SEARCH · Search NASA

Results for “aircraft performance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

All sources NASA NTRS DOE OSTI

NASA NTRS1999

Development of Airport Surface Required Navigation Performance (RNP)

The U.S. and international aviation communities have adopted the Required Navigation Performance (RNP) process for defining aircraft performance when operating the en-route, approach and landing phases of flight. RNP consists primarily of the following key parameters - accuracy, integrity, continuity, and availability. The processes and analytical techniques employed to define en-route, approach and landing RNP have been applied in the development of RNP for the airport surface. To validate the proposed RNP requirements several methods were used. Operational and flight demonstration data were analyzed for conformance with proposed requirements, as were several aircraft flight simulation studies. The pilot failure risk component was analyzed through several hypothetical scenarios. Additional simulator studies are recommended to better quantify crew reactions to failures as well as additional simulator and field testing to validate achieved accuracy performance, This research was performed in support of the NASA Low Visibility Landing and Surface Operations Programs.

Cassell, Rick↗

NASA NTRS2008

Limits to Open Class Performance?

This presentation discusses open or unlimited class aircraft performance limitations and design solutions. Limitations in this class of aircraft include slow climbing flight which requires low wing loading, high cruise speed which requires high wing loading, gains in induced or viscous drag alone which result in only half the gain overall and other structural problems (yaw inertia and spins, flutter and static loads integrity). Design solutions include introducing minimum induced drag for a given span (elliptical span load or winglets) and introducing minimum induced drag for a bell shaped span load. It is concluded that open class performance limits (under current rules and technologies) is very close to absolute limits, though some gains remain to be made from unexplored areas and new technologies.

Bowers, Albion H.↗

NASA NTRS1969

Influence of drag on the mission performance of hypersonic aircraft.

Drag influence on mission performance of hypersonic aircraft during climb and cruise, noting payload capacity

Levy, L. L., Jr.↗

NASA NTRS1972

An investigation of vehicle dependent aspects of terminal area ATC operation.

Description of a terminal area simulation which permits analysis and synthesis of current and advanced air traffic management system configurations including ground and airborne instrumentation and new and modified aircraft characteristics. Ground elements in the simulation include navigation aids, surveillance radars, communication links, air-route structuring, ATC procedures, airport geometries, and runway handling constraints. Airborne elements include traffic samples with individual aircraft performance and operating characteristics and aircraft navigation equipment. The simulation also contains algorithms for conflict detection, conflict resolution, sequencing and pilot-controller data links.

Britt, C. L., Jr.↗

NASA NTRS1995

Stealth Aircraft Technology. (Latest Citations from the Aerospace Database)

The bibliography contains citations concerning design, manufacture, and history of aircraft incorporating stealth technology. Citations focus on construction materials, testing, aircraft performance, and technology assessment. Fighter aircraft, bombers, missiles, and helicopters represent coverage. (Contains 50-250 citations and includes a subject term index and title list.)

AIRCRAFT↗

NASA NTRS2015

System and Method for Dynamic Aeroelastic Control

The present invention proposes a hardware and software architecture for dynamic modal structural monitoring that uses a robust modal filter to monitor a potentially very large-scale array of sensors in real time, and tolerant of asymmetric sensor noise and sensor failures, to achieve aircraft performance optimization such as minimizing aircraft flutter, drag and maximizing fuel efficiency.

Suh, Peter M.↗

NASA NTRSDate not supplied

Development of an Inertia Relief Method for Aircraft with Dissimilar Engines in LEAPS

Weight estimation is a critical element of the aircraft conceptual design process. The Layered and Extensible Aircraft Performance System (LEAPS) is an aircraft conceptual design tool that is under development by the Systems Analysis and Concepts Directorate (SACD) at the NASA Langley Research Center. LEAPS includes modules that represent aircraft design disciplines. This work presents an update to the LEAPS wing weight estimation method to allow for engine inertia relief to be accurately accounted for when analyzing aircraft with multiple dissimilar engines.

LEAPS↗

NASA NTRSDate not supplied

Development of an Inertia Relief Method for Aircraft with Dissimilar Engines in LEAPS

LEAPS↗

NASA NTRS1983

Analysis and methodology for aeronautical systems technology program planning

A structured methodology was developed that allows the generation, analysis, and rank-ordering of system concepts by their benefits and costs, indicating the preferred order of implementation. The methodology is supported by a base of data on civil transport aircraft fleet growth projections and data on aircraft performance relating the contribution of each element of the aircraft to overall performance. The performance data are used to assess the benefits of proposed concepts. The methodology includes a computer program for performing the calculations needed to rank-order the concepts and compute their cumulative benefit-to-cost ratio. The use of the methodology and supporting data is illustrated through the analysis of actual system concepts from various sources.

