Search NASA⌕ Search

SEARCH · Search NASA

Results for “arches”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Retractable Sun Shade

Window-shade type spring roller contains blanket, taken up by rotating cylindrical frame and held by frame over area to be shaded. Blanket made of tough, opaque polyimide material. Readily unfurled by mechanism to protect space it encloses from Sun. Blanket forms arched canopy over space and allows full access to it from below. When shading not needed, retracted mechanism stores blanket compactly. Developed for protecting sensitive Space Shuttle payloads from direct sunlight while cargo-bay doors open. Adapted to shading of greenhouses, swimming pools, and boats.

Frank, A.↗
NASA NTRS1986

Observational and numerical studies of the low-level jet stream in the atmosphere

Two cases of low-level jet (LLJ) support the hypothesis that the LLJ is an integral part of synoptic-scale cyclogenesis. The appearance of an arch with a row of cumulonimbus is discovered at the front of the LLJ. The inertia oscillations in the LLJ are pointed out as part of the quasi-diurnal variation. A plan for further research by numerical modelling is proposed, which will bring more clarification of the mechanics of the LLJ.

Djuric, D.↗
NASA NTRS1986

Hard ACTS to follow

The Advanced Communications Technology Satellite (ACTS), the third phase of NASA's 30/20 GHz satellite communications program, is praised for its frugal usage of both the geosynchronous orbital arch and the frequency spectrum resources necessary for communications satellites. Its objective is to verify Ka-band satellite communications concepts and to develop a flight and ground system for validation of the multibeam communications proof-of-concept technologies. The ACTS ground segment (comprised of four types of terminals) is designed to compliment the spacecraft for the SS launch in 1989. Precise coordination between the ground and spacecraft segments is performed by the baseband processor (BBP), which is an in-orbit switchboard, and the tracking error word, which enables the ground terminals to remain synchronized with onboard timing. Fixed spot beams and scan beams, comprising the two types of spot beams used, both operate at the same frequency and hence, conserve frequency resources. In addition, the time division multiple access serves to enhance system efficiency. It is concluded that Ka-band satellites are a practical approach to the better usage of those resources potentially threatened by communications satellites. Comprehensive graphs and block diagrams of the system are included.

Moy, L.↗
NASA NTRS1986

A study of hard X-ray associated meter-decameter bursts observed on December 19, 1979

The results of a study of the relationship of a complex meter-decameter wavelength radio burst observed with the Clark Lake E-W and N-S interferometers, with a hard X-ray burst observed with the X-ray spectrometer aboard ISEE-3 are presented. The radio burst consisted of several type III's, reverse drift type III's, a U burst, and type II and type IV bursts. The X-ray emission was also complex. The radio as well as hard X-ray emissions were observed before the flash phase of the flare; they were not always associated and it is conjectured that this may constitute evidence for acceleration of electrons high in the corona. On the other hand, all components of the reverse drift burst were associated with hard X-ray subpeaks, indicating multiple injection of electron beams along field lines with different density gradients. While the type II burst appeared to be related to the hard X-ray burst, a detailed correspondence between individual features of the radio and hard X-ray burst emissions could not be found. The type IV burst started after all hard X-ray emissions ceased. Its source appeared to be a magnetic arch, presumably containing energetic electrons reponsible for the gyrosynchrotron radiation of type IV.

Kundu, M. R.↗
NASA NTRS1986

The upper atmosphere of Venus: A tentative explanation of its rotation

The upper atmosphere of Venus seems to revolve every 4 days, while the planet rotates in 243 days. Mariner 10 UV data on the changing positions of dark spots in the upper Venusian clouds have supported estimations of speeds ranging from 120-240 m/s. High rates of acceleration and deceleration occur on the night side, the former between -110 to -90 deg and the latter continuing to -50 deg. Arch and Y formations have been seen repeatedly between -110 to -70 deg. The highest are seen at about -90 deg and the lowest at about -30 deg. The temperature of the cloud layer at 60 km altitude is about 20 C, the pressure is nearly one earth atmosphere, and complex molecules, including O, C, H, N and S and combinations of these are present in abundance.

Boyer, C.↗
NASA NTRS1986

Stress on the surface of Venus: Analysis of data provided by Venera-15 and Venera-16

There are no large-scale sedimentation and erosion processes on Venus, therefore the observed deformation must be formed on the surface or close to it, and in the ellipsoids of stresses one of the main axes must be perpendicular to the surface. According to the deformation visible on photography from Venera-15, 16, the orientations of the ellipsoids of stresses are established in the different sections of the Montes Maxwell and the northern parquet. A geological model is established, according to which the Montes Maxwell is an arched vault and the region to the south a conjugate bend, separated by a shift zone.

Ronka, L. B.↗
NASA NTRS1986

TIMS data applications in Nebraska

A total of 172 flight-line miles of Thermal Infrared Multispectral Scanner (TIMS) data were acquired in the state of Nebraska; and an additional mission is planned for August of this year. Data collected by the scanner were generally applied to investigations in four general areas: hydrology, geology, soils, and vegetation analysis. Relatively simple manipulations of these thermal-emittance data led to excellent classifications of vegetation communities established along topographic gradients in the Nebraska Sandhills. Similar procedures were used to study variations in soil parameters along those same routes. Proposed geologic applications include mapping of the surficial geology along a portion of the Platte River and the delineation of a segment of the Cambridge Arch, a structural feature in central Nebraska.

