Search NASA⌕ Search

SEARCH · Search NASA

Results for “Transition metal oxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Heterostructured Lepidocrocite Titanate-Carbon Nanosheets for Electrochemical Applications

Lepidocrocite-type titanates that reversibly intercalate sodium ions at low potentials (~0.6 V vs Na/Na + ) are promising anode candidates for sodium-ion batteries. However, large amounts of carbon additives are often used to improve their electrical conductivity and overcome poor cycling performance in the electrode composites. To ameliorate electronic transport issues of lepidocrocite titanate (K 0.8 Ti 1.73 Li 0.27 O 4 , KTL) in sodium-ion batteries, we have designed and synthesized heterostructures of exfoliated lepidocrocite-type titanium oxide (LTO) nanosheets with alternating carbon layers via a solution-based self-assembly approach. Positively charged dopamine (Dopa) was used as the carbon precursor and intercalated between negatively charged exfoliated titania nanosheets through electrostatic interaction. Dopa-intercalated LTO was then annealed under argon to form conductive carbon layers between titania sheets. The carbon content in the heterostructures was controlled by modifying the self-assembly conditions (i.e., pH, stirring duration, and Dopa-to-LTO ratio). Electrodes were prepared using carbonized heterostructures (LTO-C) without adding more carbon to the composites and tested in sodium half-cell configurations. Further, higher capacities and improved capacity retention over 250 cycles and lower impedance were observed, as the carbon content of LTO-C heterostructures was increased from 0% (LTO nanosheets) to 30%. These results indicate that the self-assembly approach for 2D heterostructured electrode materials is a promising strategy to overcome electronic transport limitations of layered transition-metal oxides and improve their electrochemical performance for next-generation energy storage applications.

25 ENERGY STORAGE↗
DOE OSTI2020

Synthesis, Crystal Structure, and Cooperative 3d–5d Magnetism in Rock Salt Type Li 4 NiOsO 6 and Li 3 Ni 2 OsO 6

Two new transition metal oxides with the nominal chemical compositions of Li 4 NiOsO 6 and Li 3 Ni 2 OsO 6 were successfully synthesized. Both compounds crystallize in an ordered rock salt structure type in the monoclinic C2/m space group. The crystal structures were determined using both synchrotron X-ray and time-of-flight neutron, powder diffraction data. In both phases, Ni2+ ions are present while oxidation states of osmium are +6 and +5 in Li 4 NiOsO 6 and Li 3 Ni 2 OsO 6 , respectively. Ni2+ ions in the hypothetical fully ordered phase form a honeycomb arrangement in the ab crystallographic plane and these hexagons are centered by osmium ions. Furthermore, the magnetic layers are separated along the c axis by the octahedra, which are centered by Li+ (or Li+/Ni 2+ , depending on the chemical compositions). Crystal structure refinements reveal that there is some degree of mixed occupancy in cationic positions. Temperature dependent magnetic susceptibility data for both phases show ferrimagnetic transitions with predominant antiferromagnetic (AFM) interactions among 3d electrons of nickel and Sd electrons of osmium. Iso-thermal magnetization loops as a function of the applied magnetic field below the transition temperatures confirm the ferrimagnetic nature in magnetic transitions. Temperature dependent heat capacity data, however, did not exhibit any anomaly in either phase, indicating the absence of long-range magnetic ordering. The lack of long-range order for both Os 5+ and Os 6+ -based compounds was also confirmed by low temperature neutron diffraction data down to 10 K. Temperature dependent AC magnetic susceptibility data in various frequencies for both samples indicate that Li 4 NiOsO 6 exhibits spin-glass-like behavior, while the transition temperature for Li 3 Ni 2 OsO 6 is nearly frequency independent.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Impact of Stabilizing Cations on Lithium Intercalation in Tunneled Manganese Oxide Cathodes