White, M. J.↗

NASA NTRS2018

Turboelectric and Hybrid Electric Aircraft Drive Key Performance Parameters

NASA has been investigating electrified aircraft propulsion as a means of furthering its goals of reducing fuel burn, emissions, and noise. However, the electric drive components required introduce weight and efficiency penalties at odds with these goals. The purpose of this paper is to propose electric drive specific power, electric drive efficiency, and electrical propulsion fraction as the key performance parameters for fully turboelectric, partially turboelectric, and parallel hybrid electric aircraft power systems. The impacts of these parameters on overall aircraft performance are investigated. Range equations for each aircraft type are described. The benefits and costs that may result from the electrified propulsion systems are enumerated. A breakeven analysis is conducted to find the minimum allowable electric drive specific power and efficiency, for a given electrical propulsion fraction and battery specific energy, that can preserve the range, payload weight, input energy, and ratio of operating empty weight to initial weight of the conventional aircraft.

turboelectric aircraft propulsion↗

NASA NTRS2018

Turboelectric and Hybrid Electric Aircraft Drive Key Performance Parameters

NASA has been investigating electrified aircraft propulsion as a means of furthering its goals of reducing fuel burn, emissions, and noise. However, the electric drive components required introduce weight and efficiency penalties at odds with these goals. The purpose of this paper is to propose electric drive specific power, electric drive efficiency, and electric propulsion fraction as the key performance parameters for fully turboelectric, partially turboelectric, and parallel hybrid electric aircraft power systems. The impact of these parameters on overall aircraft performance are investigated. Range equations for each aircraft type are described. The benefits and costs that may result from the electrified propulsion systems are enumerated. A breakeven analysis is conducted to find the minimum allowable electric drive specific power and efficiency, for a given electrical propulsion fraction and battery specific energy, that can preserve the range, payload weight, input energy, and ratio of operating empty weight to initial weight of the conventional aircraft.

Duffy, Kirsten P.↗

NASA NTRS1977

Applications of advanced V/STOL aircraft concepts to civil utility missions, volume 1

The suitability of advanced V/STOL aircraft to civil utility applications was assessed for offshore oil support, forest fire support, transport, and humanitarian missions. The aircraft concepts considered were a lift fan aircraft, a tilt rotor aircraft, and an advanced helicopter. All the aircraft had a design payload of 2,268 kg. (5,000 lb.) with the maximum range varying from 2,224 km. (1,800 nm) for the lift fan STOL to 1,482 km (800 nm) for the advanced helicopter. The analysis of these missions considered such factors as aircraft performance, annual utilization, initial cost, and operating cost. It is concluded that all the advanced V/STOL aircraft concepts generally performed these missions better than contemporary aircraft. The lift fan aircraft and the tilt rotor aircraft were found to be effective for the offshore oil and the forest fire support missions. The lift fan aircraft in the VTOL mode was also found to be very attractive for the executive transport mission where the passenger time value was $30/hr. or more.

Source record↗

NASA NTRS1976

A fuselage/tank structure study for actively cooled hypersonic cruise vehicles, summary

A detailed analytical study was made to investigate the effects of fuselage cross section (circular and elliptical) and the structural arrangement (integral and nonintegral tanks) on aircraft performance. The vehicle was a 200 passenger, liquid hydrogen fueled Mach 6 transport designed to meet a range goal of 9.26 Mn (5000 NM). A variety of trade studies were conducted in the area of configuration arrangement, structural design, and active cooling design in order to maximize the performance of each of three point design aircraft: (1) circular wing-body with nonintegral tanks, (2) circular wing-body with integral tanks and (3) elliptical blended wing-body with integral tanks. Aircraft range and weight were used as the basis for comparison. The resulting design and performance characteristics show that the blended body integral tank aircraft weights the least and has the greatest range capability, however, producibility and maintainability factors favor nonintegral tank concepts.

