SEARCH · Search NASA

Results for “backscatter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

All sources NASA NTRS DOE OSTI

NASA NTRS1986

Temperature retrievals by Rayleigh backscatter lidar signals

Differences between retrieved temperatures from lidar and atmospheric model temperatures are calculated for four problems: (1) the effect of a transient thin aerosol layer at any altitude on temperature retrieved by a single-wavelength lidar; (2) the effect of residual aerosols on temperature retrieved by a two-wavelength lidar; (3) the errors due to splicing two backscatter signals which are obtained separately; and (4) the effect of multiple scattering. The results show that temperatures can be retrieved for + or - 3 K if Rayleigh backscatter can be measured for + or - 1.5 percent. The LITE lidar in a 240 km orbit aboard the Shuttle should be able to make a + or -3 K measurements from 10-40 km with vertical resolutions of 1 km and horizontal resolutions of 300 km.

Uchino, O.↗

NASA NTRS1987

Evaluation and comparison of dominant backscattering sources at 10 GHz in two treatments of tall-grass prairie

A very-fine-range resolution Frequency Modulated-Continuous Wave radar, operating at X-band, was used to evaluate the primary backscattering contributors to the radar signal from a tall-grass prairie. Defoliation was used to help measure relative backscatter from various components of the canopy with both linear polarizations and at 30 deg and 50 deg incidence angles. Variation of the average returned power with incidence angle was greatest for the natural prairie at horizontal polarization and was the least for vertical polarization. Vertical polarization seemed to be more sensitive to the upper portions of the plants, whereas horizontal polarization was to the lower portions. Attenuation for horizontal polarization was only half that for vertical polarization. Dielectric measurements of the grass and some of the canopy components were conducted as well.

Zoughi, Reza↗

NASA NTRS1987

Backscattering properties of simulated geological surfaces

A simple, compact, indoor measurement system has been developed to study the radar backscattering properties of a variety of simulated geological surfaces and volumes. The media include a homogeneous layer of fine sand observed for various levels of surface roughness, a sand layer covered with a layer of rocks, and a layer of rocks sandwiched between layers of sand. Four different sizes of rocks were investigated varying from about 1 cm in size to 6 cm in size. The results provide information on the penetration depth of sand, the relative importance of the coherent and incoherent backscattering components, and the magnitude of volume scattering by a layer of rocks relative to surface scattering by a random surface.

East, J.↗

NASA NTRS1987

Evaluating roughness models of radar backscatter

Three radar backscatter roughness models were assessed using soil moisture data collected by the Space Shuttle flight 41G SIR-B SAR in an intensively farmed area. The SIR-B data swath included a large number of bare, dry fields with a large variety of surface roughnesses. The small perturbation model gives the best results, particularly when fields with a definite periodic row structure were omitted. The standard deviation of surface heights appears to be a good measure of relative roughness conditions, but the correlation length is not a good descriptor of the surface, and does not seem to be related in any way to the measured backscatter.

Engman, Edwin T.↗

NASA NTRS1987

The effects of soil moisture, surface roughness, and vegetation on L-band emission and backscatter

Measurements performed with SIR-B at 1.28 GHz and an airborne multiple-beam push-broom radiometer at 1.4 GHz over agricultural fields near Fresno, California are examined. A theoretical model (Kirchhoff approximation) was used to assess the effects of surface roughness and vegetation (alfalfa and lettuce) with respect to the responses of microwave emission and backscatter to soil-moisture variations. It is found that the surface roughness plays a dominant role compared to the vegetation cover in the microwave backscatter.

Wang, James R.↗

NASA NTRS1987

Measuring and modeling the backscattering cross section of a leaf

Leaves are a significant feature of any vegetation canopy, and for remote sensing purposes it is important to develop an effective model for predicting the scattering from a leaf. From measurements of the X band backscattering cross section of a coleus leaf in varying stages of dryness, it is shown that a uniform resistive sheet constitutes such a model for a planar leaf. The scattering is determined by the (complex) resistivity which is, in turn, entirely specified by the gravimetric moisture content of the leaf. Using an available asymptotic expression for the scattering from a rectangular resistive plate which includes, as a special case, a metallic plate whose resistivity is zero, the computed backscattering cross sections for both principal polarizations are found to be in excellent agreement with data measured for rectangular sections of leaves with different moisture contents. If the resistivity is sufficiently large, the asymptotic expressions do not differ significantly from the physical optics ones, and for naturally shaped leaves as well as rectangular sections, the physical optics approximation in conjunction with the resistive sheet model faithfully reproduces the dominant feataures of the scattering patterns under all moisture conditions.

