Search NASA⌕ Search

SEARCH · Search NASA

Results for “THERMODYNAMIC PROPERTIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Kinetic and thermodynamic properties of a convecting plasma in a two-dimensional dipole field

Charged particle guiding center motion is considered in the magnetic field of a two-dimensional ('line') dipole on which is superimposed a small, static, perpendicular electric field. The parallel equation of motion is that of a simple harmonic oscillator for cos theta, the cosine of magnetic colatitude theta. Equations for the perpendicular electric and magnetic drifts are derived as well as their bounce-averaged forms. The latter are solved to yield a bounce-averaged guiding center trajectory, which is the same as that obtained from conversation of magnetic moment mu, longitudinal invariant J, and total (kinetic plus electrostatic) energy K. The algebraic simplicity of the trajectory equations is also manifest in the forms of the invariants. An interesting result is that guiding centers drift in such a way that they preserve the values of their equatorial pitch angles and (equivalently) mirror latitudes. The most general Maxwellian form of the equilibrium one-particle distribution function f is constructed from the invariants, and spatially varying density and pressure moments, parallel and perpendicular to the magnetic field, are identified. Much of the paper deals with the more restricted problem in which f is specified as a bi-Maxwellian over a straight line of finite length in the equatorial plane of the dipole and perpendicular to field lines. This might be thought of as specifying a cross-tail ion injection source; our formalism then describes the subsequent spatial development. The distribution away from the source is a scaled bi-Maxwellian but one that is cut off at large and small kinetic energies, which depend on position. Density and pressure components are reduced from the values they would have if the total content of individual flux tubes convected intact. The equatorial and meridional variations of density and pressure components are examined and compared systematically for the isotropic and highly anisotropic situations. There appears to be little qualitative difference due to anisotropy. An anisotropy measure is defined, and its spatial variation determined as a signature of possible MHD instability. Extreme values are found, larger than at the source, but the plasma beta in such regions is probably so low as to render the effect inconsequential energetically. Finally, the possible consequence of 'nonadia- batic' pressure profiles on electrostatic interchanges is considered, and a boundary delineating stabilizing and destabilizing regions determined.

Huang, T. S.↗
NASA NTRS2001

Partial Pressures of Te2 and Thermodynamic Properties of Ga-Te System

The partial pressures of Te2 in equilibrium with Ga(1-x)Te(x) samples were measured by optical absorption technique from 450 to 1100 C for compositions, x, between 0.333 and 0.612. To establish the relationship between the partial pressure of Te, and the measured optical absorbance, the calibration runs of a pure Te sample were also conducted to determine the Beer's Law constants. The partial pressures of Te2 in equilibrium with the GaTe(s) and Ga2Te3(s)compounds, or the so-called three-phase curves, were established. These partial pressure data imply the existence of the Ga3Te4(s) compound. From the partial pressures of Te2 over the Ga-Te melts, partial molar enthalpy and entropy of mixing for Te were derived and they agree reasonable well with the published data. The activities of Te in the Ga-Te melts were also derived from the measured partial pressures of Te2. These data agree well with most of the previous results. The possible reason for the high activity of Te measured for x less than 0.60 is discussed.

Su, Ching-Hua↗
NASA NTRS2018

Molecular Dynamics of ULTEM 9085 for 3D Manufacturing: Spectra, Thermodynamic Properties, and Shear Viscosity.

We present results of a molecular dynamic analysis of welding at the polymer-polymer interface. The analysis is performed for polyetherimide/ polycarbonate polymer blends. The work is motivated by the applications to 3D manufacturing in space. In the first part of the report, we discuss bulk and spectral characteristics of the amorphous polymer blends. The vibrational and infra-red spectra obtained using auto-correlation functions calculations in molecular dynamics are compared with the experimental spectra. The mechanical and thermal properties of the samples including heat capacity, bulk modulus, and thermal expansion coefficients are estimated and compared with experimental values. In the second part of the report, we discuss the result of molecular dynamical modeling of shear viscosity in a fully atomistic model of amorphous polymer blends with flat interface. The key result of the research is the demonstration of shear thinning behavior of the shear viscosity as a function of shear rate which is in good agreement with experimental data.

