SEARCH · Search NASA

Results for “baseline selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

All sources NASA NTRS DOE OSTI

NASA NTRS2018

Görtler Instability and Its Control via Surface Suction over an Axisymmetric Cone at Mach 6

The characteristics of Görtler instability over an axisymmetric cone with an aft concave section are studied via linear and nonlinear instability analysis and direct numerical simulations. Several options for the cone geometry have been investigated numerically, subject to a fixed forecone section and constraints on the maximum cone diameter, overall cone length, and minimum N-factor for the most amplified Görtler modes. Computations show that it is possible to design a cone with a peak N-factor of Nmax > 8 at the target Reynolds number of 12.1×10(exp 6) per meter, corresponding to the maximum quiet Reynolds number in the Boeing/AFOSR Mach-6 Quiet Tunnel at Purdue University. Direct numerical simulations show that an array of roughness elements corresponding to a peak roughness height of 0.1006 mm at the center can excite Görtler vortices that evolve into sufficiently strong streamwise streaks that may break down via high-frequency secondary instability. Thus, the selected axisymmetric configuration of interest should provide an acceptable baseline to investigate the feasibility of several aspects of laminar-flow control via boundary-layer suction. The apparatus that is being used for measurements in the Boeing/AFOSR Quiet Tunnel is described, along with some preliminary experimental results.

Gortler vortices↗

NASA NTRS2015

The Impact of Radiation Damage on Photon Counting with an EMCCD for the WFIRST-AFTA Coronagraph

WFIRST-AFTA is a 2.4m class NASA observatory designed to address a wide range of science objectives using two complementary scientiﬁc payloads. The Wide Field Instrument (WFI) oﬀers Hubble quality imaging over a 0.28 square degree ﬁeld of view, and will gather NIR statistical data on exoplanets through gravitational microlensing. The second instrument is a high contrast coronagraph that will carry out the direct imaging and spectroscopic analysis of exoplanets, providing a means to probe the structure and composition of planetary systems. The coronagraph instrument is expected to operate in low photon ﬂux for long integration times, meaning all noise sources must be kept to a minimum. In order to satisfy the low noise requirements, the Electron Multiplication (EM)-CCD has been baselined for both the imaging and spectrograph cameras. The EMCCD was selected in comparison with other candidates because of its low eﬀective electronic read noise at sub-electron values with appropriate multiplication gain setting. The presence of other noise sources, however, such as thermal dark signal and Clock Induced Charge (CIC), need to be characterised and mitigated. In addition, operation within a space environment will subject the device to radiation damage that will degrade the Charge Transfer Eﬃciency (CTE) of the device throughout the mission lifetime. Here we present our latest results from pre- and post-irradiation testing of the e2v CCD201-20 BI EMCCD sensor, baselined for the WFIRST-AFTA coronagraph instrument. A description of the detector technology is presented, alongside considerations for operation within a space environment. The results from a room temperature irradiation are discussed in context with the nominal operating requirements of AFTA-C and future work which entails a cryogenic irradiation of the CCD201-20 is presented.

Peddada, Pavani↗

NASA NTRS2005

A Method for Aircraft Concept Selection Using Multicriteria Interactive Genetic Algorithms