Queen, Lloyd↗
NASA NTRS1986

Electron-cyclotron maser and solar microwave millisecond spike emission

An intense solar microwave millisecond spike emission (SMMSE) event was observed on May 16, 1981 by Zhao and Jin at Beijing Observatory. The peak flux density of the spikes is high to 5 x 100,000 s.f.u. and the corresponding brightness temperature (BT) reaches approx. 10 to the 15th K. In order to explain the observed properties of SMMSE, it is proposed that a beam of electrons with energy of tens KeV injected from the acceleration region downwards into an emerging magnetic arch forms so-called hollow beam distribution and causes electron-cyclotron maser (ECM) instability. The growth rate of second harmonic X-mode is calculated and its change with time is deduced. It is shown that the saturation time of ECM is t sub s approx. equals 0.42 ms and only at last short stage (delta t less than 0.2 t sub s) the growth rate decreases to zero rather rapidly. So a SMMSE with very high BT will be produced if the ratio of number density of nonthermal electrons to that of background electrons, n sub s/n sub e, is larger than 4 x .00001.

Li, Hong-Wei↗
NASA NTRS1987

Studies of vesicle distribution patterns in Hawaiian lavas

Basaltic lava flows are generally vesicular, and the broader facts relating to vesicle distribution have long been established; few studies have yet been made with a view to determining how and when vesicles form in the cooling history of the lava, explaining vesicle shape and size distribution, and gaining enough understanding to employ vesicles as a geological tool. Various avenues of approach exist by which one may seek to gain a better understanding of these ubiquitous structures and make a start towards developing a general theory, and three such avenues have recently been explored. One avenue involves the study of pipe vesicles; these are a well known feature of lava flows and are narrow pipes which occur near the base of many pahoehoe flow units. Another avenue of approach is that presented by the distinctive spongy pahoehoe facies of lava that is common in distal locations on Hawaiian volcanoes. A third avenue of approach is that of the study of gas blisters in lava. Gas blisters are voids, which can be as much as tens of meters wide, where the lava split along a vesicle-rich layer and the roof up-arched by gas pressure. These three avenues are briefly discussed.

Walker, George P. L.↗
NASA NTRS1987

Ice-covered water volcanism on Ganymede

Eruption of liquid H2O magmas along extensional fractures and graben-bounding normal faults may have played a critical role in the development of Ganymede's grooved terrain. The resurfacing potential of a water magma is dependent on a variety of factors, including the areal extent of the source region, the rate of discharge, the thickness of the flow, and the time that it takes the flow to completely freeze to its base. In this paper the thermal evolution of such a flow is considered in detail. The minimum unfrozen lifetime of a 5-m flow is approximately 12.5 days while a 10-m flow would survive for at least 50 days. Heating resulting from frictional head loss could reasonably extend these lifetimes by 50 percent or more. With a discharge rate of the order of 1-10 cu km/d, an individual volcanic water flow could flood an area of about 10,000 sq km before freezing. As the flow solidifies, its volume will increase, thus lifting and arching its protective ice cover. Extensional fractures may then develop in the ice subparallel to the graben walls. These fractures could result in grooves directly, given a sufficiently thick (1 km) flow, or they may simply act to concentrate various tectonic forces that could initiate groove-producing faults.

Allison, M. Lee↗
NASA NTRS1987

Some models of the Geminids meteor stream formation

Further development of methods of investigations of meteor shower structure and a great deal of observational data have made it possible to obtain a precise flux density profile along the Earth's orbit for the Geminids meteor shower. This curve proved to be adequately described by a exponential law. Examined are: (1) which ejection model will fit the observed shower structure; and (2) to what extent the subsequent process of evolution modifies the formed structure. The following conclusions are drawn: (1) When studying the mechanism of formation of meteor streams, it is necessary to take into consideration the velocity distribution of particles that have been ejected from the parent body; (2) On the basis of the observed density variations, it is possible to determine what kind of ejection takes place (a single ejection or that around an orbital arch); and (3) The original structure of the Geminids cross section persists for no more than 1,500 to 2,000 years.

Belkovich, O. I.↗
NASA NTRS1988

Non-isothermal elastoviscoplastic analysis of planar curved beams

The development of a general mathematical model and solution methodologies, to examine the behavior of thin structural elements such as beams, rings, and arches, subjected to large nonisothermal elastoviscoplastic deformations is presented. Thus, geometric as well as material type nonlinearities of higher order are present in the analysis. For this purpose a complete true abinito rate theory of kinematics and kinetics for thin bodies, without any restriction on the magnitude of the transformation is presented. A previously formulated elasto-thermo-viscoplastic material constitutive law is employed in the analysis. The methodology is demonstrated through three different straight and curved beams problems.

