Search NASA⌕ Search

SEARCH · Search NASA

Results for “dislocation glide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Real-time nanoscale observation of deformation mechanisms in CrCoNi-based medium- to high-entropy alloys at cryogenic temperatures

Technologically important mechanical properties of engineering materials often degrade at low temperatures. One class of materials that defy this trend are CrCoNi-based medium- and high-entropy alloys, as they display enhanced strength, ductility, and toughness with decreasing temperature. Here we show, using in situ straining in the transmission electron microscope at 93 K (–180 °C) that their exceptional damage tolerance involves a synergy of deformation mechanisms, including twinning, glide of partials and full dislocations, extensive cross-slip, and multiple slip activated by dislocation and grain-boundary interactions. In particular, massive cross-slip occurs at the early stages of plastic deformation, thereby promoting multiple slip and dislocation interactions. Furthermore these results indicate that the reduced intensity of thermal activation of defects at low temperatures and the required increase of applied stress for continued plastic flow, together with high lattice resistance, play a pivotal role in promoting the concurrent operation of multiple deformation mechanisms, which collectively enable the outstanding mechanical properties of these alloys.

36 MATERIALS SCIENCE↗

Optimum high temperature strength of two-dimensional nanocomposites

High-temperature nanoindentation was used to reveal nano-layer size effects on the hardness of two-dimensional metallic nanocomposites. We report the existence of a critical layer thickness at which strength achieves optimal thermal stability. Transmission electron microscopy and theoretical bicrystal calculations show that this optimum arises due to a transition from thermally activated glide within the layers to dislocation transmission across the layers. We demonstrate experimentally that the atomic-scale properties of the interfaces profoundly affect this critical transition. The strong implications are that interfaces can be tuned to achieve an optimum in high temperature strength in layered nanocomposite structures.

36 MATERIALS SCIENCE↗

Simulation of the interaction between an edge dislocation and $\langle$111$\rangle$ interstitial dislocation loops in α-iron

The dependence of the interactions of intermediate-size ½<111> self-interstitial atom (SIA) loops with an edge dislocation on strain rate and temperature was discovered by molecular dynamics (MD) simulations for the interatomic potential derived by Ackland et al. (A97). For low temperatures ($T$ =1 K), the mechanisms of the interactions were in agreement with recent literature. It was demonstrated that a second passing of the dislocation through the loop led to a different mechanism than the one that occurred upon first passing. Since these mechanisms are associated with different SIA loop sizes, and since the loop lost a number of SIAs upon first interaction, it was deduced that the dividing threshold between large and small loops (rendering them strong or weak obstacles, respectively) is at the vicinity of the loop size studied (169 SIAs). For higher temperatures ($T$ = 300 K), the strain rate dependence proved strong: for low strain rates, the dislocation absorbed the loop as a double super-jog almost immediately and continued its glide unimpeded. For a high strain rate, the dislocation was initially pinned due to the formation of an almost sessile segment leading to high critical stress.

36 MATERIALS SCIENCE↗

Modeling dislocations in a polycrystal using the generalized finite element method.

Modeling the interaction of dislocations with internal boundaries and free surfaces is essential to understanding the effect of material microstructure on dislocation motion. However, discrete dislocation dynamics methods rely on infinite domain solutions of dislocation fields which makes modeling of heterogeneous materials difficult. A finite domain dislocation dynamics capability is under development that resolves both the dislocation array and polycrystalline structure in a compatible manner so that free surfaces and material interfaces are easily treated. In this approach the polycrystalline structure is accommodated using the GFEM, and the displacement due to the dislocation array is added to the displacement approximation. Shown in figure 1 are representative results from simulations of randomly placed and oriented dislocation sources in a cubic nickel polycrystal. Each grain has a randomly assigned (unique) material basis, and available glide planes are chosen accordingly. The change in basis between neighboring grains has an important effect on the motion of dislocations since the resolved shear on available glide planes can change dramatically. Dislocation transmission through high angle grain boundaries is assumed to occur by absorption into the boundary and subsequent nucleation in the neighboring grain. Such behavior is illustrated in figure 1d. Nucleation from the vertically oriented source in the bottom right grain is due to local stresses from dislocation pile-up in the neighboring grain. In this talk, the method and implementation is presented as well as some representative results from large scale (i.e., massively parallel) simulations of dislocation motion in cubic nano-domain nickel alloy. Particular attention will be paid to the effect of grain size on polycrystalline strength.