Stabilizing cations such as K + , Ba 2+ , and Ag + are known to provide charge neutrality and enhance structural stability in low-cost tunneled manganese dioxide (MnO 2 ) cathodes for Li ion batteries. However, a fundamental understanding of the role of these cations in the electrochemical performance of tunneled MnO 2 cathodes remains unclear, especially at low stabilizing cation concentrations. Here, we employ density functional theory (DFT + U) calculations to reveal the impact of stabilizing potassium cation (K + ) concentration on the structural stability, electronic properties, and kinetics of lithium transport in 2 x 2 tunneled manganese oxide (α-K y Mn 8 O 16 , at y = 0, 1, and 2) battery cathodes during lithium intercalation. Specifically, we provide insights into the effect of K + ions on several critical factors governing the electrochemical storage performance of tunneled MnO2 cathodes, including (a) energetically favorable Li+ host sites, (ii) Li + and electron transport capabilities, (iii) optimal intercalation pathways, crystal distortion, microstructural stability, and tunneled-to-layer phase transformation as a function of lithium content, and (iv) cell output voltage profile. Interestingly, we find that low K + concentrations (y ≤ 1) yield partially cation-deficient tunnels in the MnO 2 cathode. Such unique tunnel structures in the cathode enable (a) low kinetic barriers for Li transport, (b) excellent thermodynamic stability of the tunneled structure even at a high Li + loading (up to ~ 0.625 Li/Mn), and (c) good electronic conductivity facilitated by Jahn-Teller distortions; all of which are critical for achieving high capacity batteries with enhanced rate capability. Additionally, these results provide perspectives to design low-cost transition metal oxide cathodes for high-performance Li-ion batteries with excellent cycle life.

25 ENERGY STORAGE↗
DOE OSTI2020

Time-Resolved Spectroscopy of Insulator-Metal Transitions: Exploring Low-Energy Dynamics in Strongly Correlated Systems. Final Report

Transition metal oxides (TMOs) have attracted much attention in recent years. The strong coupling between charge, spin, and orbital degrees of freedom creates novel functional properties. The research at the interplay between ferromagnetism, ferroelectricity and conductivity provides a promising way to the development of future spintronic devices. The interface characterization of multifunctional oxide heterostructures is crucial to understand deeply the magnetic response, spin injection and spin transport. In year one, we characterized optically the magnetic property with the method of magnetization-induced second-harmonic generation (MSHG), which is a sensitive technique to selectively probe the interface where the spatial inversion symmetry is broken. The interface of n-type BaTiO 3 (BTO)/La 0.67 Sr 0.33 MnO 3 (LSMO) forms a Schottky barrier and displays a good diode effect. By applying an external electric field across the sample, we observe the magnetoelectric (ME) coupling effect to modulate the interface magnetization. The voltage dependent magnetic contrast sharply vanishes at positive voltage (applied to LSMO contact) and reveals a ferromagnetic (FM)-to- antiferromagnetic (AFM) transition occurring at the interface, while the magneto-optic Kerr effect (MOKE) indicates that the bulk property is not affected. The strain mediated mechanism and ferroelectric (FE) polarization induced charge medicated mechanism are both discussed, but they do not play an important role in the observed magnetization transition. A new mechanism is proposed - the injected minority spins through strong Hund's interaction with the local magnetic moments at positive voltage weaken the double-exchange interaction of nearby Mn e g electrons, thereby reducing the ferromagnetic (FM) ordering. The dominant superexchange interaction of localized t 2g electrons finally leads to the AFM configuration. By reducing the electron carrier concentration of BTO, a positive voltage shift of the transition is observed. The oxygen richer sample with lower carrier concentration requires a higher voltage to increase the hole doping level of LSMO to induce the interfacial AFM phase. By inserting a thin (1nm) La 0.5 Ca 0.5 MnO 3 layer between BTO and LSMO, the interface magnetic response from LSMO is enhanced. In year two, a non-multiferroic heterostructure SrTiO 3 (STO)/ La 0.5 Ca 0.5 MnO 3 (LCMO)/La 0.67 Sr 0.33 MnO 3 (LSMO) was studied. In this system, the interface FM-AFM transition is observed at negative voltage. The STO layer may act as a hole-donating layer, which induces the hole transfer to LSMO making it overdoped, while the LCMO interlayer at the 0.5 hole doping level displays complicated CE type AFM phase. Thus the AFM phase is dominant at the interface and electron accumulation is required to induce the FM phase by applying a negative voltage. For oxygen rich sample, the magnetic MSHG loop reappears at high positive voltage (around +2.5 V). At high doping level (x > 0.5), LSMO exhibits A-type AFM order, consisting of AFM superexchange coupling between adjacent layers and intralayer FM double-exchange coupling. The less tensile strain of STO and LSMO due to a smaller lattice mismatch as compared to BTO would result in a weaker interlayer coupling . Thus, interfacial A-type AFM order can occur in STO/LCMO/LSMO heterostructure at high hole doping concentration. The study of ME coupling of multifunctional oxide heterostructures is definitely important to the development and performance of future spintronic devices. The results presented here regarding the interfacial magnetic transition controlled by an external electric field offer some new perspective to study the spin transport of magnetic tunnel junctions.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Confinement of Lewis Acid–Base Sites by Microporous Silica Layers on Titania for Enhanced Alkanol Dehydration Reactivity