The problem of aircraft concept selection has become increasingly difficult in recent years as a result of a change from performance as the primary evaluation criteria of aircraft concepts to the current situation in which environmental effects, economics, and aesthetics must also be evaluated and considered in the earliest stages of the decision-making process. This has prompted a shift from design using historical data regression techniques for metric prediction to the use of physics-based analysis tools that are capable of analyzing designs outside of the historical database. The use of optimization methods with these physics-based tools, however, has proven difficult because of the tendency of optimizers to exploit assumptions present in the models and drive the design towards a solution which, while promising to the computer, may be infeasible due to factors not considered by the computer codes. In addition to this difficulty, the number of discrete options available at this stage may be unmanageable due to the combinatorial nature of the concept selection problem, leading the analyst to arbitrarily choose a sub-optimum baseline vehicle. These concept decisions such as the type of control surface scheme to use, though extremely important, are frequently made without sufficient understanding of their impact on the important system metrics because of a lack of computational resources or analysis tools. This paper describes a hybrid subjective/quantitative optimization method and its application to the concept selection of a Small Supersonic Transport. The method uses Genetic Algorithms to operate on a population of designs and promote improvement by varying more than sixty parameters governing the vehicle geometry, mission, and requirements. In addition to using computer codes for evaluation of quantitative criteria such as gross weight, expert input is also considered to account for criteria such as aeroelasticity or manufacturability which may be impossible or too computationally expensive to consider explicitly in the analysis. Results indicate that concepts resulting from the use of this method represent designs which are promising to both the computer and the analyst, and that a mapping between concepts and requirements that would not otherwise be apparent is revealed.

Buonanno, Michael↗

NASA NTRS1973

Photoheliograph thermal concepts study. Volume 1: Summary

The performances of thermal subsystem concepts for each of three photoheliograph designs oriented toward unique solar observation missions are defined. These designs and missions may be categorized as: (1) A 150-centimeter photoheliograph for large Solar Observatory (LSO) missions; (2) a 100-centimeter photoheliograph for shuttle sorties; and (3) a 100-centimeter photoheliograph for balloon missions. For each of these photoheliograph designs are the basic thermal environments, boundary conditions, and applicable thermal control concepts defined, the interactions between concepts and environments determined, and a baseline thermal control concept for the three classes of photoheliographs selected. A set of experimental work plans describing the major efforts required to further the detailed design and to confirm analytical performance predictions is included.

Source record↗

NASA NTRS1978

Douglas Aircraft cabin fire tests

Program objectives are outlined as follows: (1) examine the thermal and environmental characteristics of three types of fuels burned in two quantities contained within a metal lavatory; (2) determine the hazard experienced in opening the door of a lavatory containing a developed fire; (3) select the most severe source fuel for use in a baseline test; and (4) evaluate the effect of the most severe source upon a lavatory constructed of contemporary materials. All test were conducted in the Douglas Cabin Fire Simulator.

Klinck, D.↗

NASA NTRS1981

Feasibility study: Atmospheric general circulation experiment, volume 2

The feasibility analysis of the atmospheric general circulation experiment (AGCE) are documented. The analysis performed in each technical area, the rationale and substantiation for the design approaches selected for the hardware, and the design details for the baseline AGCE are presented.

Homsey, R. J.↗

NASA NTRS1990

Innovative design of composite structures: The use of curvilinear fiber format to improve buckling resistance of composite plates with central circular holes

The gains in buckling performance are explored that can be achieved by deviating from the conventional straightline fiber format and considering the situation whereby the fiber orientation in a layer, or a group of layers, can vary from point to point. The particular situation studied is a simply supported square plate with a centrally located hole loaded in compression. By using both a sensitivity analysis and a gradient-search technique, fiber orientation in a number of regions of the plate are selected so as to increase the buckling load relative to baseline straightline designs. The sensitivity analysis is used to determine which regions of the plate have the most influence on buckling load, and the gradient search is used to find the design that is believed to represent the absolute maximum buckling load for the conditions prescribed. Convergence studies and sensitivity of the final design are discussed. By examining the stress resultant contours, it is shown how the curvilinear fibers move the load away from the unsupported hole region of the plate to the supported edges, thus increasing the buckling capacity. The tensile capacity of the improved buckling design is investigated, and it is shown that both tensile capacity and buckling capacity can be improved with the curvilinear fiber concept.

Hyer, M. W.↗

NASA NTRS1991

The use of curvilinear fiber format to improve buckling resistance of composite plates with central circular holes

Hyer, M. W.↗

NASA NTRS1990

Evolving EVA system capability for the evolving Space Station Freedom requirements

Viewgraphs on evolving extravehicular activity (EVA) system capability for the evolving Space Station Freedom requirements are presented. Topics covered include: pre-scrub 1989 baseline; approach shift resulting from scrub 1989; considerations for alternative selection; EVA supply options; and key technologies for evolution of EVA system life support.

