Search NASA⌕ Search

SEARCH · Search NASA

Results for “charge yield”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Managing photoinduced electron transfer in AgInS2–CdS heterostructures

Ternary semiconductors such as AgInS2, with their interesting photocatalytic properties, can serve as building blocks to design light harvesting assemblies. The intraband transitions created by the metal ions extend the absorption well beyond the bandgap transition. The interfacial electron transfer of AgInS2 with surface bound ethyl viologen under bandgap and sub-bandgap irradiation as probed by steady state photolysis and transient absorption spectroscopy offers new insights into the participation of conduction band and trapped electrons. Capping AgInS2 with CdS shifts emission maximum to the blue and increases the emission yield as the surface defects are remediated. CdS capping also promotes charge separation as evident from the efficiency of electron transfer to ethyl viologen, which increased from 14% to 29%. The transient absorption measurements that elucidate the kinetic aspects of electron transfer processes in AgInS2 and CdS capped AgInS2 are presented. The improved performance of CdS capped AgInS2 offers new opportunities to employ them as photocatalysts.

Kipkorir, Anthony↗
DOE OSTI2022

Extraordinary anisotropic magnetoresistance in CaMnO 3 /CaIrO 3 heterostructures

The realization of four-fold anisotropic magnetoresistance (AMR) in novel 3d-5d heterostructures has boosted major efforts in antiferromagnetic spintronics. However, despite the potential of incorporating strong spin-orbit coupling, only small AMR signals have been detected thus far, prompting a search for new mechanisms to enhance the signal. In this study on CaMnO 3 /CaIrO 3 heterostructures, we report a unique dual-four-fold symmetric 70% AMR; a signal two orders of magnitude larger than previously observed in similar systems. We find that one order is enhanced by tuning a large biaxial anisotropy through octahedral tilts of similar sense in the constituent layers, while the second order is triggered by a spin-flop transition in a nearly Mott-type phase. Dynamics between these two phenomena as evidenced by the step-like AMR and a superimposed biaxial-anisotropy-induced AMR capture a subtle interplay of pseudospin coupling with the lattice and external magnetic field. Furthermore, our study shows that a combination of charge-transfer, interlayer coupling, and a spin-flop transition can yield a giant AMR relevant for sensing and antiferromagnetic memory applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Enhanced Surface Passivation by Atomic Layer Deposited Al 2 O 3 for Ultraviolet Sensitive Silicon Photomultipliers

Here, we describe a superior passivation of p-type (p + ) Si surface by Al 2 O 3 thin film that is synthesized by plasma-assisted atomic layer deposition for ultraviolet sensitive silicon photomultipliers (SiPM), compared to conventional SiO 2 and SiN x passivation schemes. The superiority of Al 2 O 3 passivation is due to not only a sufficiently low interface defect density but also a high density of built-in negative charges. A 7 nm thin Al 2 O 3 film can yield an emitter saturation current density of ~8 fA/cm 2 on high sheet resistance p + layer, compared to ~60 and ~1480 fA/cm 2 for thermal SiO 2 and SiN x passivation. This superior surface passivation allows the photon-generated carriers to have higher probabilities to reach the high-field region to trigger an avalanche event. In addition, Al 2 O 3 thin film provides very low values of effective surface recombination velocity on low resistivity n-type and p-type Si surfaces, which can lead to well-passivated surface features on guard ring and trench isolation regions of SiPM. These demonstrate the potential of Al 2 O 3 thin film passivation to improve quantum efficiency and thus photo-detection efficiency of ultraviolet sensitive SiPM with p + /n - /n/n + structure.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Orientation-dependent etching of silicon by fluorine molecules: A quantum chemistry computational study

