Search NASA⌕ Search

SEARCH · Search NASA

Results for “Surface Metering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Fabrication of a graphite/epoxy composite leading edge for laminar flow control

Lockheed, under NASA contract, has recently completed the first phase of a program to evaluate laminar flow control concepts for transport aircraft. Achievement of laminar flow over a wing surface requires a system of slots, metering holes, ducts and pumps to be used to remove the turbulent air adjacent to the surface. This requirement poses severe restrictions on conventional metallic structure. Graphite/epoxy composite with its unique properties appears to be the material that might solve the very complex structural problems associated with a laminar flow control aircraft. A six-foot span graphite/epoxy test article incorporating provisions for leading edge cleaning, deicing and laminar flow control was designed, fabricated and tested.

Beall, R. T.↗
NASA NTRS1979

Estimation of mean sea surfaces in the north Atlantic, the Pacific and the Indian Ocean using GEOS-3 altimeter data

The mean surfaces of several regions of the world's oceans were estimated using GEOS-3 altimeter data. The northwest Atlantic, the northeast Pacific off the coast of California, the Indian Ocean, the southwest Pacific, and the Phillipine Sea are included. These surfaces have been oriented with respect to a common earth center-of-mass system by constraining the separate solutions to conform to precisely determined laser reference control orbits. The same reference orbits were used for all regions assuring continuity of the separate solutions. Radial accuracies of the control orbits were in the order of one meter. The altimeter measured sea surface height crossover differences were minimized by the adjustment of tilt and bias parameters for each pass with the exception of laser reference control passes. The tilt and bias adjustments removed long wavelength errors which were primarily due to orbit error. Ocean tides were evaluated. The resolution of the estimated sea surfaces varied from 0.25 degrees off the east coast of the United States to about 2 degrees in part of the Indian Ocean near Australia. The rms crossover discrepancy after adjustment varied from 30 cm to 70 cm depending upon geographic location. Comparisons of the altimeter derived mean sea surface in the North Atlantic with the 5 feet x 5 feet GEM-8 detailed gravimetric geoid indicated a relative consistency of better than a meter.

Marsh, J. G.↗
NASA NTRS2002

Blowing Snow Over the Antarctic Plateau

Studies of blowing snow over Antarctica have been limited greatly by the remoteness and harsh conditions of the region. Space-based observations are also of lesser value than elsewhere, given the similarities between ice clouds and snow-covered surfaces, both at infrared and visible wavelengths. It is only in recent years that routine ground-based observation programs have acquired sufficient data to overcome the gap in our understanding of surface blowing snow. In this paper, observations of blowing snow from visual observers' records as well as ground-based spectral and lidar programs at South Pole station are analyzed to obtain the first climatology of blowing snow over the Antarctic plateau. Occurrence frequencies, correlation with wind direction and speed, typical layer heights, as well as optical depths are determined. Blowing snow is seen in roughly one third of the visual observations and occurs under a narrow range of wind directions. The near-surface layers typically a few hundred meters thick emit radiances similar to those from thin clouds. Because blowing snow remains close to the surface and is frequently present, it will produce small biases in space-borne altimetry; these must be properly estimated and corrected.

Mahesh, Ashwin↗
NASA NTRS1991

Evidence for ammonium-bearing minerals in Ceres

Evidence for ammonium-bearing minerals was found on the surface of the largest asteroid Ceres. The presence of ammonium-bearing clays suggests that Ceres has experienced a period of alteration by substantial amounts of an ammonium-bearing fluid. The presence of the ammonium-bearing clays does not preclude Ceres maintaining a volatile inventory in the core or in a volatile-rich zone at some distance below the surface. Telescopic observations of Ceres, using the 3.0 meter NASA Infrared telescope facility prompted this reevaluation of its surface mineralogy.

King, T. V. V.↗
NASA NTRS1986

The development of the 15-Meter Hoop Column deployable antenna system with structural and electromagnetic performance results

This paper presents the technical results obtained during the development and engineering tests of a 15-Meter Hoop Column deployable antenna system. An important element of the 15-meter antenna program was the structural tests and the characterization of the surface accuracy of the deployed mesh surface. The overall system performance of the 15-meter antenna was obtained during radio frequency tests conducted in the Martin Marietta Near Field Test Laboratory in Denver, CO. The near field tests verified the electromagnetic performance of the structure which exhibited a surface accuracy of 0.061 in (RMS). Radio frequency tests were conducted at 2.3, 4.3, 7.7, and 11.6 GHz. The experiment and analytical results obtained through the 15-meter antenna program will provide new opportunities for the application of large space antennas for future missions.

