Search NASA⌕ Search

SEARCH · Search NASA

Results for “deep space linking”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

NAND Flash Qualification Guideline

Better performing Forward Error Correction on the forward link along with adequate power in the data open an uplink operations trade space that enable missions to: Command to greater distances in deep space (increased uplink margin). Increase the size of the payload data (latency may be a factor). Provides space for the security header/trailer of the CCSDS Space Data Link Security Protocol. Note: These higher rates could be used for relief of emergency communication margins/rates and not limited to improving top-end rate performance. A higher performance uplink could also reduce the requirements on flight emergency antenna size and/or the performance required from ground stations. Use of a selective repeat ARQ protocol may increase the uplink design requirements but the resultant development is deemed acceptable, due the factor of 4 to 8 potential increase in uplink data rate.

Floating Gate Memory↗
NASA NTRS2012

Replacing the CCSDS Telecommand Protocol with Next Generation Uplink

Better performing Forward Error Correction on the forward link along with adequate power in the data open an uplink operations trade space that enable missions to: Command to greater distances in deep space (increased uplink margin) Increase the size of the payload data (latency may be a factor) Provides space for the security header/trailer of the CCSDS Space Data Link Security Protocol Note: These higher rates could be used for relief of emergency communication margins/rates and not limited to improving top-end rate performance. A higher performance uplink could also reduce the requirements on flight emergency antenna size and/or the performance required from ground stations. Use of a selective repeat ARQ protocol may increase the uplink design requirements but the resultant development is deemed acceptable, due the factor of 4 to 8 potential increase in uplink data rate.

Low Density Parity Check (LDPC)↗
NASA NTRS2020

Autonomous Optical-only Navigation for Deep Space Missions

Navigation of spacecraft for interplanetary missions is typically performed on the ground using a two-way radio link to obtain the necessary tracking data. Due to the limited number of antenna capable of tracking these spacecraft, it would be advantageous to have a navigation capability that is entirely self-contained onboard a spacecraft. A camera mounted on a spacecraft is theoretically capable of enabling self-navigating spacecraft, and has been demonstrated in limited circumstances in past missions. Fundamentally, the technique involves using various natural or artificial targets as observational beacons to determine the observers position in space. In this paper, the technique of optical-only navigation is described, including discussions of what types of observations are used, and results of analysis showing the accuracies achievable for various mission types across the Solar System is discussed.

Bhaskaran, Shyam↗
NASA NTRS1997

Trends in Performance and Characteristics of Ultra-Stable Oscillators for Deep Space Radio Science Experiments

Telecommunication systems of spacecraft on deep space missions also function as instruments for Radio Science experiments. Radio scientists utilize the telecommunication links between spacecraft and Earth to examine very small changes in the phase/frequency, amplitude, and/or polarization of radio signals to investigate a host of physical phenomena in the solar system. Several missions augmented the radio communication system with an Ultra-Stable Oscillator (USO) in order to provide a highly stable reference signal for oneway downlink. This configuration is used in order to enable better investigations of the atmospheres of the planets occulting the line-of-sight to the spacecraft; one-way communication was required and the transponders' built-in auxiliary oscillators were neither sufficiently stable nor spectrally pure for the occultation experiments. Since Radio Science instrumentation is distributed between the spacecraft and the ground stations, the Deep Space Network (DSN) is also equipped to function as a world-class instrument for Radio Science research. For a detailed account of Radio Science experiments, methodology, key discoveries, and the DSN's historical contribution to the field, see Asmar and Renzetti (1993). The tools of Radio Science can be and have also been utilized in addressing several mission engineering challenges; e.g., characterization of spacecraft nutation and anomalous motion, antenna calibrations, and communications during surface landing phases. Since the first quartz USO was flown on Voyager, the technology has advanced significantly, affording future missions higher sensitivity in reconstructing the temperature pressure profiles of the atmospheres under study as well as other physical phenomena of interest to Radio Science. This paper surveys the trends in stability and spectral purity performance, design characteristics including size and mass, as well as cost and history of these clocks in space.