Luchinsky, Dmitry G.↗
NASA NTRS1999

Development of a Computational Chemical Vapor Deposition Model: Applications to Indium Nitride and Dicyanovinylaniline

A computational chemical vapor deposition (CVD) model is presented, that couples chemical reaction mechanisms with fluid dynamic simulations for vapor deposition experiments. The chemical properties of the systems under investigation are evaluated using quantum, molecular and statistical mechanics models. The fluid dynamic computations are performed using the CFD-ACE program, which can simulate multispecies transport, heat and mass transfer, gas phase chemistry, chemistry of adsorbed species, pulsed reactant flow and variable gravity conditions. Two experimental setups are being studied, in order to fabricate films of: (a) indium nitride (InN) from the gas or surface phase reaction of trimethylindium and ammonia; and (b) 4-(1,1)dicyanovinyl-dimethylaminoaniline (DCVA) by vapor deposition. Modeling of these setups requires knowledge of three groups of properties: thermodynamic properties (heat capacity), transport properties (diffusion, viscosity, and thermal conductivity), and kinetic properties (rate constants for all possible elementary chemical reactions). These properties are evaluated using computational methods whenever experimental data is not available for the species or for the elementary reactions. The chemical vapor deposition model is applied to InN and DCVA. Several possible InN mechanisms are proposed and analyzed. The CVD model simulations of InN show that the deposition rate of InN is more efficient when pulsing chemistry is used under conditions of high pressure and microgravity. An analysis of the chemical properties of DCVA show that DCVA dimers may form under certain conditions of physical vapor transport. CVD simulations of the DCVA system suggest that deposition of the DCVA dimer may play a small role in the film and crystal growth processes.

Cardelino, Carlos↗
NASA NTRS1989

Properties And Coefficient Program For The Calculation Of Thermodynamic Data (PAC2)

Program calculates ideal gas thermodynamic properties for any species for which molecular constant data available, and offers user choice of methodologies for performing thermodynamic calculations. PAC2 updated to PAC4. Improvements include increased user friendliness and ability to extrapolate thermodynamic properties for gases to higher temperatures using Wilhoit's formulas.

Mcbride, B. J.↗
DOE OSTI2020

A improved equation of state for Xe gas bubbles in gamma U-Mo fuels

A monolithic fuel design based on a U-Mo alloy has been selected as the fuel type for conversion of the United States High-Performance Research Reactors (HPRRs). An issue with U-Mo monolithic fuel is the large amount of swelling that takes place during operation. The accurate prediction of fuel evolution under irradiation requires implementation of correct thermodynamic properties into mesoscale and continuum level fuel performance modeling codes. However, the thermodynamic properties of the fission gas bubbles (such as the relationship among bubble size, equilibrium Xe concentration, and bubble pressure) are not well known. This work studies Xe bubbles in ?U-Mo from a diameter of 3 nm up to 8.5 nm and from 400 K up to 700 K. The energetic relationship of Xe bubbles with regard to voids and Xe substitutional atoms is described. The transition is also determined for when a bubble becomes over-pressurized. Finally, an equation of state is fit to the pressure as a function of molar volume and temperature.

Beeler, Benjamin↗
DOE OSTI2021

When do short-range atomistic machine-learning models fall short?

In this work, we explore the role of long-range interactions in atomistic machine-learning models by analyzing the effects on fitting accuracy, isolated cluster properties, and bulk thermodynamic properties. Such models have become increasingly popular in molecular simulations given their ability to learn highly complex and multi-dimensional interactions within a local environment; however, many of them fundamentally lack a description of explicit long-range interactions. In order to provide a well-defined benchmark system with precisely known pairwise interactions, we chose as the reference model a flexible version of the Extended Simple Point Charge (SPC/E) water model. Our analysis shows that while local representations are sufficient for predictions of the condensed liquid phase, the short-range nature of machine-learning models falls short in representing cluster and vapor phase properties. These findings provide an improved understanding of the role of long-range interactions in machine learning models and the regimes where they are necessary.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Operational Limits of Redox Metal Oxides Performing Thermochemical Water Splitting

