Search NASA⌕ Search

SEARCH · Search NASA

Results for “correlation spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Tuning the Properties of Nanocomposites by Trapping Them in Deep Metastable States

We report the interfacial region formed in a polymer matrix around nanoparticles (NPs) controls many macroscopic properties of polymer nanocomposites (PNCs). However, understanding the factors controlling structure and properties of interfacial region remains a challenge. We demonstrated that the initial trapping of polymer chains at surfaces of NPs in solution strongly affects the macroscopic properties of PNCs. The most surprising result is that the differences in properties of PNCs persist even after an extremely long thermal annealing time. We ascribe the observed changes to the formation of interfacial layer that is trapped in a deep metastable state already in solution. Furthermore, presented analysis suggests that PNC equilibration time is defined by the chain desorption time that can be extremely long and, in some cases, even not accessible on a reasonable experimental time scale. These results highlight the importance of polymer solution concentrations on the formation of interfacial layer and the macroscopic properties of PNCs.

36 MATERIALS SCIENCE↗
DOE OSTI2022

(3-Aminopropyl)trimethoxysilane Surface Passivation Improves Perovskite Solar Cell Performance by Reducing Surface Recombination Velocity

We demonstrate reduced surface recombination velocity (SRV) and enhanced power-conversion efficiency (PCE) in mixed-cation mixed-halide perovskite solar cells by using (3-aminopropyl)trimethoxysilane (APTMS) as a surface passivator. We show the APTMS serves to passivate defects at the perovskite surface, while also decoupling the perovskite from detrimental interactions at the C 60 interface. We measure a SRV of ~125 ± 14 cm/s, and a concomitant increase of ~100 meV in quasi-Fermi level splitting in passivated devices compared to the controls. We use time-resolved photoluminescence and excitation-correlation photoluminescence spectroscopy to show that APTMS passivation effectively suppresses non-radiative recombination. We show that APTMS improves both the fill factor and open-circuit voltage (V OC ), increasing V OC from 1.03 V for control devices to 1.09 V for APTMS-passivated devices, and leads to a PCE increase from 15.90% to 18.03%. Here, we attribute the enhanced performance to reduced defect density resulting in suppressed nonradiative recombination and lower SRV at the perovskite/transport layer interface.

14 SOLAR ENERGY↗
DOE OSTI2024

Coherent Erbium Spin Defects in Colloidal Nanocrystal Hosts

We demonstrate nearly a microsecond of spin coherence in Er 3+ ions doped in cerium dioxide nanocrystal hosts, despite a large gyromagnetic ratio and nanometric proximity of the spin defect to the nanocrystal surface. The long spin coherence is enabled by reducing the dopant density below the instantaneous diffusion limit in a nuclear spin-free host material, reaching the limit of a single erbium spin defect per nanocrystal. We observe a large Orbach energy in a highly symmetric cubic site, further protecting the coherence in a qubit that would otherwise rapidly decohere. Spatially correlated electron spectroscopy measurements reveal the presence of Ce 3+ at the nanocrystal surface, which likely acts as extraneous paramagnetic spin noise. Even with these factors, defect-embedded nanocrystal hosts show tremendous promise for quantum sensing and quantum communication applications, with multiple avenues, including core-shell fabrication, redox tuning of oxygen vacancies, and organic surfactant modification, available to further enhance their spin coherence and functionality in the future.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2026

Imaging from Macro to Nanoscale: Multimodal Advances in Chemical and Biomedical Imaging

Imaging increasingly serves as a multiscale framework for linking molecular mechanisms to cellular behavior, tissue architecture, and organ phenotypes in biology and unraveling fundamental processes in chemistry, physics and materials science. This Perspective highlights recent advances in chemical and biomedical imaging across macro-, micro-, and nanoscales, using representative examples published in Chemical and Biomedical Imaging (CBMI). At the macroscale, we discuss chemically selective MRI, including endogenous and exogenous CEST strategies, together with photoacoustic imaging as a hybrid modality with functional and chemical contrast. At the microscale, we consider fluorescence, label-free optical and vibrational imaging, and selected X-ray approaches that expand sensitivity, specificity, and temporal resolution in biological and materials systems. At the nanoscale, we highlight super-resolution fluorescence microscopy, single-molecule methods, tip-enhanced Raman spectroscopy, and correlative imaging strategies that resolve local heterogeneity and molecular organization. Across scales, a common theme emerges that advances in probes, contrast mechanisms, instrumentation, and sample handling are enabling chemically informed imaging that connects molecular specificity with biological context.

multiscale imaging↗
DOE OSTI2021

Is Deprotonation of the Oxygen-Evolving Complex of Photosystem II during the S 1 → S 2 Transition Suppressed by Proton Quantum Delocalization?

