Search NASA⌕ Search

SEARCH · Search NASA

Results for “ab initio calculations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Theoretical study of the photodissociation of HOCl

A study of the UV photodissociation of hypochlorous acid is conducted on the basis of ab initio SCF-Cl calculations. These calculations show that HOCl has only a single peak in the UV photoabsorption spectrum at 220 nm. This result implies that HOCl would have a long lifetime for photodissociation if it were to be formed in the stratosphere. The photodissociation products of HOCl have been identified as Cl+OH, based on an examination of the topographies of the excited electronic state potential energy surfaces. The results of this study indicate that HOCl could be a significant reservoir for stratospheric chlorine.

Jaffe, R. L.↗

The nature of the metal-CO interaction and bonding

The adsorption of CO on metal surfaces is represented by molecular orbital cluster models of CO at an on top site and adsorbed normal to the surface carbon end down. Ab initio SCF and MCSCF calculations are performed for several clusters. The new constrained space orbital variation CSOV approach is used to analyze the bonding and to compare CO adsorption on Al, representative of sp metals, with that on Cu, representative of transition metals. There is a large repulsion between the superposed free CO and metal charge distributions which is considerably smaller for Cu than for Al because there are fewer valence sigma electrons for Cu than for Al. The CSOV analysis shows that the metal to CO pi donation is much more important than the CO to metal sigma donation. It is also shown that for Cu, the d pi contribution to the metal pi donation is larger than the valence 4p pi contribution. The d pi donation is compared between Fe, Ni, and Cu and this donation and the metal-CO interaction are found to be different in the order Fe greater than Ni greater than Cu.

Bagus, P. S.↗

Theoretical investigation of the interstellar CH3NC/CH3CN ratio

Calculations have been performed to determine the abundance ratio of the metastable isomer CH3NC to the stable isomer CH3CN in dense interstellar clouds. According to gas phase, ion-molecule treatments, these molecules are both synthesized via protonated ion precursors. A calculation has been made of the ratio of the formation rates of the protonated precursor ions, CH3NCH(+) and CH3CNH(+), synthesized via the radiative association reaction between CH3(+) and HCN, which is thought to be the dominant formation process of the two isomeric ions. The calculations, which involve both ab initio quantum chemistry and equilibrium determinations, lead to a predicted CH3NCH(+)/CH3CNH(+) formation rate ratio between 0.1 and 0.4. If this ratio is maintained in the neutral species formed from the precursor ions, theory predicts a sizable abundance for methyl isocyanide (CH3NC) and lends credence to its tentative observation.

Defrees, D. J.↗

Collision integrals for the interaction of the ions of nitrogen and oxygen in a plasma at high temperatures and pressures

The corrections to the transport cross-sections and collision integrals for Coulomb interactions arising from the application of realistic interaction energies of the ions of nitrogen and oxygen are investigated. Accurate potential-energy curves from an ab initio electronic-structure calculation and a semiclassical description of the scattering are used to determine the difference between the cross-sections for the real interaction forces and a Coulomb force for large values of the Debye shielding parameter. Graphs of the correction to the diffusion and viscosity-collision integrals are presented for temperatures from about 10,000 K to 150,000 K. This correction can be combined with tabulations of the collision integrals for shielded Coulomb potentials to determine the contribution of N(+)-N(+), N(+)-O(+), and O(+)-O(+) interactions to the transport properties of high-temperature air. Analytical forms are fitted to the calculated results to assist this application.

Stallcop, James R.↗

The vibrational frequencies of difluoroethyne

Ab initio coupled-cluster calculations with single and double excitations and with a perturbational treatment of connected triple excitations are reported for difluoroethyne using large basis sets. The results for the transbending mode nu-4 are extremely sensitive to electron correlation and basis set effects. The best theoretical and experimental estimates for the fundamental vibrational frequencies are in excellent agreement.

Breidung, Juergen↗

Ab initio studies of dissociative recombination

Quantum chemical calculations of the dissociative recombination of O2(+) and N2(+) are reported. An approach for calculating autoionization widths from high-principal-quantum-number Rydberg states is summarized, and an example is presented for the lowest dissociative state of O2. For O2(+), the 1Sigma(+)u state is the sole source of O(1S) from the lowest 10 vibrational levels of the ion. Rate coefficients for generating O(1S) and O(1D) at ionospheric temperatures are reported.

Guberman, Steven L.↗

Dynamics of the collinear Be + FH yielding BeF + H reaction

Results of a study of the collinear reaction Be + FH(nu1) yielding BeF(nu2) + H are summarized. The surface was obtained by an ab initio first-order wave function CI calculation. Dynamics were studied using quasi-classical trajectories. A comparison study was made using a LEPS surface with similar characteristics. The ab initio surface was found to give rise to quite special results. Because of interest in the analogous Ba + HF system, the effect of varying the mass of the atom was observed.

