Search NASA⌕ Search

SEARCH · Search NASA

Results for “VELOCITY MEASUREMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

DISAPPEARANCE OF A NARROW Mg II ABSORPTION SYSTEM WITH A MEASURED VELOCITY UP TO 166, 000 km s{sup –1}

Quasar J152645.61+193006.7 (z{sub e} = 2.5771) was observed by the Sloan Digital Sky Survey (SDSS) on 2006 May 31 and again on 2011 April 9. The time interval of the SDSS two observations is 497.4 days at the quasar rest frame. From the spectra of this quasar, we detect a phenomenon of the disappearance of a narrow Mg II λλ2796, 2803 absorption system with a velocity of up to 166, 129 km s{sup –1} with respect to the quasar. This disappearance event can be caused by changes in the ionization state of absorbing gas or by the bulk motion of the absorbing gas across the quasar sightline. The coverage fraction analysis shows that this absorber partially covers the background emission sources with an effective coverage fraction of C{sub f} = 0.40 ± 0.06. The time variation analysis and the coverage fraction analysis imply that this absorber might be intrinsic to the quasar. However, the scenario of a cosmologically separated foreground object located at z = 0.9170 accounting for the phenomenon cannot be ruled out, according to current available data.

79 ASTRONOMY AND ASTROPHYSICS↗

Principal component analysis of modified gravity using weak lensing and peculiar velocity measurements

We perform a principal component analysis to assess ability of future observations to measure departures from General Relativity in predictions of the Poisson and anisotropy equations on linear scales. In particular, we focus on how the measurements of redshift-space distortions (RSD) observed from spectroscopic galaxy redshift surveys will improve the constraints when combined with lensing tomographic surveys. Assuming a Euclid-like galaxy imaging and redshift survey, we find that adding the 3D information decreases the statistical uncertainty by a factor between 3 and 7 compared to the case when only observables from lensing tomographic surveys are used. We also find that the number of well-constrained modes increases by a factor between 3 and 6. Our study indicates the importance of joint galaxy imaging and redshift surveys such as SuMIRe and Euclid to give more stringent tests of the ΛCDM model and to distinguish between various modified gravity and dark energy models.

79 ASTRONOMY AND ASTROPHYSICS↗

Acoustic Particle Velocity Measurements around a Tidal Current Turbine

Quantifying the underwater sound produced by tidal turbines is essential both to understand their potential environmental impacts and to understand how that sound might interfere with the intended application of the turbine (e.g., powering acoustic monitoring systems). In this project, we measured the sound radiated by a small-scale crossflow tidal turbine. The turbine was deployed from October 2023 to March 2024 in the tidal channel at the entrance to Sequim Bay, WA. Acoustic measurements were made with three different sensor packages: a commercial-off-the-shelf vector sensor (operated by PNNL), a vector sensor array (operated by Integral Consulting), and drifting hydrophones (operated by UW). Acoustic recordings from the three sensors highlight changes in the turbine acoustic signature over the course of a tidal cycle and throughout the 6-month turbine deployment. Our results also highlight the utility of acoustic vector sensors for localizing sound attributable to marine energy devices in acoustically complex environments.

16 TIDAL AND WAVE POWER↗

Conduct overall test operations and evaluate two Doppler systems to detect, track and measure velocities in aircraft wake vortices

A program plan for system evaluation of the two-dimensional Scanning Laser Doppler System (SLDS) is presented. In order to meet system evaluation and optimization objectives the following tests were conducted: (1) noise tests; (2) wind tests; (3) blower flowfield tests; (4) single unit (1-D) flyby tests; and (5) dual unit (2-D) flyby tests. Test results are reported. The final phase of the program included logistics preparation, equipment interface checkouts, and data processing. It is concluded that the SLDS is capable of accurately tracking aircraft wake vortices from small or large aircraft, and in any type of weather.

Wilson, D. J.↗

Particle size and velocity measurement by laser anemometry

The use of a forward scattering Laser Anemometer system for the measurement of particle diameters larger than the fringe spacing is investigated. A systematic calibration experiment demonstrates a direct relationship between signal amplitude and particle diameter for transparent particles between 30 microns and 240 microns in diameter. A light scattering analysis confirms these measurements and indicates how the range of particles which can be measured using the peak (mean) signal depends on the optical arrangement and particle properties. On the basis of this work a real time Laser Anemometer signal processor is modified so that the peak of the mean of each signal can be measured. A method of correcting data for the effect of particles which do not go through the center of the measurement volume is derived. Good agreement is found between particle size distributions measured in sprays by using the Laser Anemometer and size distributions measured by collecting the particles on a slide and using an image analysis computer.

