Search NASA⌕ Search

SEARCH · Search NASA

Results for “Thermodynamic Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Experiments to validate Thermodynamics and Transport models of Strongly Coupled Dusty Plasma Matter (Final Technical Report for DE-SC0023416)

The goal of this two-year grant is to provide access to the PI to dusty plasma experimental facilities at the DOE-funded Collaborative Research Facility Magnetized Plasma Research Laboratory, Auburn University to become a user of that facility, to obtain experimental data to support another ongoing grant DE-SC0021146 (an Early Career Award to the PI that is focused on modeling of dusty plasma thermodynamics and transport processes), to generate experimental data for funding proposals, and to provide exposure to University of Memphis students to advanced experimental techniques. The following technical accomplishments were made: 1. Development of a novel Bidirectional Electrode Control Arms Assembly (BECAA) for producing perfect 2D grain layers for complex plasma experimentation. BECAA uses movable electrode arms to tilt or move the electrode in a RF discharge from outside the chamber, allowing for the manipulation of grain clouds without needing to change the plasma parameters or gas pressure. This work addresses a longstanding gap in the literature for a method to produce clusters of selectable number of grains and that are perfectly two dimensional as opposed to being only quasi-2D. 2. Experimental investigation of the structural properties of finite-N clusters with N=2 to 50. Individual particle behavior in clusters could vary from grain to grain and this study measured systematically produced clusters for two different grain sizes. Analysis (funded by another grant DE-SC0021146) is currently underway to quantify the differences between grains that are found on the surface vs. the interior of clusters, the shell structure, and the decay of correlations in position, velocity, and kinetic energy. 3. An experimental method to measure the structural entropy of clusters was developed by observing the self-induced structural transitions between various possible arrangements. In a series of heating and cooling cycles, the number of times each possible arrangement was attained was experimentally observed and used to compute the probability of existence of that arrangement, and subsequently the configurational entropy of the cluster. Analysis (funded by another grant DE-SC0021146) is currently underway to produce the entropy of clusters as a function of the number of grains and use the same to compute thermodynamic state variables for 2D complex plasma/grain clusters. 4. A preliminary experimental study of multibody collisions between N grains (N=2 – 10) was conducted. The clusters were produced using the BECAA technique and velocities were imparted to the grains using manipulation laser pulses. Analysis (funded by another grant DE-SC0021146) is currently underway to develop a theoretical framework to describe multibody collisions analogous to classical two-body interactions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Topical Report on Water Balance Model Development and Initial Application

This topical report summarizes results from developing a generic dynamic water balance tool which can be used by coal-fired power plant operators to evaluate FGD water management strategies. EPRI is using a statistical software model created on the GoldSim platform and data from coal-fired energy plants to determine the fraction of power plant water needs that can be satisfied by electrodialysis reversal treatment and, correspondingly, the discharge volume and/or byproducts that still need to be managed. The generic model is designed to accept a number of easily obtainable process variables and generate probabilities of resultant water characteristics. The model is also constructed as a universal process flow; one that can be adjusted to accommodate most major components of an FGD blowdown handling system. The generic model is dynamic and utilizes user-inputted operational variation in water quality and quantity to best provide a probabilistic representation of potential performance outcomes. In order to account for complexities of water composition and treatment, a separate chemical modeling software is used to evaluate water chemistry and unit operation performance. The thermodynamic modeling software, OLI Studio, is employed to convert ion data from laboratory analyses into balanced molecular concentrations that are classified as dissolved and suspended solids. The dynamic water model is designed to import a total of 11 species commonly found in FGD blowdown water as molecular concentrations.Water management unit operations are used in the model and categorized by either physical unit operation blocks or chemical unit operations blocks. As the name implies, the physical water treatment blocks are unit operations that are exclusively physical changes to the system (e.g., separations and volume changes). The chemical water treatment blocks are unit operations where chemical changes occur and require the use of OLI Studio to characterize subsequent streams. Water and material balances from three unique coal-fired power plants were obtained and preliminary modeling on the dynamic water balance tool was performed using the extracted data from these power plants. These three power plants were chosen due to their unique configurations and water profiles that represented a variety of operational changes. Results from using the dynamic tool with the three plant configurations are presented and discussed in the context of the existing tool and planned future capabilities.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2021

