Search NASA⌕ Search

SEARCH · Search NASA

Results for “balancing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1942

Aerodynamic Characteristics for Internal-Balance and Frise Type Ailerons on an NACA 6 Series Low-Drag Tip Section of the Wing for the XP-63 Airplane

At the request of the Army Air Forces, Materiel Command, tests were made in the two-Dimensional low-turbulence tunnel of a mode l submitted by Bell Aircraft Corporation as the tip section of the wing of the xp-63 airplane. " The model was a NACA 66, 2x-2l6 a = 0.6 airfoil section of 50-inch chord and made of dural according to standard sheet-metal practice. The model was fitted for an internal-balance aileron with a tab and a Frise type aileron. Several alterations of the skirts and balance on the internal- balance aileron were tested to obtain the various aerodynamic characteristics of the aileron.

AILERONS - DEFLECTION↗
NASA NTRS2014

A Range Correction for Icesat and Its Potential Impact on Ice-sheet Mass Balance Studies

We report on a previously undocumented range error in NASA's Ice, Cloud and land Elevation Satellite (ICESat) that degrades elevation precision and introduces a small but significant elevation trend over the ICESat mission period. This range error (the Gaussian-Centroid or 'G-C'offset) varies on a shot-to-shot basis and exhibits increasing scatter when laser transmit energies fall below 20 mJ. Although the G-C offset is uncorrelated over periods less than1 day, it evolves over the life of each of ICESat's three lasers in a series of ramps and jumps that give rise to spurious elevation trends of −0.92 to −1.90 cm yr(exp −1), depending on the time period considered. Using ICESat data over the Ross and Filchner-Ronne ice shelves we show that (1) the G-C offset introduces significant biases in ice-shelf mass balance estimates, and (2) the mass balance bias can vary between regions because of different temporal samplings of ICESat.We can reproduce the effect of the G-C offset over these two ice shelves by fitting trends to sample-weighted mean G-C offsets for each campaign, suggesting that it may not be necessary to fully repeat earlier ICESat studies to determine the impact of the G-C offset on ice-sheet mass balance estimates.

mass balance↗
NASA NTRS2015

Towards an Understanding of Atmospheric Balance

During a 35 year period I published 30+ pear-reviewed papers and technical reports concerning, in part or whole, the topic of atmospheric balance. Most used normal modes, either implicitly or explicitly, as the appropriate diagnostic tool. This included examination of nonlinear balance in several different global and regional models using a variety of novel metrics as well as development of nonlinear normal mode initialization schemes for particular global and regional models. Recent studies also included the use of adjoint models and OSSEs to answer some questions regarding balance. lwill summarize what I learned through those many works, but also present what l see as remaining issues to be considered or investigated.

Balance↗
NASA NTRSDate not supplied

Additively Manufactured Wind Tunnel Balances for Propulsive Force Measurement

Propulsive forces and moments during powered descent are not understood well enough to design an entry, decent, and landing vehicle with high confidence using solely computational fluid dynamics modelling (CFD). Therefore, wind tunnel testing is required to quantify uncertainties in computational modeling and simulation. Wind tunnel balances are structural, high-precision, multi-axis force transducers that provide direct measurement of these aerodynamic forces and moments, however their complex designs make them costly and time consuming to produce and approaches used to manufacture them have not changed significantly since the 1960s. This work demonstrates that additive manufacturing (AM) can be used to manufacture wind tunnel balances with significantly reduced fabrication time and expense. Moreover, the design flexibility afforded by the additive manufacturing process has the potential to enable new capabilities with respect to measuring propulsion forces during entry, decent, and landing testing. Here we present two novel balance designs enabled by AM. One will provide direct measurement of aerodynamic interference forces and moments on powered descent models (retropropulsion forces) to support CFD validation and further development of Mars human landing vehicle concepts. The second design will be used to characterize a reaction control system during entry descent and landing testing over a wide Mach number range.

