Search NASA⌕ Search

SEARCH · Search NASA

Results for “complex solids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Irradiation-induced amorphization of UO 2 films prepared by spraying-assisted combustion synthesis

Spraying-assisted combustion synthesis with uranyl nitrate – acetylacetone – 2-methoxyethanol solutions was used to prepare UO 2 films on an aluminum alloy substrate. The tuning of the spraying parameters and annealing temperatures allowed the preparation of UO 2 films with thicknesses varying from 10–300 nm and 5–10 nm UO 2 grain size. High-resolution electron microscopy and X-ray photoelectron spectroscopy showed that increasing the annealing temperature promotes Mg diffusion from the substrate into the films. The incorporation of Mg reduced the overall crystallinity of the films. The irradiation with Ar 2+ ions (1.7 MeV energy and a fluence of 2 × 10 16 ions/cm 2 ) did not degrade the quality of the films. However, the Mg content significantly influenced the irradiation-induced restructuring of the UO 2 films. Irradiated films with low or no Mg content exhibit high crystallinity, and the UO 2 /Al interfacial layer becomes highly porous. Films with higher Mg content are mostly amorphized after irradiation. The origin of irradiation-induced amorphization was related to the formation of Mg y U 1-y O 2±x solid solutions. Chemically complex, pore-free, and amorphous Mg-Al-O film/substrate interfacial layers enable continuous Mg diffusion during irradiation. As a result, the gradual increase in Mg amounts triggers irradiation-induced precipitation of a crystalline MgO-rich phase within the amorphous films.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Sulfidation of magnetite with incorporated uranium

Uranium (U) is a radionuclide of key environmental interest due its abundance by mass within radioactive waste and presence in contaminated land scenarios. Ubiquitously present iron (oxyhydr)oxide mineral phases, such as (nano)magnetite, have been identified as candidates for immobilisation of U via incorporation into the mineral structure. Studies of how biogeochemicalprocesses, such as sulfidation from the presence of sulfate-reducing bacteria, may affect iron (oxyhydr)oxides and impact radionuclide mobility are important in order to underpin geological disposal of radioactive waste and manage radioactively contaminated land. Here, this study utilised a highly controlled abiotic method for sulfidation of U(V) incorporated into nanomagnetite to determine the fate and speciation of U. Upon sulfidation, transient release of U into solution occurred (~8.6 % total U) for up to 3 days, despite the highly reducing conditions. As the system evolved, lepidocrocite was observed to form over a period of days to weeks. After 10 months, XAS and geochemical data showed all U was partitioned to the solid phase, as both nanoparticulate uraninite (U(IV)O2) and a percentage of retained U(V). Further EXAFS analysis showed incorporation of the residual U(V) fraction into an iron (oxyhydr)oxide mineral phase, likely nanomagnetite or lepidocrocite. Overall, these results provide new insights into the stability of U(V) incorporated iron (oxyhydr)oxides during sulfidation, confirming the longer term retention of U in the solid phase under complex, environmentally relevant conditions.

Townsend, Luke↗

In situ feature analysis for large-scale multiphase flow simulations

The study of multiphase flow is essential for designing chemical reactors such as fluidized bed reactors (FBR), as a detailed understanding of hydrodynamics is critical for optimizing reactor performance and stability. An FBR allows scientists to conduct different types of chemical reactions involving multiphase materials, especially interaction between gas and solids. During such complex chemical processes, the formation of void regions in the reactor, generally termed as bubbles, is an important phenomenon. The study of these bubbles has a deep implication in predicting the reactor’s overall efficiency. But physical experiments needed to understand bubble dynamics are costly and non-trivial due to the technical difficulties involved and harsh working conditions of the reactors. Therefore, to study such chemical processes and bubble dynamics, a state-of-the-art computational simulation MFIX-Exa is being developed. Despite the proven accuracy of MFIX-Exa in modeling bubbling phenomena, the large-scale output data prohibits the use of traditional post hoc analysis capabilities in both storage and I/O time. Herein, to address these issues and allow the application scientists to explore the bubble dynamics in an efficient and timely manner, we have developed an end-to-end analytics pipeline that enables in situ detection of bubbles, followed by a flexible post hoc visual exploration methodology of bubble dynamics. The proposed method enables interactive analysis of bubbles, along with quantification of several bubble characteristics, enabling experts to understand the bubble interactions in detail. Positive feedback from the experts has indicated the efficacy of the proposed approach for exploring bubble dynamics in very-large-scale multiphase flow simulations.