Alkanol dehydration offers a pathway to upgrade biomass-derived short-chain oxygenates into alkenes, essential chemical building blocks widely used in industrial applications. Transition metal oxides with Lewis acid-base site pairs are attractive catalysts due to their high reactivity and cost-effectiveness. This work demonstrates a synthetic pathway to manipulate local environments around active Lewis acid-base pairs in anatase TiO 2 to enhance their reactivity in alkanol dehydration. Microporous SiO 2 layers with an average pore diameter of ~0.6 nm and a controlled thickness of 0.8-33 nm are deposited on anatase TiO 2 powders by using a molecular templated SiO 2 deposition method. The Lewis acid-base strength of accessible Ti-O pairs remains unchanged, as shown by temperature-programmed surface reactions of surface-bound formic acid-derived species and temperature-programmed desorption of pyridine. However, measured alkanol dehydration rates on confined Ti-O pairs are much higher (by up to 7-fold) than those on TiO 2 . The extent of rate enhancements depends on the reactant size and functional group positioning, suggesting that the rate enhancements reflect the interactions between the guest molecules (reactants and transition states) and the surrounding SiO 2 micropore environments. By providing a detailed synthetic procedure to tailor the local environments around active sites in bulk oxides, this approach offers an additional avenue for enhancing catalytic performance.

09 BIOMASS FUELS↗
DOE OSTI2026

Lattice-Charge Coupling in a Trilayer Nickelate with Intertwined Density Wave Order

Intertwined charge and spin correlations are ubiquitous in a wide range of transition metal oxides and are often perceived as intimately related to unconventional superconductivity. Theoretically envisioned as driven by strong electronic correlations, the intertwined order is usually found to be strongly coupled to the lattice as signaled by pronounced phonon softening. Recently, both charge and spin density waves (CDW and SDW) and superconductivity have been discovered in several Ruddlesden-Popper (RP) nickelates, in particular trilayer nickelates 𝑅⁢𝐸 4⁢ Ni 3 ⁢O 10 (𝑅⁢𝐸 = Pr, La). The nature of the intertwined order and the role of lattice-charge coupling are at the heart of the debate about these materials. Using inelastic x-ray scattering, we mapped the low-energy phonon dispersions in 𝑅⁢𝐸 4⁢ Ni 3 ⁢O 10 and found no evidence of softening near the CDW wave vector over a wide temperature range, which contrasts with the pronounced anomalies frequently observed in cuprate superconductors. Calculations of the electronic susceptibility revealed a peak at the observed SDW ordering vector but not at the CDW wave vector. Our experimental and theoretical findings highlight the crucial role of the spin degree of freedom and establish a foundation for understanding the interplay between superconductivity and density-wave transitions in RP nickelate superconductors and beyond.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Hopping frustration-induced flat band and strange metallicity in a kagome metal

