Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sulfur Cycling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Enhancing Chemical Interaction of Polysulfide and Carbon through Synergetic Nitrogen and Phosphorus Doping

The shuttling effect of the polysulfide (PS) is the most detrimental factor that causes capacity fading of Li–S batteries. By substituting carbon atoms with heteroatoms, the host materials can provide a chemical interaction with PS to trap it within the electrochemically active range of the cathode. In this study, first-principles-based calculations identify the most stable nitrogen (N) and phosphorus (P) codoped atomic structures and their corresponding adsorption energy toward different PS species. Based on the simulated predictions, we introduce a glucosamine-derived carbon nanotube aerogel (CNA) with a secondary dopant of P during the synergetic polymerization and carbonization process. The N–P codoped CNA and S composite (NPCNA-S) renders a highly stable performance even at a sulfur loading of 3.5 mg cm –2 . In conclusion, the specific capacity is >900 mAh g –1 and the stabilized capacity retention is >70% over 450 cycles at 0.2 C rate (1 C = 1675 mA g –1 ).

25 ENERGY STORAGE↗
DOE OSTI2022

Anode‐Free Lithium–Sulfur Cells Enabled by Rationally Tuning Lithium Polysulfide Molecules

Abstract The two major barriers of practical lithium–sulfur batteries are the poor reversibility of lithium‐metal anode and sluggish kinetics of sulfur cathode. Here, we report a simple yet cogent, molecular tailoring approach for lithium polysulfides, enabling a synergistic enhancement of anode reversibility and cathode kinetics. We show that SnI 4 coordinates with lithium polysulfides to form soluble complexes, resulting in a Li 2 SnS 3 ‐rich anode interphase layer. As Li 2 SnS 3 is stable against parasitic reactions and has a lower ionic resistance over cycling, the Li plating/stripping efficiency is greatly improved. In addition, the formation of soluble complexes between SnI 4 and lithium polysulfides play a non‐negligible role in suppressing the clustering behavior of lithium polysulfide molecules, resulting in a significant enhancement in sulfur conversion kinetics under lean electrolyte conditions. The synergistic improvement is validated in anode‐free, lean‐electrolyte pouch cells with a Li 2 S cathode that displays capacity retention of 78 % after 100 cycles.

Ren, Yuxun↗
DOE OSTI2020

Beyond the Polysulfide Shuttle and Lithium Dendrite Formation: Addressing the Sluggish Sulfur Redox Kinetics for Practical High-Energy Li-S Batteries

Electrolyte modulation simultaneously suppresses polysulfide the shuttle effect and lithium dendrite formation of lithium-sulfur (Li-S) batteries. However, the sluggish S redox kinetics, especially under high S loading and lean electrolyte operation, has been ignored, which dramatically limits the cycle life and energy density of practical Li-S pouch cells. In this work, we demonstrate that a rational combination of selenium doping, core-shell hollow host structure, and fluorinated ether electrolytes enables ultrastable Li stripping/plating and essentially no polysulfide shuttle as well as fast redox kinetics. Thus, high areal capacity (>4 mAh cm -2 ) with excellent cycle stability and Coulombic efficiency were both demonstrated in Li metal anode and thick S cathode (4.5 mg cm -2 ) with a low electrolyte/sulfur ratio (10 mu L mg(-1)). Overall, this research further demonstrates a durable Li-Se/S pouch cell with high specific capacity, validating the potential practical applications.

