Search NASA⌕ Search

SEARCH · Search NASA

Results for “Upper bounds”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Theory of a cylindrical probe in a collisionless magnetoplasma

A theory is presented for a cylindrical electrostatic probe in a collisionless plasma in the case where the probe axis is inclined at an angle to a uniform magnetic field. The theory is applicable to electron collection, and under more restrictive conditions, to ion collection. For a probe at space potential, the theory is exact in the limit where probe radius is much less than Debye length. At attracting probe potentials, the theory yields an upper bound and an adiabatic limit for current collection. At repelling probe potentials, it provides a lower bound. The theory is valid if the ratios of probe radius to Debye length and probe radius to mean gyroradius are not simultaneously large enough to produce extrema in the probe sheath potential. The numerical current calculations are based on the approximation that particle orbits are helices near the probe, together with the use of kinetic theory to relate velocity distributions near the probe to those far from it. Probe characteristics are presented for inclination angles from 0 to 90 deg and for probe-radius mean-gyroradius ratios from 0.1 to infinity. For an angle of 0 deg, the end-effect current is calculated separately.

Laframboise, J. G.↗
NASA NTRS1977

Load distributions on slender delta wings having vortex flow

Results obtained through application of potential-flow theory based on a suction flow analogy for incompressible flow are compared to attached-flow theory and to experimental data acquired for sharp-edged delta wings. The error incurred in predicting structural loads on the basis of attached-flow theory is investigated. Force and moment coefficients and load distributions are used in the comparisons. The root bending moment can be estimated by assuming vortex lift concentrated at the wing leading edge. While this may entail some error at large angles of attack (owing to inboard movement of the center of vortex lift), it may furnish an upper bound in evaluating results based on other theories.

Kuhlman, J.↗
NASA NTRS1977

The local interstellar helium density

During the Apollo-Soyuz Test Project, an extreme-ultraviolet telescope observed the region of the sky from which the interstellar medium approaches the sun. The instrument had a tin filter whose bandpass included the 584-A line of neutral helium. The observations set an upper bound for the number density of neutral helium in the local interstellar medium of 0.004 + or - 0.0022 per cu cm, which is significantly lower than previously reported. The stated error is dominated by the present uncertainty in the solar 584-A flux, which is taken to be approximately 200 million photons/sq cm per sec at earth's orbit. The result is not consistent with previous resonant-scattering Ly-alpha observations of interstellar hydrogen passing through the solar system, which generally yield a hydrogen number density of about 0.1 per cu cm, unless interstellar helium is locally depleted below its cosmic abundance. The result is consistent with cosmic abundances if the much lower average hydrogen densities inferred from recent column-density measurements to nearby hot stars are in fact representative of the immediate solar neighborhood.

Freeman, J.↗
NASA NTRS1977

On the error probability of general trellis codes with applications to sequential decoding

An upper bound on the average probability of error for maximum-likelihood decoding of the ensemble of random L-branch binary trellis codes of rate R = 1/n with distinction between memory length and tail length is given. It is shown that the bound is independent of the length L of the information sequence if the memory length exceeds the tail length by a specified amount that depends on L. Sequential decoding simulations using the stack algorithm were conducted to test the dependence of the undetected error probability on tail length and memory length, and the results corroborated the theory.

Johannesson, R.↗
NASA NTRS1976

Performance of convolutionally encoded noncoherent MFSK modem in fading channels

The performance of a convolutionally encoded noncoherent multiple-frequency shift-keyed (MFSK) modem utilizing Viterbi maximum-likelihood decoding and operating on a fading channel is described. Both the lognormal and classical Rician fading channels are considered for both slow and time-varying channel conditions. Primary interest is in the resulting bit error rate as a function of the ratio between the energy per transmitted information bit and noise spectral density, parameterized by both the fading channel and code parameters. Fairly general upper bounds on bit error probability are provided and compared with simulation results in the two extremes of zero and infinite channel memory. The efficacy of simple block interleaving in combatting channel memory effects are thoroughly explored. Both quantized and unquantized receiver outputs are considered.

Modestino, J. W.↗
NASA NTRS1977

Prediction of large negative shaded-side spacecraft potentials

A calculation by Knott, for the floating potential of a spherically symmetric synchronous-altitude satellite in eclipse, was adapted to provide simple calculations of upper bounds on negative potentials which may be achieved by electrically isolated shaded surfaces on spacecraft in sunlight. Large (approximately 60 percent) increases in predicted negative shaded-side potentials are obtained. To investigate effective potential barrier or angular momentum selection effects due to the presence of less negative sunlit-side or adjacent surface potentials, these expressions were replaced by the ion random current, which is a lower bound for convex surfaces when such effects become very severe. Further large increases in predicted negative potentials were obtained, amounting to a doubling in some cases.

