Search NASA⌕ Search

SEARCH · Search NASA

Results for “WEDGE FLOW”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS2013

Experimental Investigation of Shock-Shock Interactions Over a 2-D Wedge at M=6

The effects of fin-leading-edge radius and sweep angle on peak heating rates due to shock-shock interactions were investigated in the NASA Langley Research Center 20-inch Mach 6 Air Tunnel. The fin model leading edges, which represent cylindrical leading edges or struts on hypersonic vehicles, were varied from 0.25 inches to 0.75 inches in radius. A 9deg wedge generated a planar oblique shock at 16.7deg to the flow that intersected the fin bow shock, producing a shock-shock interaction that impinged on the fin leading edge. The fin angle of attack was varied from 0deg (normal to the free-stream) to 15deg and 25deg swept forward. Global temperature data was obtained from the surface of the fused silica fins through phosphor thermography. Metal oil flow models with the same geometries as the fused silica models were used to visualize the streamline patterns for each angle of attack. High-speed zoom-schlieren videos were recorded to show the features and temporal unsteadiness of the shock-shock interactions. The temperature data were analyzed using one-dimensional semi-infinite as well as one- and two-dimensional finite-volume methods to determine the proper heat transfer analysis approach to minimize errors from lateral heat conduction due to the presence of strong surface temperature gradients induced by the shock interactions. The general trends in the leading-edge heat transfer behavior were similar for the three shock-shock interactions, respectively, between the test articles with varying leading-edge radius. The dimensional peak heat transfer coefficient augmentation increased with decreasing leading-edge radius. The dimensional peak heat transfer output from the two-dimensional code was about 20% higher than the value from a standard, semi-infinite one-dimensional method.

Jones, Michelle L.↗
NASA NTRS2013

Thermographic Phosphor Measurements of Shock-Shock Interactions on a Swept Cylinder

The effects of fin leading-edge radius and sweep angle on peak heating rates due to shock-shock interactions were investigated in the NASA Langley Research Center 20-inch Mach 6 Air Tunnel. The fin model leading edges, which represent cylindrical leading edges or struts on hypersonic vehicles, were varied from 0.25 inches to 0.75 inches in radius. A 9deg wedge generated a planar oblique shock at 16.7deg to the flow that intersected the fin bow shock, producing a shock-shock interaction that impinged on the fin leading edge. The fin angle of attack was varied from 0deg (normal to the free-stream) to 15deg and 25deg swept forward. Global temperature data was obtained from the surface of the fused silica fins using phosphor thermography. Metal oil flow models with the same geometries as the fused silica models were used to visualize the streamline patterns for each angle of attack. High-speed zoom-schlieren videos were recorded to show the features and temporal unsteadiness of the shock-shock interactions. The temperature data were analyzed using one-dimensional semi-infinite as well as one- and two-dimensional finite-volume methods to determine the proper heat transfer analysis approach to minimize errors from lateral heat conduction due to the presence of strong surface temperature gradients induced by the shock interactions. The general trends in the leading-edge heat transfer behavior were similar for the three shock-shock interactions, respectively, between the test articles with varying leading-edge radius. The dimensional peak heat transfer coefficient augmentation increased with decreasing leading-edge radius. The dimensional peak heat transfer output from the two-dimensional code was about 20% higher than the value from a standard, semi-infinite onedimensional method.

Jones, Michelle L.↗
NASA NTRS2015

Global Aeroheating Measurements of Shock-Shock Interactions on a Swept Cylinder

The effects of fin leading-edge radius and sweep angle on peak heating rates due to shock-shock interactions were investigated in the NASA Langley Research Center 20-Inch Mach 6 Air Tunnel. The cylindrical leading-edge fin models, with radii varied from 0.25 to 0.75 inches, represent wings or struts on hypersonic vehicles. A 9deg wedge generated a planar oblique shock at 16.7deg. to the flow that intersected the fin bow shock, producing a shock-shock interaction that impinged on the fin leading edge. The fin sweep angle was varied from 0deg (normal to the free-stream) to 15deg and 25deg swept forward. These cases were chosen to explore three characterized shock-shock interaction types. Global temperature data were obtained from the surface of the fused silica fins using phosphor thermography. Metal oil flow models with the same geometries as the fused silica models were used to visualize the streamline patterns for each angle of attack. High-speed zoom-schlieren videos were recorded to show the features and any temporal unsteadiness of the shock-shock interactions. The temperature data were analyzed using a one-dimensional semi-infinite method, as well as one- and two-dimensional finite-volume methods. These results were compared to determine the proper heat transfer analysis approach to minimize errors from lateral heat conduction due to the presence of strong surface temperature gradients induced by the shock interactions. The general trends in the leading-edge heat transfer behavior were similar for each explored shock-shock interaction type regardless of the leading-edge radius. However, the dimensional peak heat transfer coefficient augmentation increased with decreasing leading-edge radius. The dimensional peak heat transfer output from the two-dimensional code was about 20% higher than the value from a standard, semi-infinite one-dimensional method.