We address the protonation state of the water-derived ligands in the oxygen-evolving complex (OEC) of photosystem II (PSII), prepared in the S 2 state of the Kok cycle. We perform quantum mechanics/molecular mechanics calculations of isotropic proton hyperfine coupling constants, with direct comparisons to experimental data from two-dimensional hyperfine sublevel correlation (HYSCORE) spectroscopy and extended X-ray absorption fine structure (EXAFS). We find a low-barrier hydrogen bond with significant delocalization of the proton shared by the water-derived ligand, W1, and the aspartic acid residue D1–D61 of the D1 polypeptide. The lowering of the zero-point energy of a shared proton due to quantum delocalization precludes its release to the lumen during the S 1 → S 2 transition. Retention of the proton facilitates the shuttling of a proton during the isomerization of the tetranuclear manganese–calcium–oxo (Mn 4 Ca–oxo) cluster, from the “open” to “closed” conformation, a step suggested to be necessary for oxygen evolution from previous studies. Our findings suggest that quantum-delocalized protons, stabilized by low-barrier hydrogen bonds in model catalytic systems, can facilitate the accumulation of multiple oxidizing equivalents at low overpotentials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Ultrafast relaxation of lattice distortion in two-dimensional perovskites

Direct visualization of ultrafast coupling between charge carriers and lattice degrees of freedom in photoexcited semiconductors has remained a long-standing challenge and is critical for understanding the light-induced physical behaviour of materials under extreme non-equilibrium conditions. Here we obtain a direct visualization of the structural dynamics in monocrystalline 2D perovskites. We achieve this by monitoring the evolution of wavevector-resolved ultrafast electron diffraction intensity following above-bandgap high-density photoexcitation. Our analysis reveals a light-induced ultrafast reduction in antiferro-distortion resulting from a strong interaction between the electron–hole plasma and perovskite lattice, which induces an in-plane octahedra rotation towards a more symmetric phase. Correlated ultrafast spectroscopy performed at the same carrier density as ultrafast electron diffraction reveals that the creation of a dense electron–hole plasma triggers the relaxation of lattice distortion at shorter timescales by modulating the crystal cohesive energy. Then we show that the interaction between carrier gas and lattice can be altered by tailoring the rigidity of the 2D perovskite by choosing an appropriate organic spacer layer.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Vibronic coupling in light-harvesting complex II revisited

A growing body of work has pointed to vibronic mixing as a crucial design principle for efficient energy and charge transfer in natural and artificial systems.= Notable among these studies was the recent observation of vibronically promoted ultrafast energy flow in the major antenna complex of green plants and algae light-harvesting complex II (LHCII)—the most abundant membrane protein on the Earth—via the emerging experimental technique two-dimensional electronic-vibrational (2DEV) spectroscopy. This spectroscopy, which correlates electronic and nuclear degrees-of-freedom, shows promise for providing mechanistic insight into vibronic coupling; however, explicit theoretical input is necessary to extract such a detail. In a separate paper, we have developed a heterodimer model that describes various forms of vibronic coupling—which were speculated to be present in LHCII—resulting from diagonal electron–phonon coupling giving Franck–Condon (FC) activity and the nuclear dependence of the electronic transition dipole moment giving Herzberg–Teller (HT) activity. Here, we draw connections between this theoretical work and recent experimental studies in order to demonstrate how HT activity is leveraged in the function of LHCII.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Simultaneous reproduction of experimental profiles, fluxes, transport coefficients, and turbulence characteristics via nonlinear gyrokinetic profile predictions in a DIII-D ITER similar shape plasma

