Search NASA⌕ Search

SEARCH · Search NASA

Results for “Temperature evolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

A protocol for calculating basal melt rates in the ISMIP6 Antarctic ice sheet projections

Climate model projections have previously been used to compute ice shelf basal melt rates in ice sheet models, but the strategies employed – e.g., ocean input, parameterization, calibration technique, and corrections – have varied widely and are often ad hoc. Here, a methodology is proposed for the calculation of circum-Antarctic basal melt rates for floating ice, based on climate models, that is suitable for ISMIP6, the Ice Sheet Model Intercomparison Project for CMIP6 (6th Coupled Model Intercomparison Project). The past and future evolution of ocean temperature and salinity is derived from a climate model by estimating anomalies with respect to the modern day, which are added to a present-day climatology constructed from existing observational datasets. Temperature and salinity are extrapolated to any position potentially occupied by a simulated ice shelf. A simple formulation is proposed for a basal melt parameterization in ISMIP6, constrained by the observed temperature climatology, with a quadratic dependency on either the nonlocal or local thermal forcing. Two calibration methods are proposed: (1) based on the mean Antarctic melt rate (MeanAnt) and (2) based on melt rates near Pine Island's deep grounding line (PIGL). Future Antarctic mean melt rates are an order of magnitude greater in PIGL than in MeanAnt. The PIGL calibration and the local parameterization result in more realistic melt rates near grounding lines. PIGL is also more consistent with observations of interannual melt rate variability underneath Pine Island and Dotson ice shelves. This work stresses the need for more physics and less calibration in the parameterizations and for more observations of hydrographic properties and melt rates at interannual and decadal timescales.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Effects of Pressure on Superconducting Properties and Vortex Pinning of CaKFe 4 As 4 Single Crystals

Measurements of low field magnetization, trapped flux magnetization and 5 K flux creep in single crystal of CaKFe 4 As 4 under pressure up to 7.5 GPa in a diamond pressure cell are presented. Further, the observed evolution of the temperature dependence of the self-field critical current and slowing down of the base temperature flux creep rate are explained within the two sources of pinning hypothesis involving presence of CaFe 2 As 2 intergrowths suggested in the literature. Above the half collapsed tetragonal structural transition under pressure, where superconductivity is non-bulk or absent, critically diminished or no diamagnetism and flux trapped magnetization were observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Development of Surveillance Test Articles for Materials Degradation Management in MSR Environments

Materials in molten salt reactors (MSR) undergo accelerated degradation from corrosion, irradiation, and cyclic loads at elevated temperatures. Establishing a materials surveillance program to enable the assessment of material deterioration is critical to assure structural integrity of MSRs components. This presentation summarizes recent efforts towards the development of surveillance test articles for collecting various damages for monitoring materials degradation. Surveillance test articles with reduced dimensions were designed to capture creep-fatigue damage from cyclic loading at elevated temperatures. The strain evolution of test articles during thermal cycling was analyzed both numerically and experimentally. Out-of-reactor thermal cycling demonstrated successful capture of strain range for materials assessment. Moreover, test articles were subject to both mechanical loads and molten salt exposure, and the damage due to stress and corrosion was investigated. Additionally, damage inference models were developed to predict the remaining life of materials based on the accumulated damage in surveillance test articles.

36 - MATERIALS SCIENCE↗
DOE OSTI2020

Scoping Studies to ascertain the change in the phase transition temperature of metallic fuels

Microstructure evolution due to irradiation in a nuclear reactor can have a dramatic effect on material properties. A better understanding of this evolution is necessary for developing improved nuclear fuels and materials. In the current scoping study we evaluate the influence of irradiation induced defects on the recrystallization temperature of a single component fuel surrogate.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Zero thermal expansion in non-stoichiometric and single-phase (Hf,Nb)Fe 2.5 alloy