Slade, Howard↗

NASA NTRS2005

Participation in the Analysis of the Far-Infrared/Submillimeter Interferometer

We have contributed to the development of the Submillimeter Probe of the Evolution of Cosmic Structure (SPECS) by analyzing various aspects related to the tethers that connect the spacecraft of this space interferometer. We have focused our analysis on key topics as follows: (a) helping in the configuration selection; (b) computing the system eigenfrequencies as a function of baseline length; (c) developing techniques and conceptual design of devices for damping the tether oscillations; (d) carrying out numerical simulations of tethered formation to assess the effects of environmental perturbations upon the baseline length variation; (e) devising control laws for fast retargeting of the interferometer at moderate baseline lengths; (f) estimating the survivability to micrometeoroid impacts of a tether at L2; and (g) developing a conceptual design of a high-strength and survivable tether.

Lorenzini, Enrico C.↗

NASA NTRS2005

Participation in the Analysis of the Far-Infrared/Submillmeter Interferometer

We have contributed to the development of the Submillimiter Probe of the Evolution of Cosmic Structure (SPECS) by analyzing various aspects related to the tethers that connect the spacecraft of this space interferometer. We have focused our analysis on key topics as follows: (a) helping in the configuration selection; (b) computing the system eigenfrequencies as a function of baseline length; (c) developing techniques and conceptual design of devices for damping the tether oscillations; (d) carrying out numerical simulations of tethered formation to assess the effects of environmental perturbations upon the baseline length variation; (e) developing control laws for reconfiguring the baseline length; (f) devising control laws for fast retargeting of the interferometer at moderate baseline lengths; (g) estimating the survivability to micrometeoroid impacts of a tether at L2; and (h) developing a conceptual design of a high- strength and survivable tether. The work was conducted for NASA Goddard Space Flight Center under Grant NNG04GQ21G with William Danchi as technical monitor.

Lorenzini, Enrico C.↗

NASA NTRS1996

TPS Sizing for Access-to-Space Vehicles

A study was carried out to identify, develop, and benchmark simulation techniques needed for optimum thermal protection system (TPS) material selection and sizing for reusable launch vehicles. Fully viscous, chemically reacting, Navier-Stokes flow solutions over the Langley wing-body single stage to orbit (SSTO) configuration were generated and coupled with an in-depth conduction code. Results from the study provide detailed TPS heat shield materials selection and thickness sizing for the wing-body SSTO. These results are the first ever achieved through the use of a complete, trajectory based hypersonic, Navier-Stokes solution database. TPS designs were obtained for both laminar and turbulent entry trajectories using the Access-to-Space baseline materials such as tailorable advanced blanket insulation. The TPS design effects (materials selection and thickness) of coupling material characteristics to the aerothermal environment are illustrated. Finally, a sample validation case using the shuttle flight database is included.

Henline, William↗

NASA NTRS1974

Shuttle user analysis (study 2.2). Volume 4: Standardized subsystem modules analysis

The capability to analyze payloads constructed of standardized modules was provided for the planning of future mission models. An inventory of standardized module designs previously obtained was used as a starting point. Some of the conclusions and recommendations are: (1) the two growth factor synthesis methods provide logical configurations for satellite type selection; (2) the recommended method is the one that determines the growth factor as a function of the baseline subsystem weight, since it provides a larger growth factor for small subsystem weights and results in a greater overkill due to standardization; (3) the method that is not recommended is the one that depends upon a subsystem similarity selection, since care must be used in the subsystem similarity selection; (4) it is recommended that the application of standardized subsystem factors be limited to satellites with baseline dry weights between about 700 and 6,500 lbs; and (5) the standardized satellite design approach applies to satellites maintainable in orbit or retrieved for ground maintenance.

