Search NASA⌕ Search

SEARCH · Search NASA

Results for “WELLS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Low-cost DH and quantum well laser array development

The intial results of a program aimed at developing low-cost diode laser arrays for use as solid-state laser pumps are reported. MOCVD is used to demonstrate excellent run-to-run reproducibility in emission wavelength, threshold current density, and quantum efficiency. For this first experimental series, J(th) values of approximately 1310 Amps/sq cm were obtained for broad-area unthinned devices from the growth runs. Differential quantum efficiencies of between 41 percent and 47 percent were measured on the non-facet-coated devices from all four runs. Single quantum well, separate confinement heterostructure lasers fabricated from wafers grown in the same MOCVD reactor exhibited near single-mode emission, with J(th) values of approximately 300 Amps/sq cm. Photoluminescence data confirm quantum well widths of 80 A and 150 A for two different MOCVD growth runs.

Linden, Kurt J.↗

Highly efficient pseudomorphic InGaAs/GaAs/AlGaAs single quantum well lasers for monolithic integration

Highly efficient ridge waveguide pseudomorphic single quantum well lasers, emitting at 980 nm, have been fabricated from an In(0.2)Ga(0.8)As/GaAs/AlGaAs graded-index separate confinement heterostructure grown by molecular beam epitaxy. The laterial index guiding provided by the ridge reduces the anomalously large lateral loss of optical power found in gain-guided structures, thereby reducing the internal loss by more than 50 percent. The low threshold current (7.6 mA) and high differential quantum efficiency (79 percent) obtained under continuous operation as well as the transparency of the GaAs substrate to the emitted radiation render these lasers attractive for Ga-As-based optoelectronic integration.

Larsson, A.↗

Multiple-Quantum-Well Intersubband Infrared Detector

Proposed multiple-quantum-well intersubband semiconductor device detects photons over broader range of wavelengths. Device is stack of substacks, each of which contains quantum-well layers sensitive to different narrow band of wavelengths. Bandwidth and detectivity increased.

Borenstain, Shmuel I.↗

Fundamental limits to performance of quantum well infrared detectors

Radiometric, density of states (material), and thermal considerations are used to obtain the figure of merit of the quantum-well GaAs/GaAlAs infrared detectors described by Smith et. al. The results are compared with HgCdTe, the present industry standard, as well as with recent experiments at other laboratories.

Yariv, Amnon↗

Near-nadir radar backscatter from a well-developed sea

The Kirchhoff approximation for the case of well-developed seas is analyzed. In this peculiar case, the equilibrium range in the wave number spectrum corresponds to a cascade pattern in the surface geometry. Its high wave number cutoff is shown to be a major factor of the radar backscatter. This intrinsic scale is evaluated, and both the geometrical and the physical optics terms are related to major parameters of wind-wave dynamics. The range of validity of the Kirchhoff approximation and the relative importance of the diffraction correction are analyzed. Finally, the radar cross section sigma exp 0 of well-developed seas is compared with that of poorly developed seas. The great qualitative difference shown in the wind speed dependence of sigma exp 0 for these two regimes is pointed out as a source of a considerable error trend recently discovered in satellite altimeter wind measurements.

Glazman, Roman E.↗

Optically induced absorption modulation in a periodically delta-doped InGaAs/GaAs multiple quantum well structure

Strong optically induced absorption modulation has been achieved in a periodically delta-doped InGaAs/GaAs multiple quantum well structure. The use of delta-doping has enabled efficient modulation in short-period structures using a low-power semiconductor laser. With an excitation intensity of 100 mW/sq cm an absolute quantum well absorption change of more than 9000 cm has been measured corresponding to a differential absorption change as high as 58 percent at the excitonic resonance.

Larsson, A.↗

How well is Martian ozone inferred with reflectance spectroscopy?