36 MATERIALS SCIENCE↗

Nucleation Mechanism of Dislocation Half-Loop Arrays in 4H-Silicon Carbide Homo-Epitaxial Layers

A model is presented for the formation mechanism of dislocation half-loop arrays formed during the homoepitaxial growth of 4H-SiC. The reorientation during glide of originally screw oriented threading segments of basal plane dislocation (BPD) renders them susceptible to conversion into sessile threading edge dislocations (TEDs), which subsequently pin the motion of the BPD. Continued glide during further growth enables parts of the mobile BPD to escape through the surface leaving arrays of half loops comprising two TEDs and a short BPD segment with significant edge component. The faulting behavior of the arrays under UV excitation is consistent with this model.

36 MATERIALS SCIENCE↗

Heavy boron doping effects on biaxially tensile strained germanium (>1.5%) investigated via structural characterization, effective lifetime assessment and atomistic modeling

Highly tensile strained germanium (ε-Ge) represents an essential material system for emerging electronic and photonics applications. Moreover, adjusting the doping levels to moderate or high concentrations can effectively tailor the properties of ε-Ge for specific applications. This article combines experimental characterization with a theoretical framework to examine the effects of heavy elemental boron (B) doping on pseudomorphic sub-50 nm ε-Ge. High resolution X-ray diffractometry is used to validate tensile strain levels of 1.53% and 1.68% in Ge epilayers, surpassing the indirect-to-direct band gap crossover point at ∼1.5% biaxial tensile strain. Cross-sectional transmission electron microscopy revealed visual evidence of stacking faults and surface roughening in 1.68% ε-Ge, although a coherent and abrupt Ge/III–V heterointerface is observed, devoid of interfacial misfit dislocations. Effective lifetime measurements demonstrated approximately twofold enhancement in 1.53% B-doped ε-Ge (N B ∼7 × 10 19 cm −3 ) compared to its unstrained B-doped counterpart, while no such improvement was observed in 1.68% B-doped ε-Ge. This lack of enhancement is attributed to the presence of stacking faults and surface roughness within the ε-Ge epilayer. Through density functional theory calculations, we independently demonstrate that substitutional B atoms induce local deformation of Ge–Ge bonds in both unstrained Ge and ε-Ge epilayers, resulting in an additive tensile strain. This phenomenon could potentially lead to dynamic reduction and overcoming of the critical layer thickness for the system, facilitating the nucleation and subsequent glide of 90° leading Shockley partial dislocations, thereby generating stacking faults. In essence, these findings establish an upper limit on the B-doping concentration that can be achieved in highly ε-Ge epilayers, and collectively, offer valuable insights into the significance of heavy doping in Ge-based heterostructures. As such, this study delineates a fundamental constraint for integrating heavily doped ε-Ge in high-performance optoelectronic systems, necessitating precise strain-doping co-optimization to avoid performance degradation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Self-consistent inhomogeneity of quantum wells in II-VI semiconductors

