Search NASA⌕ Search

SEARCH · Search NASA

Results for “distributed surface roughness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Physics of greenhouse effect and convection in warm oceans

Sea surface temperature (SST) in roughly 50% of the tropical Pacific Ocean is warm enough (SST greater than 300 K) to permit deep convection. This paper examines the effects of deep convection on the climatological mean vertical distributions of water vapor and its greenhouse effect over such warm oceans. The study, which uses a combination of satellite radiation budget observations, atmospheric soundings deployed from ships, and radiation model calculations, also examines the link between SST, vertical distribution of water vapor, and its greenhouse effect in the tropical oceans. Since the focus of the study is on the radiative effects of water vapor, the radiation model calculations do not include the effects of clouds. The data are grouped into nonconvective and convective categories using SST as an index for convective activity. On average, convective regions are more humid, trap significantly more longwave radiation, and emit more radiation to the sea surface. The greenhouse effect in regions of convection operates as per classical ideas, that is, as the SST increases, the atmosphere traps the excess longwave energy emitted by the surface and reradiates it locally back to the ocean surface. The important departure from the classical picture is that the net (up minus down) fluxes at the surface and at the top of the atmosphere decrease with an increase in SST; that is, the surface and the surface-troposphere column lose the ability to radiate the excess energy to space. The cause of this super greenhouse effect at the surface is the rapid increase in the lower-troposphere humidity with SST; that of the column is due to a combination of increase in humidity in the entire column and increase in the lapse rate within the lower troposphere. The increase in the vertical distribution of humidity far exceeds that which can be attributed to the temperature dependence of saturation vapor pressure; that is, the tropospheric relative humidity is larger in convective regions. The positive coupling between SST and the radiative warming of the surface by the water vapor greenhouse effect is also shown to exist on interannual time scales.

Inamdar, A. K.↗

An almost 'perfectly' diffuse, 'perfect' reflector for far-infrared reflectance calibration

Specular and diffuse reflectance measurements made near normal incidence of two very rough, solid aluminum surfaces are presented for the wavelength range from 2.2 to 512 microns. The diffuse measurements made at nonspecular angles by two different detectors indicate that between 33 and 201 microns the reflectance of one surface is nearly Lambertian (isotropic) with a bidirectional reflectance distribution function (BRDF) value within 32 percent of the theoretical value of (1/pi)/sr for a perfectly diffuse, perfect reflector. Photometric reflectance spectra at the specular angle show that between 6.9 and 100 microns the specular BRDF of these surfaces is within 5 percent of the theoretical value of (1/pi)/sr. At longer wavelengths of 235, 320, and 512 microns the specular reflectance rapidly departs from that of a perfectly diffuse, perfect reflector. The two samples studied have rms surface roughnesses of 44 and 60 microns. A durable metal surface with these near perfect reflectance characteristics can be advantageously used in the FIR as a black-body source, the interior surface of an integrating sphere, and most especially as an absolute calibration standard. BRDF measurements at 40 deg incidence, though still highly diffuse, show a significant departure from Lambertian reflectance.

Smith, Sheldon M.↗

Venus: Global distribution of Pioneer-Venus radar roughness and reflectivity and global correlation of altimetry, roughness and reflectivity observations

An improved version of the Pionner-Venus orbital data was used for a statistical analysis of global radar roughness and (alpha(0)) (rho) reflectivity. Classification maps of the venusian surface are produced in a supervised manner on the basis of statistical and empirical studies of the individual data sets. The primary objective is to assess the degree of homogeneity of surface radar properties within topographic provinces in order to map possible geologic boundaries. Maps were produced by correlating two data sets at a time. Classification of specific regions, such as Ishtar, has demonstrated that distinct geological units can be identified.

Head, J. W.↗

Space dust and debris; Proceedings of the Topical Meeting of the Interdisciplinary Scientific Commission B (Meetings B2, B3, and B5) of the COSPAR 28th Plenary Meeting, The Hague, Netherlands, June 25-July 6, 1990

The present conference on space dust and debris encompasses orbital debris, in situ measurements and laboratory analysis of space-dust particles, comparative studies of comets, asteroids, and dust, the protection and maneuvering of spacecraft in space-debris environments, and the out-of-elliptic distribution of interplanetary dust derived from near-earth flux. Specific issues addressed include asteroid taxonomy, the optical properties of dust from cometary and interplanetary grains, light scattering by rough surfaces on asteroidal/lunar regoliths, and the first results of particulate impacts and foil perforations on the Long Duration Exposure Facility. Also addressed are collision probability and spacecraft disposition in the geostationary orbit, a flash on the moon caused by orbital debris, the limits of population growth in low earth orbit due to collisional cascading, and the simulation of cosmic man-made dust effects on space-vehicle elements in rocket and laboratory experiments.