Mason, Michelle L.↗
NASA NTRS1976

Numerical simulation of supersonic and hypersonic turbulent compression corner flows using relaxation models

Relaxation turbulence eddy viscosity models are incorporated to solve the complete Navier-Stokes equations for supersonic and hypersonic flows over a two-dimensional compression corner. The system of equations is solved by a time-split, second-order accurate numerical scheme. Details of relaxation process are studied, and several relaxation models are tested and compared. Good improvement in the prediction of upstream pressure propagation is obtained for a Mach number of 2.96, and Reynolds number of 10,000,000, with wedge angle of 25 deg. However, the application of the relaxation models to hypersonic flow at Mach number 8.66 and Reynolds number of 22,000,000, with highly cooled wall, shows unfavorable effects on heat transfer and skin friction in the reattachment and recompression regions.

Hung, C. M.↗
NASA NTRS1998

Global MHD Simulations of the Substorm Current Wedge and Dipolarization

This paper presents results from global MHD simulations showing the evolution of the plasma and field in the near-Earth tail during the substorm phases. The late growth phase is characterized by pronounced thinning of the plasma sheet and stretching of the field in the region between approximately -6 R(sub E) to -30 R(sub E). A pre-existing X-line moves tailward to beyond -50 R(sub E). Close to onset, a new X-line forms near -18 R(sub E) in the midnight sector. Earthward flows emanating from this X-line dipolarize the near-Earth field, leading to a reduction of the cross-tail current in the midnight sector, but not elsewhere. The magnetic shear between the dipolarized field near midnight and the stretched field elsewhere is equivalent to currents flowing through the ionosphere in a region I sense, and so forming the current wedge. Later in the expansion phase, the dipolarization spreads in local time at a rate of about 0.3 hours MLT per minute. A strong electric field and a rapid increase of the plasma pressure is associated with the dipolarization. Near midnight the dipolarization appears to occur at all distances between 6.6 and 13 R(sub E) at the same time within the resolution (+/- 2 min) of our model. However, the model results indicate that dipolarization starts before ground onset in the pre-midnight sector and propagates both earthward and eastward.THus, dipolarization may be much more complex than simple earthward/tailward and/or azimuthal expansion.

Raeder, J.↗
NASA NTRS1972

Measured and calculated mean flow properties of a two-dimensional, hypersonic, turbulent wake

The hypersonic turbulent wake produced by a wedge was studied experimentally and its properties were compared with predictions obtained from a numerical computation procedure. In the computation procedure several models for the eddy viscosity formulation of the turbulent transport were examined. Conventional-defect models and a modified mixing-length model were found to yield good predictions of the experimental data. The classical mixing-length model gave unrealistic results. The experimental data displayed similarity when velocity and temperature defects were scaled by the maximum defects and the transverse coordinate was scaled by the velocity-defect half-width.

Wagner, R. D.↗
NASA NTRS1987

Application of the CSCM method to the design of wedge cavities

This paper describes the application of the conservative supra characteristic method (CSCM) to predict the flow around two-dimensional slot injection cooled cavities in hypersonic flow. Seven different numerical solutions are presented that model three different experimental designs. The calculations manifest outer flow conditions including the effects of nozzle/lip geometry, angle of attack, nozzle inlet conditions, boundary and shear layer growth and turbulance on the surrounding flow. The calculations were performed for analysis prior to wind tunnel testing for sensitivity studies early in the design process. Qualitative and quantitative understanding of the flows for each of the cavity designs and design recommendations are provided. The present paper demonstrates the ability of numerical schemes, such as the CSCM method, to play a significant role in the design process.

Venkatapathy, Ethiraj↗
NASA NTRS1984

Flat plate heat transfer for laminar transition and turbulent boundary layers using a shock tube

Heat transfer results are presented for laminar, transition, and turbulent boundary layers for a Mach number of 0.12 with gas temperatures of 425 K and 1000 K over a flat plate at room temperature. The measurements were made in air for a Reynolds number range of 600 to 6 million. The heat transfer measurements were conducted in a 70-ft long, 4 in. diameter shock tube. Reflecting wedges were used to reflect the incident shock wave to produce a flow Mach number of 0.12 behind the reflected shock wave. Thin film platinum heat gages were mounted on the plate surface to measure the local heat flux. The laminar results for gas temperatures of 425 K to 1000 K agree well with theory. The turbulent results are also close to incompressible theory, with the 1000 K flow case being slightly higher. The transition results lie between the laminar and turbulent predictions.