An X-ray diffraction method that uses a slightly diverging (3') beam and maximally attainable diffraction angles {theta}{sub B} (as large as 77{sup o}) was developed to study quantum wells (QWs) with widths of 5-8 nm separated by wide (100-220 nm) barrier layers. The advantage of this method compared to the use of a parallel beam is an increase by two orders of magnitude in the intensity of the beam incident on the sample and an increase in the probability of diffraction for all QWs as a unified single crystal. It is found that the growth on GaAs substrates misoriented by 10{sup o} from the (001) plane in the [111]{sub II} direction brings about monoclinization of crystal lattices of the QW layers and barrier layers in opposite directions. Inhomogeneity of composition over the thickness of each well is observed. In the case of growth of a ZnSe/ZnMgSSe structure in which the layers have a crystal-lattice period close to the lattice period of the GaAs substrate, the QWs are inhomogeneously doped with elements from the composition of the barrier layers. The inhomogeneity of QW composition observed in the growth of mismatched layers in ZnCdSe/ZnSSe and ZnCdS/ZnSSe structures is caused by the fact that mismatch between the lattice parameters of QWs and barriers stimulates the growth of self-consistent compositions; this occurs due to a decrease in the Cd concentration in the Zn{sub 1-x}Cd{sub x}Se QW in the initial stages of growth compared to the Cd concentration in the flow of gases and an increase in the Zn concentration in the Cd{sub 1-x}Zn{sub x}S QW at small values of x up to the concentration matching GaAs (x = 0.4). The mismatch stresses are partially relaxed via dislocations with the (111){sub II} glide planes, as a result of which is observed the combination of rotation of the crystal planes of the layers and QW around the [1 1-bar 0] axis and almost cylindrical bending of the entire sample around the perpendicular [110] axis. Mismatch between lattice parameters of the ZnMgSSe barrier layers and the substrate brings about decomposition of these layers into two phases; this decomposition is caused by thermodynamic instability of the alloy.

36 MATERIALS SCIENCE↗

Large plasticity in magnesium mediated by pyramidal dislocations

Lightweight magnesium alloys are attractive as structural materials for improving energy efficiency in applications such as weight reduction of transportation vehicles. One major obstacle for widespread applications is the limited ductility of magnesium, which has been attributed to $\langle$c+a$\rangle$ dislocations failing to accommodate plastic strain. We demonstrate, using in situ transmission electron microscope mechanical testing, that $\langle$c+a$\rangle$ dislocations of various characters can accommodate considerable plasticity through gliding on pyramidal planes. We found that submicrometer-size magnesium samples exhibit high plasticity that is far greater than for their bulk counterparts. Small crystal size usually brings high stress, which in turn activates more $\langle$c+a$\rangle$ dislocations in magnesium to accommodate plasticity, leading to both high strength and good plasticity.

Science & Technology - Other Topics↗

Microstructures and Impact Wear Behavior of Al-Alloyed High-Mn Austenitic Cast Steel After Aging Treatment

The microstructural evolution and impact wear behavior of Al-alloyed ultra-high-Mn austenitic cast steel were investigated after different heat treatments, including quenching (Q) and quenching + aging (Q + A). Another ultra-high-Mn austenitic cast steel without Al was compared under the same experimental condition. After Q + A, Al addition contributed to the precipitation of κ-carbides which improves the yield strength and wear resistance of the austenite matrix. However, the mechanical properties and wear resistance of the Al-free steel were strongly deteriorated due to the precipitation of plate-like M{sub 3}C-type carbides, as well as the worn surface of the Al-free steel had the feature of micro-scratches. After Q + A (2 h), the Al-alloyed steel obtained optimal wear resistance and the main wear feature was strain fatigue. But, excessive aging time (4 h) would lead to a large fragile peeling from the worn surface and the wear resistance was decreased. Also, the worn subsurface microstructures with different heat treatments were observed by transmission electron microscopy (TEM). These results show that the deformation microstructures of the Al-free steel contained stacking faults, dislocation tangle and deformation twins. The deformation character of Al-alloyed steel is dominated by planar glide, and with increase in the aging time, planar dislocation substructures gradually evolved, relating to dislocation pileups, Taylor lattices and micro-bands.

36 MATERIALS SCIENCE↗

Fracton-elasticity duality in twisted moiré superlattices

We formulate a fracton-elasticity duality for twisted moiré superlattices, taking into account that they are incommensurate crystals with dissipative phason dynamics. From a dual tensor-gauge formulation, as compared to standard crystals, we identify twice the number of conserved charges that describe topological lattice defects, namely, disclinations and another type of defects that we dub discompressions. Furthermore, the key implication of these conservation laws is that both glide and climb motions of lattice dislocations are suppressed, indicating that dislocation networks may become exceptionally stable. We also generalize our results to other planar incommensurate crystals and quasicrystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of the Guinier–Preston Zones on the Concentration Dependence of the Yield Point of the Aged Two-Component Alloys in Conditions of High-Speed Deformation