Yule, A. J.↗

Internal friction and velocity measurements

The Q of a lunar basalt sample was measured under varying vacuum conditions, and it was found that even at pressures as low as 10 to the -7th to 10 to the -10th torr, substantial increases in Q with decreasing pressure are observed, while the resonant frequency increases only slightly. This suggests that only small amounts of volatiles are sufficient to increase the internal friction (lower the Q) dramatically. The technique of vibrating encapsulated samples in the torsional mode was used to measure Q of terrestrial rocks as a function of hydrostatic pressure under lunar vacuum conditions. Young's modulus measurements in the temperature range 25-600 C under a variety of conditions including high vacuum show no evidence of any irreversibility upon temperature cycling and no indication that the high Q-values obtained are associated with any permanent structure changes such as the formation of lossless 'welded' contacts.

Tittmann, B. R.↗

An anemometer for measuring velocities on the .25 to 4.25 M/sec range

A vane type anemometer was developed as a secondary standard for the on site calibration of wind velocity sensors. The instrument outputs an electrical pulse for each interruption of a light source by an eight vane fan. The pulse rate is proportional to the fan's angular speed and linearly related to wind velocity over the range 0.25 to 4.27 m/sec.

Carpini, T. D.↗

Laser Doppler velocity measurements in subsonic, transonic, and supersonic turbulent boundary layers

Recent measurements have used laser Doppler velocimetry to make direct measurements of the Reynolds stress in turbulent boundary layers in the Mach number range 1.5 to 3.0. A serious anomaly, however, is exhibited in these measurements in that the maximum of -u-prime v-prime occurs much farther from the wall than is reasonable for flow at constant pressure. The purpose of the present experiments was to obtain redundant data over a substantial range of Mach numbers (0.1-2.2) in an effort to resolve the anomaly in turbulent shearing stress.

Dimotakis, P. E.↗

Unsteady density and velocity measurements in the 6 foot x 6 foot wind tunnel

The methods used and the results obtained in four aero-optic tests are summarized. It is concluded that the rather large values of density fluctuation appear to be the result of much higher Mach number than freestream and the violent turbulence in the flow as it separates from the turret. A representative comparison of fairing on-fairing off rms density fluctuation indicates essentially no effect at M = 0.62 and a small effect at M = 0.95. These data indicate that some slight improvement in optical quality can be expected with the addition of a fairing, although at M = 0.62 its effect would be nil. Fairings are very useful in controlling pressure loads on turrets, but will not have first order effects on optical quality. Scale sizes increase dramatically with increasing azimuth angle for a reprensentative condition. Since both scale sizes and fluctuation levels increase (total turbulence path length also increases) with azimuth angle, substantial optical degradation might be expected. For shorter wave lengths, large degradations occur.

Rose, W. C.↗

First Scientific Working Group Meeting of Airborne Doppler Lidar Wind Velocity Measurement Program

The purpose of the first scientific working group meeting was fourfold: (1) to identify flight test options for engineering verification of the MSFC Doppler Lidar; (2) to identify flight test options for gathering data for scientific/technology applications; (3) to identify additional support equipment needed on the CV 990 aircraft for the flight tests; and (4) to identify postflight data processing and data sets requirements. The working group identified approximately ten flight options for gathering data on atmospheric dynamics processes, including turbulence, valley breezes, and thunderstorm cloud anvil and cold air outflow dynamics. These test options will be used as a basis for planning the fiscal year 1981 tests of the Doppler Lidar system.

Kaufman, J. W.↗

First Scientific Working Group Meeting of Airborne Doppler Lidar Wind Velocity Measurement Program, appendix C

The problem is to operate on two scalar fields to produce a vector field, to produce user products from the vector field, and to establish reliability of results. Data problems encountered include sparse measurements, irregular distribution, varying quality, imperfect orthogonality, aliasing due to sampling volume, and measurements not simultaneous. Desired algorithm characteristics, solution elements, and characteristics of the model are listed. The seven simulation elements, eight algorithm steps and the required user inputs are given.

Lee, R. W.↗