Asmar, Sami↗
NASA NTRS1994

(abstract) Spacecraft Doppler Tracking with the Deep Space Network in the Search for Gravitational Waves

The Deep Space Network generates accurate radio science data observables for investigators who use radio links between spacecraft and the Earth to examine small changes in the phase and/or amplitude of the signal to study a wide variety of structures and phenomena in space. Several such studies are directed at aspects of the theory of general relativity such as gravitational redshift and gravitational waves. A gravitational wave is a propagating, polarized gravitational field, a ripple in the curvature of space-time. In Einstein's theory of general relativity, the waves are propagating solutions of the Einstein field equations. Their amplitudes are dimensionless strain amplitudes that change the fractional difference in distance between test masses and the rates at which separated clocks keep time. Predicted by all relativistic theories of gravity, they are extremely weak (the ratio of gravitational forces to electrical forces is about 10(sup -40)) and are generated at detectable levels only by astrophysical sources - very massive sources under violent dynamical conditions. The waves have never been detected but searches in the low-frequency band using Doppler tracking of many spacecraft have been conducted and others are being planned. Upper limits have been placed on the gravitational wave strength with the best sensitivities to date are for periodic waves being 7 x 10(sup -15).

gravitational waves theory of general relativity D↗
NASA NTRS2008

Analysis of System Margins on Missions Utilizing Solar Electric Propulsion

NASA's Jet Propulsion Laboratory has conducted a study focused on the analysis of appropriate margins for deep space missions using solar electric propulsion (SEP). The purpose of this study is to understand the links between disparate system margins (power, mass, thermal, etc.) and their impact on overall mission performance and robustness. It is determined that the various sources of uncertainty and risk associated with electric propulsion mission design can be summarized into three relatively independent parameters 1) EP Power Margin, 2) Propellant Margin and 3) Duty Cycle Margin. The overall relationship between these parameters and other major sources of uncertainty is presented. A detailed trajectory analysis is conducted to examine the impact that various assumptions related to power, duty cycle, destination, and thruster performance including missed thrust periods have on overall performance. Recommendations are presented for system margins for deep space missions utilizing solar electric propulsion.

Systems Engineering↗
NASA NTRS2005

Integrated Network Architecture for Sustained Human and Robotic Exploration

The National Aeronautics and Space Administration (NASA) Exploration Systems Enterprise is planning a series of human and robotic missions to the Earth's moon and to Mars. These missions will require communication and navigation services. This paper1 sets forth presumed requirements for such services and concepts for lunar and Mars telecommunications network architectures to satisfy the presumed requirements. The paper suggests that an inexpensive ground network would suffice for missions to the near-side of the moon. A constellation of three Lunar Telecommunications Orbiters connected to an inexpensive ground network could provide continuous redundant links to a polar lunar base and its vicinity. For human and robotic missions to Mars, a pair of areostationary satellites could provide continuous redundant links between Earth and a mid-latitude Mars base in conjunction with the Deep Space Network augmented by large arrays of 12-m antennas on Earth.

robotics↗
NASA NTRS2018

Lunar Relay Coverage Analysis for RF and Optical Links

This paper describes our effort in searching different lunar relay architectures and assessing their coverage performance and other pros and cons for RF and optical links. Regarding RF links, we considered three notional lunar relay architectures, all communicating with the three sites of the Deep Space Network (DSN): Goldstone, California; Canberra, Australia; and Madrid, Spain: 1) A constellation of three relay orbiters: two at the Polar frozen elliptical orbits, and one at an equatorial circular orbit. 2) One relay orbiter in a 74-day Lissajous orbit at Earth-Moon Lagrange Point L2. 3) One relay orbiter in a 14-day Lunar distance retrograde orbit. Regarding optical link, we considered a notional multi-hop relay architecture that consists of one relay orbiter in a 74-day Lissajous orbit at Earth-Moon L2 (as in architecture #2 in the RF case), three Near-Earth relay satellites in geosynchronous orbit at longitudes 187° E, 110° E, and 347° E, and three ground stations at White Sands (US), Guam (US), and Tenerife (Spain). We introduce the additional constraints of Sun-“Earth”Probe (SEP) angle for return links, and Sun-Probe-“Earth” (SPE) angle for forward links. SPE and SPE angles determine the amount of sunlight (noise) that goes into the detector of the telescope, thus affecting the capacity of an optical link.