25 ENERGY STORAGE↗
DOE OSTI2023

Electrolytes with moderate lithium polysulfide solubility for high-performance long-calendar-life lithium–sulfur batteries

Lithium–sulfur (Li-S) batteries with high energy density and low cost are promising for next-generation energy storage. However, their cycling stability is plagued by the high solubility of lithium polysulfide (LiPS) intermediates, causing fast capacity decay and severe self-discharge. Exploring electrolytes with low LiPS solubility has shown promising results toward addressing these challenges. However, here, we report that electrolytes with moderate LiPS solubility are more effective for simultaneously limiting the shuttling effect and achieving good Li-S reaction kinetics. We explored a range of solubility from 37 to 1,100 mM (based on S atom, [S]) and found that a moderate solubility from 50 to 200 mM [S] performed the best. Using a series of electrolyte solvents with various degrees of fluorination, we formulated the S ingle- S olvent, S ingle- S alt, S tandard S alt concentration with M oderate L i PSs so l ubility E lectrolytes (termed S 6 MILE ) for Li-S batteries. Among the designed electrolytes, Li-S cells using fluorinated-1,2-diethoxyethane S 6 MILE (F4DEE-S 6 MILE) showed the highest capacity of 1,160 mAh g −1 at 0.05 C at room temperature. At 60 °C, fluorinated-1,4-dimethoxybutane S 6 MILE (F4DMB-S 6 MILE) gave the highest capacity of 1,526 mAh g −1 at 0.05 C and an average CE of 99.89% for 150 cycles at 0.2 C under lean electrolyte conditions. This is a fivefold increase in cycle life compared with other conventional ether-based electrolytes. Moreover, we observed a long calendar aging life, with a capacity increase/recovery of 4.3% after resting for 30 d using F4DMB-S 6 MILE. Furthermore, the correlation between LiPS solubility, degree of fluorination of the electrolyte solvent, and battery performance was systematically investigated.

25 ENERGY STORAGE↗
DOE OSTI2020

Redox-active supramolecular polymer binders derived from perylene bisimide nanowires enable high-rate lithium-sulfur batteries

To address the need for multi-functional binders specifically tailored for sulfur cathodes π-stacked perylene bisimide (PBI) molecules are repurposed as redox-active supramolecular binders in sulfur cathodes for Li—S cells. In operando lithiation of PBI binders permanently reduces Li—S cell impedance enabling high-rate cycling, a critical step toward unlocking the full potential of Li—S batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

Anode-Free Lithium–Sulfur Cells Enabled by Rationally Tuning Lithium Polysulfide Molecules

The two major barriers of practical lithium–sulfur batteries are the poor reversibility of lithium-metal anode and sluggish kinetics of sulfur cathode. Here, we report a simple yet cogent, molecular tailoring approach for lithium polysulfides, enabling a synergistic enhancement of anode reversibility and cathode kinetics. In this study, we show that SnI 4 coordinates with lithium polysulfides to form soluble complexes, resulting in a Li 2 SnS 3 -rich anode interphase layer. As Li 2 SnS 3 is stable against parasitic reactions and has a lower ionic resistance over cycling, the Li plating/stripping efficiency is greatly improved. In addition, the formation of soluble complexes between SnI 4 and lithium polysulfides play a non-negligible role in suppressing the clustering behavior of lithium polysulfide molecules, resulting in a significant enhancement in sulfur conversion kinetics under lean electrolyte conditions. The synergistic improvement is validated in anode-free, lean-electrolyte pouch cells with a Li 2 S cathode that displays capacity retention of 78 % after 100 cycles.

25 ENERGY STORAGE↗
DOE OSTI2022

Reductive biomining of pyrite by methanogens

Pyrite (FeS 2 ) is the most abundant iron sulfide mineral in Earth’s crust. Until recently, FeS 2 has been considered a sink for iron (Fe) and sulfur (S) at low temperature in the absence of oxygen or oxidative weathering, making these elements unavailable to biology. However, anaerobic methanogens can transfer electrons extracellularly to reduce FeS 2 via direct contact with the mineral. Reduction of FeS 2 occurs through a multistep process that generates aqueous sulfide (HS – ) and FeS 2 -associated pyrrhotite (Fe 1-x S). Subsequent dissolution of Fe 1-x S provides Fe(II) (aq) , but not HS – , that rapidly complexes with HS – (aq) generated from FeS 2 reduction to form soluble iron sulfur clusters [nFeS (aq) ]. Cells assimilate nFeS (aq) to meet Fe/S nutritional demands by mobilizing and hyperaccumulating Fe and S from FeS 2 . As such, reductive dissolution of FeS 2 by methanogens has important implications for element cycling in anoxic habitats, both today and in the geologic past.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Catalytic materials for lithium-sulfur batteries: mechanisms, design strategies and future perspective