Experimental conditions obtained on the DIII-D tokamak in the ITER Similar Shape (ISS) have been compared extensively with nonlinear gyrokinetic simulation using the CGYRO code [Candy et al., J. Comput. Phys. 324, 73–93 (2016)] with comparisons spanning ion and electron heat fluxes, electron and impurity particle transport, and turbulent fluctuation levels and characteristics. Bayesian optimization techniques [Rodriguez-Fernandez et al., Nucl. Fusion 62(7), 076036 (2022)], combined with nonlinear gyrokinetics, have been used to obtain simultaneously Qi, Qe, and Γe flux-matched profiles that are found to be in good agreement with experimental profile measurements. Synthetic diagnostics were used to compare measured beam emission spectroscopy and correlation electron cyclotron emission turbulent fluctuations with nonlinear simulation. Although some disagreements exist, nonlinear simulations are found to be in generally good agreement with measured fluctuation levels, spectral shapes, and measured radial trends in low-k δne/ne and δTe/Te. Low (Li and C) and mid-Z (Ca) impurity transport was also compared with these flux-matched simulations. Fully stripped, low-Z impurities are well reproduced by the gyrokinetic modeling while clear disagreement exists in comparisons with mid-Z impurities. Nonlinear gyrokinetic investigation into the Z dependence of impurity transport in the ISS conditions is also performed, demonstrating clear trends of impurity diffusion with impurity Z (both D∝Z and D∝1/Z) that vary with the radial location studied. These trends are shown to result from the local dominance of ion temperature gradient or ∇n driven trapped electron mode turbulence and may contribute to the disagreement between simulation and experiment in mid-Z impurity transport. The results of this work represent one of the most complete validation studies of the gyrokinetic model performed to date and provide an example of new capabilities for predicting performance in future fusion devices.

Physics↗
DOE OSTI2025

Alpha-relaxation by scattering and medium-range atomic correlation in simple liquids

The relaxation dynamics of liquid and glass can be studied by inelastic x-ray or neutron scattering through the intermediate scattering function F(Q, t), where Q is the momentum transfer of scattering. Because of the time-consuming nature of these measurements, F(Q, t) is usually measured only at the first peak of the structure function S(Q), and its principal decay time is referred to as the α-relaxation time τ α . τ α is generally considered to describe the relaxation time of the bulk, which is related to viscosity and is controlled by the atomic cage around an atom. Here, through simulations on metallic liquids, we show that the α-relaxation time determined by scattering experiments does not purely reflect viscosity but is influenced by changes in spatial cooperativity. We also demonstrate that atomic caging is not exerted by the nearest neighbors but involves more cooperative atomic dynamics of the atomic medium-range order.

Glass transitions↗
DOE OSTI2021

de Gennes Narrowing and Relationship between Structure and Dynamics in Self-Organized Ion-Beam Nanopatterning

Investigating the relationship between structure and dynamical processes is a central goal in condensed matter physics. Perhaps the most noted relationship between the two is the phenomenon of de Gennes narrowing, in which relaxation times in liquids are proportional to the scattering structure factor. Here, a similar relationship is discovered during the self-organized ion-beam nanopatterning of silicon using coherent x-ray scattering. However, in contrast to the exponential relaxation of fluctuations in classic de Gennes narrowing, the dynamic surface exhibits a wide range of behaviors as a function of the length scale, with a compressed exponential relaxation at lengths corresponding to the dominant structural motif—self-organized nanoscale ripples. These behaviors are reproduced in simulations of a nonlinear model describing the surface evolution. Our team suggests that the compressed exponential behavior observed here is due to the morphological persistence of the self-organized surface ripple patterns which form and evolve during ion-beam nanopatterning.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Early stage growth of amorphous thin film: Average kinetics, nanoscale dynamics, and pressure dependence

We used the coherent grazing incidence small angle x-ray scattering technique to study the average kinetics and nanoscale dynamics during early-stage a-WSi 2 sputter deposition. The kinetic and dynamic properties are examined as a function of pressure, which is known to be a critical factor in determining final surface roughness. Surface growth kinetics and dynamics are characterized by time parameters extracted from the height-height structure factor and correlation functions. The roughness at a given length scale reaches a maximum before relaxing down to a steady state. The lateral length scale dependence and pressure dependence are then compared among the measured kinetics and dynamics time parameters. Surfaces grown at lower pressures are smoother, leading to longer correlation times. The time parameters to reach a dynamic steady state and a kinetic steady state show contrasting pressure dependence. A dynamic steady state is reached earlier than the kinetic steady state at high pressure. A more random deposition direction and lower kinetic energy at higher pressures can explain these phenomena, along with the hypothesis that larger nanoclusters form in vapor before arriving at the surface. Here, a continuum model is applied to simulate the overall behavior with mixed success.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Effects of microstructure on the oxidation behavior of A3 matrix‐grade graphite

Abstract The oxidation behavior of matrix‐grade graphite in air‐ or steam‐ingress accident scenarios is of great interest for high‐temperature gas reactors (HTGRs). In this study, the microstructures of two variants of matrix‐grade graphite based on the German A3‐3 and A3‐27 formulations were characterized with scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Raman spectroscopy, and correlated to oxidation behavior observed through thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Through TEM imaging and selected area electron diffraction (SAED), a higher volume fraction of partially graphitized carbon was identified in the A3‐3 type graphite than in the A3‐27 type. This structure is believed to have contributed to the accelerated oxidation exhibited by A3‐3 in the chemical reaction‐controlled oxidation regime.