Campbell, T. G.↗
NASA NTRS2007

Comparison of Different Global Information Sources Used in Surface Radiative Flux Calculation: Radiative Properties of the Surface

Direct estimates of surface radiative fluxes that resolve regional and weather-scale variabilty over the whole globe with reasonable accuracy have only become possible with the advent of extensive global, mostly satellite, datasets within the past couple of decades. The accuracy of these fluxes, estimated to be about 10-15 W per square meter is largely limited by the accuracy of the input datasets. The leading uncertainties in the surface fluxes are no longer predominantly induced by clouds but are now as much associated with uncertainties in the surface and near-surface atmospheric properties. This study presents a fuller, more quantitative evaluation of the uncertainties for the surface albedo and emissivity and surface skin temperatures by comparing the main available global datasets from the Moderate-Resolution Imaging Spectroradiometer product, the NASA Global Energy and Water Cycle Experiment Surface Radiation Budget project, the European Centre for Medium-Range Weather Forecasts, the National Aeronautics and Space Administration, the National Centers for Environmental Prediction, the International Satellite Cloud Climatology Project (ISCCP), the Laboratoire de Meteorologie Dynamique, NOAA/NASA Pathfinder Advanced Very High Resolution Radiometer project, NOAA Optimum Interpolation Sea Surface Temperature Analysis and the Tropical Rainfall Measuring Mission (TRMM) Microwave Image project. The datasets are, in practice, treated as an ensemble of realizations of the actual climate such that their differences represent an estimate of the uncertainty in their measurements because we do not possess global truth datasets for these quantities. The results are globally representative and may be taken as a generalization of our previous ISCCP-based uncertainty estimates for the input datasets. Surface properties have the primary role in determining the surface upward shortwave (SW) and longwave (LW) flux. From this study, the following conclusions are obtained. Although land surface albedos in the near near-infrared remain poorly constrained (highly uncertain), they do not cause too much error in total surface SW fluxes; the more subtle regional and seasonal variations associated with vegetation and snow are still on doubt. The uncertainty of the broadband black-sky SW albedo for land surface from this study is about 7%, which can easily induce 5-10 W per square meter uncertainty in (upwelling) surface SW flux estimates. Even though available surface (broadband) LW emissivity datasets differ significantly (3%-5% uncertainty), this disagreement is confined to wavelengths greater than 20 micrometers so that there is little practical effect (1-3 W per square meters) on the surface upwelling LW fluxes. The surface skin temperature is one of two leading factors that cause problems with surface LW fluxes. Even though the differences among the various datasets are generally only 2-4 K, this can easily cause 10-15 W per square meter uncertainty in calculated surface (upwelling) LW fluxes. Significant improvements could be obtained for surface LW flux calculations by improving the retrievals of (in order of decreasing importance): (1) surface skin temperature, (2) surface air and near-surface-layer temperature, (3) column precipitable water amount and (4) broadband emissivity. And for surface SW fluxes, improvements could be obtained (excluding improved cloud treatment) by improving the retrievals of (1) aerosols (from our sensitivity studies but not discussed in this work), and (2) surface (black-sky) albedo, of which, NIR part of the spectrum has much larger uncertainty.

Zhang, Yuanchong↗
NASA NTRS1984

Venus: The nature of the surface from Venera panoramas

Images of the surface of Venus obtained by the Soviet Venera 9, 10, 13 and 14 landers are analyzed to provide a basis for understanding the nature of geologic processes operating there. Bedrock is exposed at the Venera 10, 13 and 14 sites and is characterized by semi-continuous, flat polygonal to subrounded patches up to several meters in width. The bedrock surface is often dominated by sub horizontal to horizontal layered plates with thicknesses of several cm and abundant linear and polygonal vertical fractures. Soils (particles 1 cm) are abundant at the Venera 9, 10 and 13 sites, but are uncommon at Venera 14. Features indicative of a strong aeolian influence (moats, dunes, wind tails) are not observed. Several hypotheses are considered for the origin of the bedrock surfaces, and it is concluded that bedrock originated from surface lava flows. The relative freshness of features observed by the Veneras suggests that erosion rates are very low or that some bedrock surfaces are geologically young.