Anisotropic etching is a widely used process in semiconductor manufacturing, in particular, for micro- and nanoscale texturing of silicon surfaces for black silicon production. The typical process of plasma-assisted etching uses energetic ions to remove materials in the vertical direction, creating anisotropic etch profiles. Plasmaless anisotropic etching, considered here, is a less common process that does not use ions and plasma. The anisotropy is caused by the unequal etching rates of different crystal planes; the etching process, thus, proceeds in a preferred direction. In this paper, we have performed quantum chemistry modeling of gas-surface reactions involved in the etching of silicon surfaces by molecular fluorine. The results confirm that orientation-dependent etch rates are the reason for anisotropy. The modeling of F 2 dissociative chemisorption on F-terminated silicon surfaces shows that Si–Si bond breaking is slow for the Si(111) surface, while it is fast for Si(100) and Si(110) surfaces. Both Si(100) and Si(110) surfaces incorporate a larger number of fluorine atoms resulting in Si–Si bonds having a larger amount of positive charge, which lowers the reaction barrier of F 2 dissociative chemisorption, yielding a higher etch rate for Si(100) and Si(110) surfaces compared to Si(111) surfaces. Molecular dynamics modeling of the same reactions has shown that the chosen reactive bond order potential does not accurately reproduce the lower reaction barriers for F 2 dissociative chemisorption on Si(100) and Si(100) surfaces. Furthermore, reparameterization is necessary to model the anisotropic etching process that occurs at lower temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

First observation of strange baryon enhancement with effective energy in pp collisions at the LHC

The production of (multi-)strange hadrons is measured at midrapidity in proton-proton collisions at $\sqrt{s}$ = 13 TeV as a function of the local charged-particle multiplicity in the pseudorapidity interval |η| < 0.5 and of the very-forward energy measured by the ALICE Zero-Degree Calorimeters. The latter provides information on the effective energy, i.e. the energy available for particle production in the collision once subtracted from the centre-of-mass energy. The yields of K$^{0}_{s}$, $Λ$ + $\overline{Λ}$, and $Ξ$ – + $\overline{Ξ}$ + per charged-particle increase with the effective energy. In addition, this work exploits a multi-differential approach to decouple the roles of local multiplicity and effective energy in such an enhancement. The results presented in this article provide new insights into the interplay between global properties of the collision, such as the initial available energy in the event, and the locally produced final hadronic state, connected to the charged-particle multiplicity at midrapidity. Notably, a strong increase of strange baryon production with effective energy is observed for fixed charged-particle multiplicity at midrapidity. These results are discussed within the context of existing phenomenological models of hadronisation implemented in different tunes of the PYTHIA 8 event generator.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Stepwise deprotonation of truxene: structures, metal complexation, and charge-dependent optical properties

As a planar subunit of C 60 -fullerene, truxene (C 27 H 18 ) represents a highly symmetrical rigid hydrocarbon with strong blue emission. Herein, we used truxene as a model to investigate the chemical reactivity of a fullerene fragment with alkali metals. Monoanion, dianion, and trianion products with different alkali metal counterions were crystallized and fully characterized, revealing the core curvature dependence on charge and alkali metal coordination. Moreover, a proton nuclear magnetic resonance study coupled with computational analysis demonstrated that deprotonation of the aliphatic CH 2 segments introduces aromaticity in the five-membered rings. Importantly, the UV-vis absorption and photoluminescence of truxenyl anions with different charges reveal intriguing charge-dependent optical properties, implying variation of the electronic structure based on the deprotonation process. An increase in aromaticity and π-conjugation yielded a red shift in the absorption and photoluminescent spectra; in particular, large Stokes shifts were observed in the truxenyl monoanion and dianion with high emission quantum yield and time of decay. Overall, stepwise deprotonation of truxene provides the first crystallographically characterized examples of truxenyl anions with three different charges and charge-dependent optical properties, pointing to their potential applications in carbon-based functional materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Robust ab initio predictions for dimensionless ratios of 𝐸⁢2 and radius observables. I. Electric quadrupole moments and deformation

We report that converged results for 𝐸⁢2 observables are notoriously challenging to obtain in ab initio no-core configuration interaction approaches. Matrix elements of the 𝐸⁢2 operator are sensitive to the large-distance tails of the nuclear wave function, which converge slowly in an oscillator basis expansion. Similar convergence challenges beset ab initio prediction of the nuclear charge radius. However, we exploit systematic correlations between the calculated 𝐸⁢2 and radius observables to yield meaningful predictions for relations among these observables. In particular, we examine ab initio predictions for dimensionless ratios of the form 𝑄/𝑟 2 for nuclei throughout the 𝑝 shell. Meaningful predictions for electric quadrupole moments may then be made by calibrating to the ground-state charge radius, if experimentally known, or vice versa. Moreover, these dimensionless ratios provide ab initio insight into the nuclear quadrupole deformation.

