Search NASA⌕ Search

SEARCH · Search NASA

Results for “characterization techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Evaluation of satellite remote sensing and automatic data techniques for characterization of wetlands and coastal marshlands

The author has identified the following significant results. ERTS digital data has been used to detect and measure accretion in the large estuarial system of the Atchafalaya River in southern Louisiana. Comparisons of aerial photography taken in October 1970 with a computer printout of ERTS digital data collected on October 1, 1972, show that in a delineated area of 1400 hectares (3460 acres) an accretion of land area in the amount of 112 hectares (277 acres) had occurred. Analysis of band 3 of the ERTS MSS was used to make a land-water map of the area. The accretion test area was marked on this map and the percentage of elements indicated as land was calculated. This percentage was then multiplied by the total test area to obtain the area of land on the date of the ERTS observation for comparison with the aerial photography. Significant improvement in classification accuracy of ERTS MSS data has been achieved by use of a priori probabilities of occurrence in pattern recognition programs. Two classifications were made with accuracies of 76.0% and 81.5%, respectively.

Cartmill, R. H.↗

Evaluation of satellite remote sensing and automatic data techniques for characterization of wetlands and coastal marshlands

The author has identified the following significant results. The evaluation was conducted in a humid swamp and marsh area of southern Louisiana. ERTS digital multispectral scanner data was compared with similar data gathered by intermediate altitude aircraft. Automatic data processing was applied to several data sets to produce simulated color infrared images, analysis of single bands, thematic maps, and surface classifications. These products were used to determine the effectiveness of satellites to monitor accretion of land, locate aquatic plants, determine water characteristics, and identify marsh and forest species. The results show that to some extent all of these can be done with satellite data. It is most effective for monitoring accretion and least effective in locating aquatic plants. The data sets used show that the ERTS data is superior in mapping quality and accuracy to the aircraft data. However, in some applications requiring high resolution or maximum use of intermittent clear weather conditions, data gathering by aircraft is preferable. Data processing costs for equivalent areas are about three times greater for aircraft data than ERTS data. This is primarily because of the larger volume of data generated by the high resolution aircraft system.

Cartmill, R. H.↗

A laser technique for characterizing the geometry of plant canopies

The interception of solar power by the canopy is investigated as a function of solar zenith angle (time), component of the canopy, and depth into the canopy. The projected foliage area, cumulative leaf area, and view factors within the canopy are examined as a function of the same parameters. Two systems are proposed that are capable of describing the geometrical aspects of a vegetative canopy and of operation in an automatic mode. Either system would provide sufficient data to yield a numerical map of the foliage area in the canopy. Both systems would involve the collection of large data sets in a short time period using minimal manpower.

Vanderbilt, V. C.↗

Coaxial carbon plasma gun deposition of amorphous carbon films

A unique plasma gun employing coaxial carbon electrodes was used in an attempt to deposit thin films of amorphous diamond-like carbon. A number of different structural, compositional, and electrical characterization techniques were used to characterize these films. These included scanning electron microscopy, scanning transmission electron microscopy, X ray diffraction and absorption, spectrographic analysis, energy dispersive spectroscopy, and selected area electron diffraction. Optical absorption and electrical resistivity measurements were also performed. The films were determined to be primarily amorphous, with poor adhesion to fused silica substrates. Many inclusions of particulates were found to be present as well. Analysis of these particulates revealed the presence of trace impurities, such as Fe and Cu, which were also found in the graphite electrode material. The electrodes were the source of these impurities. No evidence of diamond-like crystallite structure was found in any of the film samples. Details of the apparatus, experimental procedure, and film characteristics are presented.

Sater, D. M.↗

Flaw imaging and ultrasonic techniques for characterizing sintered silicon carbide

The capabilities were investigated of projection microfocus x-radiography, ultrasonic velocity and attenuation, and reflection scanning acoustic microscopy for characterizing silicon carbide specimens. Silicon carbide batches covered a range of densities and different microstructural characteristics. Room temperature, four point flexural strength tests were conducted. Fractography was used to identify types, sizes, and locations of fracture origins. Fracture toughness values were calculated from fracture strength and flaw characterization data. Detection capabilities of radiography and acoustic microscopy for fracture-causing flaws were evaluated. Applicability of ultrasonics for verifying material strength and toughness was examined.

Baaklini, George Y.↗

Use of photostress techniques to characterize the mechanical behavior of weldments

Photoelastic coatings are useful to view strains in a large field and to examine strain gradients in the field. Contrary to strain gages which average strains along their length, photoelastic coatings provide measurements of strain over a gage length of essentially zero (at a point). When testing is done using specimens having welds between parent material, there are, in general, four zones in which strains may be significantly different. These zones are: (1) the weld material; (2) the fusion boundary; (3) the heat affected zone; and (4) the parent material. To date, most all strain measurement on welded specimens has been done using strain gages to measure in the various zones, thereby averaging across the strain gradient and across zone boundaries in some cases. In an effort to eliminate strain averaging, photoelastic coatings were used to characterize the mechanical behavior of weldments when tested in uniaxial tension. Data were taken at various points along the specimen and were used to construct stress-strain curves.

Gambrell, Samuel C., Jr.↗

A novel technique for characterizing the thickness of first-year sea ice with the GPS reflected signal

We have examined the characteristics of the GPS signal reflected off the sea ice surface and collected by an airborne or spaceborne receiver, forming a bistatic radar. The constellation of existing transmitters allows gathering bistatic reflections off the sea ice surface at different incidence angles over the course of a day, in contrast to a traditional radar that measures backscattering. We expect to see a strong coherent signal which is much higher than the incoherent one because of forward reflections from very smooth (particularly at L-band) and highly saline first year ice.

GPS ice thickness rough surface scattering↗

Development and Application of Advanced Measurement Techniques for Characterizing and Controlling Flow Instabilities in Axial Turbomachines

This report summarizes the recent progress in a project aimed at characterizing the flow structure, instabilities, and turbulence in axial compressors, and also on the utilization of casing grooves for delaying the onset of stall without performance degradation at high flow rates. Progress had been hindered by the COVID-19 laboratory closures and restrictions on the number of people that could be present in the laboratory during Fiscal Year 2020. Once the restrictions were lifted, the tasks described in this report were completed.

compressor↗

A Comprehensive Evaluation of the Performance and Materials Chemistry of a Sililcone-Based Replicating Compound

The objective of this project was to characterize the performance and chemistry of a siliconebased replicating compound. Some silicone replicating compounds are useful for critical inspection of surface features. Common applications are for examining micro-cracks, surface pitting, scratching, and other surface defects. Materials characterization techniques were used: FTIR, XPS, ToF-SIMS, AFM, and Confocal Microscopy to evaluate the replicating compound. These techniques allowed for the characterization and verification of the resolution capabilities and surface contamination that may be a result of using the compound. FTIR showed the compound is entirely made from silicone constituents. The AFM and Confocal Microscopy results showed the compound does accurately replicate the surface features to the claimed resolution. XPS and ToF-SIMS showed there is a silicone contaminant layer left behind when a cured replica is peeled off a surface. Attempts to clean off the contamination could not completely remove all silicone residues.

36 MATERIALS SCIENCE↗