Search NASA⌕ Search

SEARCH · Search NASA

Results for “data recovery”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

Use of Drying Technologies for Resource Recovery from Solid Wastes and Brines

Long term storage of unprocessed biological wastes and human wastes can present major health issues and a loss of potential resources. Space vehicles and planetary habitats are typically resource-scarce or resource-limited environments for long-term human habitation. To-date, most of the resources will need to be supplied from Earth, but this may not be possible for long duration human exploration. Based on present knowledge, there is only very limited in-situ resources on planetary habitats. Hence, the opportunity to "live off the land" in a planetary habitat is limited. However, if we assume that wastes generated by human explorers are viewed as resources, there is great potential to utilize and recycle them, thereby reducing the requirements for supply Earth and enabling the "live off the land" exploration scenario. Technologies used for the recovery of resources from wastes should be reliable, safe, easy to operate, fail-proof, modular, automated and preferably multifunctional in being capable of handling mixed solid and liquid wastes. For a lunar habitat, energy does not appear to be the major driving factor amongst the technologies studied. Instead, reliability appears to be more important[1] . This paper reports studies to date on drying technologies to remove water from solid wastes and brines. Experimental performance data obtained for recovery water from wastes and brine are presented. Simplicity of operation of hardware and energy efficiency are discussed. Some improvements and modifications to hardware were performed. Hopefully, this information will assist in future efforts in the "downselection" of technologies for recovery of water and resources from solid wastes and brines.

Wignarajah, Kanapathipillai↗
NASA NTRS1974

Skylab S-193 altimeter experiment performance, results and applications

A description of the Skylab altimeter instrument system along with the appropriate system error model is presented. The data processing flow, orbit computation, and topographic recovery techniques are discussed. Some data analysis results are presented which indicate excellent correlation with underwater topographic features. In addition, results are shown which indicate that the instrument performance was as expected.

Mcgoogan, J. T.↗
NASA NTRS2007

Community Coordinated Modeling Center Support of Operations: Real-Time Simulations and V & V.

In support of Operations Community Coordinated Modeling Center (CCMC) performing validation and verification of space weather models. To identify suitable metrics the CCMC focus on parameters most useful to operations that CCMC resident models can provide. The real time simulations carried out at CCMC are an essential tool to test model performance and stability by using input conditions that may occur in nature at any time. Since 2001, the magnetospheric MHD model BATSRUS has been run in real time using ACE real time data. CCMC staff developed an experimental real-time system that controls uploading of the real-time ACE data, monitors continuous model execution, initiates automatic recovery procedure in case of data gaps or hardware failures, synchronizes BATSRUS and FRC runs, and periodically runs IDL based visualization software.

Kuznetsova, M.↗
NASA NTRSDate not supplied

Hydrological Data at the NASA GES DISC: Current Capabilities and New Opportunities

The NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) is one of twelve NASA Earth science data centers that document, process, archive and distribute data from Earth observation missions and projects. GES DISC maintains an archive of several hydrology datasets, including the Land Data Assimilation Systems (LDAS) and the Gravity Recovery and Climate Experiment (GRACE) Data Assimilation for Drought Monitoring (GRACE-DA-DM) data products. These datasets include model output of heat fluxes, rain, snow, soil temperature, soil moisture, and runoff; and observational forcing data, including surface pressure, temperature, precipitation, downward shortwave and longwave radiation, humidity, and wind. The temporal resolution of the hydrology data at GES DISC ranges from hourly to monthly, and spatial resolutions range from 0.1° to 1.0°. The GES DISC provides services which enable users to aggregate, temporally and spatially subset, regrid, and visualize archived data including the GES DISC Subsetter, Hydrology Data Rods, and the Geospatial Interactive Online Visualization and Analysis Infrastructure (GIOVANNI). The Hydrology Data Rods service optimally reorganizes large hydrological data sets as extended time series, providing more efficient access for the hydrological community. The time series data (aka “data rods”) were integrated into hydrology community tools, such as the Data Rods Explorer on HydroShare. Furthermore, the GES DISC is in the process of migrating its data and services to the cloud. Hydrological data available at the GES DISC are now available in the Amazon Web Services (AWS) cloud (us-west-2 region) providing users Direct S3 data access and the capability for cloud computing operations. In this presentation, the hydrology data products and services currently available at the GES DISC will be summarized. Also discussed are the migration to the cloud, user support through this transition, and the status of migrating the data rods service to the cloud.