The introduction of localized electronic states into a metal can alter its physical properties, for example enabling exotic metal physics including heavy fermion and strange metal behaviour. A common source of localized states in such systems are partially filled 4f and 5f shells because of the inherently compact nature of those orbitals. The interaction of electrons in these orbitals with the conduction sea is well described by the Kondo framework. However, there have also been observations of Kondo-like behaviour in 3d transition metal oxides and in 4d- and 5d-containing van der Waals heterostructures. This calls for a broader consideration of the physical requirements for Kondo systems. Here we show transport and thermodynamic hallmarks of heavy fermion and strange metal behaviour that arise in the kagome metal Ni3In, wherein the source of localized states is destructive interference-induced band flattening of partially filled Ni 3d states. With magnetic field and pressure tuning, here we also find evidence that the system is proximate to quantum criticality, extending the analogy to f-electron Kondo lattices. These observations highlight the role of hopping frustration in metallic systems as a potential source for strong correlations. Additionally, this suggests a lattice-driven approach to realizing correlated metals with non-trivial band topology.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Elucidation of Active Sites in Aldol Condensation of Acetone over Single-Facet Dominant Anatase TiO 2 (101) and (001) Catalysts

Aldol condensations of carbonyl compounds for C–C bond formation are a very important class of reactions in organic synthesis and upgrading of biomass-derived feedstocks. However, the atomic level understanding of reaction mechanisms and structure-activity correlation on widely used transition metal oxide catalysts are limited due to the high degree of struc-tural heterogeneity of catalysts such as commercial TiO 2 powders. Here, we provide a deep understanding of the reaction mechanisms, kinetics, and structure–function relationships for vapor phase acetone aldol condensation through the con-trolled synthesis of two catalysts with high surface areas and clean, dominant facets, coupled with detailed characterization and kinetic studies that are further assisted by density functional theory (DFT) calculations. Temperature-dependent diffuse reflectance infrared Fourier transform spectroscopy showed the existence of abundant acetone bonded to surface hydroxyl groups (acetone-O s H) and acetone bonded to Lewis acid sites (acetone-Ti 5c ) on surface of both {101} and {001} facet dom-inant TiO 2 . Intermolecular C–C coupling of enolate intermediate from acetone-Ti 5c and a vicinal acetone-O s H is a kinetically relevant step, which is consistent with kinetic and isotopic studies and DFT calculations. The {001} facet showed a lower apparent activation energy (or higher reactivity) than the {101} facet. This is likely caused by the weaker Lewis acid and Brønsted base strengths of the {001} facet which favors the reprotonation–desorption of the coupled intermediate, making the C–C coupling step more exothermic on the {001} facet and resulting in an earlier transition state with a lower activation barrier. It is also possible that the {001} facet has a smoother surface configuration and less steric hindrance during intermo-lecular C–C bond formation than the {101} facet.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Single Crystalline Na 0.67 Ni 0.33 Mn 0.67 O 2 Positive Electrode Material via Molten Salt Synthesis for Sodium Ion Batteries

P2-layered Na 0.67 Ni 0.33 Mn 0.67 O 2 (NNMO) has emerged as a promising positive electrode material for sodium ion batteries due to its appealing electrochemical properties. Synthesis of polycrystalline NNMO (PC-NNMO) materials through conventional calcination of solid precursors remains the prevailing method, where heating occurs in a dry environment with air or O 2 . On the other hand, the molten salt method, where precursors are submerged in molten salt medium during calcination, emerged in recent years to be a scalable technique for more controlled crystal growth and uniform morphology in a variety of materials. Here, we utilize the molten salt method to synthesize single crystalline NNMO (SC-NNMO) materials with enhanced electrochemical properties. The SC-NNMO material exhibits an initial specific discharge capacity of 95 mAh g –1 at a 0.1C rate, retaining approximately 88.5% of its capacity after 100 cycles over a wide voltage range of 2.0–4.2 V. Furthermore, SC-NNMO maintains a capacity retention of 83.9% after 300 cycles at a 1C rate compared to 66.6% for PC-NNMO, indicating excellent long-term cycling stability. This stability is further confirmed by the performance of an SC-NNMO//hard carbon full cell, which retains 90.3% of its capacity after 200 cycles at 1C within a voltage window of 1.9–4.1 V. The enhancement in stability of the SC-NNMO sample is attributed to the single crystalline structure suppressing the undesired P2–O2 phase transition at high voltage. This study also presents an easy, efficient, and straightforward molten salt process for SC-NNMO material synthesis, offering valuable insights into the potential application of such methodology for the large-scale, cost-effective production of various sodium-layered transition metal oxide positive electrode materials for SIBs.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Determining the Oxygen Stoichiometry of Cobaltite Thin Films