Zero thermal expansion (ZTE) alloys are dimensionally stable under the influence of heat, which is critical in high-precision components but remains rare among single phase materials. This work reports a single phase and nearly isotropic ZTE alloy (Hf 0.8 Nb 0.2 )Fe 2.5 over a wide temperature range of 5–460 K ($α_l ≈ 1.07 × 10^{–6} K^{–1}$) via non-stoichiometric regulation. The introduction of excess Fe breaks the dual-phase nature of parent alloy, extends the magnetic ordering temperature, and induces a spin reorientation. Further, the evolution of magnetic structure versus temperature gives rise to the ZTE behavior. The design concept of changing the internal magnetic interaction through non-stoichiometric regulation provides support for the discovery of novel ZTE materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Spatially and Spectrally Resolved Defects in Polycrystalline CdTe Thin Films Revealed by Quantitative Cathodoluminescence

Increasing the grain size is a potential strategy to reduce grain-boundary recombination and improve performance of thin-film solar cells. Here, CdTe thin films with a range of grain sized were produced by varying the CdC1 2 post-deposition treatment temperature. We use high-resolution cathodoluminescence (CL) microscopy to study recombination and shallow defect levels in detail. Intensities from room temperature CL maps were compared across samples. We find that the CL intensity initially increases with grain size, as expected, but then plateaus as the grain size is increased further. The plateau is correlated with a decrease in the characteristic length-related to the carrier diffusion length-determined from CL intensity profiles near grain boundaries. In addition, low-temperature CL measurements demonstrate the evolution of the defect levels with CdC1 2 temperature.

cadmium telluride thin films↗
DOE OSTI2022

In situ study on heavy ion irradiation induced microstructure evolution in single crystal Cu with nanovoids at elevated temperature

Understanding the response of nanovoids to irradiation damage advances our capability to design radiation tolerant materials. Recent in situ studies reveal the shrinkage of hexagon-shaped nanovoids in (110) textured Cu. However, the evolution of voids with irregular geometries under irradiation is less well understood. Here, in situ Kr ion irradiation was performed at 100 °C on single-crystal Cu (112) that possesses nanovoids with high aspect ratio. In situ studies show these elongated voids fragment into smaller voids and shrink gradually with increasing dose. Phase field simulations confirm that fragmentation of the void is governed by the competing kinetics between atoms diffusing toward and away from the elongated nanovoid. In conclusion, cost irradiation analysis reveals the formation of high-density defect clusters.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Chromium segregation-induced oxide evolution in Ni-10Cr alloys during high-temperature oxidation

The oxidation behavior of a Ni-10(wt%)Cr alloy under high-temperature O 2 conditions is investigated using transmission electron microscopy and first-principles calculations. Results reveal that chromium segregation plays a central role in driving the evolution of complex oxide phase structures during oxidation. At low Cr concentrations, Cr preferentially segregates to NiO grain boundaries or internal pores, substituting for Ni atoms and forming Ni(Cr)O solid solutions. As Cr content increases, enhanced diffusion promotes Cr penetration into the NiO lattice, leading to the formation of multiphase oxide structures. First-principles modeling corroborates these findings: at low Cr concentrations, Cr atoms favor surface and grain-boundary segregation, while higher concentrations lead to Cr aggregation within the NiO bulk. Furthermore, the integrated experimental-theoretical approach provides atomistic insights into Cr-mediated mass transport mechanisms during alloy oxidation and offers valuable guidance for controlling oxide growth kinetics and phase stability in Ni-Cr alloys, with implications for improving oxidation resistance in high-temperature structural applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Ambiguities in the hadro-chemical freeze-out of Au+Au collisions at SIS18 energies and how to resolve them