Wind tunnel balance↗
NASA NTRSDate not supplied

Additively Manufactured Balances for Propulsive Force Measurement

Propulsive forces and moments during powered descent are not understood well enough to design an entry, decent, and landing vehicle with high confidence using solely computational fluid dynamics modelling (CFD). Therefore, wind tunnel testing is required to quantify uncertainties in computational modeling and simulation. Wind tunnel balances are structural, high-precision, multi-axis force transducers that provide direct measurement of these aerodynamic forces and moments, however their complex designs make them costly and time consuming to produce and approaches used to manufacture them have not changed significantly since the 1960s. This work demonstrates that additive manufacturing (AM) can be used to manufacture wind tunnel balances with significantly reduced fabrication time and expense. Moreover, the design flexibility afforded by the additive manufacturing process has the potential to enable new capabilities with respect to measuring propulsion forces during entry, decent, and landing testing. Here we present two novel balance designs enabled by AM. One will provide direct measurement of aerodynamic interference forces and moments on powered descent models (retropropulsion forces) to support CFD validation and further development of Mars human landing vehicle concepts. The second design will be used to characterize a reaction control system during entry decent and landing testing over a wide Mach number range.

Wind tunnel balance↗
NASA NTRSDate not supplied

Graphical and Numerical Description of Strain-Gage Balance Interactions

A new approach for the graphical and numerical description of balance interactions is presented. The approach uses data from single-component loads as input. This choice has the two advantages. First, the number of applied loads is at the minimum needed for interactions to be observed. In addition, the loads used for the description of interactions can easily be repeated at different sites. Output differences relative to the outputs of the zero load point of a load series are used for the description of interactions. Similarly, load differences relative to the loads of the zero load point of a load series are used for the description of the loads. Interactions are plotted versus the load differences for each load component while omitting the outputs of the primary gage of the chosen load component. The resulting plots have a characteristic star pattern as interactions are zero at zero load. Numerical estimates of the slopes of the interactions can be reverse-engineered from the load prediction equations of a balance if calibration data is examined. The slopes are the off-diagonal coefficients of the inverse of the matrix that has the coefficients of the linear terms of the fitted loads if the Non-Iterative Method is used for the analysis. Similarly, the slopes are the off-diagonal coefficients of the inverse of the matrix that is the non-iterative part of the primary load iteration equation if the Iterative Method is used for the analysis. Data from the calibration of a force balance is processed to illustrate the proposed graphical and numerical description of interactions.

wind tunnel test↗
NASA NTRSDate not supplied

Graphical and Numerical Description of Strain-Gage Balance Interactions

A new approach for the graphical and numerical description of strain-gage balance interactions is presented. The approach uses data from single-component loads as input. This choice has the two advantages. First, the number of applied loads is at the minimum needed for interactions to be observed. In addition, the loads used for the description of interactions can easily be repeated at different sites. Output differences relative to the outputs of the zero load point of a load series are used for the description of interactions. Similarly, load differences relative to the loads of the zero load point of a load series are used for the description of the loads. Interactions are plotted versus the load differences for each load component while omitting outputs of the primary gage of the chosen load component. The resulting plots have a star pattern as all interactions are zero at zero load. Estimates of the slopes of the interactions can be obtained from the load prediction equations of a balance if calibration data is examined. The slopes are the off-diagonal coefficients of the inverse of the matrix that has the coefficients of the linear terms of the fitted loads if the Non-Iterative Method is used for the analysis. Similarly, the slopes are the off-diagonal coefficients of the inverse of the matrix that is the non-iterative part of the primary load iteration equation if the Iterative Method is used for the analysis. Data sets from a manual and a machine calibration of a force balance are processed to illustrate the proposed description of interactions.

strain-gage balance↗
DOE OSTI2024

Interactions Between Climate and Species Drive Future Forest Carbon and Water Balances

Global change is altering forest carbon and water balances; however, the extent to which tree species shape ecosystem‐scale responses to climate, particularly in biodiverse forests, remains unclear. To address this, we simulated the effects of an envelope of future climate conditions on watershed carbon and water balances and quantified the contributions of tree species based on their xylem anatomy. We accomplished this by incorporating species‐level transpiration calculations into a landscape‐scale ecosystem process model. Our revised model linked the effects of forest succession, species composition, and climate change on water and carbon. Calibration of forest water fluxes using sap flux measurements and catchment water balances captured variability in species transpiration and interannual ET in biodiverse, humid temperate forest catchments in the southern Blue Ridge Mountains, USA. Across wet and dry future climate projections, ET increased, and streamflow and net carbon uptake decreased, particularly under a scenario of increasing drought. Despite accounting for just 30% of current biomass, diffuse‐porous tree species were the main driver of carbon and water flux responses now and in the future, thus intensifying the increase in ET and decline in streamflow. As diffuse‐porous biomass continues to increase, these forests will be increasingly sensitive to drought, amplifying losses of carbon sequestration and freshwater delivery.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Metabolic flux and resource balance in the oleaginous yeast Rhodotorula toruloides