Lithium-sulfur batteries (LSBs) are attractive candidates for post-lithium-ion battery technologies because of their ultrahigh theoretical energy density and low cost of active cathode materials. However, the commercialization of LSBs remains extremely challenging primarily due to poor cycling performance and safety concerns, which are inherently caused by low conductivity of S 8 and Li 2 S, severe polysulfide shuttling, and high polarization by solid Li 2 S 2 /Li 2 S deposition. Catalytic materials could facilitate the large-scale practical application of LSBs by overcoming all these challenges. In this review, we investigate the sulfur species evolution in LSBs and explore the roles of catalytic materials in charge/discharge processes, highlighting the catalysis of solid S 8 to liquid polysulfides and solid Li 2 S 2 to Li 2 S. Furthermore, we offer systematic strategies from atomic to macro levels, including defect engineering, morphology engineering and catalyst compositing, to enhance catalysis efficiency in terms of sulfur supercooling, fast charge transfer, thiosulfate generation, disulfide bond cleavage, tuneable Li 2 S growth and Li 2 S decomposition enhancement. Finally, the design and availability of the proposed catalytic materials will further advance LSB technology from coin cells and pouch cells to the subsequent commercialization scale.

25 ENERGY STORAGE↗
DOE OSTI2021

Atomically Dispersed Tin-Modified $\gamma$-alumina for Selective Propane Dehydrogenation under H 2 S Co-feed

Developing an earth-abundant catalyst that is sulfur-tolerant, active, and highly selective is of great interest for valorizing natural gas streams containing sour gas. Here, a tin-modified alumina catalyst is reported that is stable and selective for propane dehydrogenation in the presence of percent quantities of H 2 S in the feed. In particular, Sn/Al 2 O 3 –S catalysts with 1.5–5% Sn content exhibit 98% selectivity with up to 16% conversion at 560 °C during the fourth cycle. Experimental and computational characterization shows that the active sites are the defect tricoordinated Al atoms. H 2 S pretreatment further modifies a portion of these sites via exchanging a neighboring oxygen atom with sulfur, thereby rendering them more active and selective. At low loadings, Sn is atomically dispersed and selectively binds to hydroxyl groups or oxygen atoms on Al 2 O 3 . This prevents the formation of original (unmodified) defect sites on Al 2 O 3 and improves overall selectivity. The activity and selectivity of the catalyst are heavily dependent on the chemical potential of sulfur and hydrogen because they influence both the relative concentration of the two types of sites and the overall reaction mechanism. Finally, the catalyst can be regenerated fully under a pure H 2 S stream, thereby precluding treatment under oxygen, which can lead to sintering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Improved Rate for the Oxygen Reduction Reaction in a Sulfuric Acid Electrolyte using a Pt(111) Surface Modified with Melamine

The feasible commercialization of alkaline, phosphoric acid and polymer electrolyte membrane fuel cells depends on the development of oxygen reduction reaction (ORR) electrocatalysts with improved activity, stability, and selectivity. The rational design of surfaces to ensure these improved ORR catalytic requirements relies on the so-called "descriptors" (e.g., the role of covalent and noncovalent interactions on platinum surface active sites for ORR). Here, we demonstrate that through the molecular adsorption of melamine onto the Pt(111) surface [Pt(111)-M ad ], the activity can be improved by a factor of 20 compared to bare Pt(111) for the ORR in a strongly adsorbing sulfuric acid solution. Additionally, the M ad moieties act as "surface-blocking bodies," selectively hindering the adsorption of (bi)sulfate anions (well-known poisoning spectator of the Pt(111) active sites) while the ORR is unhindered. This modified surface is further demonstrated to exhibit improved chemical stability relative to Pt(111) patterned with cyanide species (CN ad ), previously shown by our group to have a similar ORR activity increase compared to bare Pt(111) in a sulfuric acid electrolyte, with Pt(111)-M ad retaining a greater than ninefold higher ORR activity relative to bare Pt(111) after extensive potential cycling as compared to a greater than threefold higher activity retained on a CN ad -covered Pt(111) surface. We suggest that the higher stability of the Pt(111)-M ad interface stems from melamine's ability to form intermolecular hydrogen bonds, which effectively turns the melamine molecules into larger macromolecular entities with multiple anchoring sites and thus more difficult to remove.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Design Principles of Single Atoms on Carbons for Lithium–Sulfur Batteries