The thermal fit to preliminary HADES data of Au+Au collisions at $\sqrt{s_{NN}}$=2.4 GeV shows two degenerate solutions at T≈50 MeV and T≈70 MeV. The analysis of the same particle yields in a transport simulation of the UrQMD model yields the same features, i.e. two distinct temperatures for the chemical freeze-out. While both solutions yield the same number of hadrons after resonance decays, the feeddown contribution is very different for both cases. This highlights that two systems with different chemical composition can yield the same multiplicities after resonance decays. The nature of these two minima is further investigated by studying the time-dependent particle yields and extracted thermodynamic properties of the UrQMD model. It is confirmed, that the evolution of the high temperature solution resembles cooling and expansion of a hot and dense fireball. The low temperature solution displays an unphysical evolution: heating and compression of matter with a decrease of entropy. These results imply that the thermal model analysis of systems produced in low energy nuclear collisions is ambiguous but can be interpreted by taking also the time evolution and resonance contributions into account.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Recrystallization driven softening and heating rate dependencies of FeCrAl nuclear fuel cladding during accident transients

A refined understanding of FeCrAl cladding behavior during rapid transients is critical for its potential deployment in light-water reactors. Current assessments focus on transient burst testing metrics such as balloon geometry, burst temperature, and hoop stress, often used as proxies for simpler conventional tensile properties. However, directly correlating isothermal tensile and creep data with accident transient scenarios remains a challenge, although it is essential for high fidelity model development. Recent modeling based on tensile tests up to 800 °C, conducted with both immediate loading and a 10-minute soak, showed that immediate loading better predicts experimental burst temperatures, indicating a thermal softening effect. Building upon this observation, the current study connects transient performance, microstructural evolution, and high-temperature tensile properties by leveraging results from C26M claddings burst tests performed at heating rates of 1–50 °C/s and hoop stresses from 25 to 100 MPa. At 25 MPa, rupture temperatures varied by only 6 °C, but at 100 MPa, the difference reached 116 °C, with faster heating yielding higher burst temperatures. Microstructural analysis identified recrystallization as the primary cause of heating rate-dependent softening, eliminating prior cold-working. In-situ thermomechanical data linked ballooning onset to localized instabilities, similar to ultimate tensile strength behavior in conventional tensile tests. High heating rates correlated with immediate loading tensile data, while lower rates matched soaked data. Furthermore, by linking burst performance to microstructural evolution and tensile properties, this work provides a foundation for more accurate modeling of FeCrAl claddings and potentially other Fe-based materials under accident conditions.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Strengthening mechanisms, hardening/softening behavior, and microstructure evolution in an LPSO magnesium alloy at elevated temperatures

Here, rapid degradation of the mechanical properties of conventional Mg alloys with temperature precludes their wide application in industry. The LPSO (long period stacking ordered) Mg alloys, on the other hand, show considerable potential to achieve excellent high-temperature mechanical performance. In this study, a Mg-5.1Y-2.4Zn (wt.%) extrusion alloy with the microstructure comprising of α-Mg matrix and LPSO phase was prepared. It is shown that the yield strength of the alloy at 200 °C retained ~83% of the yield strength of 198 MPa at room temperature (RT). Importantly, the ductility also improved, owing to the increased non-basal slip activities at elevated temperatures. In contrast to RT and 200 °C, the alloy exhibited softening tensile behavior with an apparent loss of yield strength at 300 °C. In-situ lattice strain analysis revealed that load transfer from α-Mg to LPSO remains effective at temperatures up to 200 °C, governing the high yield strength of the alloy. The post-mortem analysis by means of electron microscopy confirmed that the LPSO phase is structurally stable at 200 °C. In particular, the high strain hardenability is rationalized by the sandwiched LPSO structures together with stacking faults serving as effective obstacles to the motion of non-basal dislocations. The load transfer effect disappears at the temperature of 300 °C, resulting in the fast deterioration of strength of the alloy. The cracking of the LPSO phase along with the recrystallizing of α-Mg grains were found to be the main causes for the softening behavior of the alloy at 300 °C.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Numerical Simulation of Electron Magnetohydrodynamics with Landau-quantized Electrons in Magnetar Crusts

