Search NASA⌕ Search

SEARCH · Search NASA

Results for “colloidal systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Controller Design for the ST7 Disturbance Reduction System

The Space Technology 7 experiment will perform an on-orbit system-level validation of two specific Disturbance Reduction System technologies: a gravitational reference sensor employing a free-floating test mass and a set of micro-Newton colloidal thrusters. The Disturbance Reduction System is designed to maintain a spacecraft's position with respect to the free-floating test mass to less than 10 nm/ square root of Hz, over the frequency range 10(exp -3) Hz to 10(exp -2) Hz. This paper presents the design and analysis of the coupled drag-free and attitude control system that closes the loop between the gravitational reference sensor and the micro-Newton thrusters while incorporating star tracker data at low frequencies. The effects of actuation and measurement noise and disturbances on the spacecraft and test masses are evaluated in a seven-degree-of-freedom planar model incorporating two translational and one rotational degrees of freedom for the spacecraft and two translational degrees of freedom for each test mass.

Maghami, Peiman↗

Corrosion reduction of aluminum alloys in flowing high-temperature water

Report describes a technique for reducing the corrosion rate of aluminum by adding colloidal substances in a closed-loop system. Experimental work shows that the addition of graphite and colloidal hydrated aluminum oxide significantly reduces the corrosion rate in flowing high-temperature water.

Draley, J. E.↗

Biaxial ferromagnetic liquid crystal colloids

Significance We introduce a soft-matter system with fluidity coexisting with long-range biaxial and ferromagnetic ordering of anisotropic molecular and magnetic colloidal building blocks. The facile polar switching of this complex fluid promises technological applications and rich physical behavior arising from the properties of solid magnetic nanoparticles and their long-range ordering prompted by interactions with the host medium.

Liu, Qingkun↗

Colloid-Facilitated Transport of 137 Cs in Fracture-Fill Material. Experiments and Modeling

In this study, we demonstrate how a combination of batch sorption/desorption experiments and column transport experiments were used to effectively parameterize a model describing the colloid-facilitated transport of Cs in the Grimsel granodiorite/FFM system. Cs partition coefficient estimates onto both the colloids and the stationary media obtained from the batch experiments were used as initial estimates of partition coefficients in the column experiments, and then the column experiment results were used to obtain refined estimates of the number of different sorption sites and the adsorption and desorption rate constants of the sites. The desorption portion of the column breakthrough curves highlighted the importance of accounting for adsorption-desorption hysteresis (or a very nonlinear adsorption isotherm) of the Cs on the FFM in the model, and this portion of the breakthrough curves also dictated that there be at least two different types of sorption sites on the FFM. In the end, the two-site model parameters estimated from the column experiments provided excellent matches to the batch adsorption/desorption data, which provided a measure of assurance in the validity of the model.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Entropy production in model colloidal suspensions under shear via the fluctuation theorem

Dissipative systems often exhibit novel and unexpected properties. This is, for instance, the case of simple liquids, which, when subjected to shear and after reaching a steady state, can exhibit a negative entropy production over finite length scales and timescales. This result, among others, is captured by nonequilibrium relations known as fluctuation theorems. Using nonequilibrium molecular dynamics simulations, we examine how, by fine-tuning the properties of the components of a complex fluid, we can steer the nonequilibrium response of the fluid. More specifically, we show how we control the nonequilibrium probability distribution for the shear stress and, in turn, how often states with a negative entropy production can occur. To achieve this, we start by characterizing how the size for the liquid matrix impacts the probability of observing negative entropy states, as well as the timescale over which these can be observed. We then measure how the addition of larger particles to this liquid matrix, i.e., simulating a model colloidal suspension, results in an increase in the occurrence of such states. As a result, this suggests how modifications in the composition of the mixture and in the properties of its components lead to an increase in the probability of observing states of negative entropy production and, thus, for the system to run in reverse.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermodynamic stability versus kinetic accessibility: Pareto fronts for programmable self-assembly

A challenge in designing self-assembling building blocks is to ensure the target state is both thermodynamically stable and kinetically accessible. These two objectives are known to be typically in competition, but it is not known how to simultaneously optimize them. We consider this problem through the lens of multi-objective optimization theory: we develop a genetic algorithm to compute the Pareto fronts characterizing the tradeoff between equilibrium probability and folding rate, for a model system of small polymers of colloids with tunable short-ranged interaction energies. We use a coarse-grained model for the particles' dynamics that allows us to efficiently search over parameters, for systems small enough to be enumerated. For most target states there is a tradeoff when the number of types of particles is small, with medium-weak bonds favouring fast folding, and strong bonds favouring high equilibrium probability. Additionally, the tradeoff disappears when the number of particle types reaches a value m *, that is usually much less than the total number of particles. This general approach of computing Pareto fronts allows one to identify the minimum number of design parameters to avoid a thermodynamic–kinetic tradeoff. However, we argue, by contrasting our coarse-grained model's predictions with those of Brownian dynamics simulations, that particles with short-ranged isotropic interactions should generically have a tradeoff, and avoiding it in larger systems will require orientation-dependent interactions.