Modeling dissociation of ionic liquids with electrolyte NRTL model

Dissociation of ionic liquids (ILs) is critical to electrochemical process performance by affecting ionic conductivity. Prior studies of thermodynamic modeling either assumed no dissociation or complete dissociation that were not consistent with experimental observations. This work presented an eNRTL model for three aqueous imidazolium-based IL systems: [Emim][EtSO 4 ], [Emim][TFA], and [Emim][TfO]. The model accurately correlates the IL dissociation and VLE data in the entire concentration range from pure IL to infinite dilution aqueous solution. The system non-ideality is dominated by the dissociation chemistry. Dissociation behavior is driven by strong short-range interaction of the molecular IL-water pair relative to the dissociated IL-water pair, consistent with prior studies indicating that molecular IL and water can form an energetically favorable complex. The interaction energy parameters calculated in this work qualitatively agrees with the hydrogen bonding ability of the anions previously reported. This research not only provides a model that well describes the IL dissociation but also demonstrates the physical significance of eNRTL model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Optimization of Desalination Systems with Detailed Water Chemistry through Integration of Reaktoro in WaterTAP

Chemistry predictions are critical for an accurate estimation of performance and costs in desalination process models, which allows for the estimation of the value of new technologies and the viability of treating new water sources. Herein, we present how an implicit function formulation can be used to integrate the chemical modeling package, Reaktoro, into the techno-economic assessment and modeling platform, WaterTAP. This approach resolves the critical issues of integrating large-scale thermodynamic models and databases into equation-oriented process models while allowing more flexibility relative to previously presented surrogate-based methods. We describe how this integration into Pyomo and WaterTAP models is implemented and used through the open-source package Reaktoro-PSE . We first validate this integration approach by performing optimization on a previously presented desalination treatment train with softening and acid addition as the pretreatment steps. Then, to demonstrate the value of this approach, we extend the cost-optimization problem to include the simultaneous addition of lime and soda ash for softening, and HCl and H 2 SO 4 in the acidification steps. Finally, we were able to confirm the previously established results that were obtained by using surrogate models and demonstrate that the implicit function approach enables exploration of different feedwater compositions and a larger number of chemicals and their combinations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2010

Z-Pinch Pulsed Plasma Propulsion Technology Development

Fusion-based propulsion can enable fast interplanetary transportation. Magneto-inertial fusion (MIF) is an approach which has been shown to potentially lead to a low cost, small reactor for fusion break even. The Z-Pinch/dense plasma focus method is an MIF concept in which a column of gas is compressed to thermonuclear conditions by an axial current (I approximates 100 MA). Recent advancements in experiments and the theoretical understanding of this concept suggest favorable scaling of fusion power output yield as I(sup 4). This document presents a conceptual design of a Z-Pinch fusion propulsion system and a vehicle for human exploration. The purpose of this study is to apply Z-Pinch fusion principles to the design of a propulsion system for an interplanetary spacecraft. This study took four steps in service of that objective; these steps are identified below. 1. Z-Pinch Modeling and Analysis: There is a wealth of literature characterizing Z-Pinch physics and existing Z-Pinch physics models. In order to be useful in engineering analysis, simplified Z-Pinch fusion thermodynamic models are required to give propulsion engineers the quantity of plasma, plasma temperature, rate of expansion, etc. The study team developed these models in this study. 2. Propulsion Modeling and Analysis: While the Z-Pinch models characterize the fusion process itself, propulsion models calculate the parameters that characterize the propulsion system (thrust, specific impulse, etc.) The study team developed a Z-Pinch propulsion model and used it to determine the best values for pulse rate, amount of propellant per pulse, and mixture ratio of the D-T and liner materials as well as the resulting thrust and specific impulse of the system. 3. Mission Analysis: Several potential missions were studied. Trajectory analysis using data from the propulsion model was used to determine the duration of the propulsion burns, the amount of propellant expended to complete each mission considered. 4. Vehicle Design: To understand the applicability of Z-Pinch propulsion to interplanetary travel, it is necessary to design a concept vehicle that uses it -- the propulsion system significantly impacts the design of the electrical, thermal control, avionics and structural subsystems of a vehicle. The study team developed a conceptual design of an interplanetary vehicle that transports crew and cargo to Mars and back and can be reused for other missions. Several aspects of this vehicle are based on a previous crewed fusion vehicle study -- the Human Outer Planet Exploration (HOPE) Magnetized Target Fusion (MTF) vehicle. Portions of the vehicle design were used outright and others were modified from the MTF design in order to maintain comparability.

