Search NASA⌕ Search

SEARCH · Search NASA

Results for “composite optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Characterization of Fluorescence Signals in Synthetic Anorthite

In-situ resource utilization (ISRU) is a key capability to enable a long term presence on the Moon and other planetary bodies. For example, efforts have been underway to develop processes to utilize the lunar regolith to produce building materials and extract useful resources. In processes that utilize the regolith directly to produce construction materials, such as in various sintering methods, characterizing the composition of the regolith is important as the composition can affect the optimal process parame-ters. In processes that involve extracting resources such as iron, oxygen, hydrogen, etc., identifying areas with higher abundance of a particular resource will be critical since different regions of the Moon exhibit differing regolith composition. To this end, Ra-man is one technique that can rapidly characterize the mineralogy of rock samples. This technique has al-ready been deployed on Mars to detect various miner-als including olivine, carbonates, phosphates, etc. Besides characterizing the mineralogy, Raman spectra often contain unwanted fluorescence signals that can mask Raman peaks. In some cases, the fluorescence signals are narrow enough to aid in the identification of specific elements in soils. In this work, we explore fluorescence peaks in a synthetic anorthite sample, which are at the same position as Ruby fluorescence peaks attributed to chromium. These fluorescence peaks, as well as similar fluorescence peaks attributed to other elements, could have important implications for ISRU and the mining of critical resources as has been previously described.

Raman Spectroscopy↗

Biological degradation and composition of inedible sweetpotato biomass

Many challenges are presented by biological degradation in a bioregenerative Controlled Ecological Life Support System (CELSS) as envisioned by the U.S. National Aeronautics and Space Administration (NASA). In the studies conducted with biodegradative microorganism indigenous to sweetpotato fields, it was determined that a particle size of 75 microns and incubation temperature of 30 degrees C were optimal for degradation. The composition of the inedible biomass and characterization of plant nutrient solution indicated the presence of potential energy sources to drive microbial transformations of plant waste. Selected indigenous soil isolates with ligno-cellulolytic or sulfate-reducing ability were utilized in biological studies and demonstrated diversity in ability to reduce sulfate in solution and to utilize alternative carbon sources: a lignin analog--4-hydroxy, 3-methoxy cinnamic acid, cellulose, arabinose, glucose, sucrose, mannitol, galactose, ascorbic acid.

Vegetables/chemistry/metabolism↗

Hybrid Gear Preliminary Results-Application of Composites to Dynamic Mechanical Components

Composite spur gears were fabricated and then tested at NASA Glenn Research Center. The composite material served as the web of the gear between the gear teeth and a metallic hub for mounting to the torque-applying shaft. The composite web was bonded only to the inner and outer hexagonal features that were machined from an initially all-metallic aerospace quality spur gear. The Hybrid Gear was tested against an all-steel gear and against a mating Hybrid Gear. As a result of the composite to metal fabrication process used, the concentricity of the gears were reduced from their initial high-precision value. Regardless of the concentricity error, the hybrid gears operated successfully for over 300 million cycles at 10000 rpm and 490 in.*lbs torque. Although the design was not optimized for weight, the composite gears were found to be 20% lighter than the all-steel gears. Free vibration modes and vibration/noise tests were also conduct to compare the vibration and damping characteristic of the Hybrid Gear to all-steel gears. The initial results indicate that this type of hybrid design may have a dramatic effect on drive system weight without sacrificing strength.

Handschuh, Robert F.↗

Metal aircraft structural elements reinforced with graphite filamentary composites

Strain compatibility equations are used to evaluate the thermal stresses existing when unidirectional graphite composites are bonded to aluminum structures. Based on thermal stresses and optimum placement of the composite, skin-stringer aluminum panels are optimized for minimum weight compression panels with selective composite reinforcement. Composite reinforced skin-stringer panels are thermal cycled to determine the effect of thermal fatigue on structural integrity. Both cycled and uncycled panels are tested in compression and tension. Test results are correlated with predicted loads. Use of filamentary graphite composites is an efficient method of reinforcing metal structures, but care must be taken to minimize thermal stresses.

Berg, K. R.↗

Response Surface Model Building and Multidisciplinary Optimization Using D-Optimal Designs

This paper discusses response surface methods for approximation model building and multidisciplinary design optimization. The response surface methods discussed are central composite designs, Bayesian methods and D-optimal designs. An over-determined D-optimal design is applied to a configuration design and optimization study of a wing-body, launch vehicle. Results suggest that over determined D-optimal designs may provide an efficient approach for approximation model building and for multidisciplinary design optimization.