Solar thermochemical hydrogen production is an attractive technology that stores intermittent solar energy in the form of chemical bonds. Efficient operation requires the identification of a redox-active metal oxide (MO x ) material that can achieve high conversion of water to hydrogen at minimal energy input. Water splitting occurs by consecutive reduction and reoxidation reactions of MO x . MO x is reduced to MO x-δ and, in the second step, is reoxidized by water recovering the initial MO x and generate H 2 . The material must reduce at temperatures achievable in concentrated solar receiver/reactors, while maintaining a thermodynamic driving force to split water. At equilibrium, extent of reduction depends on temperature and oxygen partial pressure, and in this analysis, a set of thermodynamic properties, namely, enthalpy and entropy of oxygen vacancy formation, is sufficient to represent MO x . Herein, a method to easily classify materials based on these thermodynamic properties under any condition of oxygen partial pressure and temperature is presented. This method is based on fundamental thermodynamic principles and is applicable for any redox material with known thermodynamic properties. Despite the simplicity of the method, it is believed that this analysis will support future research in targeting thermodynamic properties of redox-active metal oxides.

water splitting↗
DOE OSTI2023

Molecular dynamics simulation studies of 1,3-dimethyl imidazolium nitrate ionic liquid with water

The fundamental understanding of intermolecular interactions of ionic liquids (ILs) with water is essential in predicting IL–water thermodynamic properties. In this study, intermolecular or noncovalent interactions were studied for 1,3-dimethyl imidazolium [DMIM]+ cation and nitrate [NO 3 ] – anion with water, employing quantum mechanics and molecular dynamics simulations. Molecular dynamics simulations were performed using a revised multipolar polarizable force field. The effect of water on ionic liquids was evaluated in terms of thermodynamic and dynamic properties. Thermodynamic properties included liquid densities ρ, excess molar volumes ΔV E , and liquid structures g(r)⁠. Dynamic properties included self-diffusion coefficients D of mixture constituents as a function of water concentration. The density of ionic liquid–water mixtures monotonically decrease with increasing concentration of water. A negative excess volume was obtained for low and high water concentrations, demonstrating strong intermolecular interactions of water with ionic liquid components. Liquid structures of ionic liquid–water mixtures revealed a tendency for anions to interact with cations at shorter intermolecular distances when the water concentration is increased. Diffusion rates were found to increase for all mixture components with increase in the fraction of water. A significant change in the diffusion rate was found at ~0.3 weight fraction of water. However, the water self-diffusion coefficient was dominant at all concentrations. Furthermore, the ratio of water/anion and anion/cation self-diffusion coefficients was found to decrease linearly with increasing concentration of water molecules.

36 MATERIALS SCIENCE↗
NASA NTRS1996

Absorption Filter Based Optical Diagnostics in High Speed Flows

Two major regimes where laser light scattered by molecules or particles in a flow contains significant information about the flow are Mie scattering and Rayleigh scattering. Mie scattering is used to obtain only velocity information, while Rayleigh scattering can be used to measure both the velocity and the thermodynamic properties of the flow. Now, recently introduced (1990, 1991) absorption filter based diagnostic techniques have started a new era in flow visualization, simultaneous velocity and thermodynamic measurements, and planar velocity measurements. Using a filtered planar velocimetry (FPV) technique, we have modified the optically thick iodine filter profile of Miles, et al., and used it in the pressure-broaden regime which accommodates measurements in a wide range of velocity applications. Measuring velocity and thermodynamic properties simultaneously, using absorption filtered based Rayleigh scattering, involves not only the measurement of the Doppler shift, but also the spectral profile of the Rayleigh scattering signal. Using multiple observation angles, simultaneous measurement of one component velocity and thermodynamic properties in a supersonic jet were measured. Presently, the technique is being extended for simultaneous measurements of all three components of velocity and thermodynamic properties.

Samimy, Mo↗