Pirrello, C. J.↗

NASA NTRS2011

Surveillance Range and Interference Impacts on Self-Separation Performance

Self-separation is a concept of flight operations that aims to provide user benefits and increase airspace capacity by transferring traffic separation responsibility from ground-based controllers to the flight crew. Self-separation is enabled by cooperative airborne surveillance, such as that provided by the Automatic Dependent Surveillance-Broadcast (ADSB) system and airborne separation assistance technologies. This paper describes an assessment of the impact of ADS-B system performance on the performance of self-separation as a step towards establishing far-term ADS-B performance requirements. Specifically, the impacts of ADS-B surveillance range and interference limitations were analyzed under different traffic density levels. The analysis was performed using a batch simulation of aircraft performing self-separation assisted by NASA s Autonomous Operations Planner prototype flight-deck tool, in two-dimensional airspace. An aircraft detected conflicts within a look-ahead time of ten minutes and resolved them using strategic closed trajectories or tactical open maneuvers if the time to loss of separation was below a threshold. While a complex interaction was observed between the impacts of surveillance range and interference, as both factors are physically coupled, self-separation performance followed expected trends. An increase in surveillance range resulted in a decrease in the number of conflict detections, an increase in the average conflict detection lead time, and an increase in the percentage of conflict resolutions that were strategic. The majority of the benefit was observed when surveillance range was increased to a value corresponding to the conflict detection look-ahead time. The benefits were attenuated at higher interference levels. Increase in traffic density resulted in a significant increase in the number of conflict detections, as expected, but had no effect on the conflict detection lead time and the percentage of conflict resolutions that were strategic. With surveillance range corresponding to ADS-B minimum operational performance standards for Class A3 equipment and without background interference, a significant portion of conflict resolutions, 97 percent, were achieved in the preferred strategic mode. The majority of conflict resolutions, 71 percent, were strategic even with very high interference (over three times that expected in 2035).

Idris, Husni↗

NASA NTRS1993

Design of a flight control system for a highly maneuverable aircraft using mu synthesis

This paper presents a methodology for the design of longitudinal controllers for high performance aircraft operating over large ranges of angle of attack. The technique used for controller design is structured singular value or mu synthesis. The controller is designed to minimize the weighted H-infinity norm of the error between the aircraft response and the desired handling quality specifications without saturating the control actuators. The mu synthesis procedure ensures that the stability and performance of the aircraft is robust to parameter variations and modeling uncertainties included in the design model. Nonlinear simulations demonstrate that the controller satisfies handling quality requirements and provides excellent tracking of pilot inputs over a wide range of transient angles of attack and Mach number.

Reiner, Jacob↗

NASA NTRS2016

UAS in the NAS Flight Test Series 4 Overview

Flight Test Series 4 (FT4) provides the researchers with an opportunity to expand on the data collected during the first flight tests. Following Flight Test Series 3, additional scripted encounters with different aircraft performance and sensors will be conducted. FT4 is presently planned for Spring of 2016 to ensure collection of data to support the validation of the final RTCA Phase 1 DAA (Detect and Avoid) Minimum Operational Performance Standards (MOPS). There are three research objectives associated with this goal: Evaluate the performance of the DAA system against cooperative and non-cooperative aircraft encounters Evaluate UAS (Unmanned Aircraft Systems) pilot performance in response to DAA maneuver guidance and alerting with live intruder encounters Evaluate TCAS/DAA (Traffic Alert and Collision Avoidance System/Detect and Avoid) interoperability. This flight test series will focus on only the Scripted Encounters configuration, supporting the collection of data to validate the interoperability of DAA and collision avoidance algorithms.

flight test↗

NASA NTRS1975

Minimization of jet and core noise of a turbojet engine by swirling the exhaust flow

A noise abating improvement for jet engines has been investigated and demonstrated using a full scale turbojet engine which provided the means for significant reductions in jet and core noise with minimal thrust loss. This was accomplished by controlled solid body rotation (swirling) of the flow in the nozzle and jet exhaust. Relatively moderate angles of solid body rotation in the presence of temperature, density, pressure, and velocity gradients were utilized. Of great interest was the finding that significant reductions of sound pressure levels and sound power were obtained with only a small percentage of the total primary mass flow swirling at the exit of the nozzle. Therefore, tradeoffs between noise reduction and engine performance can be optimized to satisfy aircraft performance and federal noise standards with minimal wasted rotational kinetic energy.

Schwartz, I. R.↗

NASA NTRS1977

Nonaxisymmetric nozzle technology program - An overview

Nonaxisymmetric nozzles, with in-flight thrust vectoring and/or reversing capabilities, provide the potential for substantial gains in fighter aircraft performance, maneuvering, survivability and ground handling. This paper presents an overview of some of the current programs to develop nonaxisymmetric nozzle technology for future aircraft applications. The initial phase of this program, which consists of a series of subscale model tests, engine/nozzle studies, system integration studies and simulation studies, has been initiated. Successful completion of this program will allow designers of future aircraft to consider, with high confidence, the integration of nonaxisymmetric nozzle concepts to improve aircraft mission performance effectiveness, survivability and cost.

Berrier, B. L.↗