Unal, Resit↗

A Design Framework for Thick and Thin Tow-Steered Composites Using Mechanics of Structure Genome

The design of tow-steered composites is one of the most popular and promising topics under the class of variable stiffness structures. In this work, the authors propose a new design framework and tool for the optimization of tow-steered composites. Mechanics of structure genome (MSG) provides accurate computation of plate/shell section properties including thick and highly curved structures. The computed section properties can be directly used in commercial computer-aided engineering tools. Tow-steered composites are modeled through a design framework wherein tow paths are parameterized in a general way and projected onto a finite element mesh, and MSG calculates the local shell/plate properties. The result is a complete workflow from design parameter input to structural performance evaluation. An open-source optimization software package is used to enable constrained optimization of structural stiffness for the broad tow-steered composite design space. Numerical examples are provided to demonstrate the capabilities of this tool and the promise and potential of tow-steered designs that optimize structural performance while satisfying manufacturing constraints.

Su Tian↗

A Design Framework for Thick and Thin Tow-Steered Composites Using Mechanics of Structure Genome

The design of tow-steered composites is one of the most popular and promising topics under the class of variable stiffness structures. In this work, the authors propose a new design framework and tool for the optimization of tow-steered composites. Mechanics of structure genome (MSG) provides accurate computation of plate/shell section properties including thick and highly curved structures. The computed section properties can be directly used in commercial computer-aided engineering tools. Tow-steered composites are modeled through a design framework wherein tow paths are parameterized in a general way and projected onto a finite element mesh, and MSG calculates the local shell/plate properties. The result is a complete workflow from design parameter input to structural performance evaluation. An open-source optimization software package is used to enable constrained optimization of structural stiffness for the broad tow-steered composite design space. Numerical examples are provided to demonstrate the capabilities of this tool and the promise and potential of tow-steered designs that optimize structural performance while satisfying manufacturing constraints.

Su Tian↗

An Integrated Design Tool for Tow-Steered Laminates of Composites in Abaqus and MSC.Patran/Nastran

Tow-steered composites can be tailored for optimal mechanical performance of lightweight structures. However, there are no commercial-grade design tools for tow-steered composite structures, which hinders the design innovation of tow-steered composites in realistic structures. The novelty of this paper is to develop an integrated design framework along with the development of graphical user interface (GUI) plug-ins in commercial finite element (FE) software Abaqus and MSC.Patran/Nastran. The GUI plug-ins take all the design setups and communicate with external codes for the material modeling and optimization, and hence provide a unified design environment within the FE codes. The mechanics of structure genome (MSG) plate model computes shell element properties based on user-defined fiber paths and layup, which are defined via the GUI plug-ins. The optimization is performed by an open-source code, Dakota, from Sandia National Laboratories (Sandia), which also coordinates the structural analysis, material modeling, and optimization in design iterations. Two examples are presented to demonstrate the user-friendliness and versatility of the developed GUI plug-ins. The developed tools will ease the design process and facilitate the application of tow-steered composites in realistic aerospace structures.

Xin Liu↗

An Integrated Design Tool for Tow-Steered Laminates of Composites in Abaqus and MSC.Patran/Nastran

Tow-steered composites can be tailored for optimal mechanical performance of lightweight structures. However, there are no commercial-grade design tools for tow-steered composite structures, which hinders the design innovation of tow-steered composites in realistic structures. The novelty of this paper is to develop an integrated design framework along with the development of graphical user interface (GUI) plug-ins in commercial finite element (FE) software Abaqus and MSC.Patran/Nastran. The GUI plug-ins take all the design setups and communicate with external codes for the material modeling and optimization, and hence provide a unified design environment within the FE codes. The mechanics of structure genome (MSG) plate model computes shell element properties based on user-defined fiber paths and layup, which are defined via the GUI plug-ins. The optimization is performed by an open-source code, Dakota, from Sandia National Laboratories (Sandia), which also coordinates the structural analysis, material modeling, and optimization in design iterations. Two examples are presented to demonstrate the user-friendliness and versatility of the developed GUI plug-ins. The developed tools will ease the design process and facilitate the application of tow-steered composites in realistic aerospace structures.