36 MATERIALS SCIENCE↗

Image method for induced surface charge from many-body system of dielectric spheres

Charged dielectric spheres embedded in a dielectric medium provide the simplest model for many-body systems of polarizable ions and charged colloidal particles. We provide a multiple scattering formulation for the total electrostatic energy for such systems and demonstrate that the polarization energy can be rapidly evaluated by an image method that generalizes the image methods for conducting spheres. Furthermore, individual contributions to the total electrostatic energy are ordered according to the number of polarized surfaces involved, and each additional surface polarization reduces the energy by a factor of $(a/R)^3ϵ$, where $a$ is the sphere radius, $R$ the average inter-sphere separation, and $ϵ$ the relevant dielectric mismatch at the interface. Explicit expressions are provided for both the energy and the forces acting on individual spheres, which can be readily implemented in Monte Carlo and molecular dynamics simulations of polarizable charged spheres, thereby avoiding costly computational techniques that introduce a surface charge distribution that requires numerical solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A note on the hard-sphere fluid dynamic universality class

In a recent letter Ramirez-Gonzalez et al. propose the existence of a dynamic universality class associated with generic soft-sphere systems whose static and dynamic properties can be mapped onto those of the hard-sphere fluid using a state and interaction dependent effective hard-sphere diameter, and thus are functions of a single variable, namely the effective packing fraction. The concept is useful for understanding the dynamics of systems from atomic fluids to colloidal suspensions. It is worth noting however that these ideas have a fairly long history, that there may be better criteria than the one adopted by the authors for establishing a connection between the system of interest and the dynamically equivalent hard-sphere one, and that there are also some known limitations.

Bastea, Sorin↗

Entropic formation of a thermodynamically stable colloidal quasicrystal with negligible phason strain

Quasicrystals have been discovered in a variety of materials ranging from metals to polymers. Yet, why and how they form is incompletely understood. In situ transmission electron microscopy of alloy quasicrystal formation in metals suggests an error-and-repair mechanism, whereby quasiperiodic crystals grow imperfectly with phason strain present, and only perfect themselves later into a high-quality quasicrystal with negligible phason strain. The growth mechanism has not been investigated for other types of quasicrystals, such as dendrimeric, polymeric, or colloidal quasicrystals. Soft-matter quasicrystals typically result from entropic, rather than energetic, interactions, and are not usually grown (either in laboratories or in silico) into large-volume quasicrystals. Consequently, it is unknown whether soft-matter quasicrystals form with the high degree of structural quality found in metal alloy quasicrystals. Here, we investigate the entropically driven growth of colloidal dodecagonal quasicrystals (DQCs) via computer simulation of systems of hard tetrahedra, which are simple models for anisotropic colloidal particles that form a quasicrystal. Using a pattern recognition algorithm applied to particle trajectories during DQC growth, we analyze phason strain to follow the evolution of quasiperiodic order. As in alloys, we observe high structural quality; DQCs with low phason strain crystallize directly from the melt and only require minimal further reduction of phason strain. Finally, we also observe transformation from a denser approximant to the DQC via continuous phason strain relaxation. Our results demonstrate that soft-matter quasicrystals dominated by entropy can be thermodynamically stable and grown with high structural quality––just like their alloy quasicrystal counterparts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Scale-free, programmable design of morphable chain loops of kilobots and colloidal motors

Micron-scale robots require systems that can morph into arbitrary target configurations controlled by external agents such as heat, light, electricity, and chemical environment. Achieving this behavior using conventional approaches is challenging because the available materials at these scales are not programmable like their macroscopic counterparts. To overcome this challenge, we propose a design strategy to make a robotic machine that is both programmable and compatible with colloidal-scale physics. Our strategy uses motors in the form of active colloidal particles that constantly propel forward. We sequence these motors end-to-end in a closed chain forming a two-dimensional loop that folds under its mechanical constraints. We encode the target loop shape and its motion by regulating six design parameters, each scale-invariant and achievable at the colloidal scale. We demonstrate the plausibility of our design strategy using centimeter-scale robots called kilobots . We use Brownian dynamics simulation to explore the large design space beyond that possible with kilobots, and present an analytical theory to aid the design process. Multiple loops can also be fused together to achieve several complex shapes and robotic behaviors, demonstrated by folding a letter shape “M,” a dynamic gripper , and a dynamic pacman . The material-agnostic, scale-free, and programmable nature of our design enables building a variety of reconfigurable and autonomous robots at both colloidal scales and macroscales.