Ashley Heath↗
DOE OSTI2020

Detailed space–time variations of the seismic response of the shallow crust to small earthquakes from analysis of dense array data

SUMMARY We compute high-resolution space–time variations of subsurface seismic properties from autocorrelation functions (ACF’s) of noise and local earthquakes, recorded by the Sage Brush Flat dense array deployed around the Clark branch of the San Jacinto fault. The resolved temporal changes are referred to as apparent velocity changes because they reflect both nonlinear response and variations of material properties such as cracking and damage. Apparent velocity changes are estimated at four frequency bands (10–15, 10–20, 15–30 and 20–40 Hz) for two local earthquake data sets. In one analysis, ACF’s from P- and S-wave windows of 31 small events with magnitudes below 3.1 are used to compute the apparent velocity variations with respect to the mean ACF of each phase, and we also use the mean ACF of noise data as reference to estimate the changes. In a further analysis, the temporal evolution of properties is computed using moving time windows in continuous waveform over one-hour long data with noise and earthquake signals. The apparent velocity changes and recovery times are frequency dependent and present a strong spatial variability across the array. The resolved changes are larger and recovery time shorter with data associated with higher frequencies. At frequencies larger than 15 Hz, and using the mean ACF of noise data as a reference, the apparent average velocity changes across the array during the passage of the P and S waves from the small local events are 2.5 per cent and 6 per cent, respectively. The apparent velocity changes decrease by one order of magnitude when the earthquake data are used as a reference. The relatively large changes in response to very low ground motion have important implications on nonlinear processes involving degradation and healing of the subsurface material during common earthquake shaking.

Geochemistry & Geophysics↗
DOE OSTI2023

Predicting Short-Term Deformation in the Central Valley Using Machine Learning

Land subsidence caused by excessive groundwater pumping in Central Valley, California, is a major issue that has several negative impacts such as reduced aquifer storage and damaged infrastructures which, in turn, produce an economic loss due to the high reliance on crop production. This is why it is of utmost importance to routinely monitor and assess the surface deformation occurring. Two main goals that this paper attempts to accomplish are deformation characterization and deformation prediction. The first goal is realized through the use of Principal Component Analysis (PCA) applied to a series of Interferomtric Synthetic Aperture Radar (InSAR) images that produces eigenimages displaying the key characteristics of the subsidence. Water storage changes are also directly analyzed by the use of data from the Gravity Recovery and Climate Experiment (GRACE) twin satellites and the Global Land Data Assimilation System (GLDAS). The second goal is accomplished by building a Long Short-Term Memory (LSTM) model to predict short-term deformation after developing an InSAR time series using LiCSBAS, an open-source InSAR time series package. The model is applied to the city of Madera and produces better results than a baseline averaging model and a one dimensional convolutional neural network (CNN) based on a mean squared error metric showing the effectiveness of machine learning in deformation prediction as well as the potential for incorporation in hazard mitigation models. The model results can directly aid policy makers in determining the appropriate rate of groundwater withdrawal while maintaining the safety and well-being of the population as well as the aquifers’ integrity.

58 GEOSCIENCES↗
NASA NTRS1953

Rocket-Model Investigation of the Longitudinal Stability, Drag, and Duct Performance Characteristics of the North American MX-770 (X-10) Missile at Mach Numbers from 0.80 to 1.70

A free-flight 0.12-scale rocket-boosted model of the North American MX-770 (X-10) missile has been tested in flight by the Pilotless Aircraft Research Division of the Langley Aeronautical Laboratory. Drag, longitudinal stability, and duct performance data were obtained at Mach numbers from 0.8 to 1.7 covering a Reynolds number range of about 9 x 10(exp 6) to 24 x 10(exp 6) based on wing mean aerodynamic chord. The lift-curve slope, static stability, and damping-in-pitch derivatives showed similar variations with Mach number, the parameters increasing from subsonic values in the transonic region and decreasing in the supersonic region. The variations were for the most part fairly smooth. The aerodynamic center of the configuration shifted rearward in the transonic region and moved forward gradually in the supersonic region. The pitching effectiveness of the canard control surfaces was maintained throughout the flight speed range, the supersonic values being somewhat greater than the subsonic. Trim values of angle of attack and lift coefficient changed abruptly in the transonic region, the change being associated with variations in the out-of-trim pitching moment, control effectiveness, and aerodynamic-center travel in this speed range. Duct total-pressure recovery decreased with increase in free-stream Mach number and the values were somewhat less than normal-shock recovery. Minimum drag data indicated a supersonic drag coefficient about twice the subsonic drag coefficient and a drag-rise Mach number of approximately 0.90. Base drag was small subsonically but was about 25 percent of the minimum drag of the configuration supersonically.