Prokopenko, S. M. L.↗
NASA NTRS1977

Mercury's helium exosphere after Mariner 10's third encounter

From Mariner 10 third encounter UV data, a value of .00045 was calculated as the fraction of the solar wind He++ flux intercepted and captured by Mercury's magnetosphere if the observed He atmosphere is maintained by the solar wind. If an internal source for He prevails, the corresponding upper bound for the global outgassing rate is estimated to be 4.5 x 10 to the 22nd power per sec. A surface temperature distribution was used which satisfies the heat equation over Mercury's entire surface using Mariner 10 determined mean surface thermal characteristics. The means stand off distance of Mercury's magnetopause averaged over Mercury's orbit was also used.

Curtis, S. A.↗
NASA NTRS1978

On the ground state of metallic hydrogen

A proposed liquid ground state of metallic hydrogen at zero temperature is explored and a variational upper bound to the ground state energy is calculated. The possibility that the metallic hydrogen is a liquid around the metastable point (rs = 1.64) cannot be ruled out. This conclusion crucially hinges on the contribution to the energy arising from the third order in the electron-proton interaction which is shown here to be more significant in the liquid phase than in crystals.

Chakravarty, S.↗
NASA NTRS1976

An efficient procedure for computing partial ionization of a gas in numerical fluid dynamics

A numerical procedure is described that allows efficient solution for the three nonlinear and implicit equations of state relating the equilibrium properties of a partially (and singly) ionized neutral gas. In the computation, the values for the intensive variables, that is pressure, temperature and ionization coefficient, are iteratively obtained with a given accuracy starting from assigned values for energy and volume per unit mass. Iterative computation is performed only when the value for the ionization coefficient lies within the lower and the upper bounds fixed by the required number of significant digits; otherwise the two explicit equations of state for nonionized or for fully ionized gases are employed.

Garribba, S.↗
NASA NTRS1977

Performance of DPSK with convolutional encoding on time-varying fading channels

The bit error probability performance of a differentially-coherent phase-shift keyed (DPSK) modem with convolutional encoding and Viterbi decoding on time-varying fading channels is examined. Both the Rician and the lognormal channels are considered. Bit error probability upper bounds on fully-interleaved (zero-memory) fading channels are derived and substantiated by computer simulation. It is shown that the resulting coded system performance is a relatively insensitive function of the choice of channel model provided that the channel parameters are related according to the correspondence developed as part of this paper. Finally, a comparison of DPSK with a number of other modulation strategies is provided.

Mui, S. Y.↗
NASA NTRS1977

Diagrammatic perturbation theory - The ground state of the carbon monosulfide molecule

Diagrammatic many-body perturbation theory is employed in a study of the ground state of the carbon monosulfide molecule for bond lengths close to the equilibrium value. The calculations are complete through third order in the energy within the algebraic approximation. Two different zero-order Hamiltonians are considered, and all two-, three-, and four-body terms are determined for the corresponding perturbation expansions. Many-body effects are found to be very important. Pade approximants to the energy expansion are constructed, and upper bounds evaluated. Almost 53 percent of the estimated correlation energy is recovered. The variation of components of the correlation energy with nuclear separation is investigated. Spectroscopic constants are also calculated.

Wilson, S.↗
NASA NTRS1978

Mercury's helium exosphere after Mariner 10's third encounter

From a comparison of the Mariner 10 third encounter UV spectrometer data with intensities generated from a newly constructed model exosphere, a new value of 4.5 x 10 to the -4th power for the fraction of the solar wind He(++) flux to be intercepted and captured by Mercury's magnetosphere, if the observed He atmosphere is maintained by the solar wind, has been derived. If an internal source for He prevails, the corresponding upper bound for the global outgassing rate is estimated to be 4.5 x 10 to the 22nd power/s. These values differ from those given earlier because of the present use of a surface temperature distribution satisfying the heat equation over Mercury's entire surface which employs Mariner-10-determined mean surface thermal characteristics. The mean standoff distance of Mercury's magnetopause averaged over Mercury's orbit is also used. Agreement between the observed and calculated intensities is found to be good. Minor discrepancies on the nightside of the terminator are explicable in terms of differences between actual and computed temperatures and scale height structure changes.