Schor, H.↗

Theoretical calculation of ozone vibrational infrared intensities

An ab initio dipole moment function for ozone has been computed using the CASSCF (complete active space self-consistent field) method, and forms the basis for a calculation of ozone infrared band intensities. Vibrational wave functions were generated using the variational method with potential energy surfaces derived from experimental force constants. Computed values of the permanent dipole moment, dipole moment derivatives, and infrared band strengths are all found to be in remarkably good agreement with experiment. Intensities are predicted for hot bands for which experimental values are unavailable, and implications for atmospheric ozone spectroscopy are discussed. As the dipole moment matrix element signs are now established for nearly all of the observed bands, further refinement of the dipole moment function is possible.

Adler-Golden, S. M.↗

First-Principles Investigation of Phase Transitions in RuNb, RuTa, and Ru-Nb-Ta Ultrahigh Temperature Shape Memory Alloys

Ultrahigh temperature shape memory alloys (UHT-SMAs) have transition temperatures above 600 C, and they have found applications for sensing and actuating devices in aerospace industry. Among very few such UHT-SMAs currently known are Ru-based alloys such as RuNb and RuTa, whose martensite structures and phase transitions are totally different from those of NiTi-based SMAs and were poorly understood. In this work, we carried out a systematical study of RuNb using first-principles total energy calculations and molecular dynamics (MD) simulations. The transition paths and mechanisms in cubic → tetragonal →monoclinic transitions are revealed. and the transition sequence and martensitic transition temperatures are determined (MTTs) by evaluating the Gibbs free energies using thermodynamic integration. The calculated MTTs are in very good agreement with the experimental data. We found that the monoclinic phase at the second transition has the 𝑃21/m symmetry instead of experimentally identified 𝑃2/m. Our calculations demonstrate that RuTa has very similar phase transitions to those of RuTa. Furthermore, we studied the Ru0.5Nb0.25Ta0.25 ternary. Our results can explain the measured significant drop of MTT (~ 200 C) in the second transition for Ru0.5Nb0.25Ta0.25 compared with those of RuNb and RuTa, while in the first transition its MTT is between MTTs of RuNb and RuTa. The insights gained by this study and the verified ab initio methods for accurate MTT calculations can be applied to fast screen and quantitatively design novel UHT-SMAs having similar properties with desirable MTTs and much reduced cost.

Zhigang Wu↗

On the nature of the bonding in Cu2 - An ab initio viewpoint

The bonding in Cu2 has been calculatively investigated. A CASSCF calculation is performed where the two 4s electrons are distributed in all possible ways among the 4s and 4p orbitals. The CAS results have a 3d population of 9.99. The corresponding orbitals between the CAS core orbitals at r(e) and the atomic SCF core orbitals show an overlap of 13.9992 out of a possible 14, with all of the change in sigma space. Thus, the CAS results show virtually no change in the d orbitals relative to the atom and can be considered as showing only a single bond. The reduction in 3d population, the decrease in r(e), and the increase in D(e) upon correlating the 3d shell indicates that the 3d electrons are slightly involved in the bonding, but there is no indication of the formation of a triple bond.

Bauschlicher, C. W., Jr.↗

Theoretical study of the thioformyl ion

The equilibrium structure of the thioformyl ion has been determined from an ab initio matrix Hartree-Fock calculation, and an estimated rotation constant has been derived. A rotation constant of 21.7 GHz is obtained for HCS(+); the corresponding constant for DCS(+) is 18.3 GHz. If the vibration-rotation interaction constants for HCS(+) are assumed to be the same as those for HCP, then the rotation constant is 21.6 GHz, while the vibration-rotation constants of DCP give a rotation constant of 18.3 GHz for DCS(+).

Wilson, S.↗

Transition probabilities for the UV0.01 multiplet in N III

We report on large-scale ab initio multiconfiguration Hartree-Fock calculations for the UV0.01 multiplet, 2s(sup 2)2p(sup 2)P(sub J) - 2s2p(sup 2 4)P(sub J prime), in N III. The resulting transition probabilities agree very well with recent semiempirical calculations, and the lifetimes for two of the three upper levels agree with experiments. The deviation for the third level is discussed. Comparisons made with the highest quality IUE echelle spectra available -- those of RR Tel and V1016 Cyg (both photoionized sources with electron densities below 10(exp 8)/cu cm) -- show that computed branching ratios of lines sharing a common upper level are in agreement with observations to within uncertainties of +/- 10%. High-quality solar limb data or stellar data from the Hubble Space Telescope (HST) could, in principle, be used to determine whether the theoretical or measured lifetimes for the discrepant level are in error. Unfortunately, stellar data for high-density plasmas (N(sub e) greater than 10(exp 11)/cu cm are needed) do not yet exist, and existing solar data lack the photometric precision to address this problem.