36 MATERIALS SCIENCE↗

Improved in situ spring constant calibration for colloidal probe atomic force microscopy

In colloidal probe atomic force microscopy (AFM) surface forces cannot be measured without an accurate determination of the cantilever spring constant. The effective spring constant k depends upon the cantilever geometry and therefore should be measured in situ; additionally, k may be coupled to other measurement parameters. For example, colloidal probe AFM is frequently used to measure the slip length b at solid/liquid boundaries by comparing the measured hydrodynamic force with Vinogradova slip theory (V-theory). However, in this measurement k and b are coupled, hence, b cannot be accurately determined without knowing k to high precision. In this paper, a new in situ spring constant calibration method based upon the residuals, namely, the difference between experimental force-distance data and V-theory is presented and contrasted with two other popular spring constant determination methods. In this residuals calibration method, V-theory is fitted to the experimental force-distance data for a range of systematically varied spring constants where the only adjustable parameter in V-theory is the slip length b. The optimal spring constant k is that value where the residuals are symmetrically displaced about zero for all colloidal probe separations. This residual spring constant calibration method is demonstrated by studying three different liquids (n-decanol, n-hexadecane, and n-octane) and two different silane coated colloidal probe-silicon wafer systems (n-hexadecyltrichlorosilane and n-dodecyltrichlorosilane).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Used Fuel Disposal in Crystalline Rocks. FY15 Progress Report

The objective of the Crystalline Disposal R&D Work Package is to advance our understanding of long-term disposal of used fuel in crystalline rocks and to develop necessary experimental and computational capabilities to evaluate various disposal concepts in such media. Chapter headings are as follows: Fuel matrix degradation model and its integration with performance assessments, Investigation of thermal effects on the chemical behavior of clays, Investigation of uranium diffusion and retardation in bentonite, Long-term diffusion of U(VI) in bentonite: dependence on density, Sorption and desorption of plutonium by bentonite, Dissolution of plutonium intrinsic colloids in the presence of clay and as a function of temperature, Laboratory investigation of colloid-facilitated transport of cesium by bentonite colloids in a crystalline rock system, Development and demonstration of discrete fracture network model, Fracture continuum model and its comparison with discrete fracture network model.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Disturbance Reduction Control Design for the ST7 Flight Validation Experiment

The Space Technology 7 experiment will perform an on-orbit system-level validation of two specific Disturbance Reduction System technologies: a gravitational reference sensor employing a free-floating test mass, and a set of micro-Newton colloidal thrusters. The ST7 Disturbance Reduction System is designed to maintain the spacecraft's position with respect to a free-floating test mass to less than 10 nm/Hz, over the frequency range of 1 to 30 mHz. This paper presents the design and analysis of the coupled, drag-free and attitude control systems that close the loop between the gravitational reference sensor and the micro-Newton thrusters, while incorporating star tracker data at low frequencies. A full 18 degree-of-freedom model, which incorporates rigid-body models of the spacecraft and two test masses, is used to evaluate the effects of actuation and measurement noise and disturbances on the performance of the drag-free system.

Maghami, P. G.↗

Gelation in Aerosols; Non-Mean-Field Aggregation and Kinetics

Nature has many examples of systems of particles suspended in a fluid phase; colloids when in a liquid, aerosols when in a gas. These systems are inherently unstable since if the particles can come together, van der Waals forces will keep them together. In this work we studied the aggregation kinetics of particulate systems, most often aerosols. The emphasis of our work was to study dense systems and systems that gel since previous work had not considered these. Our work obtained a number of significant discoveries and results which are reported here.

Sorensen, C. M.↗

Mode Transitions for the ST7 Disturbance Reduction System Experiment

The Space Technology 7 Disturbance Reduction System experiment will perform an on-orbit system-level validation of two technologies: a gravitational reference sensor employing a free-floating test mass and a set of colloidal micronewton thrusters. The Disturbance Reduction System is designed to maintain the spacecraft s position with respect to a free floating test mass to less than 10 nm/& over the frequency range of 1 to 30 m= mi paper presents the modes that compose the Disturbance Reduction System spacecraft control as well as the strategy used to transition between modes. A high-fidelity model of the system, which incorporates rigid-body models of the spacecraft and two test masses (18 degrees of freedom), is developed and used to evaluate the performance of each mode and the efficacy of the transition strategy.

Hsu, Oscar C.↗

Surface nanostructuring by bichromatic femtosecond laser pulses through a colloidal particle array

This paper considers the surface nanostructuring of polymers and glasses by femtosecond laser pulses using an array of colloidal particles as a focusing system. We demonstrate that partial conversion of the femtosecond laser pulse energy into the second harmonic considerably reduces the surface modification threshold and the size of the resulting structural elements. At intensities above 10{sup 12} W cm{sup -2}, surface modification (ablation and swelling) occurs through free carrier generation. In this process, the second harmonic is more efficient in multiphoton ionisation, whereas the fundamental is more efficient in impact ionisation. The second harmonic is better focused by colloidal particle arrays than is the fundamental. As a result, the use of bichromatic pulses ensures a decrease in both the surface modification threshold and the size of the resulting structural elements. We discuss the optical properties of colloidal particle arrays and the ways of producing such arrays on dielectric substrates. (extreme light fields and their applications)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