Search NASA⌕ Search

SEARCH · Search NASA

Results for “alkalinity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Alkaline salt-promoted construction of hydrophilic and nitrogen deficient graphitic carbon nitride with highly improved photocatalytic efficiency

Graphitic carbon nitride (g-C 3 N 4 ) possesses fascinating merits, but its practical applications are limited by the inferior properties of limited visible-light sorption, rapid recombination of photo-excited charge carriers and low electrical conductivity. Introduction of N-defects is an efficient approach to tune its optical properties, but strategies capable of creating abundant vacancies and simultaneously maintaining the highly crystalline architecture are still limited and highly desired. In this work, a facile construction methodology was demonstrated to afford g-C 3 N 4 with abundant N vacancies, high crystallinity, a hydrophilic surface structure, a small particle size, and an increased surface area under neat and mild conditions. Furthermore, the essence of our approach lies in the treatment of the bulk g-C 3 N 4 precursor with an alkaline salt (LiN(SiMe 3 ) 2 ) with a low melting point, moderate nucleophilicity, and easy removal procedures. The unique structural properties of the afforded ND-g-C 3 N 4 allow for a significantly redshifted absorption edge and enhanced charge carrier separation, leading to superior photocatalytic hydrogen evolution performance three times that obtained by pristine g-C 3 N 4 . The modification strategy developed herein sheds light on the fabrication of g-C 3 N 4 -based materials with improved photocatalytic efficiency via efficient introduction of N defects, variation of the surface structure, and retention of the high crystallinity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Mechanochemistry-driven phase transformation of crystalline covalent triazine frameworks assisted by alkaline molten salts

We report covalent triazine frameworks (CTFs) have shown wide applications in the fields of separation, catalysis, energy storage, and beyond. However, it is a long-term challenging subject to fabricate high-quality CTF materials via facile procedures. Herein, a mechanochemistry-driven procedure was developed to achieve phase transformation of crystalline CTFs assisted by alkaline molten salts. The transformation of CTF-1 from staggered AB to eclipsed AA stacking mode was achieved by short time (30 min) mechanochemical treatment in the presence of molten salts composed of LiOH/KOH, generating high-quality CTF-1 material with high crystallinity, high surface area (625 m 2 g -1 ), and permanent/ordered porosity without carbonization under ambient conditions. This facile procedure could be extended to provide nanoporous three-dimensional CTF materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

UV-Vis spectrophotometric determination of rare earth elements (REE) speciation at near-neutral to alkaline pH. Part I: m-cresol purple properties from 25-75 °C and Er hydrolysis

The speciation and mobility of rare earth elements (REE) strongly depends on pH which controls the formation of charged aqueous hydroxyl species. The latter potentially play an important role in controlling heavy REE adsorption on clay minerals in near-neutral to alkaline waters such as in regolith-hosted REE mineral deposits. However, accurate REE hydrolysis constants are needed for developing geochemical models that can predict the role of these charged species in natural systems. Here, we develop a robust experimental UV-Vis spectrophotometric method using m-cresol purple to determine in situ pH from 25 to 75 °C. This method is used to derive the average ligand number and hydrolysis constants of erbium (Er) at 25 °C in aqueous solutions with low ionic strength (≤ 0.001 mol/L) at pH from ~7 to 9.5 and in the presence of Er concentrations from 0 to 0.057 mM. The average ligand number ranges between 1 and 3 indicating that Er(OH) 2+ , Er(OH) 2 + and Er(OH) 3 0 control speciation in the experiments. The logarithm of the Er hydrolysis constants (log*β n ° , n= 1 to 3) derived at infinite dilution for the reaction Er 3+ + nH 2 O = Er(OH) n 3-n + nH + are: *β 1 ° = –7.22 ± 0.10, *β 2 ° = –14.52 ± 0.08, *β 3 ° = –23.24 ± 0.04. Implementation of these experimental data into a geochemical model indicates that the Er(OH) 2 + and Er(OH) 3 0 species are both stable in a much wider pH range than previously predicted. Consequently, the positively charged REE hydroxyl complexes can potentially control the fractionation of light vs. heavy REE via adsorption as observed in the formation of certain regolith-hosted REE deposits.

