Search NASA⌕ Search

SEARCH · Search NASA

Results for “Writing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Writing Competitive Proposals [Slides]

A proposal is a written response to an opportunity offered by a funding organization. Proposals must meet a SOLICITOR’S needs, not YOUR needs. A solicited proposal is a written response to a specific solicitation issued by a sponsor. These solicitations are typically called RFPs, or Requests for Proposals. RFPs are specific in their requirements regarding format and technical content. Scientists at Los Alamos often deal with this type of proposal — Laboratory-Directed Research and Development (LDRD) proposals are one example. An unsolicited proposal is one submitted to a sponsor who has not issued a specific solicitation. It usually comes about during interactions at meetings or conferences. In some instances, a sponsor may be visiting for another reason when the possibility for an unsolicited proposal becomes available. A pre-proposal is one in which a sponsor wishes to gage competition before having participants prepare a formal, full-length proposal. These types of scenarios imply that the actual proposal could be highly competitive and will usually be by invitation only.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Direct Write of 3D Nanoscale Mesh Objects with Platinum Precursor via Focused Helium Ion Beam Induced Deposition

The next generation optical, electronic, biological, and sensing devices as well as platforms will inevitably extend their architecture into the 3rd dimension to enhance functionality. In focused ion beam induced deposition (FIBID), a helium gas field ion source can be used with an organometallic precursor gas to fabricate nanoscale structures in 3D with high-precision and smaller critical dimensions than focused electron beam induced deposition (FEBID), traditional liquid metal source FIBID, or other additive manufacturing technology. In this work, we report the effect of beam current, dwell time, and pixel pitch on the resultant segment and angle growth for nanoscale 3D mesh objects. We note subtle beam heating effects, which impact the segment angle and the feature size. Additionally, we investigate the competition of material deposition and sputtering during the 3D FIBID process, with helium ion microscopy experiments and Monte Carlo simulations. Our results show complex 3D mesh structures measuring ~300 nm in the largest dimension, with individual features as small as 16 nm at full width half maximum (FWHM). These assemblies can be completed in minutes, with the underlying fabrication technology compatible with existing lithographic techniques, suggesting a higher-throughput pathway to integrating FIBID with established nanofabrication techniques.

36 MATERIALS SCIENCE↗

Pulsed Laser-Assisted Helium Ion Nanomachining of Monolayer Graphene—Direct-Write Kirigami Patterns

A helium gas field ion source has been demonstrated to be capable of realizing higher milling resolution relative to liquid gallium ion sources. One drawback, however, is that the helium ion mass is prohibitively low for reasonable sputtering rates of bulk materials, requiring a dosage that may lead to significant subsurface damage. Manipulation of suspended graphene is, therefore, a logical application for He+ milling. We demonstrate that competitive ion beam-induced deposition from residual carbonaceous contamination can be thermally mitigated via a pulsed laser-assisted He+ milling. By optimizing pulsed laser power density, frequency, and pulse width, we reduce the carbonaceous byproducts and mill graphene gaps down to sub 10 nm in highly complex kiragami patterns.

36 MATERIALS SCIENCE↗

Metallo‐Hydrogel‐Assisted Synthesis and Direct Writing of Transition Metal Dichalcogenides

Abstract Two dimensional (2D) transition metal dichalcogenides (TMDCs) have attracted interest for their compelling nanoscale new properties and numerous potential applications including fast optoelectronic devices, ultrathin photovoltaics, and high‐performance catalysts. Large‐scale growth of uniform TMDC materials is essential for investigating their physics and for their integration into devices. However, the wafer scale deposition of TMDCs on arbitrary nonselective substrates is still beyond the current state‐of‐the‐art. In this article, a method to synthesize layered TMDCs (MoS 2 and WS 2 ) at the wafer‐scale by sulfurization of transition metal ions (Mo 5+ and W 6+ ) in a gelatin template (metallo‐hydrogel) is reported. This process is adaptable to versatile substrates, including amorphous silicon oxide, high‐temperature quartz, and silicon. Although the products are nominally few layer materials, direct band photoluminescent (≈1.8 eV), similar to single‐ or decoupled multilayer MoS 2 is observed. Finally, the solution‐based deposition enables contact printing of TMDC channels to be useable for device applications including thin film transistors with printed silver contacts using the same process.