ab initio calculations↗
DOE OSTI2020

The charge reduction rate for multiply charged polymer ions via ion–ion recombination at atmospheric pressure

The charge reduction of multiply charged macromolecular ions via recombination with small ions in the gas phase is commonly employed to modulate the charge on macromolecules prior to mass spectrometric and mobility analyses. We employ a recently developed continuum-Molecular Dynamics (MD) calculation approach to determine the recombination rate coefficient of multiply charged (1 to 7 excess positive charged) polyethylene glycol ions (mass of 4600 Da) with smaller singly charged anions, modeled as NO 2 – ions. The continuum-MD approach accounts explicitly for the influence of the background gas on the recombination process, accounts explicitly for ion translational, vibrational, and rotational motion, and enables recombination rate coefficient calculation in nitrogen near atmospheric pressure, wherein neither low pressure nor high pressure recombination theories are strictly applicable. Continuum-MD simulations yield recombination rate coefficients near 3.9 × 10 –14 m 3 s –1 for singly charged ions, increasing to 3.0 × 10 –11 m 3 s –1 for the +7 ion. Pre-existing collision rate coefficient expressions for rigid ions are found to be within a factor of 2–5 of calculations for all charge states, but their use requires knowledge of an appropriate collision distance, which is not well-defined for flexible polymer ions. Continuum-MD-inferred rate coefficients are incorporated into a model of charge reduction, and the charge state distribution versus anion concentration determined with it is compared to charge reduction measurements made via atmospheric pressure differential mobility analysis. Furthermore, good agreement is observed between simulations and experiments; although results are extremely sensitive to the recombination rate coefficients, experimental results are bound by models utilizing rates within a factor of 2 (0.5–2.0×) of the continuum-MD rates.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Plasmon-Assisted Direct Interfacial Charge Transfer Enables Molecular Photodissociation on Metal Surfaces

Plasmonic photocatalysis is promising for driving reactions out of equilibrium, leading to enhanced rates and selectivity, but the energy and charge transfer mechanism at the interface remains to be explored. Here, we revisit visible-light plasmon-assisted photodissociation of dimethyl disulfide molecules (S–S bond cleavage) over single-crystalline silver and copper surfaces, using density functional theory calculations and the delta self-consistent field method. We investigate different excitation mechanisms and show that the direct intramolecular excitations, as suggested earlier to explain the experimental findings, cannot address the observed catalytic bond activation. Instead, the calculated excitations mediated by the metal Fermi level agree well with the threshold energy and maximum-yield energy in experiments and suggest that the reaction follows a direct interfacial charge transfer mechanism. Furthermore, we show that the excitation energy and the charge transfer can be modulated by introducing excess charges in the systems. Here, this study thus provides a fundamental understanding of interfacial charge transfer for driving plasmonic photocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Electron transfer calculations between edge sharing octahedra in hematite, goethite, and annite

A key reaction underlying the charge transport in iron containing oxides, clays, micas is the Fe$^{2+}$-Fe$^{3+}$ exchange reaction between edge-sharing iron octahedra. These reactions facilitate conduction in these minerals by the thermally-activated hopping of small polarons across the lattice. Depending on the mineral and local charge state the small polaron can either encase an electron or hole. The probability for conduction of small polarons depends strongly on the height and adiabicity of the reaction barrier, with larger and more diabatic barriers yielding slow conduction associated with either weak coupling or a large prerequisite rearrangement of the lattice during charge transport. To model these reactions, a first principle electron transfer (ET) method was developed to model the small polaron hopping between the edge-sharing octahedra sites in hematite ($e^{-}$ polaron), goethite ($e^{-}$ polaron), and annite ($h^{+}$ polaron) bulk structures. The ET method is based on electronic structure methods (i.e., plane-wave Density Functional Theory) capable of performing calculations with periodic cells and large size systems efficiently while at the same time being accurate enough to be used in the estimation of the electron-transfer coupling matrix element, $V_{AB}$, and the electron transfer transmission factor, $\kappa_{el}$. Additionally, the calculations confirmed the existence of small polarons in all three minerals, and the reactions were predicted to be strongly adiabatic. It was found that transfer of a hole in the octahedral layer of annite had an adiabatic barrier of $0.311$ eV, and the transfer of an extra electron in hematite and goethite had adiabatic barriers of $0.242$ eV and $0.232$ eV respectively. The electronic coupling parameters,$V_{AB}$, were found to be $0.188$ eV, $0.196$ eV, and $0.102$ eV respectively for hematite, goethite, and annite. While similar bonding topologies pertain, the underlying basis for the differences is the subtle differences in local structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Robust ab initio predictions for dimensionless ratios of 𝐸⁢2 and radius observables. II. Estimation of 𝐸⁢2 transition strengths by calibration to the charge radius