Kessler, D. J.↗

Earth observing satellite: Understanding the Earth as a system

There is now a plan for global studies which include two very large efforts. One is the International Geosphere/Biosphere Program (IGBP) sponsored by the International Council of Scientific Unions. The other initiative is Mission to Planet Earth, an unbrella program for doing three kinds of space missions. The major one is the Earth Observation Satellite (EOS). EOS is large polar orbiting satellites with heavy payloads. Two will be placed in orbit by NASA, one by the Japanese and one or two by ESA. The overall mission measurement objectives of EOS are summarized: (1) the global distribution of energy input to and energy output from the Earth; (2) the structure, state variables, composition, and dynamics of the atmosphere from the ground to the mesopause; (3) the physical and biological structure, state, composition, and dynamics of the land surface, including terrestrial and inland water ecosystems; (4) the rates, important sources and sinks, and key components and processes of the Earth's biogeochemical cycles; (5) the circulation, surface temperature, wind stress, sea state, and the biological activity of the oceans; (6) the extent, type, state, elevation, roughness, and dynamics of glaciers, ice sheets, snow and sea ice, and the liquid equivalent of snow in the global cryosphere; (7) the global rates, amounts, and distribution of precipitation; and (8) the dynamic motions of the Earth (geophysics) as a whole, including both rotational dynamics and the kinematic motions of the tectonic plates.

Soffen, Gerald↗

Lunar polarization studies at 3.1 mm wavelength

Observations of the distribution of linearly polarized lunar thermal emission were made at a wavelength of 3.1 mm with The University of Texas 4.88 m parabolic reflector (0.042 deg HPBW). A shadow corrected, rough surface, thermal emission model for a homogeneous moon was least-squares-fitted to the polarization data. Results indicate an effective lunar dielectric constant of 1.34 plus or minus 0.04 with surface roughness characterized by a standard deviation of 17 (plus or minus 5) deg for surface slopes with a normal probability density, independent of lunar phase. A comparison of these results with published values at other wavelengths suggests that the effective lunar dielectric constant, as obtained by lunar emission measurements, decreases with decreasing wavelength of observation. This wavelength dependence may be interpreted in terms of an inhomogeneous surface and/or a surface that possesses intermediate scale surface roughness.

White, T. L.↗

Rough surface scattering based on facet model

A model for the radar return from bare ground was developed to calculate the radar cross section of bare ground and the effect of the frequency averaging on the reduction of the variance of the return. It is shown that, by assuming that the distribution of the slope to be Gaussian and that the distribution of the length of the facet to be in the form of the positive side of a Gaussian distribution, the results are in good agreement with experimental data collected by an 8- to 18-GHz radar spectrometer system. It is also shown that information on the exact correlation length of the small structure on the ground is not necessary; an effective correlation length may be calculated based on the facet model and the wavelength of the incident wave.

Khamsi, H. R.↗

Interpretation of observed cosmic microwave background radiation

It is argued that the 'surface of last scattering' of the observed microwave background radiation corresponds to the distribution of dust in galaxies or protogalaxies with a temperature of about 110 K at the epoch corresponding to Z roughly equal to 40. This is in contrast with the plasma temperature of over 3,000 K at an earlier epoch (Z greater than about 1,000), as given by the canonical model of big bang cosmologies. In view of this, the claim that the microwave background radiation lends strong support to hot big bang cosmologies is without foundation.

Alfven, H.↗

The forward scattering of microwave solar radiation from a water surface

The forward scattering of microwave solar radiation from both smooth and rough water surfaces is computed. The smooth surface is assumed specular, and the rough surface is represented by a two-scale surface, for which two small-scale perturbation parameters, 0.10 and 0.25, are considered. The contribution of the scattered sunlight to the antenna temperature is found using the scalar approximation, and the results are compared with radiometer measurements. The overall agreement is good, but in some cases the smooth-surface measurements are higher than the computations. This discrepancy possibly indicates an absolute calibration error or a slight misalignment of the antennas' boresights. The computations for the two perturbation parameters bracket the rough-surface measurements except when the sun's mirror image is far removed from the boresight direction. The small disagreement in this case may be due to a peaked large-scale slope distribution.

Wentz, F. J.↗

Measuring Skew in Average Surface Roughness as a Function of Surface Preparation

Characterizing surface roughness is important for predicting optical performance. Better measurement of surface roughness reduces grinding saving both time and money and allows the science requirements to be better defined. In this study various materials are polished from a fine grind to a fine polish. Each sample's RMS surface roughness is measured at 81 locations in a 9x9 square grid using a Zygo white light interferometer at regular intervals during the polishing process. Each data set is fit with various standard distributions and tested for goodness of fit. We show that the skew in the RMS data changes as a function of polishing time.

Stahl, Mark T.↗

Measuring Skew in Average Surface Roughness as a Function of Surface Preparation

Characterizing surface roughness is important for predicting optical performance. Better measurement of surface roughness reduces polishing time, saves money and allows the science requirements to be better defined. This study characterized statistics of average surface roughness as a function of polishing time. Average surface roughness was measured at 81 locations using a Zygo white light interferometer at regular intervals during the polishing process. Each data set was fit to a normal and Largest Extreme Value (LEV) distribution; then tested for goodness of fit. We show that the skew in the average data changes as a function of polishing time.