Lee, Charles↗
NASA NTRS2021

Capabilities and Performance of Juno’s Radio Science Instrumentation

The Juno Gravity Science Instrument is a radio science instrument onboard the Juno spacecraft, which entered orbit around Jupiter in 2016. The prime objective of the radio science investigation is to estimate the gravitational field of Jupiter from the Doppler shift on the radio link between the spacecraft and the Earth-based observing antennas of NASA’s Deep Space Network (DSN). The instrument is composed of a ground component at the DSN’s DSS-25 antenna, equipped with simultaneous dual X- and Ka-band transmitters and receivers, and a spacecraft component, which includes X- and Ka-band transponders to relay the transmitted signal back to Earth. The frequencies of these signals are measured using sensitive open-loop and closed-loop receivers of the DSN. Using the unique geometry of Juno’s orbit around Jupiter and the exquisite precision of the radio science instrumentation (~5-10 microns/sec one-way), the gravity field of Jupiter has been probed to unprecedented precision, allowing for discoveries of Jupiter’s core size and depth of the zonal winds. This precision is thanks to a detailed data processing and calibration techniques. An Advanced Water Vapor Radiometer measures the tropospheric delay and a linear combination X- and Ka-band links calibrates for Earth ionosphere, solar plasma, and Jovian plasma. Recent measurements probed the electron content inside Jupiter’s Io Plasma Torus, a doughnut-shaped ring of charged particles caught in Jupiter’s magnetosphere. Results from these measurements not only contributes to the scientific literature but also informs the performance of the instrument itself and can be used in future planning.

Oudrhiri, Kamal↗
NASA NTRS1988

The Deep Space Network: An instrument for radio astronomy research

The NASA Deep Space Network operates and maintains the Earth-based two-way communications link for unmanned spacecraft exploring the solar system. It is NASA's policy to also make the Network's facilities available for radio astronomy observations. The Network's microwave communication systems and facilities are being continually upgraded. This revised document, first published in 1982, describes the Network's current radio astronomy capabilities and future capabilities that will be made available by the ongoing Network upgrade. The Bibliography, which includes published papers and articles resulting from radio astronomy observations conducted with Network facilities, has been updated to include papers to May 1987.

Renzetti, N. A.↗
NASA NTRS2019

An Update on the CCSDS Optical Communications Working Group Interoperability Standards

International space agencies around the world are working together in the Interagency Operation Advisory Group (IOAG) and the Consultative Committee for Space Data Systems (CCSDS) to develop interoperability standards for optical communications. The standards support optical communication systems for both Near Earth and Deep Space robotic and human-rated spacecraft. The standards generally address both free space links between spacecraft and free space links between spacecraft and ground. This paper will overview the history and structure of the CCSDS Optical Communications Working Group and provide an update on the set of optical communications standards being developed. The paper will address the ongoing work on High Photon Efficiency communications, High Data Rate communications, and Optical On/Off Keying communications. It will also cover the working being done within CCSDS on documenting atmospheric measurement techniques and link operations concepts.

Edwards, Bernard L.↗
NASA NTRS2011

Identification of Abnormal System Noise Temperature Patterns in Deep Space Network Antennas Using Neural Network Trained Fuzzy Logic

This paper presents the development of a fuzzy logic function trained by an artificial neural network to classify the system noise temperature (SNT) of antennas in the NASA Deep Space Network (DSN). The SNT data were classified into normal, marginal, and abnormal classes. The irregular SNT pattern was further correlated with link margin and weather data. A reasonably good correlation is detected among high SNT, low link margin and the effect of bad weather; however we also saw some unexpected non-correlations which merit further study in the future.

pattern identification↗
NASA NTRS2010

The Future of NASA's Deep Space Network and Applications to Planetary Probe Missions

NASA's Deep Space Network (DSN) has been an invaluable tool in the world's exploration of space. It has served the space-faring community for more than 45 years. The DSN has provided a primary communication pathway for planetary probes, either through direct- to-Earth links or through intermediate radio relays. In addition, its radiometric systems are critical to probe navigation and delivery to target. Finally, the radio link can also be used for direct scientific measurement of the target body ('radio science'). This paper will examine the special challenges in supporting planetary probe missions, the future evolution of the DSN and related spacecraft technology, the advantages and disadvantages of radio relay spacecraft, and the use of the DSN radio links for navigation and scientific measurements.