The yeast Rhodotorula toruloides is a promising bioproduction organism due to its high lipid yields and ability to grow on cheap and abundant substrates. Quantitative, systems-level assessment of its metabolic activity is accordingly merited. Resource-balance analysis (RBA) models capture not only reaction stoichiometry but also enzyme requirements for catalysis, providing valuable tools for understanding metabolic trade-offs and optimizing metabolic engineering strategies. Here, in this work, we present systems-level measurements of R. toruloides metabolic flux based on isotope tracing and metabolic flux analysis. In combination with new proteomic measurements, these flux data are used to parameterize a genome-scale resource balance model rtRBA. We find that S. cerevisiae and R. toruloides grow at nearly indistinguishable rates using similar biosynthetic but dramatically different central metabolic programs. R. toruloides consumes one-fifth as much glucose, which it metabolizes primarily via the pentose phosphate pathway and TCA cycle unlike primarily glycolysis in S. cerevisiae . Overall, across these two divergent yeasts, protein abundances aligned more closely than metabolic flux. Resource balance modeling of these metabolic programs predicts superior theoretical yields but lower productivities in R. toruloides than S. cerevisiae for industrial chemicals, highlighting the value of rapid glucose uptake for productivity but respiratory metabolism for yields.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Spectroscopic Online Monitoring: Using a Multi-Track Visible Spectrometer to Facilitate a Mass Balance Study in a Simulated TALSPEAK Process

Nuclear energy is a promising low-carbon energy candidate to meet the increased demand for green energy, where the integration of fuel recycling can have significant benefits for material usage and waste reduction. Utilizing in situ monitoring tools can provide ample opportunities to better control and safeguard nuclear material recycle processes while also offering knowledge and insight into real-time solution properties. The simultaneous measurement of analytical targets in multiple process locations can enable real-time mass balance and material accountancy calculations. This is demonstrated here with a mass balance study of Nd 3+ on countercurrent aqueous/organic metal extraction within a single centrifugal contactor. The Nd 3+ concentration was simultaneously monitored at the inlets and outlets of both aqueous and organic phases using a visible absorbance detector that allowed for the simultaneous measurement of up to six locations. The Nd 3+ concentration was calculated by using chemical data science algorithms, where model training sets were collected on a single track of the detector. The discussion includes addressing the challenges of using a model collected on a single track and applying it as a model across the other tracks on the detector. Each track of the detector corresponds to one measurement location on the contactor. The difference in the integrated moles of Nd 3+ between the inlet and outlet at the end of the experiment was near zero, indicating that the mass balance of this experiment was maintained. Overall, the online spectroscopic monitoring was able to follow changing solution conditions and accurately measure the concentration of Nd 3+ in different locations within the contactor system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Cage Balancing Enhances Optoelectronic and Lasing Performance in Stable Quasi-2D Tin Iodide Perovskites

Two-dimensional (2D) tin halide perovskites are highly tunable and low-toxicity semiconductors, promising for next-generation optoelectronics. However, achieving air stability and excellent photophysical properties simultaneously necessitates deliberate structure tuning using organic spacer cations and A-site cations. Here, we report a series of new quasi-2D Ruddlesden–Popper tin halide perovskites using a fluorinated aromatic spacer cation, 4-fluorophenethylammonium (4FPEA), and systematically investigate the impacts of layer thickness, spacer cation, and A-site cation on the crystal structures and optical properties of (4FPEA) 2 (A) n−1 S n I 3n+1 . These 4FPEA-based 2D tin perovskites, further tuned by the A-cations, exhibit uniquely undistorted 180° out-of-plane Sn–I–Sn bond angles and low octahedral distortions compared to other quasi-2D perovskites and demonstrate prolonged air stability, excellent photophysics, and amplified spontaneous emission and lasing in exfoliated microflakes. A comprehensive survey of reported n = 2 lead and tin iodide perovskites reveals that all structures can be classified into three types (tilted, balanced, and buckled) based on the structural distortion parameters of their perovskite cages. Notably, (4FPEA) 2 (A)Sn 2 I 7 are among the handful of “balanced” n = 2 perovskites with minimal distortion and excellent optoelectronic performance. Furthermore, the structural insights and cage-balancing approach revealed herein motivate the deliberate design of quasi-2D perovskites through the synergy of the spacer and cage cations, further paving the way for high-performance optoelectronic applications of stable tin halide perovskites.