The Mariner 9 UV spectrometer scanned from 2100 to 3500 Angstroms in one of its two spectral channels every 3 seconds with a spectral resolution of 15 Angstroms and an effective field-of-view of approximately 300 km(exp 2). The only gaseous absorption in the 2000 to 3000 Angstrom region was assumed to come from the Hartley band system of ozone, and therefore the amount of ozone was inferred by fitting this absorption feature with laboratory data of ozone absorption. Mars O3 as inferred from these spectra shows strong seasonal and latitudinal variation, with column abundances ranging from 0.2 microns at equatorial latitudes to 60 microns over the northern winter polar latitudes. The detectability limit of the spectrometer was approximately 3 microns. I use a radiative transfer model based on the discrete ordinate method to calculate synthetic radiance spectra. When typical amounts of dust and cloud are present, significant underestimation of O3 occurs. A factor of 3 times as much O3 is needed to generate the same spectrum for cloudy, dusty atmospheres as for a clear atmosphere. If the scattering properties of Martian clouds and dust were well known, then their appearance would not be a problem, as a model would be capable of retrieving the O3 abundance. However, these properties are not well known, which raises doubts about the effectiveness of the current UV spectroscopy technique used to measure O3. Spatial and temporal variability in temperature and water vapor have been claimed to account for the scatter of the data points. However, water vapor is a small source of odd hydrogen in the winter polar atmosphere, and may not account for most of the variability. Masking by clouds and dust may also account for some of the observed O3 variability, because the nature and opacity of the clouds and dust in the polar hood change dramatically in latitude and even on a day-to-day basis. As the maximum O3 abundance resides near the surface, spacecraft must be able to observe through the entire cloud and dust abundance in order to actually see the total O3 column abundance. If reflectance spectroscopy is used, as on Mariner 9, then the cloud and the airborne dust must be traversed twice; first by the incoming solar flux down to the surface, and then once again upon reflection from the surface out to the spacecraft.

Lindner, Bernhard Lee↗

Extended long-wavelength lambda = 11-15-micron GaAs/Al(x)Ga(1-x)As quantum-well infrared photodetectors

Success has been achieved in extending the spectral wavelength of GaAs/Al(x)Ga(1-x)As quantum-well infrared photodetectors to significantly longer wavelengths of 11-15 micron. High responsivity of 0.5 A/W, high quantum efficiency of 12 percent, and high detectivity as well as an excellent noise equivalent temperature difference of 4 mK have been achieved at T = 50 K. High performance of 19 mK has also been achieved at an even higher temperature of 60 K.

Zussman, A.↗

High-power single-element pseudomorphic InGaAs/GaAs/AlGaAs single quantum well lasers for pumping Er-doped fiber amplifiers

A 980-nm-ridge waveguide pseudomorphic InGaAs/GaAs/AlGaAs single-quantum-well laser with a maximum single-ended output power of 240 mW from a facet-coated device is fabricated from a graded-index separate-confinement heterostructure grown by molecular-beam epitaxy. The laser oscillates in the fundamental spatial mode, allowing 22 percent coupling efficiency into a 1.55-micron single-mode optical fiber. Life testing at an output power of 30 mW per facet from uncoated devices reveals a superior reliability to GaAs/AlGaAs quantum-well lasers but also the need for protective facet coatings for long term reliability at power levels required for pumping Er-doped fiber amplifiers.

Larsson, A.↗

Absorption and photoluminescence of ultrathin pseudomorphic InAs/GaAs quantum wells

Absorption data are presented for 2-4-monolayer InAs/GaAs single quantum wells obtained at 77 K using a polarization-based measurement technique. The special contribution of the optical loss features arising from bulk GaAs was minimized using the polarization selectivity of absorption in single quantum wells. The double structure observed in the spectra is attributed to transitions involving confined heavy holes and both confined and unconfined electron states.

Ksendzov, A.↗

Anomalous capacitance of quantum well double-barrier diodes

The S-parameters of several different quantum well double barrier diodes have been measured. A technique has been developed for measuring whisker contacted diodes with an HP 8510B automatic network analyzer. Special coaxial mounts using K-connectors were designed to enable measurements up to 20 GHz. The voltage-dependent conductance and capacitance were derived from the measured reflection coefficient of each device. The C/V characteristics were observed to exhibit an anomalous increase at voltages corresponding to the negative differential resistance region (NDR). These are the first reported S-parameter measurements in the negative differential resistance region of quantum well double barrier diodes. A theory is presented that explains, in part, the observed results.

Boric, Olga↗

Resonant tunneling through mixed quasibound states in a triple-well structure

A triple-well resonant-tunneling structure made from the In(0.53)Ga(0.47)As/AlAs material system yields a broad negative differential resistance (NDR) region without the precipitous drop in current that occurs in single-well structures. This NDR characteristic is attributed to resonant tunneling through mixed quasi-bound states. A diode made from this structure is used to generate a nearly constant power of 0.5 mW up to 16 GHz.

Brown, E. R.↗

On well-partial-order theory and its application to combinatorial problems of VLSI design

We nonconstructively prove the existence of decision algorithms with low-degree polynomial running times for a number of well-studied graph layout, placement, and routing problems. Some were not previously known to be in p at all; others were only known to be in p by way of brute force or dynamic programming formulations with unboundedly high-degree polynomial running times. Our methods include the application of the recent Robertson-Seymour theorems on the well-partial-ordering of graphs under both the minor and immersion orders. We also briefly address the complexity of search versions of these problems.