Deep Space Network (DSN)↗
NASA NTRS2020

Calibration and Performance of Juno Radio Science Data

Juno Radio Science measures the frequency of X- and Ka-band radio links between the Juno spacecraft and the Earth-based observing stations of NASA’s Deep Space Network (DSN) in order to determine the gravitational field of Jupiter. The received frequency contains information on the gravitational field and is also perturbed by the propagation environment, including Earth troposphere and ionosphere, electrons in the solar plasma, electrons in the Io Plasma Torus around Jupiter, and instrumental effects on both the spacecraft and the ground electronics. Each of these effects must be calibrated out of the data to ensure an accurate estimation of the Jupiter gravitational field. This work discusses the data processing, calibration, and performance of the frequency measurements. The precision of the frequency measurements average 1.1 mHz (1σ standard deviation at 60 second integration time), or 5.3 microns/sec in units of velocity. The remaining noise sources are primarily from residual troposphere and charged particles. Further improvement could be made in future radio science experiments with the addition of a cross-link and stiffer ground antennas.

Buccino, Dustin R↗
NASA NTRS2021

Calibration and Performance of Juno Radio Science Data

Juno Radio Science measures the frequency of X- and Ka-band radio links between the Juno spacecraft and the Earth-based observing stations of NASA’s Deep Space Network (DSN) in order to determine the gravitational field of Jupiter. The received frequency contains information on the gravitational field and is also perturbed by the propagation environment, including Earth troposphere and ionosphere, electrons in the solar plasma, electrons in the Io Plasma Torus around Jupiter, and instrumental effects on both the spacecraft and the ground electronics. Each of these effects must be calibrated out of the data to ensure an accurate estimation of the Jupiter gravitational field. This work discusses the data processing, calibration, and performance of the frequency measurements. The precision of the frequency measurements average 1.1 mHz (1σ standard deviation at 60 second integration time), or 5.3 microns/sec in units of velocity. The remaining noise sources are primarily from residual troposphere and charged particles. Further improvement could be made in future radio science experiments with the addition of a cross-link and stiffer ground antennas.

Oudrhiri, Kamal↗
NASA NTRS1992

High-Dynamic-Range Fiber-Optic Link For Microwave Signals

Ultrastable fiber-optic communications system transmits microwave signals between antenna sites of Deep Space Network (DSN) and central processing station several kilometers away. Permits relocation of critical components from front-end areas of DSN antennas to central location, permitting radio-frequency (RF) antenna arraying, improving DSN flexibility, maintainability, and system performance. Also useful in commercial analog and digital communications.

Logan, Ronald T., Jr.↗
NASA NTRS2011

Deep Space Network-Wide Portal Development: Planning Service Pilot Project

The Deep Space Network (DSN) is an international network of antennas that supports interplanetary spacecraft missions and radio and radar astronomy observations for the exploration of the solar system and the universe. DSN provides the vital two-way communications link that guides and controls planetary explorers, and brings back the images and new scientific information they collect. In an attempt to streamline operations and improve overall services provided by the Deep Space Network a DSN-wide portal is under development. The project is one step in a larger effort to centralize the data collected from current missions including user input parameters for spacecraft to be tracked. This information will be placed into a principal repository where all operations related to the DSN are stored. Furthermore, providing statistical characterization of data volumes will help identify technically feasible tracking opportunities and more precise mission planning by providing upfront scheduling proposals. Business intelligence tools are to be incorporated in the output to deliver data visualization.

project development↗