Stahl, Mark↗

Experimental Reexamination of Transverse Tensile Strength for IM7/8552 Tape-Laminate Composites

Due to the observed dependence of transverse-tensile strength, YT, on test geometry and specimen size, there is no consensus regarding a test method that can uniquely measure YT. This study reexamines characterization of YT by comparing results from established flexure tests with results from a new tensile test that exhibits consistent failure in the gage region. Additionally, the effects of surface preparation and direction of transverse fracture are investigated. Results show that YT is inversely proportional to specimen volume and surface roughness, and is insensitive to direction of transverse fracture. The relationship between specimen volume and YT is adequately captured by Weibull strength-scaling theory, except at the tails of the YT distributions. However, specimens exhibited microcracking prior to failure, which violates the “weak-link” assumptions of the Weibull theory. These findings highlight the challenges of using deterministic YT values in progressive damage analysis.

Arndt, Caitlin M.↗

Laws of effluent dispersion in the steady-state atmospheric surface layer in stable and unstable conditions

The two-dimensional diffusion equation has been solved by an integral method to obtain the distribution of ground-level concentration of an inert effluent emitted from a semi-infinite area source in a steady-state and horizontally homogeneous atmospheric surface layer. Mean wind velocity and eddy diffusivity profiles derived from empirically determined flux-profile relations of Businger et al. (1971) for stable and unstable surface layers were used. It is found that concentration as a function of downwind distance can be described by a simple formula over distances of practical interest in surface layer dispersion. Corresponding results for a cross-wind infinite line source are obtained by simple differentiation. The concentration distribution is completely determined by the friction velocity, the Monin-Obukhov length, the roughness length, and the effluent source strength. The generalization of the integral method needed to obtain accurate solutions of the diffusion equation with the given wind velocity and diffusivity profiles is discussed in an appendix.

Lebedeff, S. A.↗

A microwave scattering model for layered vegetation

A microwave scattering model was developed for layered vegetation based on an iterative solution of the radiative transfer equation up to the second order to account for multiple scattering within the canopy and between the ground and the canopy. The model is designed to operate over a wide frequency range for both deciduous and coniferous forest and to account for the branch size distribution, leaf orientation distribution, and branch orientation distribution for each size. The canopy is modeled as a two-layered medium above a rough interface. The upper layer is the crown containing leaves, stems, and branches. The lower layer is the trunk region modeled as randomly positioned cylinders with a preferred orientation distribution above an irregular soil surface. Comparisons of this model with measurements from deciduous and coniferous forests show good agreements at several frequencies for both like and cross polarizations. Major features of the model needed to realize the agreement include allowance for: (1) branch size distribution, (2) second-order effects, and (3) tree component models valid over a wide range of frequencies.

Karam, Mostafa A.↗

Regimes of traction in concentrated contact lubrication

Experimental evidence is presented for the existence of three regimes of traction in concentrated contacts. Data are obtained in a rolling contact simulator by varying the lubricant, temperature, rolling speed, load and surface roughness at a fixed slide-to-roll ratio. At lower thicknesses the mixed regime is encountered, and traction is increased due to asperity interaction, while at higher film thicknesses, the lubricant pressure is distributed over a greater area than the Hertzian region, resulting in a lower average pressure and reduced traction.

Bair, S.↗

Surface roughness effects in elastohydrodynamic contacts

Surface roughness effects in full-film EHL contacts were studied. A flow factor modification to the Reynolds equation was applied to piezoviscous-elastic line contacts. Results for ensemble-averaged film shape, pressure distribution, and other mechanical quantities were obtained. Asperities elongated in the flow direction by a factor exceeding two decreased both film shape and pressure extrema at constant load; isotropic or transverse asperities increased these extrema. The largest effects are displayed by traction, which increased by over 5% for isotropic or transverse asperities and by slightly less for longitudinal roughness.

Tripp, J. H.↗

Analysis of a two row hydrostatic journal bearing with variable properties, inertia effects and surface roughness

A computer algorithm for simulation of hydrostatic journal bearing pressure-flow behavior has been generated. The effects taken into account are inertia, cavitation, variable properties (isothermal bearing) and roughness. The program has been specifically tailored for simulation of the hybrid bearing of the cryogenic turbopumps of the main shuttle engine. Due to the high pressure (515 psia) of the supply line no cavitation has been found. The influence of the roughness effects have been found to become important only when the surface-roughness order of magnitude is comparable with that of the bearing clearance itself. Pocket edge inertia and variable properties have been found to have quite an important influence upon the pocket pressure, field pressure distribution and lubricant mass flow.

Braun, M. J.↗

Measuring Thermal Conductivities Of Rough Specimens

Thermal conductivity of irregularly surfaced specimen measured more accurately and reliably by use of heat-transfer adhesive establishing contact between specimen and reference standards. Method useful when specimen made up of fragments of material. Adhesive ensures good thermal contact to pieces not matching others in height. In rough-surfaced or unequally sized specimens, heat-flow pattern becomes distorted, and temperatures at measurement points do not accurately represent those throughout reference standards and specimen. Filling voids with conductive adhesive restores nearly uniform distribution heat flow.

Striepens, Aloys H.↗