Converged results for 𝐸⁢2 observables are notoriously challenging to obtain in ab initio no-core configuration interaction approaches. Matrix elements of the 𝐸⁢2 operator are sensitive to the large-distance tails of the nuclear wave function, which converge slowly in an oscillator basis expansion. Similar convergence challenges beset ab initio prediction of the nuclear charge radius. However, we exploit systematic correlations between the calculated 𝐸⁢2 and radius observables to yield meaningful predictions for relations among these observables. In particular, we examine ab initio predictions for dimensionless ratios of the form 𝐵⁡(𝐸⁢2)/(𝑒 2 ⁢𝑟 4 ) for nuclei throughout the 𝑝 shell. Finally, meaningful predictions for 𝐸⁢2 transition strengths may then be made by calibrating to the ground-state charge radius if experimentally known.

ab initio calculations↗
DOE OSTI2023

Search for leptonic charge asymmetry in $t\overline{t}W$ production in final states with three leptons at $\sqrt{s}$ = 13 TeV

A search for the leptonic charge asymmetry (${A}_{c}^{\ell}$) of top-quark-antiquark pair production in association with a $W$ boson ($t\overline{t}W$) is presented. The search is performed using final states with exactly three charged light leptons (electrons or muons) and is based on $\sqrt{s}$= 13 TeV proton-proton collision data collected with the ATLAS detector at the Large Hadron Collider at CERN during the years 2015–2018, corresponding to an integrated luminosity of 139 fb –1 . A profile-likelihood fit to the event yields in multiple regions corresponding to positive and negative differences between the pseudorapidities of the charged leptons from top-quark and top-antiquark decays is used to extract the charge asymmetry. At reconstruction level, the asymmetry is found to be –0.12 ± 0.14 (stat.) ± 0.05 (syst.). An unfolding procedure is applied to convert the result at reconstruction level into a charge-asymmetry value in a fiducial volume at particle level with the result of –0.11 ± 0.17 (stat.) ± 0.05 (syst.). The Standard Model expectations for these two observables are calculated using Monte Carlo simulations with next-to-leading-order plus parton shower precision in quantum chromodynamics and including next-to-leading-order electroweak corrections. They are ${–0.084}_{–0.003}^{+0.005}$ (scale) ± 0.006 (MC stat.) and ${–0.063}_{–0.004}^{+0.007}$ (scale) ± 0.004 (MC stat.) respectively, and in agreement with the measurements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Investigating strangeness enhancement with multiplicity in pp collisions using angular correlations

A study of strange hadron production associated with hard scattering processes and with the underlying event is conducted to investigate the origin of the enhanced production of strange hadrons in small collision systems characterised by large charged-particle multiplicities. For this purpose, the production of the single-strange meson ${\textrm{K}}_{\textrm{S}}^0$ and the double-strange baryon Ξ ± is measured, in each event, in the azimuthal direction of the highest-p T particle (“trigger” particle), related to hard scattering processes, and in the direction transverse to it in azimuth, associated with the underlying event, in pp collisions at $\sqrt{s}$ = 5.02 TeV and $\sqrt{s}$ = 13 TeV using the ALICE detector at the LHC. The per-trigger yields of ${\textrm{K}}_{\textrm{S}}^0$ and Ξ ± are dominated by the transverse-to-leading production (i.e., in the direction transverse to the trigger particle), whose contribution relative to the toward-leading production is observed to increase with the event charged-particle multiplicity. The transverse-to-leading and the toward-leading Ξ ± /${\textrm{K}}_{\textrm{S}}^0$ yield ratios increase with the multiplicity of charged particles, suggesting that strangeness enhancement with multiplicity is associated with both hard scattering processes and the underlying event. The relative production of Ξ ± with respect to ${\textrm{K}}_{\textrm{S}}^0$ is higher in transverse-to-leading processes over the whole multiplicity interval covered by the measurement. The ${\textrm{K}}_{\textrm{S}}^0$ and Ξ ± per-trigger yields and yield ratios are compared with predictions of three different phenomenological models, namely Pythia8.2 with the Monash tune, Pythia8.2 with ropes and EPOS LHC. The comparison shows that none of them can quantitatively describe either the transverse-to-leading or the toward-leading yields of ${\textrm{K}}_{\textrm{S}}^0$ and Ξ ± .