Garvin, J. B.↗
NASA NTRS2000

Cloud Microphysics in Hurricane Outflows: Observations in 'Bonnie' (1998) at 12 km Altitude

The water balance of a hurricane is controlled by boundary layer inflow, near vertical motion in the eyewall causing coalescence precipitation at above and residual ice precipitation at below freezing temperatures, and cirrus outflow at below -40 C aloft. In this paper we address the question of efficiency of water removal by this cirrus outflow which is important for the release of latent heat at high altitudes and its role in the dynamic flow at that level. During NASA's 1998 Convection and Moisture Experiment campaign we acquired microphysical outflow data in order to (1) determine the release and redistribution of latent heat near the top of hurricanes, (2) aid in TRMM algorithm development for remote sensing of precipitation, and (3) determine the optical/radiative characteristics of hurricane outflow. The data were acquired with Particle Measuring Systems two dimensional imaging spectrometers. On 23 August and again during the hurricane's landfall on 26 August, 1998, the NASA DC-8 aircraft penetrated hurricane 'Bonnie' four times each near 200 hPa pressure altitude. The eye crossing times were determined by (1) zero counts of cloud particles, (2) approximately 5 C increases in static and potential temperatures, and (3) minima in speeds and changes of direction of horizontal winds. The vertical winds showed shear between -6 m per second and +4 m per second and tangential winds approached 30 m per second in the eyewall. The particle volumes in the eyewall (determined by the pixels the particles shadowed in the direction of flight [x-direction] and normally to it by the number of diodes that they shadowed [y-direction]) ranged between 0.5 and 5.0 cubic centimeters per cubic meter. With a particle density near 0.2 g per cubic centimeter (determined from in situ melting and evaporation on a surface collector), the 1.0 g per meter corresponding mass of cloud ice ranged between 0.27 and 2.7 g per kilograms yielding horizontal fluxes between 8.1 and 81 g per square meters per second. The outflow ice was concentrated in crystals of a modal size of 190 micrometers. The particle size distributions were heavily skewed toward sizes with 98% of all cirrus particles smaller than the modal size comprising, however, only 20% of the mass. Thus the smaller than modal size particles dominantly affected the optical/radiative characteristics of the cloud, whereas the larger than modal size crystals determined the ice mass, hence dominated latent heating. Questions to be addressed relate to the origin of individual ice particles as the hurricane evolved and the likelihood of pristine and aggregate particle formation under the complicated conditions of rotation and outflow in the eyewall.

Pueschel, Rudolf F.↗
NASA NTRS2018

Seasonal Monitoring of Melt and Accumulation Within the Deep Percolation Zone of the Greenland Ice Sheet and Comparison with Simulations of Regional Climate Modeling

Increasing melt over the Greenland Ice Sheet (GrIS) recorded over the past several years has resulted in significant changes of the percolation regime of the ice sheet. It remains unclear whether Greenland's percolation zone will act as a meltwater buffer in the near future through gradually filling all pore space or if near-surface refreezing causes the formation of impermeable layers, which provoke lateral runoff. Homogeneous ice layers within perennial firn, as well as near-surface ice layers of several meter thickness have been observed in firn cores. Because firn coring is a destructive method, deriving stratigraphic changes in firn and allocation of summer melt events is challenging. To overcome this deficit and provide continuous data for model evaluations on snow and firn density, temporal changes in liquid water content and depths of water infiltration, we installed an upward-looking radar system (upGPR) 3.4 m below the snow surface in May 2016 close to Camp Raven (66.4779 deg N, 46.2856 deg W) at 2120 m a.s.l. The radar is capable of quasi-continuously monitoring changes in snow and firn stratigraphy, which occur above the antennas. For summer 2016, we observed four major melt events, which routed liquid water into various depths beneath the surface. The last event in mid-August resulted in the deepest percolation down to about 2.3 m beneath the surface. Comparisons with simulations from the regional climate model MAR are in very good agreement in terms of seasonal changes in accumulation and timing of onset of melt. However, neither bulk density of near-surface layers nor the amounts of liquid water and percolation depths predicted by MAR correspond with upGPR data. Radar data and records of a nearby thermistor string, in contrast, matched very well for both timing and depth of temperature changes and observed water percolations. All four melt events transferred a cumulative mass of 56 kg/(sq. m) into firn beneath the summer surface of 2015. We find that continuous observations of liquid water content, percolation depths and rates for the seasonal mass fluxes are sufficiently accurate to provide valuable information for validation of model approaches and help to develop a better understanding of liquid water retention and percolation in perennial firn.