Transition metal oxides (TMO) are promising materials to realize low-power neuromorphic devices. Their physical properties critically depend on their oxygen vacancy concentrations, whose experimental determination remains a challenging task. Here we focus on cobaltites, in particular La 1-x Sr x CoO 3-d (LSCO), and we present a strategy to identify fingerprints of oxygen vacancies in X-ray absorption (XA) spectra. Using a combination of experiment and theory, we show that the variation of the oxygen vacancy concentration in the perovskite phase of LSCO is correlated with the change of the relative peak positions of the O K-edge XA spectra. Furthermore, we also identify an additional geometrical fingerprint that captures both the changes of the Co-O bond length and Co-O-Co bond angle in the material due to the presence of oxygen vacancies. Finally, we predict the oxygen vacancy concentration of experimental samples and show how the resistivity of the oxide material may be tuned as a function of the defect concentration present in the system.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Interactions Enhance Ramp Reversal Memory in Locally Phase Separated Materials

The ramp-reversal memory (RRM) effect in metal–insulator transition metal oxides (TMOs), a non-volatile resistance change induced by repeated temperature cycling, has attracted considerable interest in neuromorphic computing and non-volatile memory devices. Our previous defect motion model successfully explained RRM in vanadium dioxide (VO 2 ), capturing observed critical temperature shifts and memory accumulation throughout the sample. However, this approach lacked interactions between metallic and insulating domains. Here, we extend our model by combining a correlated Random Field Ising Model with defect diffusion-segregation, enabling accurate hysteresis modeling while predicting the relationship between RRM and domain interactions. Our simulations demonstrate that the maximum RRM occurs when the turnaround temperature approaches the inflection point. This peak in RRM vs. turnaround temperature is consistent with prior transport measurements, as well as our own optical measurements reported here. Significantly, we find that increasing nearest-neighbor interactions enhances the maximum memory effect, thus providing a clear mechanism for optimizing RRM performance. Since our model employs minimal assumptions, we predict that RRM should be a widespread phenomenon in materials exhibiting patterned phase coexistence of electronic domains. This work not only advances fundamental understanding of memory behavior in TMOs but also establishes a much-needed theoretical framework for optimizing device applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Electrically‐Driven Metal‐Insulator Transitions Emerging from Localizing Current Density and Temperature

Negative differential resistance (NDR) is a key electronic response enabling two‐terminal artificial neurons that can be achieved through different physical phenomena, including phase‐homogeneous current density and temperature (electro‐thermal) localizations and spatially‐localized metal‐insulator phase transitions (MITs). These two effects have been observed to occur sequentially in select electrically‐biased transition metal oxides. However, it is unknown why and under what conditions localizing behaviors precede MITs, particularly as a function of device length scale. To this end, the interplay between phase‐homogeneous electro‐thermal localizations and MITs is investigated in a 3D multiphysics simulation of a lateral thin film device, using the material properties of the prototype MIT material VO 2 . These findings demonstrate that the MIT is nucleated through dynamically localizing current density and temperature. A critical device width (≈0.7 µm in this study) is identified, below which both the electrically‐induced electro‐thermal and phase inhomogeneities cease to appear. It is demonstrated that the formation of spatial inhomogeneities directly relates to device dimensions, and demonstrate the decoupling of NDR from the MIT through device scaling relationships. These results provide insight into the material phenomena underlying the material's electrical responses, clarifying conditions under which spatial inhomogeneities form in electrically‐biased MIT materials.