Bond, Aleck C.↗
DOE OSTI2022

Predicting the recovery and grade of a rougher flotation circuit from liberation data

A flotation model has been validated against the survey data obtained from a copper rougher flotation circuit with a circulating load. Here, the model was developed using the hydrophobic force as a kinetic parameter, which made it possible to use the contact angles of the free and composite particles as input parameters so that the model can predict both recoveries and grades. The model also recognizes the role of bubble coarsening in determining the froth phase recoveries and grades. The model predictions are in good agreement with the survey data. The size-by-size recovery curve as predicted from the model shows an optimum particle size range that is consistent with most of the operating data reported in the literature. The model suggests that the upper particle size limit may be determined by the instability of the froth phase rather than the turbulence in the pulp phase of a flotation cell.

36 MATERIALS SCIENCE↗
NASA NTRS2008

Using an Informative Missing Data Model to Predict the Ability to Assess Recovery of Balance Control after Spaceflight

Astronauts show degraded balance control immediately after spaceflight. To assess this change, astronauts' ability to maintain a fixed stance under several challenging stimuli on a movable platform is quantified by "equilibrium" scores (EQs) on a scale of 0 to 100, where 100 represents perfect control (sway angle of 0) and 0 represents data loss where no sway angle is observed because the subject has to be restrained from falling. By comparing post- to pre-flight EQs for actual astronauts vs. controls, we built a classifier for deciding when an astronaut has recovered. Future diagnostic performance depends both on the sampling distribution of the classifier as well as the distribution of its input data. Taking this into consideration, we constructed a predictive ROC by simulation after modeling P(EQ = 0) in terms of a latent EQ-like beta-distributed random variable with random effects.

Feiveson, Alan H.↗
DOE OSTI2024

OzDES Reverberation Mapping Program: Stacking analysis with Hβ, Mg ii , and C iv

ABSTRACT Reverberation mapping is the leading technique used to measure direct black hole masses outside of the local Universe. Additionally, reverberation measurements calibrate secondary mass-scaling relations used to estimate single-epoch virial black hole masses. The Australian Dark Energy Survey (OzDES) conducted one of the first multi-object reverberation mapping surveys, monitoring 735 AGN up to z ∼ 4, over 6 years. The limited temporal coverage of the OzDES data has hindered recovery of individual measurements for some classes of sources, particularly those with shorter reverberation lags or lags that fall within campaign season gaps. To alleviate this limitation, we perform a stacking analysis of the cross-correlation functions of sources with similar intrinsic properties to recover average composite reverberation lags. This analysis leads to the recovery of average lags in each redshift-luminosity bin across our sample. We present the average lags recovered for the Hβ, Mg ii, and C iv samples, as well as multiline measurements for redshift bins where two lines are accessible. The stacking analysis is consistent with the Radius–Luminosity relations for each line. Our results for the Hβ sample demonstrate that stacking has the potential to improve upon constraints on the R–L relation, which have been derived only from individual source measurements until now.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Precise 𝐾* ⁡(892) → 𝐾⁡𝜋 branching fractions

Although discovered more than sixty years ago, direct measurement of the 𝐾*⁡(892) → 𝐾⁡𝜋 branching fractions is a formidable challenge that has not been attempted. Typically they are assumed to obey the isospin limit in hundreds of particle data measurements. We show that an abundance of recent amplitude analyses and other data, however, enables recovery of the ratios ℬ⁡(𝐾 *+ → 𝐾 + ⁢𝜋 0 )/ℬ⁡(𝐾 *+ → 𝐾$^0_S$ ⁢𝜋 + ) and 4⁢ℬ⁡(𝐾 *0 → 𝐾$^0_S$ ⁢𝜋 0 )/ℬ⁡(𝐾 *0 → 𝐾 +⁢ 𝜋 − ) at ∼5% precision.