Brage, Tomas↗

Recent Theoretical Studies On Excitation and Recombination

New advances in the theoretical treatment of atomic processes in plasmas are described. These enable not only an integrated, unified, and self-consistent treatment of important radiative and collisional processes, but also large-scale computation of atomic data with high accuracy. An extension of the R-matrix work, from excitation and photoionization to electron-ion recombination, includes a unified method that subsumes both the radiative and the di-electronic recombination processes in an ab initio manner. The extensive collisional calculations for iron and iron-peak elements under the Iron Project are also discussed.

Pradhan, Anil K.↗

Toward an In-Depth Material Model for Cermet Nuclear Thermal Rocket Fuel Elements

The development and qualification of nuclear thermal propulsion (NTP) fuel element technologies would be aided by an in-depth model of material response and failure modes at operating conditions. Integrated computational materials engineering techniques have the potential to provide such a model, as demonstrated here through three case studies focused on a tungsten-uranium mononitride cermet fuel. The first case focuses on the erosion of tungsten (W, also named wolfram), a nominal coating/cladding material, in hot hydrogen. Ab initio techniques are used to calculate erosion rates and thermal expansion at NTP operating conditions. The second focuses on the stability of uranium mononitride (UN) fuels at high temperature and in the presence of hydrogen. Phase diagram techniques reveal potential instabilities and decomposition pathways at high hydrogen concentrations. The third focuses on using microstructure information to predict high temperature mechanical response and failure of tungsten, used in refractory cermet materials. Combined finite element and discrete dislocation dynamics techniques provide mechanical properties in agreement with experimental methods. The integration of these techniques for an all-encompassing material model is discussed.

cermet↗

Theoretical Studies of the Extra-terrestrial Chemistry of Biogenic Elements and Compounds

Results are presented on the following:(A) Ab initio quantum chemical studies of reactions in astrophysical ices.Theoretical electronic structure calculations were used to investigate reactions between formaldehyde (H2CO) and both hydrogen cyanide (HCN) and isocyanide (HNC) in search of other favorable reactions such as ammonia-formaldehyde addition, which was found in a recent theoretical study to be strongly enhanced when it occurs within cold ices.The present study examines further reactions between this product and H2CO in ices.(B) Heterogeneous hydrogenation of CO and H2CO on icy grain mantles.Formaldehyde (H2CO) and methanol (CH30H) are thought to be produced in the interstellar medium by the successive hydrogenation of carbon monoxide (CO) on grain surfaces. In the gas phase, the steps in which H adds to CO and H2CO possess modest barriers and are too inefficient to account for the observed abundances. Recent laboratory work has confirmed that formaldehyde and methanol are formed when H atoms are deposited on CO ice at 12 K. The present study employed ab initio quantum chemical calculations to investigate the impact of water ice on the sequential hydrogenation of CO.(C) Ice-bound condensed-phase reactions involving formic acid (HCOOH), methylenimine (CH2NH), hydrogen cyanide (HCN), hydrogen isocyanide (HNC), and ammonia ( 3) were investigated in order to characterize possible pathways to larger organic species that are efficient at the cold temperatures prevalent in cometary nuclei and the interstellar medium. (D) Pathways to glycine and other amino acids in ultraviolet-irradiated ices determined via quantum chemical modeling.(E) Photoionization in ultraviolet processing of astrophysical ice analogs at cryogenic temperatures.

Woon, David E.↗

An Accurate Quartic Force Field and Vibrational Frequencies for HNO and DNO

An accurate ab initio quartic force field for HNO has been determined using the singles and doubles coupled-cluster method that includes a perturbational estimate of the effects of connected triple excitations, CCSD(T), in conjunction with the correlation consistent polarized valence triple zeta (cc-pVTZ) basis set. Improved harmonic frequencies were determined with the cc-pVQZ basis set. Fundamental vibrational frequencies were determined using a second-order perturbation theory analysis and also using variational calculations. The N-0 stretch and bending fundamentals are determined well from both vibrational analyses. The H-N stretch, however, is shown to have an unusually large anharmonic correction, and is not well determined using second-order perturbation theory. The H-N fundamental is well determined from the variational calculations, demonstrating the quality of the ab initio quartic force field. The zero-point energy of HNO that should be used in isodesmic reactions is also discussed.

Dateo, Christopher E.↗