Senior, T. B. A.↗

NASA NTRS1987

Dihedral corner reflector backscatter using higher order reflections and diffractions

The uniform theory of diffraction (UTD) plus an imposed edge diffraction extension is used to predict the backscatter cross sections of dihedral corner reflectors which have right, obtuse, and acute included angles. The UTD allows individual backscattering mechanisms of the dihedral corner reflectors to be identified and provides good agreement with experimental cross-section measurements in the azimuthal plane. Multiply reflected and diffracted fields of up to third-order are included in the analysis for both horizontal and vertical polarizations. The coefficients of the uniform theory of diffraction revert to those of the geometrical theory of diffraction (GTD) in far-field cross-section analyses, but finite cross sections can be obtained everywhere by considering mutual cancellation of diffractions from parallel edges. Analytic calculations are performed using UTD coefficients; hence the accuracy required in angular measurements is more critical as the distance increases. The common far-field approximation that all rays to the observation point are parallel is too gross an approxiation for the angular parameters in the UTD coefficients in the far field.

Griesser, Timothy↗

NASA NTRS1988

Effect of curvature on the backscattering from leaves

Using a model previously developed for the backscattering cross section of a planar leaf at X-band frequencies and above, the effect of leaf curvature is examined. For normal incidence on a rectangular section of a leaf curved in one and two dimensions, an integral expression for the backscattered field is evaluated numerically and by a stationary phase approximation, leading to a simple analytical expression for the cross section reduction produced by the curvature. Numerical results based on the two methods are virtually identical, and in excellent agreement with measured data for rectangular sections of coleus leaves applied to the surfaces of styrofoam cylinders and spheres of different radii.

Sarabandi, K.↗

NASA NTRS1988

Backscatter laser depolarization studies of simulated stratospheric aerosols: Crystallized sulfuric acid droplets

The optical depolarizing properties of simulated stratospheric aerosols were studied in laboratory laser (0.633 micrometer) backscattering experiments for application to polarization lidar observations. Clouds composed of sulfuric acid solution droplets, some treated with ammonia gas, were observed during evaporation. The results indicate that the formation of minute ammonium sulfate particles from the evaporation of acid droplets produces linear depolarization ratios of beta equivalent to 0.02, but beta equivalent to 0.10 to 0.15 are generated from aged acid cloud aerosols and acid droplet crystallization effects following the introduction of ammonia gas into the chamber. It is concluded that partially crystallized sulfuric acid droplets are a likely candidate for explaining the lidar beta equivalent to 0.10 values that have been observed in the lower stratosphere in the absence of the relatively strong backscattering from homogeneous sulfuric acid droplet (beta equivalent to 0) or ice crystal (beta equivalent to 0.5) clouds.

Sassen, Kenneth↗

NASA NTRS1988

Radar backscatter of sea ice during winter

Active microwave measurements were made during the 1987 Marginal Ice Zone Experiment. Backscatter data were acquired at frequencies from 1.25 to 35 GHz, at incidence angles from 0 to 80 deg, and with linear antenna polarizations. The objective was to describe the scattering coefficients of the major ice types in the region and to study the winter conditions and their influence on the microwave response. Results show that multiyear and pancake ice produce strong backscatter, while returns from open water between floes and new ice are weak. First-year ice has a wide range of returns; when the surface is smooth returns are weak, and if roughened, i.e., like pancake ice, the returns increase substantially.

Onstott, R. G.↗

NASA NTRS1989

Probabilities and statistics for backscatter estimates obtained by a scatterometer with applications to new scatterometer design data

The values of the Normalized Radar Backscattering Cross Section (NRCS), sigma (o), obtained by a scatterometer are random variables whose variance is a known function of the expected value. The probability density function can be obtained from the normal distribution. Models for the expected value obtain it as a function of the properties of the waves on the ocean and the winds that generated the waves. Point estimates of the expected value were found from various statistics given the parameters that define the probability density function for each value. Random intervals were derived with a preassigned probability of containing that value. A statistical test to determine whether or not successive values of sigma (o) are truly independent was derived. The maximum likelihood estimates for wind speed and direction were found, given a model for backscatter as a function of the properties of the waves on the ocean. These estimates are biased as a result of the terms in the equation that involve natural logarithms, and calculations of the point estimates of the maximum likelihood values are used to show that the contributions of the logarithmic terms are negligible and that the terms can be omitted.

Pierson, Willard J., Jr.↗

NASA NTRS1988

Effect of curvature on the backscattering from a leaf

Using a model previously developed for the backscattering cross section of a planar leaf at X-band frequencies and above, the effect of leaf curvature is examined. For normal incidence on a rectangular section of a leaf curved in one and two dimensions, an integral expression for the backscattered field is evaluated numerically and by a stationary phase approximation, leading to a simple analytical expression for the cross-section reduction produced by the curvature. Numerical results based on the two methods are virtually identical, and in excellent agreement with measured data for rectangular sections of coleus leaves applied to the surfaces of styrofoam cylinders and spheres of different radii.