Polsgrove, Tara↗
DOE OSTI2022

Uncertainty propagation in pore water chemical composition calculation using surrogate models

Performance assessment in deep geological nuclear waste repository systems necessitates an extended knowledge of the pore water chemical conditions prevailing in host-rock formations. In the last two decades, important progress has been made in the experimental characterization and thermodynamic modeling of pore water speciation, but the influence of experimental artifacts and uncertainties of thermodynamic input parameters are seldom evaluated. In this respect, we conducted an uncertainty propagation study in a reference geochemical model describing the pore water chemistry of the Callovian-Oxfordian clay formation. Nineteen model input parameters were perturbed, including those associated to experimental characterization (leached anions, exchanged cations, cation exchange selectivity coefficients) and those associated to generic thermodynamic databases (solubilities). A set of 13 quantities of interest were studied by the use of polynomial chaos expansions built non-intrusively with a least-squares forward stepwise regression approach. Training and validation sets of simulations were carried out using the geochemical speciation code PHREEQC. The statistical results explored the marginal distribution of each quantity of interest, their bivariate correlations as well as their global sensitivity indices. The influence of the assumed distributions for input parameters uncertainties was evaluated by considering two parametric domain sizes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2006

The Effect of the Saharan Air Layer on the Formation of Hurricane Isabel (2003) Simulated with AIRS Data

The crucial physics of how the atmosphere really accomplishes the tropical cyclogenesis process is still poorly understood. The presence of the Saharan Air Layer (SAL), an elevated mixed layer of warm and dry air that extends from Africa to the tropical Atlantic and contains a substantial amount of mineral dust, adds more complexity to the tropical cyclogenesis process in the Atlantic basin. The impact of the SAL on tropical cyclogenesis is still uncertain. Karyampudi and Carlson (1988) conclude that a strong SAL can potentially aid tropical cyclone development while Dunion and Velden (2004) argue that the SAL generally inhibits tropical cyclogenesis and intensification. Advancing our understanding of the physical mechanisms of tropical cyclogenesis and the associated roles of the SAL strongly depends on the improvement in the observations over the data-sparse ocean areas. After the Atmospheric Infrared Sounder (AIRS), the Advanced Microwave Sounding Unit (AMSU), and the microwave Humidity Sounder of Brazil (HSB) were launched with the NASA Aqua satellite in 2002, new data products retrieved from the AIRS suite became available for studying the effect of the warm, dry air mass associated with the SAL (referred to as the thermodynamic effect). The vertical profiles of the AIRS retrieved temperature and humidity provide an unprecedented opportunity to examine the thermodynamic effect of the SAL. The observational data can be analyzed and assimilated into numerical models, in which the model thermodynamic state is allowed to relax to the observed state from AIRS data. The objective of this study is to numerically demonstrate that the thermodynamic effect of the SAL on the formation of Hurricane Isabel (2003) can be largely simulated through nudging of the AIRS data.

Wu, iguang↗
DOE OSTI2023

Thermodynamic re-modeling of the Yb-Sb system aided by first-principles calculations

Here, the thermodynamic description of the Yb-Sb binary system is developed by means of the CALculations of PHAse Diagrams (CALPHAD) method by combining experimental data in the literature and predictions from first-principles calculations based on density functional theory (DFT) in the literature and the present work. Two pseudopotentials of Yb are compared in the present DFT-based calculations with 14 and 13 f-electrons frozen in the core, i.e., 5p 6 6s 2 and 5p 6 6s 2 5 d 1 electrons as valence electrons, termed Yb_2 and Yb_3, respectively. It is shown that the phonon spectrum of the YbSb phase calculated using the Yb_3 pseudopotential does not have imaginary phonon modes and is subsequently used to predict its temperature dependent thermodynamic properties by the DFT-based quasiharmonic phonon calculations. The present thermodynamic database includes the Yb 16 Sb 11 phase in addition to five intermetallic phases that were considered in previous modeling studies, i.e., YbSb 2 , YbSb, Yb 11 Sb 10 , Yb 4 Sb 3 , and Yb 5 Sb 3 . The high temperature orthorhombic structure of the Yb 5 Sb 3 phase is not considered in the present work as it was stabilized by hydrogen. The associate solution model is used to describe the short-range ordering behavior in the liquid phase. The calculations from the present thermodynamic model show good agreement with thermochemical and phase equilibrium data from both the present work and the literature.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A purely kinetic description of the evaporation of water droplets