58 GEOSCIENCES↗
DOE OSTI2025

UV-Vis spectrophotometric determination of rare earth elements (REE) speciation at near-neutral to alkaline pH. Part II: hydrolysis of Er from 25 to 75 °C

Aqueous speciation of rare earth elements (REE) controls their mobilization, fractionation, and enrichment in the natural waters. Geochemical modeling of their speciation is key to improve our understanding of the formation of economic mineral deposits, for developing mineral separation and mine tailing recovery technologies, and for characterizing the geochemistry of thermal water. However, our ability to predict the fate of REE in a wide pH and temperature range is limited by the scarcity of thermodynamic data for the REE hydroxyl complexes. In part I of this study (H. J. Han and A. P. Gysi, Dalton Trans., 2024, 53, 13129–13141), the optical properties of m-cresol purple (mCP) were determined using UV-Vis spectrophotometry between 25 and 75 °C in order to develop a method for deriving the hydrolysis constants of erbium (Er). Here, UV-Vis spectrophotometry experiments were conducted as a function of temperature between 35 and 75 °C to determine the hydrolysis of Er in near-neutral to alkaline solutions using mCP as an in situ pH color indicator. Here, the experiments were conducted with Er concentrations from 0 to ~0.253 mmol kg –1 in low ionic strength solutions (≤0.001 mol kg –1 ).

58 GEOSCIENCES↗
DOE OSTI2025

Insights into catalyst degradation during alkaline water electrolysis under variable operation

Energy conversion technologies that are key to decarbonization efforts face significant durability challenges due to variable operation. Understanding the impact of variable operation on catalytic stability and identifying the key variables that dictate degradation is crucial for developing robust technologies. Here, we present a comprehensive investigation of the effects of variable operation on liquid alkaline water electrolysis. Our findings reveal that variable operation induces severe degradation of Ni, Fe, and Co catalytic films that is not observed during steady-state operation. By systematically interrogating the electrode discharge during simulated shutdown tests using Raman spectroscopy and mass spectrometry techniques, we uncover significant alterations caused by reverse currents in real time. These include changes in crystal structure, composition, film thickness, electronic conductivity, and dissolution rates. Lab-scale electrolyzer experiments further highlight the impact of variable operation on catalyst materials under relevant conditions. Finally, we provide guidelines for leveraging these insights to advance electrocatalysis research. This work underscores the importance of integrating realistic stressors into stability testing and offers practical guidelines for catalyst design, performance evaluation, and industrial implementation. Collectively, insights from this study will drive the development of more resilient energy conversion technologies.

Marquez, Raul A. [Univ. of Texas, Austin, TX (Unit↗
DOE OSTI2020

Enthalpy and entropy of oxygen electroadsorption on RuO 2 (110) in alkaline media

We report the temperature influence of the OHad and Oad electroadsorption on RuO 2 (110) films grown on TiO 2 (110) crystals in alkaline media. From the temperature effect, we evaluate the enthalpy and entropy of the OH ad and O ad electroadsorption, including the adsorbate–adsorbate interactions that we analyze using the interaction parameters of the Frumkin-isotherm model. We found that the adsorbates repel each other enthalpically but attract each other entropically. Our result suggests that an entropy analysis is necessary to capture the electroadsorption behavior on RuO 2 since the enthalpy–entropy competition strongly influences the electroadsorption behavior. Our observation of an entropic force is consistent with the view that water may be a mediator for adsorbate–adsorbate interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