Xin Liu↗

High-Performance SiC/SiC Ceramic Composite Systems Developed for 1315 C (2400 F) Engine Components

As structural materials for hot-section components in advanced aerospace and land-based gas turbine engines, silicon carbide (SiC) ceramic matrix composites reinforced by high performance SiC fibers offer a variety of performance advantages over current bill-of-materials, such as nickel-based superalloys. These advantages are based on the SiC/SiC composites displaying higher temperature capability for a given structural load, lower density (approximately 30- to 50-percent metal density), and lower thermal expansion. These properties should, in turn, result in many important engine benefits, such as reduced component cooling air requirements, simpler component design, reduced support structure weight, improved fuel efficiency, reduced emissions, higher blade frequencies, reduced blade clearances, and higher thrust. Under the NASA Ultra-Efficient Engine Technology (UEET) Project, much progress has been made at the NASA Glenn Research Center in identifying and optimizing two highperformance SiC/SiC composite systems. The table compares typical properties of oxide/oxide panels and SiC/SiC panels formed by the random stacking of balanced 0 degrees/90 degrees fabric pieces reinforced by the indicated fiber types. The Glenn SiC/SiC systems A and B (shaded area of the table) were reinforced by the Sylramic-iBN SiC fiber, which was produced at Glenn by thermal treatment of the commercial Sylramic SiC fiber (Dow Corning, Midland, MI; ref. 2). The treatment process (1) removes boron from the Sylramic fiber, thereby improving fiber creep, rupture, and oxidation resistance and (2) allows the boron to react with nitrogen to form a thin in situ grown BN coating on the fiber surface, thereby providing an oxidation-resistant buffer layer between contacting fibers in the fabric and the final composite. The fabric stacks for all SiC/SiC panels were provided to GE Power Systems Composites for chemical vapor infiltration of Glenn designed BN fiber coatings and conventional SiC matrices. Composite panels with system B were heat treated at Glenn, and the pores that remained open were filled by silicon melt infiltration (MI). Panels with system A and the other SiC/SiC systems were not heat treated, and remaining open pores in these systems were filled with SiC slurry and silicon MI.

DiCarlo, James A.↗

Optimized Li-Ion Electrolytes Containing Fluorinated Ester Co-Solvents

A number of experimental lithium-ion cells, consisting of MCMB (meso-carbon microbeads) carbon anodes and LiNi(0.8)Co(0.2)O2 cathodes, have been fabricated with increased safety and expanded capability. These cells serve to verify and demonstrate the reversibility, low-temperature performance, and electrochemical aspects of each electrode as determined from a number of electrochemical characterization techniques. A number of Li-ion electrolytes possessing fluorinated ester co-solvents, namely trifluoroethyl butyrate (TFEB) and trifluoroethyl propionate (TFEP), were demonstrated to deliver good performance over a wide temperature range in experimental lithium-ion cells. The general approach taken in the development of these electrolyte formulations is to optimize the type and composition of the co-solvents in ternary and quaternary solutions, focusing upon adequate stability [i.e., EC (ethylene carbonate) content needed for anode passivation, and EMC (ethyl methyl carbonate) content needed for lowering the viscosity and widening the temperature range, while still providing good stability], enhancing the inherent safety characteristics (incorporation of fluorinated esters), and widening the temperature range of operation (the use of both fluorinated and non-fluorinated esters). Further - more, the use of electrolyte additives, such as VC (vinylene carbonate) [solid electrolyte interface (SEI) promoter] and DMAc (thermal stabilizing additive), provide enhanced high-temperature life characteristics. Multi-component electrolyte formulations enhance performance over a temperature range of -60 to +60 C. With the need for more safety with the use of these batteries, flammability was a consideration. One of the solvents investigated, TFEB, had the best performance with improved low-temperature capability and high-temperature resilience. This work optimized the use of TFEB as a co-solvent by developing the multi-component electrolytes, which also contain non-halogenated esters, film forming additives, thermal stabilizing additives, and flame retardant additives. Further optimization of these electrolyte formulations is anticipated to yield improved performance. It is also anticipated that much improved performance will be demonstrated once these electrolyte solutions are incorporated into hermetically sealed, large capacity prototype cells, especially if effort is devoted to ensure that all electrolyte components are highly pure.

Prakash, G. K. Surya↗

Tuning Parameters in Heuristics by Using Design of Experiments Methods

With the growing complexity of today's large scale problems, it has become more difficult to find optimal solutions by using exact mathematical methods. The need to find near-optimal solutions in an acceptable time frame requires heuristic approaches. In many cases, however, most heuristics have several parameters that need to be "tuned" before they can reach good results. The problem then turns into "finding best parameter setting" for the heuristics to solve the problems efficiently and timely. One-Factor-At-a-Time (OFAT) approach for parameter tuning neglects the interactions between parameters. Design of Experiments (DOE) tools can be instead employed to tune the parameters more effectively. In this paper, we seek the best parameter setting for a Genetic Algorithm (GA) to solve the single machine total weighted tardiness problem in which n jobs must be scheduled on a single machine without preemption, and the objective is to minimize the total weighted tardiness. Benchmark instances for the problem are available in the literature. To fine tune the GA parameters in the most efficient way, we compare multiple DOE models including 2-level (2k ) full factorial design, orthogonal array design, central composite design, D-optimal design and signal-to-noise (SIN) ratios. In each DOE method, a mathematical model is created using regression analysis, and solved to obtain the best parameter setting. After verification runs using the tuned parameter setting, the preliminary results for optimal solutions of multiple instances were found efficiently.

