Search NASA⌕ Search

SEARCH · Search NASA

Results for “domestication”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Stabilizing the Grid and Reducing Utility Bills Through Price-Responsive Controls for Heat Pump Water Heaters

The electricity grid is facing increasing challenges in cost-effectively balancing supply and demand. These challenges are exacerbated by increased penetration of photovoltaics, which causes mid-day overproduction, and electrification of gas appliances, which increases peak-period electricity demand. Decarbonization requires shifting building loads from fossil-intensive high-cost times to renewable-intensive low-cost times while maintaining quality of service to occupants. Utilities and ISO’s are investigating new ways of incentivizing this load shifting. One promising method is the use of Highly Dynamic Prices (HDPs). HDPs feature continuously changing prices that reflect real-time grid generation and distribution costs and capacity constraints, and thus incentivize consumers to shift their loads. California’s CPUC CalFUSE proposal and Hawaii’s recent changes demonstrate that electricity tariffs are moving towards this model. For this to work however, loads must have the capability to respond to these prices. Heat pump water heaters (HPWHs) are an ideal device for this purpose because their storage tanks decouple delivery of domestic hot water from electricity consumption. The storage enables control strategies that consume midday solar power to increase the energy stored in the tank, then provide evening peak domestic hot water services using the stored energy. Berkeley Lab's CalFlexHub project is pioneering price-driven load flexibility by developing and deploying cost-minimizing controls for many flexible loads - including HPWHs - in response to HDP. Control development is based on simulations using the Flexible Heat Pump Water Heater Performance Predictor which captures the control decisions of the on-board controller in a residential, integrated HPWH . The price-responsive controls a) shift load in ways that consume additional midday solar power to help stabilize the grid and reduce overall emissions, b) ensure that occupants receive equal or better hot water delivery service, and c) minimize the operating cost for each home in the fleet. On the grid level, the resulting shift will reduce utility operating costs and emissions, and can avoid expensive system capacity expansions. The control approach is customized to each home based on typical hot water consumption patterns. HPWH controllers, whether on the device or remotely, will receive a schedule of CTA-2045-B signals or set temperature adjustments customized to the current HDP price schedule and home. Simulation results for a fleet of 148 HPWHs on a summer day in Berkeley, California show cost savings of 29% and high price electricity consumption reductions of 80%, while maintaining full quality of service.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Sustainable Aviation Fuel (SAF) State-of-Industry Report: State of SAF Production Process

GHG emissions related to commercial air travel were already significant, at 10% of the domestic transportation emissions and 3% of the global greenhouse gas emissions prior to the pandemic, and are expected to double by 2050, even with modest projected growth in air travel. Since Sustainable Aviation Fuel (SAF) is the only way that medium to long haul commercial aviation can be decarbonized, a US government wide "SAF Grand Challenge" was issued to encourage industry to develop capabilities to produce SAF, to reduce cost, improve sustainability, build value chains, and to scale production capabilities (1). The targets are to expand current domestic SAF 2022 production by 200X to 3 billion gallons per year by 2030, and then further by 12X to 35 billion gallons by 2050, while achieving life cycle GHG reduction of 50% relative to fossil Jet A. Following the SAF Grand Challenge, the DOE, USDA, EPA and FAA collaboratively developed a comprehensive strategy, outlined in the "SAF Grand Challenge Roadmap" (2), to inform stakeholders of the actions necessary to achieve the above volumetric targets. The purpose of this study is to provide an assessment of the current state of the SAF production industry and identify challenges and hurdles that industry may face in delivering the 2030 goals. This assessment is for the potential feedstocks and conversion pathways expected to contribute to 2030 goals and will generally follow action areas in the SAF Grand Challenge: feedstocks, conversion technology, supply chain, and policy & valuation.