Bratten, Adam↗
DOE OSTI2023

Splitting photons: Singlet fission in nanocrystal-molecule hybrid structures

The goal of this research is to enable all the energy contained in sunlight to be harvested by making full use of the energy contained in the blue and green wavelengths of light. Current systems are unable to extract all of the energy available from photons in this wavelength range due to rapid relaxation processes that dissipate a fraction of the energy as heat. In this work, inexpensive, earth-abundant components capable of supporting multi-excitonic processes involving more than one tightly bound excited state are investigated as a way to exceed the Shockley-Queisser limit. This research will examine hybrid organic-inorganic nanostructures capable of singlet fission, a process by which one high-energy spin-singlet state is converted into two lower-energy spin-triplet states, and subsequent triplet exciton transfer. Specifically, the organic molecules diphenylhexatriene and tetracene that maximally absorb blue light and are known to exhibit singlet fission will be bound to lead chalcogenide nanocrystals. A variety of steady-state and time-resolved spectroscopic techniques will be used to study the transfer of energy from spin-triplet excitons that are created in the organic molecules to the nanoparticle acceptors. The hybrid nanostructures here will be fully characterized both in solution or thin film via electronic absorption and photoluminescence spectroscopy, nuclear magnetic resonance spectroscopy, high-resolution mass spectrometry, transmission electron microscopy, photoelectron spectroscopy, time correlated single photon counting and transient absorption experiments. The effect of molecular and nanocrystal structure on the electronic coupling between the hybrid components will be examined to establish fundamental relationships between structure and triplet energy transfer efficiency. The findings will be directly applicable to a potential tetracene-silicon platform that may ultimately enhance the power conversion efficiency of silicon solar cells.

30 DIRECT ENERGY CONVERSION↗
NASA NTRS2013

Towards Calibrating the Vestan Regolith: Correlating the Petrology, Chemistry and Spectroscopy of Howardites

The Dawn spacecraft carries a visible and infrared mapping spectrometer (VIR) [1] that has acquired spectra for the wavelength range 0.25-5.0 μm at various spatial resolutions covering much of the vestan surface [2]. Through comparison of VIR spectra with laboratory spectra of howardite, eucrite and diogenite meteorites, the distribution of more diogenite-rich and more eucrite-rich terranes on Vesta have been mapped [3], but these maps are qualitative in nature. The available laboratory spectra are not well-integrated with detailed sample petrology or composition limiting their utility for lithologic mapping. Importantly, howardites are now recognized to come in two subtypes, regolithic and fragmental [4]. The former are breccias assembled in part from true regolith, while the latter have had much less exposure to the space environment. We are attempting to develop a more quantitative basis for mapping the distribution of lithologic types on Vesta through acquiring laboratory spectra on splits of howardites that have been petrologically and chemically characterized [5]. Noble gas analyses have been done on some allowing identification of those howardites that have been exposed in the true regolith of Vesta [6].

Mittlefehldt, D. W.↗
NASA NTRS2015

Electron Beam Irradiated Intercalated CNT Yarns For Aerospace Applications

Multi-walled CNT yarns have been experimentally and commercially created to yield lightweight, high conductivity fibers with good tensile properties for application as electrical wiring and multifunctional tendons. Multifunctional tendons are needed as the cable structures in tensegrity robots for use in planetary exploration. These lightweight robust tendons can provide mechanical strength for movement of the robot in addition to power distribution and data transmission. In aerospace vehicles, such as Orion, electrical wiring and harnessing mass can approach half of the avionics mass. Use of CNT yarns as electrical power and data cables could reduce mass of the wiring by thirty to seventy percent. These fibers have been intercalated with mixed halogens to increase their specific electrical conductivity to that near copper. This conductivity, combined with the superior strength and fatigue resistance makes it an attractive alternative to copper for wiring and multifunctional tendon applications. Electron beam irradiation has been shown to increase mechanical strength in pristine CNT fibers through increased cross-linking. Both pristine and intercalated CNT yarns have been irradiated using a 5-megavolt electron beam for various durations and the conductivities and tensile properties will be discussed. Structural information obtained using a field emission scanning electron microscope, energy dispersive X-ray spectroscopy (EDS), and Raman spectroscopy will correlate microstructural details with bulk properties.

electrical wiring↗