The study of lithium-sulfur (Li-S) batteries has generated various rationally designed cathodes and modified separators. However, the shuttle of soluble lithium polysulfides (LiPSs) and the sluggish kinetics of transformation of LiPSs to Li2S2/Li2S still hinder the achievement of long-life cycling and high-rate of Li-S batteries. Even though several kinds of nanocatalysts have been studied, the catalytic effects for Li-S batteries are not ideal. Single atoms (SAs) with high surface free energy are found to serve as both anchoring and electrocatalytic centers for LiPSs. Furthermore, atomically dispersed metal catalyst on carbon provide conductive and flexible host for dielectric sulfur. Moreover, SAs as the uniform lithiophilic sites can reduce the nucleation overpotential and ensure uniformly plating of Li. In this review, the latest strategies for preparation of SAs supported on carbons are provided on the application of Li-S batteries, including cathode, modified separator and Li metal anode. In addition, it also discusses how SAs with high catalytic activity can help build better Li-S batteries and the design principles for SAs. Finally, the future directions of SAs in energy storage applications is proposed.

25 ENERGY STORAGE↗
DOE OSTI2026

Fe-single atom catalysts facilitate fast electron transfer with MoS 2 /SnS 2 cathodes in lithium–sulfur batteries

Lithium–sulfur batteries (LSBs) emerge as promising next-generation energy storage systems offering cost-effectiveness, environmental friendliness, and high theoretical energy density. The practical implementation of LSBs faces significant hindrances due to the shuttle effect and sluggish redox reactions. To address these challenges, single-atom catalyst (SAC) based combination materials from d-block elements can offer increased active catalytic sites, rapid charge transfer, accelerated electron migration, and fast sulfur redox conversion kinetics of lithium polysulfides (LiPSs). In this study, we fabricated three different LSB cathodes: pure S, S@MoS 2 /SnS 2 , and S@Fe–MoS 2 /SnS 2 . These cathodes were then used to explore the cycle life, capacity, rate capability, and redox kinetic reactions of LiPSs while assessing the influence of Fe-SACs on their performance. As a result, LSBs with S@Fe–MoS 2 /SnS 2 cathodes demonstrate an extended cycle life of 1000 cycles at a C-rate of 0.2C, maintaining a capacity close to 500 mA h g −1 , the highest initial discharge capacity of 1622 mA h g −1 and 1066 mA h g −1 at 0.05C and 0.2C, and excellent rate capabilities of 708 mA h g −1 and 558 mA h g −1 at 1C and 2C, respectively. The synergistic effect of the Fe-SAC-based combination cathode (S@Fe–MoS 2 /SnS 2 ) creates plentiful adsorptive and highly active catalytic sites, resulting in substantially enhanced capacity for adsorbing soluble long-chain LiPSs. This facilitates ultra-fast redox kinetics, surpassing the performance of the S@MoS 2 /SnS 2 and pure S cathodes. In the ex situ analysis, results from powder X-ray diffraction (XRD) to observe the new phase, soft X-ray absorption spectroscopy (XAS) to investigate the electronic structure, and hard X-ray photoelectron microscopy (HAXPES) with different energies (900 eV, 2000 eV, and 6000 eV) to track the chemical-state evolution of Fe-SACs in MoS 2 /SnS 2 cathodes displayed notable electrochemical reversibility involving S 8 ⇄ LiPSs ⇄ Li 2 S conversion even after 1000 cycles. Additionally, in situ, operando Raman analysis can unveil a novel catalytic mechanism of Fe-SACs in MoS 2 /SnS 2 “facilitating rapid electron transfer” during the discharge and charge processes of LSBs involving the conversion of S 8 ⇄ long-chain LiPSs ⇄ Li 2 S 2 /Li 2 S. This study elucidates the working mechanism of Fe-SAC cathodes, offering insights into overcoming the shuttle effect and facilitating sulfur redox kinetics to advance commercial LSBs.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Evaluation of bio-inspired flow fields in a mediated Li-S flow battery for grid energy storage