The glide of an ensemble of edge dislocations at the high-speed deformation of an aged binary metal alloy is theoretically analyzed. The yield stress of the alloy is a nonmonotone function of the second component concentration, which has a maximum and a minimum under certain conditions. The maximum corresponds to the transfer from the dominating influence of dislocation collective interaction on creation of a spectral gap to the prevalence of the influence of collective interaction of atoms of the second component. The minimum of the obtained curve corresponds to the transfer from the prevalence of the drag of the dislocation by the Guinier–Preston zones to the prevalence of its drag by the atoms of the second component.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal Evolution of the Proton Irradiated Structure in Tungsten–5 wt% Tantalum

We have monitored the thermal evolution of the proton irradiated structure of W–5 wt% Ta alloy by in-situ annealing in a transmission electron microscope at fusion reactor temperatures of 500–1300 °C. The interstitial-type a/2<111> dislocation loops emit self-interstitial atoms and glide to the free sample surface during the early stages of annealing. The resultant vacancy excess in the matrix originates vacancy-type a/2<111> dislocation loops that grow by loop and vacancy absorption in the temperature range of 600–900 °C. Voids form at 1000 °C, by either vacancy absorption or loop collapse, and grow progressively up to 1300 °C. Tantalum delays void formation by a vacancy-solute trapping mechanism.

36 MATERIALS SCIENCE↗

Demonstrate new plasticity models for doped UO 2 that capture dislocation mechanisms

In light water reactors, fuel vendors are investigating the use of dopants to modify the properties of UO 2 pellets, with the goal of improving pellet-cladding mechanical interactions during operation. Dopants are expected to ‘soften’ the pellets; that is, the doped pellets have higher plastic deformation than conventional UO 2 . This leads to a reduction in the severity of mechanical pellet-cladding interactions, helping to reduce the hoop strain on the cladding. By minimizing the strain exerted by the pellet on the cladding, it is anticipated that cladding performance under accident conditions can be enhanced (i.e., lowering the risk of burst during a LOCA). Dopants such as chromium (Cr) promote grain growth during pellet fabrication, leading to larger grains; therefore, understanding the link between chemistry, microstructure and mechanical deformation (enhanced creep rates) behavior of UO 2 is critical to helping operators further substantiate the benefits of doping UO 2 . Historically, the nuclear energy industry has relied on empirical models to make assessments of performance. Compared to empirical models, mechanistic physics-based models provide benefits, such as, fewer data points for validation and better extrapolation where experimental data is scarce or non-existent. In this report, Bayesian inference techniques have been applied to a previously developed lower length-scale-informed diffusional creep model. The objective is to i) infer lower-length-scale parameter distributions from available experiment and then ii) determine the uncertainties in the measurable quantity (in this case creep rates) after propagating the inferred lower length scale parameter uncertainties. The approach requires many evaluations of the model, which becomes computationally insurmountable; therefore, a neural-network model is trained to data obtained by sampling the full model over the most important parameters. This neural-network is then used in the Bayesian inference approach to determine probability distributions in the parameter values that represent the uncertainty in the model given what is known from the experiments (posterior). A significant reduction compared to conservative initial (prior) uncertainties is achieved through inference against the experimental data, demonstrating the efficacy of this approach. Furthermore, by accounting for uncertainties in the experimental conditions and sample non-stoichiometry, it is possible to resolve apparent discrepancies in experimental measurements within a self-consistent grain boundary (Coble) creep model that is sensitive to chemistry. This work has been written up and submitted to Nuclear Technology for a special issue on accelerated fuel qualification (AFQ). This uncertainty quantification (UQ) work not only improves the diffusional model, while accounting for uncertainty, but also establishes a framework which can readily be applied to the mechanistic models of dislocation deformation developed in this study. The most likely values from the Bayesian analysis are incorporated into our UO 2 diffusional creep model and a lower length scale-informed irradiation UO 2 creep mechanistic model to generate a dataset. This dataset has been provided to our INL collaborators for training an artificial neural network surrogate model, which will be implemented in the BISON fuel performance code to assess how the results differ from those currently obtained using a fully empirical model and that of using the nominal (uncalibrated) atomic scale parameters in our mechanistic model. Plastic deformation (creep and glide) in UO 2 is a complex phenomenon, governed by multiple underlying processes such as local defect concentrations, applied stresses, and microstructural characteristics. Consequently, there is a need for a meso-scale model with polycrystalline resolution capable of extrapolating to large grain sizes applicable to doped UO 2 , where data is limited and the model can help bridge the knowledge gap. By integrating atomistic data into the polycrystal LApx code, it becomes possible to predict dislocation climb and glide plasticity that simple analytical models cannot accurately represent. The application of atomic-scale data within LApx demonstrated the importance of climb and glide mechanisms in reproducing high-stress UO 2 behavior. Behaviors such as this are crucial to capture and implement in BISON, as parts of the fuel pellet can reach temperatures where glide can occur before pellet cracking. This model which captures dislocation based mechanisms for UO 2 is then used to stand up the doped model accounting for larger grain sizes. It was found that larger grain sizes can lead to enhanced deformation rates in the glide regime, and therefore can help with the pellet cladding mechanical interaction. Therefore if the fuel pellet reaches conditions (stress/temperature) where glide is active, the enhanced creep rates for larger grains in the glide regime (doped UO 2 ) can help with pellet cladding mechanical interactions. Plastic deformation in UO 2 involves multiple mechanisms, including diffusional creep, dislocation climb, and glide. This milestone contains two parts: (1) UQ of a pre-existing lower length scale informed mechanistic diffusional creep model, and (2) development of a new LApx based model for dislocation-mediated creep mechanisms in UO 2 , with application to large-grain doped UO 2 .