Gligorov, Vladimir V. [Sorbonne Université, Paris ↗
DOE OSTI2023

PacBio high‐throughput multi‐locus sequencing reveals high genetic diversity in mushroom‐forming fungi

Abstract Multi‐locus sequence data are widely used in fungal systematic and taxonomic studies to delimit species and infer evolutionary relationships. We developed and assessed the efficacy of a multi‐locus pooled sequencing method using PacBio long‐read high‐throughput sequencing. Samples included fresh and dried voucher specimens, cultures and archival DNA extracts of Agaricomycetes with an emphasis on the order Cantharellales. Of the 283 specimens sequenced, 93.6% successfully amplified at one or more loci with a mean of 3.3 loci amplified. Our method recovered multiple sequence variants representing alleles of rDNA loci and single copy protein‐coding genesrpb1,rpb2 andtef1. Within‐sample genetic variation differed by locus and taxonomic group, with the greatest genetic divergence observed among sequence variants ofrpb2 andtef1 from corticioid Cantharellales. Our method is a cost‐effective approach for generating accurate multi‐locus sequence data coupled with recovery of alleles from polymorphic samples and multi‐organism specimens. These results have important implications for understanding intra‐individual genomic variation among genetic loci commonly used in species delimitation of fungi.

Biochemistry & Molecular Biology↗
NASA NTRS1971

Human otolith function, experiment M009

The experiments that were performed during the Gemini 5 and 7 missions resulted in quantitative information concerning otolithic function and orientation of four subjects exposed to an orbiting spacecraft environment for prolonged periods of time. Preflight counterrolling measurements revealed significant differences between crewmembers with regard to the basic magnitude of otolith response. However, after the flight, each crewmember maintained his respective preflight level of response. This was indicative that no significant change in otolithic sensitivity occurred as a result of the flight, or at least no change persisted long enough to be recorded several hours after recovery. The EVLH data recorded for each subject confirmed the observation that a coordinate space sense exists even in a weightless environment if contact cues are adequate. However, it was noted that the apparent location of the horizontal within the spacecraft may not agree necessarily with its physical correlate in the spacecraft.

Graybiel, A.↗
NASA NTRS1974

Effect of bed rest and exercise on body balance

A battery of 11 body balance tests was administered to 7 men before and after 14 days of bedrest. Seven men who had not undergone bed rest served as controls. During bed rest, each subject underwent daily either isotonic, isometric, or no leg exercise. The results showed that, for the bed-rested no exercise, isotonic exercise, and isometric exercise groups, 2 weeks of bed rest produces significant body balance decrements on 3, 4, and 5 of the 11 tests, respectively. Daily leg exercise did not prevent the debilitating effects of bed rest on body balance. After bed rest, balance skill was relearned rapidly so that in most tests, performance had reached prebed-rest levels by the third recovery day. These data suggest that balance impairment is not due to loss of muscular strength in the legs but, perhaps, to a bed-rest-related change in the neurally coded information to postural control centers.

Haines, R. F.↗
NASA NTRS1975

Remote sensing of submerged aquatic vegetation in the lower Chesapeake Bay

An experimental water penetration film and black and white near infrared film were used to study the distribution of submerged aquatic vegetation in the lower Chesapeake Bay. Detailed description of the grass beds was obtained by flying at an altitude of 5,000 feet, at low tide when wind conditions were minimal. Results show that there was a 36% reduction in the amount of submerged aquatic vegetation in the lower Chesapeake Bay from 1971 to 1974, the greatest losses occurring in the York, Piankatank and Rappahannock rivers (tabulated data is given). Recovery of some grass beds occurs primarily through seedling recruitment and subsequent vegetative growth. Cownose rays are suspected as a main factor for the decimation of some of the grass beds. Maps and photographs of the areas studied are given.

Orth, R. J.↗
NASA NTRS1975

Radio-controlled model design and testing techniques for stall/spin evaluation of general-aviation aircraft

A relatively inexpensive radio-controlled model stall/spin test technique was developed. Operational experiences using the technique are presented. A discussion of model construction techniques, spin-recovery parachute system, data recording system, and movie camera tracking system is included. Also discussed are a method of measuring moments of inertia, scaling of engine thrust, cost and time required to conduct a program, and examples of the results obtained from the flight tests.

Burk, S. M., Jr.↗
NASA NTRS1981

Development and fabrication of a fast recovery, high voltage power diode

The use of positive bevels for P-I-N mesa structures to achieve high voltages is described. The technique of glass passivation for mesa structures is described. The utilization of high energy radiation to control the lifetime of carriers in silicon is reported as a means to achieve fast recovery times. Characterization data is reported and is in agreement with design concepts developed for power diodes.

Berman, A. H.↗