Lithium-sulfur is a redox flow battery with high energy density for applications in safe, reliable, and lasting scaling of energy. However, lithium-based batteries often encounter platting as a problem thanks to poor Li-ions deposition after cycling. Aiming to reduce this impact, a uniform and continuous flow of ions is needed. On this work, novel bio-inspired flow fields in the electrochemical cell were tested to improve ions flowability and lithium platting control, ultimately enhancing battery performance and life. To secure Li-S efficient, low-cost, and secure energy storage capabilities, we chose a configuration with decamethylferrocene and cobaltocene acting as redox mediators, Li metal as anode and sulfur kept in a separate catholyte reservoir. Flow test and battery results insinuated a beneficial influence of bio-inspired designs in flowing electrolyte uniformly with less pressure and pump power in comparison to other conventional designs used in the industry, with an encouraging ability to approach a cheap, safe, and reliable Li-S grid energy storage.

25 ENERGY STORAGE↗
DOE OSTI2020

Biomineralization of Cu 2 S Nanoparticles by Geobacter sulfurreducens

Biomineralization of Cu has been shown to control contaminant dynamics and transport in soils. However, very little is known about the role that subsurface microorganisms may play in the biogeochemical cycling of Cu. In this study, we investigate the bioreduction of Cu(II) by the subsurface metal-reducing bacterium Geobacter sulfurreducens. Rapid removal of Cu from solution was observed in cell suspensions of G. sulfurreducens when Cu(II) was supplied, while transmission electron microscopy (TEM) analyses showed the formation of electron-dense nanoparticles associated with the cell surface. Energy-dispersive X-ray spectroscopy (EDX) point analysis and EDX spectrum image maps revealed that the nanoparticles are rich in both Cu and S. This finding was confirmed by X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) analyses, which identified the nanoparticles as Cu 2 S. Biomineralization of Cu x S nanoparticles in soils has been reported to enhance the colloidal transport of a number of contaminants, including Pb, Cd, and Hg. However, formation of these Cu x S nanoparticles has only been observed under sulfate-reducing conditions and could not be repeated using isolates of implicated organisms. As G. sulfurreducens is unable to respire sulfate, and no reducible sulfur was supplied to the cells, these data suggest a novel mechanism for the biomineralization of Cu 2 S under anoxic conditions. The implications of these findings for the biogeochemical cycling of Cu and other metals as well as the green production of Cu catalysts are discussed.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Beyond the Polysulfide Shuttle and Lithium Dendrite Formation: Addressing the Sluggish Sulfur Redox Kinetics for Practical High‐Energy Li‐S Batteries

Abstract Electrolyte modulation simultaneously suppresses polysulfide the shuttle effect and lithium dendrite formation of lithium–sulfur (Li‐S) batteries. However, the sluggish S redox kinetics, especially under high S loading and lean electrolyte operation, has been ignored, which dramatically limits the cycle life and energy density of practical Li‐S pouch cells. Herein, we demonstrate that a rational combination of selenium doping, core–shell hollow host structure, and fluorinated ether electrolytes enables ultrastable Li stripping/plating and essentially no polysulfide shuttle as well as fast redox kinetics. Thus, high areal capacity (>4 mAh cm −2 ) with excellent cycle stability and Coulombic efficiency were both demonstrated in Li metal anode and thick S cathode (4.5 mg cm −2 ) with a low electrolyte/sulfur ratio (10 μL mg −1 ). This research further demonstrates a durable Li‐Se/S pouch cell with high specific capacity, validating the potential practical applications.