The many-body expansion for metals. I. The alkaline earth metals Be, Mg, and Ca

We examine the many-body expansion (MBE) for alkaline earth metal clusters, Be n , Mg n , Ca n ( n = 4, 5, 6), at the Møller–Plesset second order perturbation theory, coupled-cluster singles and doubles with perturbative triples, multi-reference perturbation theory, and multi-reference configuration interaction levels of theory. The magnitude of each term in the MBE is evaluated for several geometrical configurations. We find that the behavior of the MBE for these clusters depends strongly on the geometrical arrangement and, to a lesser extent, on the level of theory used. Another factor that affects the MBE is the in situ (ground or excited) electronic state of the individual atoms in the cluster. For most geometries, the three-body term is the largest, followed by a steady decrease in absolute energy for subsequent terms. Though these systems exhibit non-negligible multi-reference effects, there was little qualitative difference in the MBE when employing single vs multi-reference methods. Useful insights into the connectivity and stability of these clusters have been drawn from the respective potential energy surfaces and quasi-atomic orbitals for the various dimers, trimers, and tetramers. Through these analyses, we investigate the similarities and differences in the binding energies of different-sized clusters for these metals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Attosecond time delays at Cooper minima in valence-shell photoionization of alkali-metal and alkaline-earth-metal atoms

Ji et al. [New J. Phys. 26, 093014 (2024)] established a direct link between the photoionization cross section and the attosecond time delay near Cooper minima (CM) in the valence shells of noble-gas atoms. This link is based on the analytic properties of the ionization amplitude in the complex plane of the photoelectron energy, and is particularly sensitive to the winding number of the amplitude around the origin of the complex energy plane. Here, in this study, we demonstrate an analogous relation for photoionization of the valence 𝑛⁢𝑠 shells of alkali-metal atoms (AMA), from Na (𝑛 = 3) to Cs (𝑛 = 6), as well as alkaline-earth-metal atoms (AEMA), from Mg (𝑛 = 3) to Ba (𝑛 = 6). To this end, we employ a fully relativistic formalism that separates the two complementary 𝑛⁢𝑠 1/2 → 𝐸⁢𝑝 1/2 and 𝐸⁢𝑝 3/2 ionization channels. Each of these channels exhibits a phase variation close to 𝜋, but in opposite directions, near their respective Cooper minima. This phase variation vanishes in a nonrelativistic formulation, where the two channels become degenerate. For AMA, due to the threshold proximity of the CM, the universal Coulomb contribution to the time delay must be subtracted. The remaining component of the time delay is target-specific, angular-dependent, and accessible through comparative measurements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Bismuth Enables the Formation of Disordered Birnessite in Rechargeable Alkaline Batteries

Recent advances in rechargeable Zn/MnO$_2$ alkaline batteries have shown promise for scalable energy storage systems which provide a safe, low-cost alternative with a demonstrated lifetime over thousands of cycles. This cathode technology is based on a 2-electron Mn redox process where a layered birnessite-type phase has been shown to form after the first cycle with excellent reversibility between the discharge product, Mn(OH)$_2$. Herein, we investigate the reversible reaction between birnessite and Mn(OH)$_2$ with and without a Bi$_2$O$_3$ additive using multimodal structural characterization techniques during active battery cycling. Diffraction results provide evidence of Bi$^{3+}$ residing in the interlayer of birnessite which prevents irreversible Mn$_3$O$_4$ formation by limiting Mn$^{3+}$ diffusion within the crystal lattice. Also, upon charge no MnOOH intermediate phases are observed. Instead, X-ray absorption and Raman spectroscopy indicate a disordered, non-crystalline birnessite-type phase consisting of mostly neutral H$_2$O within the interlayer. Birnessite phases will reform without Bi$_2$O$_3$ present, but Mn$_3$O$_4$ formation severely polarizes the potential they are formed at, leading to capacity fade. Also, we discuss the reversible Bi$_2$O$_3$ conversion to Bi$^0$ and its contribution to the observed capacity. We expect the results will provide crucial insight into the development of aqueous, rechargeable battery systems utilizing MnO 2 .