Fellows, M.↗

How well was total ozone abundance inferred with Mariner 9?

Ozone is a key to understanding atmospheric chemistry on Mars. Over 20 photochemical models of the martian atmosphere have been published, and O3 is often used as a benchmark for these models. O3 abundance has been inferred from instrumentation on several spacecraft, with the most complete coverage provided by Mariner 9. The Mariner 9 UV spectrometer scanned from 2100 to 3500 Angstroms with a spectral resolution of 15 Angstroms and an effective field-of-view of approximately 300 sq km. The only atmospheric absorption in the 2000 to 3000 A wavelength region was previously assumed to come from the Hartley band system of ozone, which has an opacity of order unity at winter polar latitudes. Therefore, the amount of ozone was inferred by fitting this absorption feature with laboratory data of ozone absorption. Mars O3 shows strong seasonal and latitudinal variation, with column abundances ranging from 0.2 micron-atm at equatorial latitudes to 60 micron-atm over northern winter polar latitudes (1 micron-atm is a column abundance of 2.689 x 10 exp 15 molecules cm(exp -2)). However, the O3 abundance is never great enough to significantly affect atmospheric temperatures or surface temperatures and frost amounts. Some of the previously-inferred O3 abundances are shown. A radiative transfer computer model is used to re-examine the Mariner 9 UV spectra. Assuming a constant mixing ratio for O3 and no chemical or radiative interaction between O3 and clouds/dust, it is shown that when typical amounts of dust and cloud are present that significant underestimation of O3 abundance occurs. A factor of 3 times as much O3 is needed to generate the same spectrum the spacecraft would measure for a cloudy, dusty atmosphere as for a clear atmosphere. If the scattering properties of martian clouds and dust were well known, then their appearance would not be a problem, as a model would be capable of retrieving the O3 abundance. However, these properties are not well known, which raises doubts about the effectiveness of the UV reflectance spectroscopy technique for measuring O3 abundance on Mars.

Lindner, Bernhard Lee↗

Quantum-well lasers for direct solar photopumping

Semiconductor lasers directly photopumped by focused sunlight may be viable sources of coherent light for intersatellite communications and other low-power spaceborne applications. In this work, we theoretically explore the possibility of realizing such devices. We specifically assess solar pumped operation of separate-confinement-quantum-well heterostructure (SCQWH) lasers based on InGaAs, GaAs, and AlGaA, as fabrication technology for these lasers is mature and they can operate at very low thresholds. We develop a model for step-index single-well SCQWH lasers photopumped by sunlight, examine how threshold solar photoexcitation intensities depend upon material and structure parameters, design optimum structures for solar-pumped operation, and identify design tradeoffs. Our results suggest that laser action should be possible in properly designed structures at readily achievable solar concentrations and that optimum designs for solar-pumped SCQWH lasers differ significantly from those for analogous current injection devices.

Unnikrishnan, Sreenath↗

The JPL deep-well mid-infrared array camera

We describe the development of a mid-infrared camera intended for use at the Palomar 5-m telescope and at the NASA Infrared Telescope Facility. The camera is based on Rockwell's HF-16 128x128 Si:As blocked impurity band (BIB) array. This array is unusual in that it has a well depth of approximately 30 million electrons; this will allow the use of traditional broadband astronomical filters (N and Q) while keeping a reasonable field-of-view. Measured array performance indicates that it has a read noise of 1100 electrons and shows non-linearities of less than 1% up to 65% of full well. In this paper, we discuss the array and its operating characteristics, and we give a brief overview of the camera design.

Ressler, Michael E.↗

Quantum state transfer in double-quantum-well devices

A Monte Carlo simulation of double-quantum-well (DQW) devices is presented in view of analyzing the quantum state transfer (QST) effect. Different structures, based on the AlGaAs/GaAs system, were simulated at 77 and 300 K and optimized in terms of electron transfer and device speed. The analysis revealed the dominant role of the impurity scattering for the QST. Different approaches were used for the optimization of QST devices and basic physical limitations were found in the electron transfer between the QWs. The maximum transfer of electrons from a high to a low mobility well was at best 20%. Negative differential resistance is hampered by the almost linear rather than threshold dependent relation of electron transfer on electric field. By optimizing the doping profile the operation frequency limit could be extended to 260 GHz.

Jakumeit, Jurgen↗