Zhao, Chen↗
DOE OSTI2025

Overcoming the conversion reaction limitation at three-phase interfaces using mixed conductors towards energy-dense solid-state Li–S batteries

Lithium–sulfur (Li–S) all-solid-state batteries (ASSBs) hold great promise for next-generation safe, durable and energy-dense battery technology. However, solid-state sulfur conversion reactions are kinetically sluggish and primarily constrained to the restricted three-phase boundary area of sulfur, carbon and solid electrolytes, making it challenging to achieve high sulfur utilization. Here, in this study, we develop and implement mixed ionic–electronic conductors (MIECs) in sulfur cathodes to replace conventional solid electrolytes and invoke conversion reactions at sulfur–MIEC interfaces in addition to traditional three-phase boundaries. Microscopic and tomographic analyses reveal the emergence of mixed-conducting domains embedded in sulfur at sulfur–MIEC boundaries, helping promote the thorough conversion of active sulfur into Li 2 S. Consequently, substantially improved active sulfur ratios (up to 87.3%) and conversion degrees (>94%) are achieved in Li–S ASSBs with high discharge capacity (>1,450 mAh g –1 ) and long cycle life (>1,000 cycles). The strategy is also applied to enhance the active material utilization of other conversion cathodes.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Design and synthesis of biobased superhydrophobic biochar catalyst derived from Citrus sinensis for biodiesel production using inedible oil feedstocks

In an one-pot in situ trans/esterification of low-grade feedstocks, the simultaneous presence of triglycerides (TAGs) and free fatty acids (FFAs) presents a dual catalytic challenge. While TAGs undergo transesterification to form biodiesel and glycerol, FFAs present in the feedstocks are esterified simultaneously, producing water as a by-product. This water can deactivate acid catalysts by interacting with their active sites, reducing catalytic efficiency and reusability. To overcome this, we developed a hydrophobic sulfonic acid-functionalized biochar catalyst derived from Citrus sinensis (orange peel) via sulfonation with H 2 SO 4 and subsequent silylation using hexamethyldisilazane (HMDS). The optimized catalyst exhibited a high surface area (355.09 m 2 g −1 ), sulfur content (5.33 wt%), and strong hydrophobicity (water contact angle: 154°). Compared to non-hydrophobic analogs, it showed enhanced activity and reusability (up to 10 cycles). Using response surface methodology with central composite design, a biodiesel yield of 99.1 ± 0.4% was achieved under optimal conditions. Life cycle assessment was performed to evaluate the environmental impacts of biodiesel production utilising the synthesized catalyst, considering 1000 kg of biodiesel produced as 1 functional unit. In conclusion, the recorded results showed the cumulative abiotic depletion of fossil resources over the entire biodiesel production process as 87 243.423 MJ and global warming potential as 4103.494 kg CO 2 equivalent.

Biochar↗
DOE OSTI2020

Sulfur Loaded MS 2 Barrier for Control of Polysulfide Shuttling in Lithium Sulfur Batteries (Final Report)

The lithium/sulfur battery system provides the opportunity for high capacity and low-cost batteries, and addresses the several challenges facing this technology including the need for improved rate capability and capacity retention. The presence of both 2D MS 2 nanosheets and sulfur will provide several advantages to address the limitations, including enhanced conductivity to the inherently insulating sulfur by the inclusion of MS 2 nanosheets, as well as utilizing the nanosheets to entrap negatively charged polysulfide species to prevent polysulfide shuttling and extend cycle life meeting Battery500 Program goals.

25 ENERGY STORAGE↗