Abstract In magnetar crusts, magnetic fields are sufficiently strong to confine electrons into a small to moderate number of quantized Landau levels. This can have a dramatic effect on the crust's thermodynamic properties, generating field-dependent de Haas–van Alphen oscillations. We previously argued that the large-amplitude oscillations of the magnetic susceptibility could enhance the ohmic dissipation of the magnetic field by continuously generating small-scale, rapidly dissipating field features. This could be important to magnetar field evolution and contribute to their observed higher temperatures. To study this, we performed quasi-3D numerical simulations of electron MHD in a representative volume of neutron star crust matter, for the first time including the magnetization and magnetic susceptibility resulting from Landau quantization. We find that the potential enhancement in the ohmic dissipation rate due to this effect can be a factor ∼3 for temperatures of the order of 10 8 K, and ∼4.5 for temperatures of the order of 5 × 10 7 K, depending on the magnetic field configuration. The nonlinear Hall term is crucial to this amplification: without it, the magnetic field decay is only enhanced by a factor ≲2 even at 5 × 10 7 K. These effects generate a high wavenumber plateau in the magnetic energy spectrum associated with the small-scale de Haas–van Alphen oscillations. Our results suggest that this mechanism could help explain the magnetar heating problem, though due to the effect's temperature-dependence, full magneto-thermal evolution simulations in a realistic stellar model are needed to judge whether it is viable explanation.

Rau, Peter B. (ORCID:0000000152209277)↗
DOE OSTI2022

Radio-Frequency Rapid Thermal Processing Enabling Spatial Phase Transformation and Nanocrystallization of Soft Magnetic Amorphous Alloys

Thermal processing of soft magnetic amorphous and nanocrystalline alloys is explored under the influence of radio-frequency induction-heating techniques. Direct induction-heating concepts based on longitudinal and transverse flux heating are examined and the details of electromagnetic fields interaction with metallic strips are discussed by analytical calculations as well as finite element analysis. Initial experimental results confirming spatial control of phase transformations and nanocrystallization within a single strip of Finemet Fe-based amorphous ribbons are reported. Here, the degree to which primary and secondary crystallization temperature are achieved depends on the spacing between the ribbon relative to the induction coil as well as the coil design and configuration. For transverse coil configurations, the local temperature and therefore microstructural evolution is different across the lateral dimension of processed ribbons, with reduced gap sizes producing enhanced peak temperatures and larger temperature distributions with greater spatial variation in microstructure. In addition, indirect susceptor-based induction heating under tension is performed and the impact of microstructure is demonstrated. Herein, potential for exploiting spatially optimized phase transformations is illustrated through electromagnetic field–assisted processing in a scalable manufacturing process with amorphous and nanocrystalline soft magnetic alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Prediction of pellet mass thresholds for ELM triggering in low-collisionality, ITER-like discharges

Abstract In ITER, pellets are calculated to require more than 8 times the mass than currently planned to reliably trigger edge-localized modes (ELMs). Unmitigated heat flux impulses from ELMs are intolerable in ITER at full power and current. Therefore, ITER operation relies on multiple approaches to control ELM heat fluxes. One method is pellet ELM pacing to instigate small rapid ELMs with low heat flux. Predicting the performance of pellet pacing is critical for ITER, which is expected to operate in a regime with a low-collisionality, peeling-limited pedestal. However, to trigger ELMs the local pressure increase in the expanding pellet cloud pushes the equilibrium over the ballooning stability limit. In this work, linear and nonlinear M3D-C1 simulations are used to predict pellet mass thresholds in DIII-D discharges and ITER scenarios with peeling-limited pedestals. It is found that the distance of the equilibrium’s operational point from the ballooning branch of the pedestal stability boundary strongly changes thresholds. Linear M3D-C1 simulations find a strong dependence of the pellet mass threshold on the poloidal injection location for ITER’s 15 MA, Q = 10 scenario. The required pellet mass at the planned injection locations is 8 to 17 times larger than currently considered. However, such linear simulations do not include pellet ablation physics or time evolution of density and temperature. A new scheme of 2D nonlinear simulations, coupled with linear stability analysis at various steps throughout the nonlinear time evolution, was developed to include such physics and improve on the linear results. These new nonlinear-to-linear simulations confirm previous findings. This result suggests that pellet ELM triggering in ITER could require pellets much larger than those currently planned, which makes ELM-pacing operationally challenging. On the other hand, fueling pellets injected from the high-field side will likely not unintentionally trigger ELMs in an otherwise ELM-stable plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Optimal control of the electron temperature profile in DIII-D using machine learning surrogate models