The process of water evaporation, although deeply studied, does not enjoy a kinetic description that captures known physics and can be integrated with other detailed processes such as drying of catalytic membranes embedded in vapor-fed devices and chemical reactions in aerosol whose volumes are changing dynamically. In this work, we present a simple, three-step kinetic model for water evaporation that is based on theory and validated by using well-established thermodynamic models of droplet size as a function of time, temperature, and relative humidity as well as data from time-resolved measurements of evaporating droplet size. Additionally, the kinetic mechanism for evaporation is a combination of two limiting processes occurring in the highly dynamic liquid-vapor interfacial region: direct first order desorption of a single water molecule and desorption resulting from a local fluctuation, described using third order kinetics. The model reproduces data over a range of relative humidities and temperatures only if the interface that separates bulk water from gas phase water has a finite width, consistent with previous experimental and theoretical studies. The influence of droplet cooling during rapid evaporation on the kinetics is discussed; discrepancies between the various models point to the need for additional experimental data to identify their origin.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRSDate not supplied

Hybrid NEP-Chemical Vehicle and Propulsion Technology Study for Crewed Mars Missions

Nuclear Electric Propulsion (NEP) is a suite of technologies with the potential to enable crewed opposition-class missions to Mars. Each subsystem comprising an NEP system has multiple technology options that present tradeoffs in vehicle sizing and technology development risk. Multiple vehicle concepts have been studied in the past and are currently being studied at NASA. Three models have been developed to illustrate the impact of key technology parameters on overall sizing for a crewed Mars transportation vehicle. Vehicle mass required to close the mission as a function of NEP system alpha (kWe/kg) and specific impulse (Isp) is estimated with a detailed trajectory model. A power system mass model estimates alpha as a function of power and radiator mass assumption. A power conversion system thermodynamic model predicts the radiator area required to close a Brayton cycle power conversion system. Combined with the architecture mass required for mission closure, the radiator area and alpha model provide insight into how technology development may impact the mission. Our focus is on parametric sweeps of the whole design space rather than any particular point design. Results from the mission model comparing electric propulsion technology (Hall, Ion, Magnetoplasmadynamic) and both 2039 and 2042 opposition-class mission launch windows are included. The results of the study illustrate the technology parameters that can result in mission closure and illustrate where the architecture is sensitive to variations in technology performance or requirements.

Matthew Duchek↗
NASA NTRS1992

Modeling and control study of the NASA 0.3-meter transonic cryogenic tunnel for use with sulfur hexafluoride medium

The NASA Langley 0.3-m Transonic Cryogenic Tunnel is to be modified to operate with sulfur hexafluoride gas while retaining its present capability to operate with nitrogen. The modified tunnel will provide high Reynolds number flow on aerodynamic models with two different test gases. The document details a study of the SF6 tunnel performance boundaries, thermodynamic modeling of the tunnel process, nonlinear dynamical simulation of math model to yield tunnel responses, the closed loop control requirements, control laws, and mechanization of the control laws on the microprocessor based controller.