hadron-hadron scattering↗
DOE OSTI2022

Forward rapidity $J/ψ$ production as a function of charged-particle multiplicity in pp collisions at $\sqrt{s}$ = 5.02 and 13 TeV

The production of J/ψ is measured as a function of charged-particle multiplicity at forward rapidity in proton-proton (pp) collisions at center-of-mass energies $\sqrt{s}$ = 5.02 and 13 TeV. The J/ψ mesons are reconstructed via their decay into dimuons in the rapidity interval (2.5 < y < 4.0), whereas the charged-particle multiplicity density (dN ch /dη) is measured at midrapidity (|η| <; 1). The production rate as a function of multiplicity is reported as the ratio of the yield in a given multiplicity interval to the multiplicity-integrated one. This observable shows a linear increase with charged-particle multiplicity normalized to the corresponding average value for inelastic events (dN ch /dη/$\langle$dN ch /dη$\rangle$), at both the colliding energies. Measurements are compared with available ALICE results at midrapidity and theoretical model calculations. First measurement of the mean transverse momentum ($\langle$p T $\rangle$) of J/ψ in pp collisions exhibits an increasing trend as a function of dN ch /dη/$\langle$dN ch /dη$\rangle$ showing a saturation towards high charged-particle multiplicities.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Observation of abnormal suppression of f 0 (980) production in p–Pb collisions at $\sqrt{s_{NN}}$= 5.02 TeV

The dependence of f 0 (980) production on the final-state charged-particle multiplicity in p–Pb collisions at $\sqrt{s_{NN}}$= 5.02 TeV is reported. The production of f 0 (980) is measured with the ALICE detector via the f 0 (980) → π + π – decay channel in a midrapidity region of –0.5 < y < 0. Particle yield ratios of f 0 (980) to π and K*(892) 0 are found to be decreasing with increasing charged-particle multiplicity. The magnitude of the suppression of the f 0 (980)/π and f 0 (980)/K*(892) 0 yield ratios is found to be dependent on the transverse momentum p T , suggesting different mechanisms responsible for the measured effects. Furthermore, the nuclear modification factor Q pPb of f 0 (980) is measured in various multiplicity ranges. The Q pPb shows a strong suppression of the f 0 (980) production in the p T region up to about 4 GeV/c. The results on the particle yield ratios and Q pPb for f 0 (980) may help to understand the late hadronic phase in p–Pb collisions and the nature of the internal structure of f 0 (980) particle.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Simultaneous Energy Generation and Flow Enhancement (Electroslippage Effect) in Polyelectrolyte Brush Functionalized Nanochannels