artificial neuron↗
DOE OSTI2022

Oxygen Evolution Reaction in Alkaline Environment: Material Challenges and Solutions

Abstract The oxygen evolution reaction (OER) generally exists in electrochemistry‐enabled applications that are coupled with cathodic reactions like hydrogen evolution, carbon dioxide reduction, ammonia synthesis, and electrocatalytic hydrogenation. The OER heavily impacts the overall energy efficiency of these devices because the sluggish OER kinetics result in a huge overpotential, thus, a large amount of efficient catalysts are needed. The benchmark iridium and ruthenium (Ir/Ru)‐based materials (mostly used in acid media) are, however, significantly limited by their scarcity. Non‐precious metal‐based catalysts (NPMCs) have emerged as the most promising alternatives; however, they tend to degrade quickly under the harsh operating conditions of typical OER devices. Another challenge is the unsatisfying performance of OER catalysts when integrated in real‐world devices. Herein, the OER active sites for three mainstream types of NPMCs including non‐precious transition metal oxides/(oxy)hydroxides, metal‐free carbon materials, and hybrid non‐precious metal and carbon composites are reviewed. In addition, possible degradation mechanisms for active sites and mitigation strategies are discussed in detail. This review also provides insights into the gaps between R&D of NPMCs for the OER and their applications in practical devices.

Xie, Xiaohong↗
DOE OSTI2025

Dual Optical Hyperbolicity of PdCoO 2 and PdCrO 2 Delafossite Single Crystals

Hyperbolic materials exhibit a very peculiar optical anisotropy with simultaneously different signs of the dielectric tensor components. This anisotropy allows the propagation of exotic surface-wave excitations like hyperbolic phonons and plasmon polaritons. While hyperbolic materials hold promise for applications in subwavelength photonics and enhanced light-matter interactions, their natural occurrence is limited to a few materials, often accompanied by significant dielectric losses and limited hyperbolic spectral bandwidth. Focusing on PdCoO 2 and PdCrO 2 delafossite transition-metal oxides, in this paper unique dual hyperbolic regimes are demonstrated:: one localized around a phonon absorption in the mid-infrared spectral region, and the other extending into the visible range. Both hyperbolic regimes show exceptional properties including low dissipation and high hyperbolic quality factors. These results pave the way for innovative applications of delafossite layered metals in subwavelength photonics, imaging, and sensing.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Resolving Diverse Oxygen Transport Pathways Across Sr‐Doped Lanthanum Ferrite and Metal‐Perovskite Heterostructures

Abstract Perovskite structured transition metal oxides are important technological materials for catalysis and solid oxide fuel cell applications. Their functionality often depends on oxygen diffusivity and mobility through complex oxide heterostructures, which can be significantly impacted by structural and chemical modifications, such as doping. Further, when utilized within electrochemical cells, interfacial reactions with other components (e.g., Ni‐ and Cr‐based alloy electrodes and interconnects) can influence the perovskite's reactivity and ion transport, leading to complex dependencies that are difficult to control in real‐world environments. Here, this work uses isotopic tracers and atom probe tomography to directly visualize oxygen diffusion and transport pathways across perovskite and metal‐perovskite heterostructures, that is, (Ni‐Cr coated) Sr‐doped lanthanum ferrite (La 0.5 Sr 0.5 FeO 3 ; LSFO). Annealing in 18 O 2(g) results in elemental and isotopic redistributions through oxygen exchange (OE) in the LSFO while Ni‐Cr undergoes oxidation via multiple mechanisms and transport pathways. Complementary density functional theory calculations at experimental conditions provide rationale for OE reaction mechanisms and reveal a complex interplay of different thermodynamic and kinetic drivers. These results shed light on the fundamental coupling of defects and oxygen transport in an important class of catalytic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Hierarchical Polyelemental Nanoparticles as Bifunctional Catalysts for Oxygen Evolution and Reduction Reactions