Zang, Xining↗

Scanning Probe Direct-Write of Germanium Nanostructures

Bottom-up nanostructure synthesis has played a pivotal role in the advancement of nanoscale science. This approach is typically less labor and energy intensive than its topdown counterpart because only the required amount of material is grown from a chosen precursor, rather than a macroscopic object being chiseled down to the desired size. However, device integration often requires complex manipulation steps for placing the synthesized nano-object in the appropriate location.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Using Ambient Ion Beams to Write Nanostructured Patterns for Surface Enhanced Raman Spectroscopy

Electrolytic spray deposition was used to pattern surfaces with 2D metallic nanostructures. Spots that contain silver nanoparticles (AgNP) were created by landing solvated silver ions at desired locations using electrically floated masks to focus the metal ions to an area as little as 20 mm in diameter. The AgNPs formed are unprotected and their aggregates can be used for surface-enhanced Raman spectroscopy (SERS). The morphology and SERS activity of the NP structures were controlled by the surface coverage of landed silver ions. The NP structures created could be used as substrates onto which SERS samples were deposited or prepared directly on top of predeposited samples of interest. The evenly distributed hot spots in the micron-sized aggregates had an average SERS enhancement factor of 108. The surfaces showed SERS activity when using lasers of different wavelengths (532, 633, and 785 nm) and were stable in air.

Environmental Molecular Sciences Laboratory↗

Nonlinear viscoelastic response of silicone additively manufactured direct ink write (DIW) foams under repetitive compression

To investigate dynamic fatigue behavior of foam in military protective applications, such as helmets, additively manufactured (AM) foams were compressively strained into the plateau region using a reduced design of experiments. A simple power law was found to govern the decline in dynamic stiffness (complex modulus) as the foams underwent the purchase order requirement of 10,000 cycles of small deformation in the plateau region. This rate of decline was newly found to correlate with the degree of nonlinearity in the material’s deformation, quantified using total harmonic distortion. Materials with low nonlinearity exhibited relatively stable stiffness across cycles, while those with high nonlinearity experienced greater losses. The observed nonlinearity depended on both applied stress and strain rate. A strong linear correlation (R 2 = 0.78) was identified between second-order nonlinearity and the time-dependent stiffness response. Two lattice structures were examined: face-centered tetragonal (FCT) and simple cubic (SC). The SC material exhibited higher total harmonic distortion (5%) and lower stiffness retention than the FCT (2%). In conclusion, these results suggest that for cyclic compression applications in a wide variety of industries such as packaging, personal protective equipment, or aerospace, selecting materials with lower stress and greater structural uniformity can enhance the stability of dynamic performance.

42 ENGINEERING↗

Modification of the plasma-prepared As–Se–Te films and creation on their base the planar waveguides by continuous laser writing

As a result of the previous experiments (Mochalov et al. in Opt Quant Electron 49(8):274:1–274:11, 2017), it was found that the Te-based chalcogenide films prepared by plasma deposition have a transparency window in the range from 1.2 to 20 μm and cannot be modified in the two-photon absorption mode, and in the linear absorption mode only the thermal effects were observed leading to crystallization of the films or their destruction. In this work, PECVD-prepared As–Se–Te films were modified by continuous laser irradiation of different wavelengths—473, 632.8 and 808 nm. For the modification, samples with compositions As{sub 40}Se{sub 50}Te{sub 10} and As{sub 40}Se{sub 44}Te{sub 16} were deposited on a substrate of epi-polished crystalline sapphire. This paper presents the results of studying of the effect of continuous laser radiation on the optical and structural properties of the chalcogenide films samples. Also, planar waveguided structures based on the As–Se–Te films were formed and investigated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Direct Write Assembly of Graphene/Poly(ε-Caprolactone) Composite Scaffolds and Evaluation of Their Biological Performance Using Mouse Bone Marrow Mesenchymal Stem Cells