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Hierarchical Characterization of Deformation Heterogeneities in BCC Crystals

Deformation behavior of body-centered cubic (BCC) metals is being investigated by white beam x-ray microdiffraction to characterize the dislocation structure that results from uniaxial compression experiments. The measurements were performed on molybdenum single crystals and a tantalum bicrystal as part of a hierarchical characterization effort. Results show heterogeneities in the deformed structure and misorientation maps consistent with results obtained from Orientation Imaging Microscopy (OIM). Additionally, the technique allows for the determination of the active glide systems as well as of the dislocation densities in function of the position in the sample.

36 MATERIALS SCIENCE↗

Recombination-enhanced dislocation climb in InAs quantum dot lasers on silicon

Here, we analyze the structure of dislocations in electrically aged InAs quantum dot (QD) lasers on silicon to understand gradual device degradation. We find that misfit dislocations lengthen due to carrier injection, experiencing a combination of recombination-enhanced climb and glide processes constrained by the epitaxial structure. An examination of the dislocation geometry reveals that the climb process involves the addition of atoms to the extra half plane of the dislocation. Spontaneous emission from the QDs is also dimmer after aging. Additionally, the signature of misfit dislocations in the unaged laser, discernible as sharp dark lines in spatially resolved cathodoluminescence, is replaced by finer, more inhomogeneous contrast upon aging. We speculate that this change arises from vacancy clouds expelled from the dislocation during climb. With this insight, we evaluate the driving forces for dislocation climb that could be at play and discuss the origins of slow degradation in QD lasers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mechanics of nanoscale metallic multilayers: from atomic-scale to micro-scale

Layered composites of Cu/Nb with incoherent interfaces achieve very high strength levels. Interfaces play a crucial role in materials strength by acting as barriers to slip. Atomistic models of Cu/Nb bilayers are used to explore the origins of this resistance. The models clearly show that dislocations near an interface experience an attraction toward the interface. This attraction is caused by shear of the interface induced by the stress field of the dislocation. More importantly, atomistic simulations also reveal that interfacial dislocations easily move in interfaces by both glide and climb. Integrating these findings into a micro-scale model, we develop a three-dimensional crystal elastic-plastic model to describe the mechanical behavior of nanoscale metallic multi layers.

36 MATERIALS SCIENCE↗