Sarabandi, K.↗

NASA NTRS1987

Mauna Loa Aerosol Backscatter Intecomparison Experiment (MABIE)

Measurements of CO2 aerosol backscatter coefficients and other aerosol physicochemical properties were obtained in remote Pacific free tropospheric airmasses at the Mauna Loa Observatory in Hawaii. The experiment used an attenuated total reflection impactor (Johnson et al., 1983), a dispersive infrared spectrophotometer, and a high-resolution optical particle counter. Preliminary results suggest that sulfate compounds dominate background backscatter properties at CO2 wavelengths between 9 and 10 microns.

Bowdle, David A.↗

NASA NTRS1988

Coherent HF radar backscatter from small-scale irregularities in the dusk sector of the subauroral ionosphere

This paper describes the characteristics of backscatter from decameter-scale ionospheric plasma density irregualarities, observed with an impressive regularity by the Goose Bay (Labrador) high-frequency (HF) radar in the dusk sector of the winter ionosphere, and discusses the relation of the scatter to the midlatitude trough. It is shown that this dusk scatter can be readily distinguished from other types of late afternoon/early evening scatter by the extreme equatorward position of its source region and by the low values of its associated radar Doppler velocities (not above 200 m/s) and spectral widths (not more than 200 m/s). A comparison of the radar observations with nearly simultaneous particle precipitation data obtained with the DMSP F6 satellite demonstrated that the source region of the backscatter lies within the subauroral ionosphere. It is shown that the characteristics of dusk scatter are compatible with the Spiro et al. (1978) model of the electrodynamics of the midlatitude trough.

Ruohoniemi, J. M.↗

NASA NTRS1989

Tropospheric aerosol backscatter background mode at CO2 wavelengths

A comparison is made between three climatologies of backscatter measurements in the troposphere and lower stratosphere at CO2 wavelengths. These were obtained from several locations using ground-based and airborne lidar systems. All three measurement sets show similar features, specifically, a high frequency of occurrence of low backscatter over a limited range of values in the middle and upper atmosphere (the 'background mode'). This background mode is important for the design and performance simulation of the prospective satellite sensors that rely on atmospheric aerosols as scattering targets.

Rothermel, Jeffry↗

NASA NTRS1989

Backscatter laser depolarization studies of simulated stratospheric aerosols - Crystallized sulfuric acid droplets

The optical depolarizing properties of simulated stratospheric aerosols were studied in laboratory laser (0.633 micrometer) backscattering experiments for application to polarization lidar observations. Clouds composed of sulfuric acid solution droplets, some treated with ammonia gas, were observed during evaporation. The results indicate that the formation of minute ammonium sulfate particles from the evaporation of acid droplets produces linear depolarization ratios of beta equivalent to 0.02, but beta equivalent to 0.10 to 0.15 are generated from aged acid cloud aerosols and acid droplet crystalization effects following the introduction of ammonia gas into the chamber. It is concluded that partially crystallized sulfuric acid droplets are a likely candidate for explaining the lidar beta equivalent to 0.10 values that have been observed in the lower stratosphere in the absence of the relatively strong backscattering from homogeneous sulfuric acid droplet (beta equivalent to 0) or ice crystal (beta equivalent to 0.5) clouds.

Sassen, Kenneth↗

NASA NTRS1990

Nimbus 7 solar backscatter ultraviolet (SBUV) ozone products user's guide

Three ozone tape products from the Solar Backscatter Ultraviolet (SBUV) experiment aboard Nimbus 7 were archived at the National Space Science Data Center. The experiment measures the fraction of incoming radiation backscattered by the Earth's atmosphere at 12 wavelengths. In-flight measurements were used to monitor changes in the instrument sensitivity. Total column ozone is derived by comparing the measurements with calculations of what would be measured for different total ozone amounts. The altitude distribution is retrieved using an optimum statistical technique for the inversion. The estimated initial error in the absolute scale for total ozone is 2 percent, with a 3 percent drift over 8 years. The profile error depends on latitude and height, smallest at 3 to 10 mbar; the drift increases with increasing altitude. Three tape products are described. The High Density SBUV (HDSBUV) tape contains the final derived products - the total ozone and the vertical ozone profile - as well as much detailed diagnostic information generated during the retrieval process. The Compressed Ozone (CPOZ) tape contains only that subset of HDSBUV information, including total ozone and ozone profiles, considered most useful for scientific studies. The Zonal Means Tape (ZMT) contains daily, weekly, monthly and quarterly averages of the derived quantities over 10 deg latitude zones.

Fleig, Albert J.↗

NASA NTRS1990

Optical backscatter characteristics of Arctic polar stratospheric clouds

Airborne lidar measurements have been made of polar stratospheric clouds (PSCs) during the Airborne Arctic Stratospheric Expedition in January-February 1989. These show the existence of a systematic relationship between the backscatter depolarization ratio and the (aerosol + molecular)/molecular backscatter ratio. The data are consistent with a two population PSC particle model.

Kent, G. S.↗