Source record↗

NASA NTRS2006

Baseline HSR Inlet and Engine Bay Cowl Seal Requirements

The two dimensinal bifurcated inlet, down selected for the HSR program, and the engine bay cowling consist of many sealing interfaces. The variable geometry characteristics of this inlet and the size of the propulsion system impose new sealing requirements for commercial transport aircraft. Major inlet systems requiring seal development and testing include the ramp system, the bypass/take-off system, and the inlet/engine interface. Engine bay cowling seal interfaces include the inlet/cowling interface, the keel split line, the hinge beam/engine bay cowling, and the nozzle/cowling interface. These seals have to withstand supersonic flight operating temperatures and pressures with typical commercial aircraft reliability and lives. The operating conditions and expected seal lives will be identified for the various interfaces. Boeing's SST seal development program will also be discussed.

Sandquist, David↗

NASA NTRS1991

Options in the global change fleet architecture provided by the presence of an EOS-A and -B

The baseline architecture of the Global Change Technology Initiative (GCTI) fleet was established by selecting and designing spacecraft and instruments to meet the science requirements developed under the task 1 effort. While attempting to meet the temporal sampling portion of the science requirements, no consideration was given to the presence of the proposed Earth Observing System (EOS) Spacecraft that would be making many of the same measurements with many of the same instruments. After establishing the GCTI baseline independent of the EOS Spacecraft; however, it is now prudent to examine the impact of the presence of the EOS Spacecraft on the GCTI fleet. A small scope, GCTI study supplement was accomplished to assess the impact. The content and results of the supplementary study are presented.

Hypes, Warren D.↗

NASA NTRS1983

Photovoltaic stand-alone modular systems, phase 2

The final hardware and system qualification phase of a two part stand-alone photovoltaic (PV) system development is covered. The final design incorporated modular, power blocks capable of expanding incrementally from 320 watts to twenty kilowatts (PK). The basic power unit (PU) was nominally rated 1.28 kWp. The controls units, power collection buses and main lugs, electrical protection subsystems, power switching, and load management circuits are housed in a common control enclosure. Photo-voltaic modules are electrically connected in a horizontal daisy-chain method via Amp Solarlok plugs mating with compatible connectors installed on the back side of each photovoltaic module. A pair of channel rails accommodate the mounting of the modules into a frameless panel support structure. Foundations are of a unique planter (tub-like) configuration to allow for world-wide deployment without restriction as to types of soil. One battery string capable of supplying approximately 240 ampere hours nominal of carryover power is specified for each basic power unit. Load prioritization and shedding circuits are included to protect critical loads and selectively shed and defer lower priority or noncritical power demands. The baseline system, operating at approximately 2 1/2 PUs (3.2 kW pk.) was installed and deployed. Qualification was successfully complete in March 1983; since that time, the demonstration system has logged approximately 3000 hours of continuous operation under load without major incident.

Naff, G. J.↗

NASA NTRS1990

Freedom Station wall design using hydrodynamic modelling

The paper outlines selected outputs from an ongoing Marshall Space Flight Center/US Army Corps of Engineers parametric study of the effects of meteoroid/space debris impacts on Space Station Freedom module wall protection structures. The advantages and limitations of HULL hydrocode computer simulation are discussed, and examples of meteoroid/ debris impacts on various wall structural designs are presented. Trends in the terminal effects of particle sizes, velocities, shapes, and impact angles upon structural design parameters (wall and bumper thickness and spacing) are summarized and depicted through selected simulation runs. Throughout the paper, proposed structural modifications to the baseline module protection structure will be examined which are capable of mitigating damage from particle impacts.

Williamsen, Joel E.↗

NASA NTRS1993

Earth Observing System (EOS) real-time onboard orbit determination

The paper describes the TDRSS Onboard Navigation System (TONS) selected by NASA/GSFC for the EOS-AM1 spacecraft as the baseline navigation system for real-time onboard orbit determination. Particular attention is given to the TONS algorithms and environmental models, the general design considerations, the algorithm implementation, and the required hardware. Results are presented of the covariance analysis for the nominal onboard and instrument requirements.

Folta, David C.↗