Energy generation through nanofluidics is a topic of great nanotechnological relevance. In this work, we conduct all-atom molecular dynamics (MD) simulations of the transport of water and ions in a pressure-driven flow in nanochannels grafted with charged polyelectrolyte (PE) brushes and discover the possibility of simultaneous electrokinetic energy generation and flow enhancement (henceforth denoted as the electroslippage effect). Such PE-brush-functionalized nanochannels have been recently shown to demonstrate an overscreening (OS) effect (characterized by the presence of a greater number of screening counterions within the PE brush layer than needed to screen the PE brush charges), a consequent presence of excess coions within the PE brush-free bulk, and a coion-driven electroosmotic (EOS) transport in the presence of small to moderate applied axial electric fields. Here, however, we find that the streaming current, which represents the current generated by the flow-driven downstream advection of the charge imbalance present within the electric double layer (EDL) that screen the PE brush charges, is governed by the migration of the counterions. This stems from the fact that the highest contribution to the overall streaming current arises from the region near the PE brush-water interface (where there is an excess of counterions), while the brush-free bulk yields a hitherto unreported, but small, coion-dictated streaming current. This downstream advection of the charge imbalance (and the resultant counterion-driven streaming current) eventually leads to the development of an electric field (streaming electric field) in the direction that is opposite to the direction of the counterion-driven streaming current. The streaming current and the streaming electric field interact to generate the electrokinetic energy. Equally importantly, this streaming electric field induces an EOS transport, which becomes coion-driven, due to the presence of excess coions in the brush-free bulk. For the case of nanochannels grafted with negatively charged PE brushes, the streaming electric field will be in a direction that is opposite to the pressure-driven transport, and hence the coion (or anion) driven EOS flow, will be in the same direction as the pressure-driven transport. On the other hand, for the case of nanochannels grafted with positively charged PE brushes, the streaming electric field will be in the same direction as the pressure-driven flow, and hence the coion (or cation) driven EOS flow, will again be in the same direction as the pressure-driven flow. Therefore, whenever there occurs the presence of the OS and the resulting coion-driven EOS transport in PE brush grafted nanochannels, regardless of the sign of the charges of the PE brushes, this EOS transport will always aid the pressure-driven transport and will cause the most fascinating increase in the net volume flow rate across the nanochannel cross section, which is the electroslippage effect.

overscreening↗
DOE OSTI2020

High‐Performance Fluorinated Fused‐Ring Electron Acceptor with 3D Stacking and Exciton/Charge Transport

Abstract A new fluorinated electron acceptor (FINIC) based on 6,6,12,12‐tetrakis(3‐fluoro‐4‐hexylphenyl)‐indacenobis(dithieno[3,2‐ b ;2 ′ ,3 ′ ‐ d ]thiophene) as the electron‐donating central core and 5,6‐difluoro‐3‐(1,1‐dicyanomethylene)‐1‐indanone as the electron‐deficient end groups is rationally designed and synthesized. FINIC shows similar absorption profile in dilute solution to the nonfluorinated analogue INIC. However, compared with INIC, FINIC film shows red‐shifted absorption, down‐shifted frontier molecular orbital energy levels, enhanced crystallinity, and more ordered molecular packing. Single‐crystal structure data show that FINIC molecules pack into closer 3D “network” motif through H‐bonding and π–π interaction, while INIC molecules pack into incompact “honeycomb” motif through only π–π stacking. Theoretical calculations reveal that FINIC has stronger electronic coupling and more molecular interactions than INIC. FINIC has higher electron mobilities in both horizontal and vertical directions than INIC. Moreover, FINIC and INIC support efficient 3D exciton transport. PBD‐SF/FINIC blend has a larger driving force for exciton splitting, more efficient charge transfer and photoinduced charge generation. Finally, the organic solar cells based on PBD‐SF/FINIC blend yield power conversion efficiency of 14.0%, far exceeding that of the PBD‐SF/INIC‐based devices (5.1%).

Dai, Shuixing↗
DOE OSTI2024

Ultrafast formation of topological defects in a two-dimensional charge density wave

Topological defects play a central role in dynamical systems undergoing a non-adiabatic transition. In solids, topological defects as a result of femtosecond laser excitation have attracted increasing interest not only because they are key to understanding phase transitions but also because they can generate a variety of hidden orders that are not accessible in thermal equilibrium. Despite the common occurrence of these defects in a non-equilibrium system, the fundamental limit on how fast they can emerge in solids and the generic pathway for defect creation at such fast timescales have remained open questions. Here we apply ultrafast electron diffraction to study the reciprocal-space signatures of transient defects in a two-dimensional charge density wave, where simultaneous measurements of both defect and phonon dynamics yield a microscopic view of defect formation in the femtosecond regime. We find that one-dimensional domain walls are generated well within 1 ps following photoexcitation, during which the defect growth is not dictated by the amplitude of the order parameter but is mediated by a non-thermal population of longitudinal optical phonons. In conclusion, our work provides a framework for the ultrafast engineering of topological defects that are coupled to specific collective modes, which will prove useful for the dynamical control of non-equilibrium phases in correlated materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