Balakrishna, S.↗
NASA NTRS2011

Z-Pinch Magneto-Inertial Fusion Propulsion Engine Design Concept

Fusion-based nuclear propulsion has the potential to enable fast interplanetary transportation. Due to the great distances between the planets of our solar system and the harmful radiation environment of interplanetary space, high specific impulse (Isp) propulsion in vehicles with high payload mass fractions must be developed to provide practical and safe vehicles for human spaceflight missions. Magneto-Inertial Fusion (MIF) is an approach which has been shown to potentially lead to a low cost, small fusion reactor/engine assembly (1). The Z-Pinch dense plasma focus method is an MIF concept in which a column of gas is compressed to thermonuclear conditions by an estimated axial current of approximately 100 MA. Recent advancements in experiments and the theoretical understanding of this concept suggest favorable scaling of fusion power output yield as I(sup 4) (2). The magnetic field resulting from the large current compresses the plasma to fusion conditions, and this is repeated over short timescales (10(exp -6) sec). This plasma formation is widely used in the field of Nuclear Weapons Effects (NWE) testing in the defense industry, as well as in fusion energy research. There is a wealth of literature characterizing Z-Pinch physics and existing models (3-5). In order to be useful in engineering analysis, a simplified Z-Pinch fusion thermodynamic model was developed to determine the quantity of plasma, plasma temperature, rate of expansion, energy production, etc. to calculate the parameters that characterize a propulsion system. The amount of nuclear fuel per pulse, mixture ratio of the D-T and nozzle liner propellant, and assumptions about the efficiency of the engine, enabled the sizing of the propulsion system and resulted in an estimate of the thrust and Isp of a Z-Pinch fusion propulsion system for the concept vehicle. MIF requires a magnetic nozzle to contain and direct the nuclear pulses, as well as a robust structure and radiation shielding. The structure, configuration, and materials of the nozzle must meet many severe requirements. The configuration would focus, in a conical manner, the Deuterium-Tritium (D-T) fuel and Lithium-6/7 liner fluid to meet at a specific point that acts as a cathode so the Li-6 can serve as a current return path to complete the circuit. In addition to serving as a current return path, the Li liner also serves as a radiation shield. The advantage to this configuration is the reaction between neutrons and Li-6 results in the production of additional Tritium, thus adding further fuel to the fusion reaction and boosting the energy output. To understand the applicability of Z-Pinch propulsion to interplanetary travel, it is necessary to design a concept vehicle that uses it. The propulsion system significantly impacts the design of the electrical, thermal control, avionics, radiation shielding, and structural subsystems of a vehicle. The design reference mission is the transport of crew and cargo to Mars and back, with the intention that the vehicle be reused for other missions. Several aspects of this vehicle are based on a previous crewed fusion vehicle study called Human Outer Planet Exploration (HOPE), which employed a Magnetized Target Fusion (MTF) propulsion concept. Analysis of this propulsion system concludes that a 40-fold increase of Isp over chemical propulsion is predicted. This along with a greater than 30% predicted payload mass fraction certainly warrants further development of enabling technologies. The vehicle is designed for multiple interplanetary missions and conceivably may be suited for an automated one-way interstellar voyage.

Miernik, Janie H.↗
DOE OSTI2023

A Landau-Devonshire Approach of Elastic Strain Effects on Ferroelectric Al1-xScxN

Landau-Devonshire thermodynamic modeling enables the phenomenological description of ferroelectrics. 1 The approach has been validated across a wide range of ferroelectric materials from the first ferroelectric discovered, Rochelle Salt, to recent HfO2-based materials. 2-4 Extension to what is now referred to as the Landau-Ginsburg-Devonshire model enables rigorous investigation of polarization boundaries and reorientation, phase transformations, and domain formation/evolution. We present a thermodynamic analysis of the recently discovered nitride ferroelectric materials 5-7 using the classic Landau-Devonshire approach. The electrostrictive and dielectric stiffness coefficients of Al1-xScxN with wurtzite structure (6mm) are determined using a free energy density function assuming a hexagonal parent phase (6/mmm), with the first order phase transition based on the dielectric stiffness relationships (Fig. 1). The results of this analysis show that the strain sensitivity of the energy barrier is one order of magnitude larger than that of the spontaneous polarization in these wurtzite ferroelectrics, yet both are less sensitive to strain compared to classic perovskite ferroelectrics (Fig. 2). These analysis results reported here explain experimentally reported sensitivity of coercive field to elastic strain/stress in Al1-xScxN films, and would enable further thermodynamic analysis via phase field simulation and related methods.

CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS↗
DOE OSTI2021

A New Modeling Framework for Geothermal Operational Optimization with Machine Learning (GOOML)

Geothermal power plants are excellent resources for providing low carbon electricity generation with high reliability. However, many geothermal power plants could realize significant improvements in operational efficiency from the application of improved modeling software. Increased integration of digital twins into geothermal operations will not only enable engineers to better understand the complex interplay of components in larger systems but will also enable enhanced exploration of the operational space with the recent advances in artificial intelligence (AI) and machine learning (ML) tools. Such innovations in geothermal operational analysis have been deterred by several challenges, most notably, the challenge in applying idealized thermodynamic models to imperfect as-built systems with constant degradation of nominal performance. This paper presents GOOML: a new framework for Geothermal Operational Optimization with Machine Learning. By taking a hybrid data-driven thermodynamics approach, GOOML is able to accurately model the real-world performance characteristics of as-built geothermal systems. Further, GOOML can be readily integrated into the larger AI and ML ecosystem for true state-of-the-art optimization. This modeling framework has already been applied to several geothermal power plants and has provided reasonably accurate results in all cases. Therefore, we expect that the GOOML framework can be applied to any geothermal power plant around the world.