25 ENERGY STORAGE↗
DOE OSTI2021

Reducing Zinc Redistribution and Extending Cycle Life Via Electrochemical Synthesis of Zinc/Zinc Oxide Anodes in Rechargeable Alkaline Batteries

Redistribution of zinc over the electrode surface, also known as shape change, is a major problem and a cause of failure in alkaline zinc anode batteries. To mitigate this phenomenon, we propose a scalable approach based on an in situ formed, highly porous electrochemically synthesized ZnO matrix with uniformly electrodeposited zinc particles. This results in ∼70% improvement in cycle life performance at a rate of 10 mA cm −2 compared to control Zn anodes, which have not gone through the formation process. A quantitative electrolyte analysis revealed under-saturated zincate ion concentration in the electrochemically synthesized ZnO/Zn cells indicating reduced zincate movement. Post mortem analysis of the anodes indicated higher retention of both Zn and ZnO on the electrochemically synthesized ZnO anodes signifying reduced redistribution of active material. Image analysis of the cycled anodes revealed a narrower Zn particle size distribution (62−79 μ m) in contrast to a wider particle size distribution of 51–96 μ m observed in the control anodes. The formation approach results in electrochemically synthesized ZnO/Zn anodes providing a stable ZnO matrix in which Zn particles retain their localized distribution on cycling better than control electrodes conventionally made by pasting zinc particles together with a binder.

Kolhekar, Snehal (ORCID:0000000210321153)↗
DOE OSTI2022

Self-Adhesive Ionomers for Alkaline Electrolysis: Optimized Hydrogen Evolution Electrode

Hydrogen produced through low-temperature water electrolysis using anion exchange membranes (AEM) combines the benefits of liquid-electrolyte alkaline electrolysis and solid-polymer proton exchange membrane electrolysis. The anion conductive ionomers in the oxygen-producing anode and hydrogen-producing cathode are a critical part of the three-dimensional electrodes. The ionomer in the hydrogen-producing cathode facilitates hydroxide ion conduction from the cathode catalyst to the anode catalyst, and water transport from the anode to the cathode catalyst through the AEM. This ionomer also binds the catalyst particles to the porous transport layer. Here in this study, the cathode durability was improved by use of a self-adhesive cathode ionomer to chemically bond the cathode catalyst particles to the porous transport layer. It was found that the cathode ionomers with high ion exchange capacity (IEC) were more effective than low IEC ionomers because of the need to transport water to the cathode catalyst and transport hydroxide away from the cathode. The cathode durability was improved by using ionomers which were soluble in the spray-coated cathode ink. Optimization of the catalyst and ionomer content within the cathode led to electrolysis cells which were both mechanically durable and operated at low voltage.

08 HYDROGEN↗
DOE OSTI2024

The Dominant Effect of Electrolyte Concentration on Rechargeability of γ -MnO 2 Cathodes in Alkaline Batteries

Achieving high cycle life rechargeableγ-MnO 2 cathodes in alkaline batteries face many challenges. Chief among these is the inability of theγ-MnO 2 polymorph to retain its structural integrity when cycled to high utilization of its theoretical capacity ∼300 mAh g −1 . In this paper, we investigate the root cause of failure of MnO 2 cathodes under deep cycling in the one-electron discharge range and establish a strong link between capacity fade and the amount of birnessite formed. We uncover the underlying cause of failure by cycling industrial scaleγ-MnO 2 cathodes at various levels of theoretical capacity utilization (100%, 50%, and 30%) and in different KOH concentrations (37, 25, and 10 wt%). To determine materials evolution the cycled cathodes were dissected, characterized and analyzed using SEM, XRD, FIB/SEM, EIS, and XPS. Based on our findings, we propose that one major cause of failure of MnO 2 cathodes stems from the solubility of Mn +3 formed during discharge which effectively results in destruction of theγ-MnO 2 phase and amorphization of the cathode. The results show that the bulk of theγ-MnO 2 phase is preserved only in ∼10 wt% KOH, which indicates the attractive range of KOH concentration for cycling of rechargeableγ-MnO 2 cathodes.