97 MATHEMATICS AND COMPUTING↗

Low-compressibility and hard material carbon nitride imide C{sub 2}N{sub 2}(NH): First principles calculations

First principles calculations are performed to investigate the structural, mechanical, and electronic properties of C{sub 2}N{sub 2}(NH). Our calculated lattice parameters are in good agreement with the experimental data and previous theoretical values. Orthorhombic C{sub 2}N{sub 2}(NH) phase is found to be mechanically stable at an ambient pressure. Based on the calculated bulk modulus and shear modulus of polycrystalline aggregate, C{sub 2}N{sub 2}(NH) can be regarded as a potential candidate of ultra-incompressible and hard material. Furthermore, the elastic anisotropy and Debye temperatures are also discussed by investigating the elastic constants and moduli. Density of states and electronic localization function analysis show that the strong C-N covalent bond in CN{sub 4} tetrahedron is the main driving force for the high bulk and shear moduli as well as small Poisson's ratio of C{sub 2}N{sub 2}(NH). -- Graphical abstract: Contours of electronic localization function (ELF) of C{sub 2}N{sub 2}(NH) on the: (0 0 1) plane (a), (1 0 0) plane (b), an ELF of Si{sub 2}N{sub 2}(NH) on the: (0 0 1) plane (c) and (1 0 0) plane (d). Display Omitted Research highlights: The structural, mechanical, and electronic properties of C{sub 2}N{sub 2}(NH) have been studied. C{sub 2}N{sub 2}(NH) is a potential low compressible and hard material. Both C{sub 2}N{sub 2}(NH) and Si{sub 2}N{sub 2}(NH) are found to have insulating feature with large band gaps. The strong covalent C-N bonding in CN{sub 4} tetrahedrons play a key role in the incompressibility and hardness of C{sub 2}N{sub 2}(NH). The chemical bonding in these two solids is a complex mixture of covalent and ionic characters.

36 MATERIALS SCIENCE↗

Bis-lactam-1,10-phenanthroline (BLPhen), a New Type of Preorganized Mixed N,O-Donor Ligand That Separates Am(III) over Eu(III) with Exceptionally High Efficiency

Here, we report a new family of preorganized bislactam- 1,10-phenanthroline (BLPhen) complexants that possess both hard and soft donor atoms within a convergent cavity and show unprecedented extraction strength for the trivalent fblock metal ions. BLPhen ligands with saturated and unsaturated δ-lactam rings have notable differences in their affinity and selectivity for Am(III) over Eu(III), with the latter being the most selective mixed N,O-donor extractant of Am(III) reported to date. Saturated BLPhen was crystallized with five Ln(III) nitrates to form charge-neutral 1:1 complexes in the solid state. DFT calculations further elaborate on the variety of effects that dictate the performance of these preorganized compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reaction of U-VI with titanium-substituted magnetite: Influence of Ti on U-IV speciation

Reduction of hexavalent uranium (UVI) to less soluble tetravalent uranium (UIV) through enzymatic or abiotic redox reactions has the potential to alter U mobility in subsurface environments. As a ubiquitous natural mineral, magnetite (Fe3O4) is of interest because of its ability to act as a rechargeable reductant for UVI. Natural magnetites are often impure with titanium, and structural Fe3+ replacement by TiIV yields a proportional increase in the relative Fe2+ content in the metal sublattice to maintain bulk charge neutrality. In the absence of oxidation, the Ti content sets the initial bulk Fe2+/Fe3+ ratio (R). Here, we demonstrate that Ti-doped magnetites (Fe3 xTixO4) reduce UVI to UIV. The UVI-Fe2+ redox reactivity was found to be controlled directly by R, but was otherwise independent of Ti content (xTi). However, in contrast to previous studies with pure magnetite where UVI was reduced to nanocrystalline uraninite (UO2), the presence of structural Ti (xTi = 0.25 0.53) results in the formation of UIV species that lack the bidentate U-O2-U bridges of uraninite. Extended x-ray absorption fine structure spectroscopic analysis indicated that the titanomagnetite-bound UIV phase has a novel UIV-Ti binding geometry, different from the coordination of UIV in the mineral brannerite (UIVTi2O6). The observed UIV-Ti coordination at a distance of 3.43 Å suggests a binuclear corner-sharing adsorption/incorporation UIV complex with the solid phase. Furthermore, we explored the effect of oxidation (decreasing R) and solids-to-solution ratio on the reduced UIV phase. The formation of the non-uraninite UIV-Ti phase appears to be controlled by availability of surface Ti sites, rather than R. Our work highlights a previously unrecognized role of Ti in the environmental chemistry of UIV and suggests that further work to characterize the long-term stability of UIV phases formed in the presence of Ti is warranted.