Arin, Arif↗

Improved silicon nitride for advanced heat engines

The results of a four year program to improve the strength and reliability of injection-molded silicon nitride are summarized. Statistically designed processing experiments were performed to identify and optimize critical processing parameters and compositions. Process improvements were monitored by strength testing at room and elevated temperatures, and microstructural characterization by optical, scanning electron microscopes, and scanning transmission electron microscope. Processing modifications resulted in a 20 percent strength and 72 percent Weibull slope improvement of the baseline material. Additional sintering aids screening and optimization experiments succeeded in developing a new composition (GN-10) capable of 581.2 MPa at 1399 C. A SiC whisker toughened composite using this material as a matrix achieved a room temperature toughness of 6.9 MPa m(exp .5) by the Chevron notched bar technique. Exploratory experiments were conducted on injection molding of turbocharger rotors.

Yeh, Harry C.↗

Perspectives in aeroelasticity.

Based on selected topics, the paper is broadly aimed to indicate achievements of the past decade, the state of the art, and trends in aeroelasticity. Topics selected for this end include: brief orientation into the history of the subject, roles of active controls and the concept of aerodynamic energy in load alleviation and in flutter suppression, computerized aeroelastic analysis, aeroelastic effects in stability, aeroelastic optimization, the use of composites, recent applications of lifting surface theory to interfering surfaces and control surfaces, transonic flow considerations, and some problems related to the space shuttle.

Garrick, I. E.↗

Quaternary and quinary modifications of eutectic superalloys strengthened by delta Ni3Cb lamellae and gamma prime Ni3Al precipitates

By means of a compositional and heat treatment optimization program based on the quaternary gamma/gamma prime-delta, a tantalum modified gamma/gamma prime-delta alloy with improved shear and creep strength combined with better cyclic oxidation resistance was identified. Quinary additions, quaternary adjustments, and heat treatment were investigated. The tantalum modified gamma/gamma prime-delta alloy possessed a slightly higher liquidus temperature and exhibited rupture strength exceeding NASA VIA by approximately three and one-half Larson-Miller parameters (C = 20) above 1000 C. Although improvements in longitudinal mechanical properties were achieved, the shear and transverse strength property goals of the program were not met and present a continuing challenge to the alloy metallurgist.

Lemkey, F. D.↗

Thermal/acoustical aircraft insulation material

Attempts made to improve the acoustical properties of low density Fiberfrax foam, an aircraft insulation material, are reported. Characterizations were also made of the physical and thermal properties. Two methods, optimization of fiber blend composition and modification of the foam fabrication process, were examined as possible means of improving foam acoustics. Flame impingement tests were also made; results show performance was satisfactory.

Struzik, E. A.↗

Vacuum Die Casting of Silicon Sheet for Photovoltaic Applications

The development of a vacuum die-casting process for producing silicon sheet suitable for photovoltaic cells with a terrestrial efficiency greater than 12 percent and having the potential to be scaled for large quantity production is considered. The initial approach includes: (1) obtaining mechanical design parameters by using boron nitride, which has been shown to non-wetting to silicon; (2) optimizing silicon nitride material composition and coatings by sessile drop experiments; (3) testing effectiveness of fluoride salt interfacial media with a graphite mold; and (4) testing the effect of surface finish using both boron nitride and graphite. When the material and mechanical boundary conditions are established, a finalized version of the prototype assembly will be constructed and the casting variables determined.

Source record↗

LARC-13 adhesive development

A LARC-13 type adhesive system was developed and property data obtained that demonstrated improved thermomechanical properties superior to base LARC-13 adhesive. An improved adhesive for 589 K (600 F) use was developed by physical or chemical modification of LARC-13. The adhesive was optimized for titanium and composite bonding, and a compatible surface preparation for titanium and composite substrates was identified. The data obtained with the improved adhesive system indicated it would meet the 589 K (600 F) properties desired for application on space shuttle components. Average titanium lap shear data were: (1) 21.1 MPa (3355 psi) at RT, (2) 13.0 MPa (1881 psi) at 600 F, and (3) 16.4 MPa (2335) after aging 125 hours at 600 F and tested at 600 F.

Hill, S. G.↗