Electrochemistry↗
DOE OSTI2024

Modeling the Effect of Material Properties on Liquid-Alkaline Water Electrolysis

Liquid-alkaline water electrolyzers (LAWEs) use electricity to drive the conversion of water to H 2 and O 2 gas. These devices benefit from the use of low-cost nickel electrodes and metal-oxide separators, but suffer from lower current densities and higher cell voltages than proton-exchange-membrane water electrolyzers. Identifying the inefficiencies that result in this poor performance is key to mitigating losses and optimizing LAWEs. Here, we report an experimentally-validated 1-D continuum model of a LAWE that elucidates the gradients within the cell, simulates H 2 crossover, and projects the energy improvements made possible by modulating the properties of the electrodes and separator. The model captures the Nernstian polarization losses and the distribution of gas- and liquid-phases within the electrodes, enabling quantification of energy losses associated with kinetic, ohmic, and bubble-induced (mass-transport) resistances. Simulations demonstrate that LAWE can achieve energy intensities of 50 kWh kg −1 of H 2 at 1 A cm −2 using improved electrode and separator properties.

08 HYDROGEN↗
DOE OSTI2025

On the Source of Conductivity in Alkaline Zn Anodes: Zn Percolation and ZnO Bridging

Alkaline Zn anodes are fundamental to commercial Zn-MnO 2 batteries as well as emerging rechargeable designs. In these electrodes, Zn particles are both the active material and source of electronic conduction. However, there are known cases in which electronic connectivity between Zn particles or the current collecting pin is lost even though the battery continues to function. Here we use X-ray computed tomography (CT) of AA batteries to demonstrate several examples of Zn particle-to-particle connectivity breakdown, which is observed even in cases at relatively high discharge rate. This indicates maintenance of the electronic network through the less-conductive ZnO discharge product. We introduce a new equation for electronic conductivity maintained through bridges of ZnO formed between percolating Zn particles. This necessitates discarding the Bruggeman correlation and instead redefining effective electronic conductivity using percolation theory. We demonstrate that such a model for conduction enables prediction of an inverted reaction zone, which is an experimentally observed case in which significant Zn dissolution and ZnO formation occurs heavily near the current collecting pin. Current computational Zn-MnO 2 models never predict an inverted reaction zone, and thus the updated conductivity enables models to accurately explain a wider range of experimental conditions.

Guida, Dominick P. [Northeastern Univ., Boston, MA↗
DOE OSTI2025

Alkaline Zinc Passivation Mechanism is Controlled by Hydroxide Concentration

We studied Zn passivation and oxide growth in Zincate (Zn(OH) 4 2− ) in 4 and 8 M KOH solutions using an electrochemical quartz crystal microbalance (EQCM), building on our initial work at 1 M KOH where passivation was kinetically controlled. A porous passivating oxide spontaneously forms on Zn electrodes when KOH is above 4 M and saturated with zincate. However, passivation does not occur when bulk zincate concentration is decreased, resulting in continual Zn dissolution. EQCM data suggests that the passivation mechanism is strongly affected by pOH. Mass transport and kinetic processes in the 4 M KOH electrolytes couple and govern Zn passivation. At 8 M, KOH concentration shifts passivation to mass transport control. We explain this by the increased solubility of Zn(OH) 3 − with increasing pOH. The variation in the mechanism of passivation implications for how passivation is handled in Zn-alkaline batteries. The importance of controlling the mass transport increases with increased pOH, suggesting that electrode design, additives, and potential flow should be optimized. At lower pOHs, kinetics and mass transport must be balanced to manage passivation effectively. Additionally, the changing nature of the native oxide layer on the surface has implications for the evenness of deposition and dissolution on the Zn electrode.

Wittman, Reed M. [Oak Ridge National Laboratory (O↗