Environmental Molecular Sciences Laboratory↗

The Chp1–Tas3 core is a multifunctional platform critical for gene silencing by RITS

RNA interference (RNAi) is critical for the assembly of heterochromatin at Schizosaccharomyces pombe centromeres. Central to this process is the RNA-induced initiation of transcriptional gene silencing (RITS) complex, which physically anchors small noncoding RNAs to chromatin. RITS includes Ago1, the chromodomain protein Chp1, and Tas3, which forms a bridge between Chp1 and Ago1. Chp1 is a large protein with no recognizable domains, apart from its chromodomain. Here we describe how the structured C-terminal half of Chp1 binds the Tas3 N-terminal domain, revealing the tight association of Chp1 and Tas3. The structure also shows a PIN domain at the C-terminal tip of Chp1 that controls subtelomeric transcripts through a post-transcriptional mechanism. We suggest that the Chp1–Tas3 complex provides a solid and versatile platform to recruit both RNAi-dependent and RNAi-independent gene-silencing pathways for locus-specific regulation of heterochromatin.

59 BASIC BIOLOGICAL SCIENCES↗

Terahertz-field activation of polar skyrons

Unraveling collective modes arising from coupled degrees of freedom is crucial for understanding complex interactions in solids and developing new functionalities. Unique collective behaviors emerge when two degrees of freedom, ordered on distinct length scales, interact. Polar skyrmions, three-dimensional electric polarization textures in ferroelectric superlattices, disrupt the lattice continuity at the nanometer scale with nontrivial topology, leading to previously unexplored collective modes. Here, using terahertz-field excitation and femtosecond x-ray diffraction, we discover subterahertz collective modes, dubbed “skyrons”, which appear as swirling patterns of atomic displacements functioning as atomic-scale gearsets. The key to activating skyrons is the use of the THz field that couples primarily to skyrmion domain walls. Momentum-resolved time-domain measurements of diffuse scattering reveal an avoided crossing in the dispersion relation of skyrons. Atomistic simulations and dynamical phase-field modeling provide microscopic insights into the three-dimensional crystallographic and polarization dynamics. The amplitude and dispersion of skyrons are demonstrated to be controlled by sample temperature and electric-field bias. The discovery of skyrons and their coupling with terahertz fields opens avenues for ultrafast control of topological polar structures.

ferroelectrics↗

Photoelectron spectroscopy of wet and gaseous samples through graphene membranes

Photoelectron spectroscopy (PES) and microscopy are highly important for exploring morphologically and chemically complex liquid–gas, solid–liquid and solid–gas interfaces under realistic conditions, but the very small electron mean free path inside dense media imposes serious experimental challenges. Currently, near ambient pressure PES is conducted using dexterously designed electron energy analyzers coupled with differentially pumped electron lenses which make it possible to conduct PES measurements at a few hPa. This report proposes an alternative ambient pressure approach that can be applied to a broad class of samples and be implemented in conventional PES instruments. It uses ultrathin electron transparent but molecular impermeable membranes to isolate the high pressure sample environment from the high vacuum PES detection system. We show that the separating graphene membrane windows are both mechanically robust and sufficiently transparent for electrons in a wide energy range to allow soft X-ray PES of liquid and gaseous water. The performed proof-of-principle experiments confirm the possibility to probe vacuum-incompatible toxic or reactive samples placed inside such hermetic, gas flow or fluidic environmental cells.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Homoleptic U(III) and U(IV) amidate complexes

The syntheses of the first homoleptic U(III) and U(IV) amidate complexes are described here. These can be interconverted by chemical reduction/oxidation, showing an unusual change in coordination number from four in the U(III) complex to eight in the U(IV) complex in the solid state structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The chemical and physical properties of tetravalent lanthanides: Pr, Nd, Tb, and Dy