Heilig, Achim↗
NASA NTRS2002

Light-Toned, Layered Outcrops of Northern Terra Meridiani Mars: Viking, Phobos 2, and Mars Global Surveyor Observations

Locating outcrops of sedimentary rock on Mars is an important step toward deciphering the planet's geologic and climatologic record. Sedimentary rock representing the earliest martian environments, are of particular interest in this context. This is a report about a vast exposure of material proposed to be martian sedimentary rock. The outcrops cover an area (approximately sq 300,000 km) roughly the size of the Colorado Plateau in North America (approximately 260,000 sq km). The materials occur in northern Terra Meridiani, near of one of the four sites being considered for a 2004 NASA Mars Exploration Rover (MER) landing. The landing ellipse, centered at deg S, deg W, lies in a region exhibiting smooth and rough (at meter scale) dark-toned surfaces, with scattered light-toned patches. Stratigraphically, the dark-toned materials at the MER site lie unconformably on top of a previously-eroded, light-toned surface; the light-toned patches in the landing ellipse are geologic windows down to this lower stratigraphic unit. North of the landing ellipse, the light-toned materials are well-exposed because the darker materials have been removed, stranding outlier remnants in a few locations. The light-toned materials are layered, vertically heterogeneous, and exhibit lateral continuity over hundreds of kilometers. Eroded layers produce cliffs; some outcrops are expressed as mesas, buttes, and spires; and impact craters ranging in diameter from a few meters to tens of kilometers are interbedded with the layers. The purpose of this report is to summarize the results of greater than 6 years of photogeologic investigation into the nature of the light-toned outcrops of northern Terra Meridiani. The work is a 'snapshot' of progress made toward eventual geologic mapping and establishment of the stratigraphic sequence for the materials through 30 September 2002, a day prior to the first release of Mars Odyssey Thermal Emission Imaging System (THEMIS) data to the NASA Planetary Data System (PDS). The main body of data examined were Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) images acquired through 30 September 2002. The data also 2 include Viking orbiter images, a Phobos 2 Termoscan image, MGS Mars Orbiter Laser Altimeter (MOLA) topographic observations, and the products of published Viking Infrared Thermal Mapper (IRTM) and Mars Global Surveyor (MGS) Thermal Emission Spectrometer (TES) analyses. Through September 2002, over 126,000 MOC images had been acquired, and greater than 600 of the MOC narrow angle (1.5-12 m/pixel) images occur within the portions of Terra Meridiani and southwestern Arabia Terra.

Edgett, Kenneth S.↗
NASA NTRS1922

Description of the Klemperer wing strain meter (accelerometer)

The wing strain meter enables a pilot to know the strain on lifting surfaces and to warn him of the safe limits which may not be exceeded. In wing strain the most important factors are the force of gravity and the force of lift which gives the measure of the sustaining force, and their components which are perpendicular to the lifting surfaces. This reports methods for using the wing strain meter.

INSTRUMENTS - WING LOAD INDICATORS - KLEMPERER (ZE↗
NASA NTRSDate not supplied

Tailoring the Stiffness of Large Mirrors to Reduce Specific Optical Aberrations

Presented is a method that tailors the geometry of a mirror’s core structure as well as the mounting interface such that a desired set of aberrations is reduced. It will be shown that targeting specific aberrations as opposed to reducing overall surface figure error (SFE) is a valid method to reduce weight or improve performance. Analyzed first is the self-weight deflection of a thin circular plate of uniform thickness continuously supported along its outer edge. The Kirchhoff-Love plate bending equations are related to the radially symmetric Zernike polynomials of piston, defocus, and primary spherical aberration. Next, the mirror’s radial thickness is optimized to eliminate primary and secondary spherical aberrations when the outer edge is simply supported. As an example, the method is demonstrated using a 2-meter diameter aluminum mirror where surface deflections can have an appreciable effect at mid-to-near infrared wavelengths

mirror stiffness optimization↗
NASA NTRS2012

Thermal Reactions of H2O2 on Icy Satellites and Small Bodies: Descent with Modification?