Cations↗
DOE OSTI2025

Representing Fine‐Scale Topographic Effects on Surface Radiation Balance in Hyper‐Resolution Land Surface Models

Land surface models are increasingly used to simulate land surface processes at hyper-spatial resolutions (e.g., ∼1 km). As model resolution increases, grid-scale topographic effects on surface radiation fluxes and their interactions between adjacent grids become more pronounced. However, current land surface models routinely neglect the fine-scale topographic effects on surface radiation balance. This study developed physically-based and computationally-efficient parameterizations (fineTOP) that explicitly resolve fine-scale topographic effects on downward shortwave and longwave radiation as well as land surface radiative properties. The newly developed parameterizations were implemented and tested in the Energy Exascale Earth System Model (E3SM) Land Model (ELM). Multi-decadal km-resolution ELM simulations over the California Sierra Nevada show that fine-scale topography significantly impacts the surface energy balance and snow processes across seasons. Slope determines the magnitude of topographic effects, while aspect controls their sign. For slopes larger than 30°, topography-induced change in annual surface temperature can be as large as 3.3 K. Regionally, the mean value and standard deviation of topography-induced changes in annual surface temperature are −0.22 ± 0.38 K and +0.25 ± 0.37 K over north-facing and south-facing slopes, respectively. Topography-induced changes in surface radiative properties account for 3.5% ± 13.8% of total topographic effects on annual net radiation. With fineTOP, ELM captures the aspect-dependence of snow cover fraction, snow water equivalent, and land surface temperature found in MODIS satellite observations and a snow reanalysis data set, while the default ELM fails to capture this phenomenon. The enhanced capability to represent fine-scale topographic effects on surface radiation balance can be used to advance understanding of the role of fine-scale topography in land surface processes and land-atmosphere interactions over mountainous regions.

Hao, Dalei [Pacific Northwest National Laboratory ↗
DOE OSTI2025

Traceable and Scalable Food Balance Sheets from Agricultural Commodity Supply and Utilization Accounts (2010–2022)

Abstract The Food Balance Sheets (FBS), compiled by the Food and Agriculture Organization (FAO), serve as a cornerstone dataset for studies on agricultural development, food security, and dietary health, providing a broad overview of global and regional food systems. However, its limited transparency and scalability hinder its application in empirical analysis and multisector dynamic modeling. Here, we present a traceable Food Balance Sheets (T-FBS) dataset, developed from detailed Supply Utilization Accounts (SUA) using a novel Primary Commodity equivalent (PCe) aggregation approach. This framework enables the aggregation of commodity flows along supply chains while ensuring consistency and balance across multiple dimensions. The T-FBS dataset includes 57 PCe commodities across 195 regions for the period 2010–2022, consolidated from over 500 SUA products. While T-FBS closely aligns with FAO-FBS at aggregate levels for dietary energy and macronutrients, it identifies key uncertainties in other elements (e.g., feed, trade, stocks). By enhancing methodological transparency, traceability, and scalability, T-FBS strengthens the robustness of food system studies and fosters future research and collaboration within the open-source community.

agriculture↗
DOE OSTI2026

Data for "Quantifying the Propagation of Parametric Uncertainty on Flux Balance Analysis"