The fundamental redox chemistry and valence electronic structure of the lanthanides in molecular complexes and extended solids continues to be a fertile area of research. The contemporary understanding of the accessible oxidation states of the lanthanide elements and the variability in their electronic structure is the result of several paradigm shifts. While the lanthanide elements have already found widespread use in technical and consumer applications, the continued reevaluation of basic redox properties is a central chemical concern to establish a more complete description of periodic properties. This fundamental understanding of valence electronic structure as it is derived from oxidation state and coordination environment is essential for the continued development of lanthanides in quantum information science and quantum materials research. This review presents the chemical and physical properties of tetravalent lanthanide ions in extended solids and molecules with a focus on the elements apart from cerium: praseodymium, neodymium, terbium, and dysprosium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Perspective: Explicitly correlated electronic structure theory for complex systems

The explicitly correlated approach is one of the most important breakthroughs in ab initio electronic structure theory, providing arguably the most compact, accurate, and efficient ansatz for describing the correlated motion of electrons. Since Hylleraas first used an explicitly correlated wave function for the He atom in 1929, numerous attempts have been made to tackle the significant challenges involved in constructing practical explicitly correlated methods that are applicable to larger systems. These include identifying suitable mathematical forms of a correlated wave function and an efficient evaluation of many-electron integrals. R12 theory, which employs the resolution of the identity approximation, emerged in 1985, followed by the introduction of novel correlation factors and wave function ansätze, leading to the establishment of F12 theory in the 2000s. Rapid progress in recent years has significantly extended the application range of explicitly correlated theory, offering the potential of an accurate wave-function treatment of complex systems such as photosystems and semiconductors. In conclusion, this perspective surveys explicitly correlated electronic structure theory, with an emphasis on recent stochastic and deterministic approaches that hold significant promise for applications to large and complex systems including solids.

74 ATOMIC AND MOLECULAR PHYSICS↗

Efficient construction of generalized master equation memory kernels for multi-state systems from nonadiabatic quantum-classical dynamics

Techniques derived from the generalized quantum master equation (GQME) framework have provided the basis for elucidating energy and charge transfer in systems ranging from molecular solids to photosynthetic complexes. Recently, the nonperturbative combination of the GQME with quantum-classical methods has resulted in approaches whose accuracy and efficiency exceed those of the original quantumclassical schemes while offering significant accuracy improvements over perturbative expansions of the GQME. In this work, we show that, while the non-Markovian memory kernel required to propagate the GQME scales quartically with the number of subsystem states, the number of trajectories required scales at most quadratically when using quantum-classical methods to construct the kernel. We then present an algorithm that allows further acceleration of the quantum-classical GQME by offering a way to selectively sample the kernel matrix elements that are most important to the process of interest. We demonstrate the utility of these advances by applying the combination of Ehrenfest mean field theory with the GQME (MF-GQME) to models of the Fenna-Matthews-Olson (FMO) complex and the light harvesting complex II (LHCII), with 7 and 14 states, respectively. This allows us to show that the MF-GQME is able to accurately capture all the relevant dynamical time scales in LHCII: the initial nonequilibrium population transfer on the femtosecond time scale, the steady state-type trapping on the picosecond time scale, and the long time population relaxation. Remarkably, all of these physical effects spanning tens of picoseconds can be encoded in a memory kernel that decays only after ~65 fs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-Pressure Apparatus for Monitoring Solid–Liquid Phase Transitions

This work presents a new technique for observing the solid–liquid phase transformations in complex diesel fuel blends and diesel surrogates under high-pressure conditions intended to simulate those occurring in vehicle fuel injectors. A high-pressure apparatus based on a visual identification of freezing and thawing has been designed and built to monitor phase behavior and determine the crystallization temperature of complex fuels to predict wax precipitation. The proposed methodology was validated using pure substances—n-hexadecane (C16H34), cyclohexane (C6H12), and a binary cyclohexane/n-hexadecane mixture—all of which have been well-characterized previously. The crystallization temperatures of these compounds were measured from atmospheric pressure to 400 MPa for temperatures varying from 290 to 363 K and compared to those reported in the literature. The standard error of the estimated temperatures, based on a given pressure, between the experimental data obtained in this work was compared to data in the literature from Domanska et al. This methodology is being extended to investigate the properties of more complex fuel mixtures.