Simitses, G. J.↗
NASA NTRS1987

Space ten-meter telescope (STMT) - Structural and thermal feasibility study of the primary mirror

The structural and thermal behavior of a ten-meter primary mirror for a space optical/near-IR telescope in geosynchronous orbit is studied. The glass-type lightweighted mirror is monolithic, of the double arch type, and is supported at only three points. The computer programs SSPTA (thermal), NASTRAN (finite element), and ACCOS V (optical) are used in sequence to determine the temperature, deformation, and optical performance of the mirror. A mirror temperature of 130 K or less appears to be obtainable by purely passive means. With a fused silica or standard Zerodur blank, thermally-induced deformation is unacceptable and cannot be fully corrected by an active secondary mirror over the desired field. Either active thermal control or a blank of lower thermal expansion coefficient would be required.

Bely, Pierre Y.↗
NASA NTRS1988

Hierarchic plate and shell models based on p-extension

This paper is concerned with formulations of finite element models for beams, arches, plates and shells based on the principle of virtual work. The focus is on computer implementation of hierarchic sequences of finite element models suitable for numerical solution of a large variety of practical problems which may concurrently contain thin and thick plates and shells, stiffeners, and regions where three dimensional representation is required. The approximate solutions corresponding to the hierarchic sequence of models converge to the exact solution of the fully three dimensional model. The stopping criterion is based on (1) estimation of the relative error in energy norm; (2) equilibrium tests; and (3) observation of the convergence of quantities of interest.

Szabo, Barna A.↗
NASA NTRS1988

Wrinkle ridge assemblages on the terrestrial planets

The morphological and dimensional similarities of the structures within the wrinkle ridge assemblages observed on terrestrial planets are investigated, including structures that occur in mare basalts on the moon and in smooth plains on Mars and Mercury. These structures can be classified as either arches or ridges on the basis of morphology, and ridges can be subdivided onto first-, second-, and third-order ridges on the basis of dimensions. Using ridge structures on the Columbia Plateau (U.S.) as analogs, a basis for a structural interpretation of the wrinkle ridge assemblages on the terrestrial planets is established. It is shown that the anticlinal ridges of the Columbia Plateau are appropriate analogs to the first-order ridges, supporting tectonic interpretations for the ridges.

Watters, Thomas R.↗
NASA NTRS1988

Hierarchic plate and shell models based on p-extension

Formulations of finite element models for beams, arches, plates and shells based on the principle of virtual work was studied. The focus is on computer implementation of hierarchic sequences of finite element models suitable for numerical solution of a large variety of practical problems which may concurrently contain thin and thick plates and shells, stiffeners, and regions where three dimensional representation is required. The approximate solutions corresponding to the hierarchic sequence of models converge to the exact solution of the fully three dimensional model. The stopping criterion is based on: (1) estimation of the relative error in energy norm; (2) equilibrium tests, and (3) observation of the convergence of quantities of interest.

Szabo, Barna A.↗
NASA NTRS1988

Biostratigraphic case studies of six major extinctions

Biostratigraphic case studies of six major extinctions show all are gradual save one, which is a catastrophic extinction of terrestrial origin. These extinctions show a continuum of environmental insults from major to minor. The major causes of these extinctions are positive and negative eustatic sea level changes, temperature, or ecological competition. Extraterrestrial causes should not be posited without positive association with a stratigraphically sharp extinction. The Cretaceous-Tertiary terrestrial extinction is considerably smaller in percentage of extinction than the marine extinction and is spread over 10 my of the Cretaceous and 1 my of the Tertiary. Sixty percent of the 30 dinosaurs in the northern Great Plains of the U.S. and Canada had become extinct in the 9 my before the late Maastrichtian sea level drop. The best data on the Permo-Triassic terrestrial extinction are from the Karoo basin of South Africa. This is a series of 6 extinctions in some 8 my, recorded in some 2800 meters of sediment. Precision of dating is enhanced by the high rate of accumulation of these sediments. Few data are readily available on the timing of the marine Permo-Triassic extinction, due to the very restricted number of sequences of Tatarian marine rocks. The terminal Ordovician extinction at 438 my is relatively rapid, taking place over about 0.5 my. The most significant aspect of this extinction is a eustatic sea level lowering associated with a major episode of glaciation. New data on this extinction is the reduction from 61 genera of trilobites in North America to 14, for a 77 percent extinction. Another Ordovician extinction present over 10 percent of the North American craton occurs at 454 my in the form of a catastrophic extinction due to a volcanic eruption which blanketed the U.S. east of the Transcontinental Arch. This is the only other sizeable extinction in the Ordovician.

Sloan, R. E.↗
NASA NTRS1988

Siphon flows in isolated magnetic flux tubes

The paper considers steady siphon flows in isolated thin magnetic flux tubes surrounded by field-free gas, with plasma beta greater than or equal to 1, appropriate for conditions in the solar photosphere. The cross-sectional area of the flux tube varies along the tube in response to pressure changes induced by the siphon flow. Consideration is also given to steady isothermal siphon flows in arched magnetic flux tubes in a stratified atmosphere. Applications of the results to intense magnetic flux tubes in the solar photosphere and to the photospheric Evershed flow in a sunspot penumbra are addressed.

Thomas, John H.↗