In the repository are example scripts that perform uncertainty injection and propagation to flux balance analysis with outputs for a small sample size (for demonstration purpose only). For proper analysis, user should download the scripts and run for a large sample size (e.g., 10,000 samples). If you use the scripts, please cite the following Metabolic Engineering article: “Quantifying the propagation of parametric uncertainty on flux balance analysis” (https://doi.org/10.1016/j.ymben.2021.10.012) There are two subdirectories: /uncFBA/uncBiom: injection of normally distributed noise to biomass precursor coeffcients and ATP maintenance (growth-associated ATP maintenance (GAM) and non-growth associated ATP maintenance (NGAM)) /uncFBA/uncRHS: departure from steady-state by adding noise drawn from normal distribution to the RHS terms of mass balance constraints

Metabolomics↗
DOE OSTI2025

Single-element balanced detector giving 65 dB CMRR at 30 MHz

We present a simple design for a single-element balanced detector (BD) that utilizes optical fibers in the sensing and reference channels with path length differences set to detect the differential signal at a desired frequency. With this approach, we easily achieve a common-mode rejection ratio of 65 dB, corresponding to the shot-noise limit of our setup. The CMRR demonstration is made in the MHz frequency range but could be extended to the kHz or GHz range. Using a single detector, the BD achieves stable CMRR over extended periods and does not require careful matching of detectors and amplification electronics. We demonstrate the single-element balanced detector design using the optical Kerr effect induced by a 30 MHz pulsed laser, showing a significant improvement over similar experiments using a commercial balanced detector.

Badilla-Nunez, Kelly [Georgia Institute of Technol↗
DOE OSTI2025

Developing a Vaccine Platform for a Balanced Mucosal Immune Response (CB11446), Project Report: Year 1

Mucosal vaccines can elicit protective immune responses at the infection site of respiratory or aerosolized pathogens. Achieving balanced mucosal and systemic responses is a key challenge in the design of mucosal vaccines, especially in terms of developing a broadly applicable vaccine delivery platform amenable to a wide range of subunit vaccine antigens. The overarching goal of the project entitled “Developing a Vaccine Platform for a Balanced Mucosal Immune Response” is to develop a pathogen-agnostic vaccine platform that elicits robust and balanced mucosal immune responses upon intranasal vaccination, in the context of a nanolipoprotein particle (NLP) platform. In year one, we investigated NLP-based vaccine formulations incorporating select immune adjuvants (Monophosphoryl Lipid A (MPLA), FSL-1, L18-muramyl dipeptide (MDP), and cholesterol-tagged ODN2006 (cCpG)) along with antigens relevant to plague (LcrV), tularemia (IglC), and Ebola virus (GP). We demonstrated the ability to prepare, characterize, and quantify these formulations. We then carried out studies in vivo using a BALB/c mouse model, comparing intranasal and intramuscular administration and systematically evaluated the resulting mucosal and systemic immune responses using ELISpot and ELISAs. All proposed tasks (Table 1) were completed within the twelve-month base period, and the established go/no go metric was successfully achieved. Numerous adjuvant:LcrV:NLP formulations were found to have statistically significant increases in IgA titers in serum and/or lung upon IN administration (compared to IM administration), while also producing robust IgG responses in serum. Some formulations also showed significant IFNγ responses using restimulated splenocytes. The data collected during the base period provide valuable insights for the future design of safe and effective mucosal subunit vaccines while also highlighting areas of research that merit further investigation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

The Dynamic Tripolar Strategic Balance: A Net Assessment (Workshop Summary)

On December 9-10, the Center for Global Security Research (CGSR) at Lawrence Livermore National Laboratory (LLNL) hosted a workshop titled “The Dynamic Tripolar Strategic Balance: A Net Assessment.” The discussion was guided by the following key questions: • By what metrics should the strategic balance be assessed? • How dynamic is the balance? How fragile? • Is the United States gaining strategic advantage, losing it, or holding steady, overall? • In order to gain new advantages or re-gain advantages lost, can or should the United States prioritize some domains and accept more risk in others? If so, which ones?

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
NASA NTRS1972

Recent developments in a wind tunnel magnetic balance.

A functional description of a prototype six component magnetic balance system for wind tunnel application is presented. The relationship of forces and moments on a ferromagnetic body to applied magnetic fields and gradients is shown. The method of producing the required fields in the prototype balance, its magnet arrangement and its performance are discussed. Aerodynamic data obtained with this balance on several model geometries are presented and compared with wind tunnel and ballistic range results.

Stephens, T.↗