Brostmeyer, J. D.↗
NASA NTRS1985

Information content in spectral calculations

Analytical procedures for extracting piecewise smooth solutions of hyperbolic systems from raw oscillatory data obtained by pseudospectral methods are developed. The validity of the approach is demonstrated for the case of linear problems with constant coefficients, and plausibility arguments are presented which indicate its applicability to nonlinear operators when the steady state has been achieved. Numerical results for the development of an oblique shock when a wedge is inserted at zero angle of attack into a uniform supersonic flow of an ideal gas (the time-dependent two-dimensional Euler equations discretized in space by the pseudospectral Chebyshev method) are presented in tables and graphs.

Abarbanel, S.↗
NASA NTRS1990

Supersonic flameholding by attached oblique shock waves

The object of this investigation was to explore various regimes of shock-induced combustion that may occur as a result of supersonic flow of a reactive gas mixture past a simple compression ramp or wedge. Attention was confined to combinations of wedge angles, fuel-air mixture ratios and freestream velocities that permit the resulting oblique shock or oblique detonation wave to remain attached. Computational fluid dynamic (CFD) simulations, both inviscid and viscous, were performed and analyzed in order to investigate two modes of compression ramp flameholding; namely, complete oblique detonation wave (ODW) and shock-induced combustion. In addition, the possibility of flame persistence or hysteresis was explored. It was preliminarily concluded that inclusion of viscous effects may be essential to accurately predict the occurrence of the various flameholding modes.

Fort, James A.↗
NASA NTRS1996

Seeding for laser velocimetry in confined supersonic flows with shocks

There is a lack of firm conclusions or recommendations in the open literature to guide laser velocimeter (LV) users in minimizing the uncertainty of LV data acquired in confined supersonic flows with steep velocity gradients. This fact led the NASA Lewis Research Center (LeRC) in Cleveland (Ohio, USA), and the Institute of Propulsion Technology of DLR in Cologne (Germany) to a joint research effort to improve reliability of LV measurements in supersonic flows. Over the years, NASA and DLR have developed different expertise in laser velocimetry, using different LV systems: Doppler and two-spot (L2F). The goal of the joint program is to improve the reliability of LV measurements by comparing results from experiments in confined supersonic flows performed under identical test conditions but using two different LV systems and several seed particle generators. Initial experiments conducted at the NASA LERC are reported in this paper. The experiments were performed in a narrow channel with Mach number 2.5 flow containing an oblique shock wave generated by an immersed 25-dg wedge.

Lepicovsky, J.↗
NASA NTRS1975

The slow recirculating flow near the rear stagnation point of a wake

A model is suggested in which some of the important features of the circulating flow inside the two-dimensional near wake are derived by assuming a slow viscous flow. The theory considers the flow away from the body base. It is found that there is a region of constant speed merging, as we go downstream, into a region of stagnation-apex flow. The velocity returning from the rear stagnation point along the center streamline is shown to be a slowly varying function of the 'wedge-angle,' of the wake and to be roughly one half the velocity at the edge of the shear layers driving the wake-cavity flow. These results seem to be in agreement with experimental data.

Abarbanel, S.↗
NASA NTRS2007

Models of Active Glacial Isostasy Roofing Warm Subduction: Case of the South Patagonian Ice Field

Modern geodetic techniques such as precise Global Positioning System (GPS) and high-resolution space gravity mapping (Gravity Recovery and Climate Experiment, GRACE) make it possible to measure the present-day rate of viscoelastic gravitational Earth response to present and past glacier mass changes. The Andes of Patagonia contain glacial environments of dramatic mass change. These mass load changes occur near a tectonically active boundary between the Antarctic and South American plates. The mechanical strength of the continental side of this boundary is influenced by Neogene ridge subduction and by the subduction of a youthful oceanic slab. A ridge of young volcanos parallels the Pacific coastline. Release of volatiles (such as water) at depth along this ridge creates a unique rheological environment. To assess the influence of this rheological ridge structure on the observational land uplift rate, we apply a two dimensional viscoelastic Earth model. A numerical study is presented which examines the sensitivity of the glacial loading-unloading response to the complex structure at depth related to the subducting slab, the viscous wedge between slab and continental lithosphere, and the increase of elastic thickness from oceanic to continental lithosphere. A key feature revealed by our numerical experiments is a continuum flow wherein the slab subdues the material transport toward oceanic mantle and crust. The restricted flow is sensitive to the details of slab mechanical strength and penetration into the upper mantle. The reduced viscosity within the mantle wedge, however, enhances the load-induced material transport everywhere within the asthenosphere.

crustal mass changes↗
NASA NTRS2012

Surface Textures and Features Indicative of Endogenous Growth at the McCartys Flow Field, NM, as an Analog to Martian Volcanic Plains