15 GEOTHERMAL ENERGY↗
DOE OSTI2020

Uncertainty Quantification in Atomistic Modeling of Metals and Its Effect on Mesoscale and Continuum Modeling: A Review

The design of next-generation alloys through the integrated computational materials engineering (ICME) approach relies on multiscale computer simulations to provide thermodynamic properties when experiments are difficult to conduct. Atomistic methods such as density functional theory (DFT) and molecular dynamics (MD) have been successful in predicting properties of never before studied compounds or phases. However, uncertainty quantification (UQ) of DFT and MD results is rarely reported due to computational and UQ methodology challenges. Over the past decade, studies that mitigate this gap have emerged. These advances are reviewed in the context of thermodynamic modeling and information exchange with mesoscale methods such as the phase-field method (PFM) and calculation of phase diagrams (CALPHAD). The importance of UQ is illustrated using properties of metals, with aluminum as an example, and highlighting deterministic, frequentist, and Bayesian methodologies. Finally, challenges facing routine uncertainty quantification and an outlook on addressing them are also presented.

36 MATERIALS SCIENCE↗
DOE OSTI2022

SAXS-guided unbiased coarse-grained Monte Carlo simulation for identification of self-assembly nanostructures and dimensions

Recent studies have shown that solvated amphiphiles can form nanostructured self-assemblies called dynamic binary complexes (DBCs) in the presence of ions. Since the nanostructures of DBCs are directly related to their viscoelastic properties, it is important to understand how the nanostructures change under different solution conditions. However, it is challenging to obtain a three-dimensional molecular description of these nanostructures by utilizing conventional experimental characterization techniques or thermodynamic models. To this end, we combined the structural data from small angle X-ray scattering (SAXS) experiments and thermodynamic knowledge from coarse-grained Monte Carlo (CGMC) simulations to identify the detailed three-dimensional nanostructure of DBCs. Specifically, unbiased CGMC simulations are performed with SAXS-guided initial conditions, which aids us to sample accurate nanostructures in a computationally efficient fashion. As a result, an elliptical bilayer nanostructure is obtained as the most probable nanostructure of DBCs whose dimensions are validated by scanning electron microscope (SEM) images. Then, utilizing the obtained molecular model of DBCs, here we could also explain the pH tunability of the system. Overall, our results from SAXS-guided unbiased CGMC simulations highlight that using potential energy combined with SAXS data, we can distinguish otherwise degenerate nanostructures resulting from the inherent ambiguity of SAXS patterns.

36 MATERIALS SCIENCE↗
DOE OSTI2026

From molecular to macroscopic: predicting liquid–liquid phase equilibria and small-angle scattering of mixtures of organic liquids from atomistic simulation using Kirkwood–Buff theory

Macroscopic phase equilibria between solutions define the functionality of many biological and industrial processes, yet they are challenging to predict due to the inherent complexity of liquids containing large molecules. This work introduces an approach for the purely predictive calculation of such phase equilibria in temperature-composition space from molecular dynamics (MD) simulations at one temperature in the single-phase region. We use an approach developed previously to obtain the entropic and enthalpic contributions to the free energy of mixing from the atomic-scale information given by MD simulations via Kirkwood–Buff theory. This allows us to accurately estimate the free energy of mixing as a function of temperature, and thus obtain liquid–liquid phase equilibria, including liquid–liquid critical points, associated binodal and spinodal lines, and composition fluctuations across a region of temperature and composition. Results for binary malonamide–alkane systems are validated by comparison to a direct experimental probe of the fluctuations: the small angle X-ray scattering intensity near zero wavenumber. The MDKB → Phase method demonstrated here provides a significant improvement in predicting liquid–liquid equilibria and free energy as a function of temperature for our systems of interest compared to conventional thermodynamic models. The accurate performance of this purely predictive approach lies in its preservation of atomistic details when determining thermodynamic properties. Furthermore, its inherent extensibility to multi-component systems will likely make the MDKB → Phase approach a valuable general tool for connecting molecular interactions to macroscopic phase equilibria and for the computational screening of materials for targeted thermodynamic behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1990

Exclusive measurements of light fragment production at forward angles in Ne-Pb and Ne-NaF collisions at E/A=400 MeV and 800 MeV

Emission of light fragments at small angles is studied in relativistic heavy ion collisions using the Diogene plastic wall for both symmetrical and non-symmetrical target-projectile systems with 400 MeV per nucleon and 800 MeV per nucleon incident neon nuclei. Efficiency of multiplicity measurements in the small angle range for the selection of central or peripheral collisions is confirmed for asymmetric systems. Differential production cross sections of Z = 1 fragments show evidence for the existence of two emitting sources. The apparent temperature of each source is obtained from comparison with a thermodynamical model.

NASA Discipline Number 04-10↗