Scaffold and mesenchymal stem cell–based cartilage tissue engineering offers a favorable way for the repair and regeneration of injured cartilage. In this study, poly (ε-caprolactone) PCL scaffolds with grid-like structure having periodic lattice was manufactured by robocasting method in the presence of graphene nanoplatelets for cartilage tissue engineering applications. For this purpose, a PCL solution (20 wt%) containing pristine graphene nanopowders in the form of platelets was prepared as printing ink and it was dispensed through a nozzle at room temperature to an ethanol bath at 4 °C. The construction of porous scaffolds was made by a layer-by-layer assembly. Results revealed that graphene additions were not detrimental to deposition process and the structure of the resultant scaffolds. In vitro cell tests indicated that the prepared grid-like graphene/PCL composite scaffolds have good cytocompatibility and non-toxicity for mouse bone marrow mesenchymal stem cells. The stem cells attached and proliferated well on the scaffolds and they also demonstrated a chondrogenic differentiation in the absence of transforming growth factors.

60 APPLIED LIFE SCIENCES↗

Combining direct ink writing with reactive melt infiltration to create architectured thermoelectric legs

Here, we present a new additive-reactive synthesis method where inks – cast into molds or 3D-additively extruded into architectured shapes – are reacted into intermetallic thermoelectric compounds. The new method, as demonstrated for equiatomic TiNiSn, combines: (i) extrusion printing (or casting) of inks containing Ni and Ti powders, (ii) debinding and reactive sintering to form a porous NiTi network, (iii) network infiltration with liquid Sn and subsequent reaction to synthesize the TiNiSn phase. Thin plates, created through this method, show high phase purity and low residual porosity. A thermoelectric figure of merit zT = 0.47 ± 0.05 is achieved at 800 K, within the broad range of values (zT= 0.3–1.0) reported for TiNiSn created via traditional powder hot-pressing methods. Layered TiNiSn microlattices – after 3D ink-extrusion printing and infiltration – exhibit high relative densities and minimal undesirable secondary phase content, with a Seebeck coefficient on par with the ink-cast TiNiSn plates, demonstrating that thermoelectric legs with far-ranging architectural freedom can be created additively with this novel reactive manufacturing method. Numerous other thermoelectric (and other) compounds, currently limited to basic geometries due to brittleness, are amenable to this new method based on a sequence of reactive sintering/infiltration of cast or ink-extruded precursors.

36 MATERIALS SCIENCE↗

Development of direct ink write radially graded alumina/zirconia

Functionally graded materials (FGMs) are of interest in multiple fields, yet many materials combinations are limited by coefficient of thermal expansion (CTE) mismatch. Here, a radially graded alumina/yttria-doped zirconia (Al 2 O 3 /8YZ) FGM is used to demonstrate processing strategies to mitigate CTE and sintering behavior differences between these oxides. FGM materials are especially sensitive to ink stability during printing, as all components (in this case, Al 2 O 3 and 8YZ) must be stabilized in the same dispersant or additive solution. Thus, this system is also ideal to demonstrate ink optimization best practices. Materials were characterized throughout processing to correlate the effects of common additives on both the ceramic particle suspensions and final sintered components. Aggregation observed in the initial additive-containing suspensions were present in the sintered component. The differences in sintering onset temperature and shrinkage rate resulted in internal stresses within the sintered component, which ultimately caused mechanical failure of the component under low stress. In conclusion, a processing strategy was recommended to mitigate the sintering behavior mismatch of alumina and 8 wt% yttria-stabilized zirconia.

Lamm, Benjamin W. [Oak Ridge National Laboratory (↗