Basaltic lavas typically form channels or tubes, which are recognized on the Earth and Mars. Although largely unrecognized in the planetary community, terrestrial inflated sheet flows also display morphologies that share many commonalities with lava plains on Mars. The McCartys lava flow field is among the youngest (approx.3000 yrs) basaltic flows in the continental United States. The southwest sections of the flow displays smooth, flat-topped plateaus with irregularly shaped pits and hummocky inter-plateau units that form a polygonal surface. Plateaus are typically elongate in map view, up to 20 m high and display lineations within the glassy crust. Lineated surfaces occasionally display small < 1m diameter lava coils. Lineations are generally straight and parallel each other, sometimes for over 100 meters. The boundaries between plateaus and depressions are also lineated and tilted to angles sometimes approaching vertical. Plateau-parallel cracks, sometimes containing squeeze-ups, mark the boundary between tilted crust and plateau. Some plateau depressions display level floors with hummocky surfaces, while some are bowl shaped with floors covered in broken lava slabs. The lower walls of pits sometimes display lateral, sagged lava wedges. Infrequently, pit floors display the upper portion of a tumulus from an older flow. In some places the surface crust has been disrupted forming a slabby texture. Slabs are typically on the scale of a meter or less across and no less than 7-10 cm thick. The slabs preserve the lineated textures of the undisturbed plateau crust. It appears that this style of terrain represents the emplacement of an extensive sheet that experiences inflation episodes within preferred regions where lateral spreading of the sheet is inhibited, thereby forming plateaus. Rough surfaces represent inflation-related disruption of pahoehoe lava and not a a lava. Depressions are often the result of non-inflation and can be clearly identified by lateral squeeze-outs along the pit walls that form when the rising crust exposes the still liquid core of the sheet. The plains of Tharsis and Elysium, Mars, display many analogous features

Bleacher, Jacob E.↗
NASA NTRS1959

Effects of Cross-Sectional Shape, Solidity, and Distribution of Heat-Transfer Coefficient on the Torsional Stiffness of Thin Wings Subjected to Aerodynamic Heating

A study has been made of the effects of varying the shape, solidity, and heat-transfer coefficient of thin wings with regard to their influence on the torsional-stiffness reduction induced by aerodynamic heating. The variations in airfoil shape include blunting, flattening, and combined blunting and flattening of a solid wing of symmetrical double-wedge cross section. Hollow double-wedge wings of constant skin thickness with and without internal webs also are considered. The effects of heat-transfer coefficients appropriate for laminar and turbulent flow are investigated in addition to a step transition along the chord from a lower to a higher constant value of heat-transfer coefficient. From the results given it is concluded that the flattening of a solid double wedge decreases the reduction in torsional stiffness while slight degrees of blunting increase the loss. The influence of chordwise variations in heat-transfer coefficient due to turbulent and laminar boundary-layer flow on the torsional stiffness of solid wings is negligible. The effect of a step transition in heat-transfer coefficient along the chord of a solid wing can, however, become appreciable. The torsional-stiffness reduction of multiweb and hollow double-wedge wings is substantially less than that calculated for a solid wing subjected to the same heating conditions.

Thomson, Robert G.↗
NASA NTRS1979

Some recent developments in the prediction of shock interaction phenomena at hypersonic speeds

The shock strengths for which either Edney type I or type II shock interference patterns can occur when two oblique shocks of opposite families intersect were determined graphically at Mach 10 by using logarithmic shock polar diagrams. The theoretical region of overlap for the two types of interaction was investigated by observing in the Schlieren system of the Langley 15-inch hypersonic flow apparatus the intersection of oblique shocks generated by two sharp 10 degree wedges as the wedge angles of attack and their relative positions were altered. A range of shock strengths for which either of the two interference patterns can exist was demonstrated.

Crawford, D. H.↗
NASA NTRS1982

Radiative properties of a nickel based superalloy: Inconel 617 - After simulated earth reentry

Experimental results are presented to show the effect of environmental simulation exposures of convective heating and of radiant heating on the spectral (1.0 to 14 micrometers) and total emittance of oxidized Inconel 617. Convective heating exposures were conducted in an arc heated supersonic wind tunnel using a wedge-shaped specimen configuration. Radiant tests were conducted in dry air at a flow velocity of several meters per second. Convective heating specimens were subjected to 8, 20 and 38 heating cycles of 15-minutes duration and radiant heating specimens were tested for 10, 20, 50 and 100 one-half hour heating cycles. Changes in radiative properties are discussed in terms of changes in composition and morphology resulting from the exposure tests. Total normal emittance did not significantly change from the statically oxidized condition after either type of exposure, and it remained above 0.80 at 1260K for all cases. Although spectral changes were observed on post exposure specimens at wavelengths less than 2.0 micrometers and greater than 15 micrometers, these changes have no influence on total emittance at 1260K.

Cunnington, G. R.↗