High-Pressure, phase change, diesel, solidificatio↗

Prediction of hemiwicking dynamics in micropillar arrays

Dynamic hemiwicking behavior is observable in both nature and a wide range of industrial applications ranging from biomedical devices to thermal management. We present a semi-analytical modeling framework (without empirical fitting coefficients) to predict transient capillary-driven hemiwicking behavior of a liquid through a nano/microstructured surface, specifically a micropillar array. In our model framework, the liquid domain is discretized into micropillar unit cells to enable the time marching of the hemiwicking front. A simplified linear pressure drop is assumed along the hemiwicking length such that the local meniscus curvature, contact angle, and effective liquid height are determined at each time step in our transient model. This semi-analytical model is validated with experimental data from our own experiments and from published literature for different fluids. Our model predicts hemiwicking dynamics with <20% error over a broad range of micropillar geometries with height-to-pitch ratio ranging between ≈0.34 and 6.7 and diameter-to-pitch ratio in the range of ≈0.25–0.7 and without any fitting parameters. For lower diameter-to-pitch ratio data points related to sparse micropillar array arrangements, we suggest modifications to the semi-analytical model. This work sheds light on complex and dynamic solid–liquid–vapor interfacial interactions which could serve as a guide for the design of textured surfaces for wicking enhancement in multi-phase thermal and mass transport technologies and applications.

Mechanics↗

Effect of local chemical order on the irradiation-induced defect evolution in CrCoNi medium-entropy alloy

High- (and medium-) entropy alloys have emerged as potentially suitable structural materials for nuclear applications, particularly as they appear to show promising irradiation resistance. Recent studies have provided evidence of the presence of local chemical order (LCO) as a salient feature of these complex concentrated solid-solution alloys. However, the influence of such LCO on their irradiation response has remained uncertain thus far. Here, in this work, we combine ion irradiation experiments with large-scale atomistic simulations to reveal that the presence of chemical short-range order, developed as an early stage of LCO, slows down the formation and evolution of point defects in the equiatomic medium-entropy alloy CrCoNi during irradiation. In particular, the irradiation-induced vacancies and interstitials exhibit a smaller difference in their mobility, arising from a stronger effect of LCO in localizing interstitial diffusion. This effect promotes their recombination as the LCO serves to tune the migration energy barriers of these point defects, thereby delaying the initiation of damage. These findings imply that local chemical ordering may provide a variable in the design space to enhance the resistance of multi-principal element alloys to irradiation damage.

36 MATERIALS SCIENCE↗

Near-surface modification of defective KTaO 3 by ionizing ion irradiation

The synergistic effect of nuclear (S n ) and electronic (S e ) energy loss observed in some ABO 3 perovskites has attracted considerable attention due to the real possibility to modify various near-surface properties, such as the electronic and optical properties, by patterning ion tracks in the defective near-surface regions. In this study, we show that low-energy ion-induced disordering in conjunction with ionizing ion irradiation (18 MeV Si, 21 MeV Ni and 91.6 MeV Xe) is a promising approach for tailoring ion tracks in the near-surface of defective KTaO 3 . Experimental characterization and computer simulations reveal that the size of these latent ion tracks increases with S e and level of pre-existing damage. These results further reveal that the threshold S e value (S e th ) for track creation increases with decreasing pre-damage level. The values of S e th increase from 5.02 keV nm -1 , for a pre-existing fractional disorder of 0.53 in KTaO 3 , to 10.81 keV nm -1 for pristine KTaO 3 . Above these thresholds, amorphous latent tracks are produced due local melting and rapid quenching. Below a disorder fraction of 0.08 and S e ≤ 6.68 keV nm -1 , the synergistic effect is not active, and damage accumulation is suppressed due to a competing ionization-induced damage annealing process. These results indicate that, depending on S e and the amount of pre-existing damage, highly ionizing ions can either enhance or suppress damage accumulation in KTaO 3 , thus providing a pathway to tailoring defects states. Comprehending the conflicting roles of highly ionizing ions in defective ABO 3 oxides is vital for understanding and predictive modeling of ion-solid interactions in complex oxides, as well as for achieving control over ion track size in the near-surface of defective KTaO 3 .

36 MATERIALS SCIENCE↗