Curtis, S. A.↗
NASA NTRS1977

Determination and error analysis of emittance and spectral emittance measurements by remote sensing

Theoretical and experimental determinations of the emittance of soils and leaves are reviewed, and an error analysis of emittance and spectral emittance measurements is developed as an aid to remote sensing applications. In particular, an equation for the upper bound of the absolute error in an emittance determination is derived. The absolute error is found to decrease with an increase in contact temperature and to increase with an increase in environmental integrated radiant flux density. The difference between temperature and band radiance temperature is plotted as a function of emittance for the wavelength intervals 4.5 to 5.5 microns, 8 to 13.5 microns and 10.2 to 12.5 microns.

Kumar, R.↗
NASA NTRS1978

Computer-aided analysis and design of the shape rolling process for producing turbine engine airfoils

Mild steel (AISI 1018) was selected as model cold rolling material and Ti-6A1-4V and Inconel 718 were selected as typical hot rolling and cold rolling alloys, respectively. The flow stress and workability of these alloys were characterized and friction factor at the roll/workpiece interface was determined at their respective working conditions by conducting ring tests. Computer-aided mathematical models for predicting metal flow and stresses, and for simulating the shape rolling process were developed. These models utilized the upper bound and the slab methods of analysis, and were capable of predicting the lateral spread, roll separating force, roll torque, and local stresses, strains and strain rates. This computer-aided design system was also capable of simulating the actual rolling process, and thereby designing the roll pass schedule in rolling of an airfoil or a similar shape.

Lahoti, G. D.↗
NASA NTRS1977

Determination and error analysis of emittance and spectral emittance measurements by remote sensing

The author has identified the following significant results. From the theory of remote sensing of surface temperatures, an equation of the upper bound of absolute error of emittance was determined. It showed that the absolute error decreased with an increase in contact temperature, whereas, it increased with an increase in environmental integrated radiant flux density. Change in emittance had little effect on the absolute error. A plot of the difference between temperature and band radiance temperature vs. emittance was provided for the wavelength intervals: 4.5 to 5.5 microns, 8 to 13.5 microns, and 10.2 to 12.5 microns.

Dejesusparada, N.↗
NASA NTRS1979

Application of the relative energy release criteria to enclosure fire testing

The five relative energy release criteria (RERC) which are a first step towards formulating a unified concept that can be applied to the development of fires in enclosures, place upper bounds on the rate and amount of energy released during a fire. They are independent, calculated readily, and may be applied generally to any enclosure regardless of size. They are useful in pretest planning and for interpreting experimental data. Data from several specific fire test programs were examined to evaluate the potential use of RERC to provide test planning guidelines. The RERC were compared with experimental data obtained in full-scale enclosures. These results confirm that in general the RERC do identify the proper limiting constraints on enclosure fire development and determine the bounds of the fire development envelope. Plotting actual fire data against the RERC reveals new valid insights into fire behavior and reveals the controlling constraints in fire development. The RERC were calculated and plotted for several descrpitions of full-scale fires in various aircraft compartments.

Roschke, E. J.↗
NASA NTRS1978

Observation of the nearly diurnal resonance of the earth using a laser strainmeter

The response of the Earth to the diurnal and semidiurnal tidal excitations was studied. Results show that there is significant structure in the response of the earth to tidal excitations near one cycle/sidereal day. This structure agrees with the resonance behavior predicted from the calculations of the forced elasticgravitational response of an elliptical, rotating earth with a liquid outer core. The data is used to test for possible preferred frames and spatial anisotropies. Upper bounds on the parameterized post-Newtonian (PPN) parameters were examined.

Levine, J.↗
NASA NTRS1978

Computer-aided analysis and design of the shape rolling process for producing turbine engine airfoils

Mild steel (AISI 1018) was selected as model cold-rolling material and Ti-6Al-4V and INCONEL 718 were selected as typical hot-rolling and cold-rolling alloys, respectively. The flow stress and workability of these alloys were characterized and friction factor at the roll/workpiece interface was determined at their respective working conditions by conducting ring tests. Computer-aided mathematical models for predicting metal flow and stresses, and for simulating the shape-rolling process were developed. These models utilize the upper-bound and the slab methods of analysis, and are capable of predicting the lateral spread, roll-separating force, roll torque and local stresses, strains and strain rates. This computer-aided design (CAD) system is also capable of simulating the actual rolling process and thereby designing roll-pass schedule in rolling of an airfoil or similar shape. The predictions from the CAD system were verified with respect to cold rolling of mild steel plates. The system is being applied to cold and hot isothermal rolling of an airfoil shape, and will be verified with respect to laboratory experiments under controlled conditions.

Lahoti, G. D.↗