Magnetospheric radiation drives surface and near-surface chemistry on Europa, but below a few meters Europa's chemistry is hidden from direct observation . As an example, surface radiation chemistry converts H2O and SO2 into H2O2 and (SO4)(sup 2-), respectively, and these species will be transported downward for possible thermally-driven reactions. However, while the infrared spectra and radiation chemistry of H2O2-containing ices are well documented, this molecule's thermally-induced solid-phase chemistry has seldom been studied. Here we report new results on thermal reactions in H2O + H2O2 + SO2 ices at 50 - 130 K. As an example of our results, we find that warming H2O + H2O2 + SO2 ices promotes SO2 oxidation to (SO4)(sup 2-). These results have implications for the survival of H2O2 as it descends, with modification, towards a subsurface ocean on Europa. We suspect that such redox chemistry may explain some of the observations related to the presence and distribution of H2O2 across Europa's surface as well as the lack of H2O2 on Ganymede and Callisto.

Hudson, Reggie L.↗
NASA NTRS1971

Martian craters and a scarp as seen by radar.

Radar observations of Mars with a surface resolution of 1.3 deg in latitude and 0.8 deg in longitude have been carried out during the opposition of 1971. With a precision in surface height measurement approaching 75 meters in regions of high reflectivity, it has been possible to measure the detailed characteristics of a number of craters. Many of these can be identified with craters shown in Mariner photographs of Mars. In addition, a scarp has been seen at 41 deg west, 14 deg south with an average slope of about 6 deg extending over about 40 kilometers.

Pettengill, G. H.↗
NASA NTRS1972

Geologic setting of the Apollo 15 samples.

The samples and photographs returned from the Apollo 15 site show that Hadley Delta is largely underlain by breccias whose clasts are mainly fragments of coarse-grained feldspathic rocks and nonmare-type basalt. Conspicuous sets of lineaments, visible in surface and orbital photographs of Mount Hadley and Hadley Delta, may represent systematic layering or fracture sets. The mare surface, with regolith about 5 meters thick, is underlain by two major basalt types, at least one of which has extensive lateral continuity and is exposed in the upper wall of Hadley Rille. Gradual erosional recession of the edges and filing of the interior of the rille by talus have contributed to the present cross sectional profile.

Source record↗
NASA NTRS1975

Boundary lubrication of formulated C-ethers in air to 300 C

Friction and wear measurements were made in dry and moist air on CVM M-50 steel lubricated with six C-ether formulations containing phosphorus ester and organic acid additives. Results were compared to those obtained with a formulated Type 2 ester and the C-ether base fluid. A ball-on-disk sliding friction apparatus was used. Experimental conditions were a 1-kilogram load, 17 meter-per-minute (100 rpm) surface speed, and a 25 to 300 C disk temperature range. The C-ether base fluid and the C-ether formulations yielded lower wear than the ester under most test conditions. The C-ether formulations exhibited higher friction coefficients than the ester from 150 to 300 C and similar or lower values from 25 to 150 C.

Jones, W. R., Jr.↗
NASA NTRS1975

Boundary lubrication of formulated C-ethers in air to 300 C

Six C-ether formulations (containing organic acid and phosphorus ester additives) were tested in dry (less than 100 ppm H2O) and moist air (relative humidity 50 percent at 25 C) and temperatures from 25 to 300 C, in order to determine the boundary lubricating characteristics and to compare these results to those obtained with a fully formulated Type II ester and the unformulated C-ether base fluid. The apparatus, procedures and detailed results of the test are described. Friction and wear measurements were made on CVM M-50 steel under 1 kg load and 17 meter per minute (100 rpm) surface speed conditions, for a duration of 25 minutes. In general, the C-ether formulations exhibited higher friction coefficients than the ester from 150 to 300 C and similar or lower values from 25 to 150 C, furthermore, in most test conditions the C-ether base fluid and the six C-ether formulations yielded lower wear than the ester. Possible applications in the aerospace industry are mentioned.

Jones, W. R., Jr.↗