Efficient electrocatalysts are critical in various clean energy conversion and storage systems. Polyelemental nanomaterials are attractive as multi-functional catalysts due to their wide compositions and synergistic properties. However, controlled synthesis of polyelemental nanomaterials is difficult due to their complex composition. Herein, we present a one-step synthetic strategy to fabricate a hierarchical polyelemental nanomaterial, which contains ultrasmall precious metal nanoparticles (IrPt, ~5 nm) anchored on spinel-structure transition metal oxide nanoparticles. The polyelemental nanoparticles serve as excellent bifunctional catalysts for the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). The mass catalytic activity of the polyelemental nanoparticles is 7-times higher than that of Pt in ORR and 28-times that of Ir in OER at the same overpotentials, demonstrating the high activity of the bifunctional electrocatalyst. We attribute this outstanding performance to the controlled multiple elemental composition, mixed chemical states, and large electroactive surface area. The hierarchical nanostructure and polyelemental design of these nanoparticles offers a general and powerful alternative material for catalysis, solar cells, and more.

25 ENERGY STORAGE↗
DOE OSTI2020

Anion Reactivity in Cation‐Disordered Rocksalt Cathode Materials: The Influence of Fluorine Substitution

Abstract The demand for high energy‐density, mass‐producible cathode materials has spurred the exploration of new material structures and compositions. Lithium‐excess, cation‐disordered rocksalt (DRX) materials are a new class of transition metal oxides that display high capacity and environmental friendly composition. These materials achieve their high capacities partially through oxygen redox, which leads to oxygen loss and detrimental reactivity with the electrolyte. It has previously been shown that oxygen loss can be suppressed by partial substitution of the lattice oxygen for fluorine, but the explicit mechanism behind this effect remains unknown. In this work, differential electrochemical mass spectrometry (DEMS) and titration mass spectrometry are used to quantify the primary electrochemical reactions occurring during the first cycle in DRX materials. Comparing a DRX oxide and a DRX oxyfluoride, it is shown that fluorination limits oxygen redox and suppresses oxygen loss. Additionally, DEMS is coupled with fluoride‐scavenging to demonstrate that small amounts of fluorine dissolve from DRX oxyfluorides during the first cycle. Finally, these techniques are extended over the first several cycles, demonstrating that CO 2 evolution persists and fluoride dissolution continues to a diminishing extent during the first few cycles. These findings motivate surface modifications to control interfacial reactivity and improve long‐term cycling.

Crafton, Matthew J.↗
DOE OSTI2023

Rapid and Energy‐Efficient Synthesis of Disordered Rocksalt Cathodes

Abstract Lithium‐rich transition metal oxides with a cation‐disordered rocksalt structure (disordered rocksalt oxides or DRX) are promising candidates for sustainable, next‐generation Li‐ion cathodes due to their high energy densities and compositional flexibility, enabling Co‐ and Ni‐free battery chemistries. However, current methods to synthesize DRX compounds require either high temperature (≈1000 °C) sintering for several hours, or high energy ball milling for several days in an inert atmosphere. Both methods are time‐ and energy‐intensive, limiting the scale up of DRX production. The present study reports the rapid synthesis of various DRX compositions in ambient air via a microwave‐assisted solid‐state technique resulting in reaction times as short as 5 min, which are more than two orders of magnitude faster than current synthesis methods. The DRX compounds synthesized via microwave are phase‐pure and have a similar short‐ and long‐range structure as compared to DRX materials synthesized via a standard solid‐state route, resulting in nearly identical electrochemical performance. In some cases, microwave heating allows for better particle size and morphology control. Overall, the rapid and energy‐efficient microwave technique provides a more sustainable route to produce DRX materials, further incentivizes the development of next‐generation DRX cathodes, and is key to accelerating their optimization via high‐throughput studies.

25 ENERGY STORAGE↗