The viability of the tokamak as a potential fusion reactor depends on the ability to keep the plasma in a stable regime while achieving temperatures, densities, and confinement times that are as high as possible. Tokamak scenario development attempts to find plasma regimes that achieve all of these conditions and are accessible with a given set of hardware constraints. This requires the ability to control plasma properties such as the normalized beta, the internal inductance, safety factor, rotation, etc. One property that has received less attention than some of the others, but is no less critical to achieving high performance, is the electron temperature (T e ) profile. In this work, Linear Quadratic Integral (LQI) control is used to develop a controller for the electron temperature profile in DIII-D. The controller is based on a linearized model derived from the transport equation that describes the evolution of the electron temperature, and includes contributions from the neural network surrogate models NubeamNet and MMMnet. Furthermore, the controller is tested in simulation using COTSIM, and is proven capable of tracking a target T e profile.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Carbon doping in GeTe drives differences in local structure and properties

Advances in low-power, energy-efficient information storage and computing require understanding and controlling the atomic and nanoscale structures of functional materials, such as phase-change materials. Phase-change memory technology enables nonvolatile, low-power memory in devices by storing information through reversible changes in a phase-change material's atomic structure (i.e., transformations between amorphous and crystalline phases) that have corresponding changes in properties, including electronic resistivity and optical reflectivity. Here, we apply complementary X-ray absorption spectroscopy and X-ray pair distribution function analyses to experimentally identify the local- and medium-range atomic structure differences of GeTe and C-doped GeTe thin films. Upon controlled heating, composition- and temperature-dependent atomic structure evolution in GeTe and C-doped GeTe films shows differences in bonding behavior and local structure that directly influence crystallization onset temperature. We find that the introduction of C interrupts Ge–Ge bonds in amorphous GeTe, altering the as-deposited structure to be more similar to the distorted rocksalt structure of crystalline α–GeTe. The change alters the response of the amorphous atomic structure to heating and also lowers the crystallization onset temperature, from 230 °C in GeTe to 220 °C in the C-doped film. The combined insights from both X-ray techniques provide understanding of structural transformations that enables the development and optimization of next-generation memory and computing materials.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Expansion-driven Weibel instability in magnetohydrodynamics: Linear theory for static systems

The Weibel dispersion relation is obtained in the magnetohydrodynamic (MHD) approximation by including a tensor expression for temperature. MHD gives an upper cutoff wavenumber for Weibel growth identical to kinetic theory if the electron drift velocity is included in the evolution of the electron temperature. MHD overestimates growth rates compared to kinetic theory and gives maximum growth at larger wavenumbers, but it only leads to divergent results as temperature anisotropy tends to infinity. Thermal conduction in MHD lowers the growth rates and shifts maximum growth to smaller wavenumbers, but flux-limited or nonlocal thermal conduction is found to significantly limit these effects. The results are used as a first step in evaluating the potential of MHD to simulate expansion-driven Weibel instability, which occurs due to the temperature tensor only cooling in the direction of expansion. Finally, the small temperature anisotropy found in expansion-driven Weibel instability means that MHD could be an adequate model because growth rates are much less than the electron plasma frequency, and wavelengths are much greater than the Debye length.

Davies, J. R. [Univ. of Rochester, NY (United Stat↗