm thrusters, power processors and TSS is present along with projections for future improvements. Results of analyses to determine (1) magnetic field distributions resulting from an array of thrusters, (2) thruster emitted particle flux distributions from an array of thrusters, and (3) TSS element failure rates are described to indicate the availability of analytical tools for evaluation of TSS designs.

Masek, T. D.↗
NASA NTRS1975

Development of components for an S-band phased array antenna subsystem

The system requirements, module test data, and S-band phased array subsystem test data are discussed. Of the two approaches to achieving antenna gain (mechanically steered reflector or electronically steered phased array), the phased array approach offers the greatest simplicity and lowest cost (size, weight, power, and dollars) for this medium gain. A competitive system design is described as well as hardware evaluation which will lead to timely availability of this technology for implementing such a system. The objectives of the study were: to fabricate and test six engineering model transmit/receive microelectronics modules; to design, fabricate, and test one dc and logic multilayer manifold; and to integrate and test an S-band phased array antenna subsystem composed of antenna elements, seven T/R modules, RF manifolds and dc manifold.

Source record↗
NASA NTRS1976

Mission payloads subsystem description, revision 2

The Mission Payloads Subsystem (MPLS) which utilizes a simplified trajectory model to generate a list of missions for the Scheduling Algorithm for Mission Planning and Logistics Evaluation (SAMPLE) program is described. The MPLS is the mechanism that forms the basis of input for the other subsystems of SAMPLE and various post processors.

Williams, J. M.↗
NASA NTRS1976

A new sequential decoder for the DSN telemetry subsystem

A sequential decoder was implemented in the DSS telemetry subsystem for the DSN MARK 3 data system implementation. This decoder performs the same decoding function as the data decoder assembly performs in the telemetry and command data handling subsystem. However, the new decoder is much faster, allowing potentially high data rates in the future.

Wilcher, J. H.↗
NASA NTRS1974

Simulation verification techniques study. Subsystem simulation validation techniques

Techniques for validation of software modules which simulate spacecraft onboard systems are discussed. An overview of the simulation software hierarchy for a shuttle mission simulator is provided. A set of guidelines for the identification of subsystem/module performance parameters and critical performance parameters are presented. Various sources of reference data to serve as standards of performance for simulation validation are identified. Environment, crew station, vehicle configuration, and vehicle dynamics simulation software are briefly discussed from the point of view of their interfaces with subsystem simulation modules. A detailed presentation of results in the area of vehicle subsystems simulation modules is included. A list of references, conclusions and recommendations are also given.

Duncan, L. M.↗
NASA NTRS1976

MIUS integration and subsystems test program

The MIUS Integration and Subsystems Test (MIST) facility at the Lyndon B. Johnson Space Center was completed and ready in May 1974 for conducting specific tests in direct support of the Modular Integrated Utility System (MIUS). A series of subsystems and integrated tests was conducted since that time, culminating in a series of 24-hour dynamic tests to further demonstrate the capabilities of the MIUS Program concepts to meet typical utility load profiles for a residential area. Results of the MIST Program are presented which achieved demonstrated plant thermal efficiencies ranging from 57 to 65 percent.

Beckham, W. S., Jr.↗
NASA NTRS1977

Opto-mechanical subsystem with temperature compensation through isothemal design

An opto-mechanical subsystem for supporting a laser structure which minimizes changes in the alignment of the laser optics in response to temperature variations is described. Both optical and mechanical structural components of the system are formed of the same material, preferably beryllium, which is selected for high mechanical strength and good thermal conducting qualities. All mechanical and optical components are mounted and assembled to provide thorough thermal coupling throughout the subsystem to prevent the development of temperature gradients.

Goodwin, F. E.↗
NASA NTRS1977

Availability and mean time between failures of redundant systems with random maintenance of subsystems

It is shown how the availability and MTBF (Mean Time Between Failures) of a redundant system with subsystems maintenanced at the points of so-called stationary renewal processes can be determined from the distributions of the intervals between maintenance actions and of the failure-free operating intervals of the subsystems. The results make it possible, for example, to determine the frequency and duration of hidden failure states in computers which are incidentally corrected during the repair of observed failures.

Schneeweiss, W.↗
NASA NTRS1977

Maintenance and operations cost model for DSN subsystems

A procedure is described which partitions the recurring costs of the Deep Space Network (DSN) over the individual DSN subsystems. The procedure results in a table showing the maintenance, operations, sustaining engineering and supportive costs for each subsystems.

Burt, R. W.↗
NASA NTRS1976

Design of the High Energy Astronomy Observatory /HEAO/ power subsystem

Observatory power is generated by a partially deployable solar array which is modularized to facilitate adaptation to three missions having different power requirements. Three nickel-cadmium batteries are controlled independently from dedicated modular chargers to increase subsystem adaptability and decrease sensitivity to temperature differences between batteries. Battery level redundancy is employed, enabling mission completion with two of three battery/charger combinations operational. Bus voltage limiting is accomplished by a modularized shunt regulator which can survive any single part failure and meet all mission requirements. Relatively low shunt electronics power dissipation internal to the observatory is achieved by sequenced operation of linear shunt segments which are coupled to a large area resistive shunt radiator. Summaries of solar array, battery and subsystem breadboard test results are provided.

Reppucci, G. M.↗
NASA NTRS1976

The Shuttle Orbiter Airlock Support Subsystem /ALSS/

The Orbiter Airlock Support Subsystem (ALSS) is designed to provide shirtsleeve intervehicular transfer (IVA) between the orbiter and payload spacelab. Also, the airlock provides for extravehicular transfer (EVA) of two crewman to space and/or unpressurized payload from a pressurized cabin environment. The orbiter airlock design permits three planned EVA's for periods up to 6 hr. The airlock is designed to be interchangeable in three different locations, in the crew cabin, attached to the cabin aft bulkhead or attached to transfer tunnel adapter both which are located in the cargo bay. The Orbiter Airlock Support Subsystem described herein provides ventilation, pressurization, depressurization, prebreathing, personnel oxygen system supply (POS), and Extravehicular Mobility Unit support (EMU). This paper defines the system configuration for each airlock location and the commonality between them. Emphasis is also placed on the design data used to define repressurization and depressurization requirements, ventilation, water cooling, wastewater discharge, flow rates, and valve sizing.

Brown, J. T.↗
NASA NTRS1977

Return Beam Vidicon (RBV) panchromatic two-camera subsystem for LANDSAT-C

A two-inch Return Beam Vidicon (RBV) panchromatic two camera Subsystem, together with spare components was designed and fabricated for the LANDSAT-C Satellite; the basis for the design was the Landsat 1&2 RBV Camera System. The purpose of the RBV Subsystem is to acquire high resolution pictures of the Earth for a mapping application. Where possible, residual LANDSAT 1 and 2 equipment was utilized.

Source record↗
NASA NTRS1977

Prototype Bosch CO2 reduction subsystem for the RLSE experiment

Requirements for the Bosch carbon dioxide reduction subsystem were established in a study of regenerative life support evaluation experiments. A detailed design is presented including a schematic, components list and characteristics, requirements summaries, and complete definition of life systems' advanced control/monitor instrumentation applied to the Bosch subsystem. Design information needed to proceed with the final design and fabrication of a preprototype system is presented.

Heppner, D. B.↗
NASA NTRS1978

Thermal energy storage subsystems. A collection of quarterly reports

The design, development, and progress toward the delivery of three subsystems is discussed. The subsystem used a salt hydrate mixture for thermal energy storage. The program schedules, technical data, and other program activities from October 1, 1976, through December 31, 1977 are presented.

Source record↗