09 BIOMASS FUELS↗
DOE OSTI2024

Advanced Reactor Safeguards & Security 2024 Program Roadmap

The Advanced Reactor Safeguards and Security (ARSS) program was established to provide research support addressing near term challenges that advanced nuclear reactor vendors face in meeting domestic Material Control and Accounting (MC&A), Physical Protection System (PPS), and Cybersecurity requirements for U.S. construction. The technical work in the program is meant to (1) support nuclear reactor vendors with advanced MC&A, PPS, and Cybersecurity designs for next generation reactors, (2) provide technical bases for the regulator, and (3) promote the integration of Safeguards and Security by Design early in the design process. Existing domestic regulations for safeguards and security, as outlined in the Code of Federal Regulations, were written for large light water reactors, and rule-making efforts are underway to develop regulations more suited to different reactor designs. The ARSS program seeks to remove roadblocks in the deployment of new and advanced reactors by solving regulatory challenges, reducing safeguards and security costs, and utilizing the latest technologies and approaches for robust plant monitoring and protection. This roadmap discusses the goals of the ARSS program, current research, and program plan for the next five years.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Business Opportunities in Clean Energy Supply Chains: Guidebook for Small and Medium-Sized Automotive Suppliers

This is the final report for the referenced TCF award which ran from Oct. 2019 through Jan. 2024 in conjunction with the industry partner Swift Solar. The long duration of the program was due to several factors including the pandemic and a technical work stoppage due to changes in the scope. Additionally, Swift’s business focus shifted during the course of the program. As a result of these factors, this program underwent two distinct modifications that dramatically changed the work scope. The following report is organized into three separate sections, each of which addresses a distinct work scope. Those scope changes, what necessitated them, and any new tasks/milestones are given, briefly, at the top of each section. The work performed was research on the hybrid halide perovskites (HHP), both the absorber material itself as well as other material layers that are required in a full device stack. At the start of the period of performance, there were two distinct challenges that we sought to address: (1) a wide band gap absorber (>1.6 eV), and (2) a recombination layer for tandem devices that provided good sequestration of the individual cell absorber materials in their respective device layers. NREL had previously published, and patented, advancements in both of these areas and they were the focus of much of the work throughout the program. The auto manufacturing space is evolving quickly. Sales of various electrified vehicles (xEVs) continue to grow steadily, which has medium to long-term ramifications for the thousands of U.S. manufacturers and hundreds of thousands of workers that contribute to the domestic automotive supply chain. In tandem with this growth in xEV sales, domestic clean energy manufacturing is surging (both for the xEV supply chain and other technologies), with public incentives spurring billions in private sector investment. Moreover, the next 2–3 years will see new and expanded industrial facilities come online to make products like hydrogen electrolyzers, solar panels, batteries, advanced electronics—and will create new supply chain needs and business opportunities as they do. DOE’s Office of Manufacturing and Energy Supply Chains (MESC) and Argonne National Laboratory developed this report to help automotive manufacturers—alongside various business support partners— understand these trends and their response options, and to make the most of current federal assistance programs for manufacturers. These market changes may create opportunities for small- and medium-sized manufacturers (SMMs) to expand production, grow profit margins, and diversify their businesses. For instance, SMMs could take advantage of engineering and process design similarities with new end-use industries that might enable greater business growth and stability as markets continue to change.

14 SOLAR ENERGY↗
DOE OSTI2024

Development Results on Replacement Materials for Current Scarce or High Supply Chain Risk Materials

In September 2020, the U.S. government issued an executive order to address the threat to the domestic supply chain from its reliance on critical minerals (CMs) from foreign competitors and to support the domestic mining and processing industry. The Advanced Materials and Manufacturing Technology (AMMT) program is addressing this executive order by evaluating advanced manufacturing (AM) and its impact on the demands of CMs for energy production in general and how the deployment of AM in nuclear energy will support the projected goals of the Paris Accord and further a net-zero carbon economy (NZE) by 2050. Three strategic reports were previously prepared by the AMMT program to date and identified two areas for more detailed exploration: (1) the replacement of high-risk CMs such as cobalt and niobium by more abundant minerals and (2) the minimization and utilization of CM waste streams. The design of nuclear materials without critical elements as alloying elements, is a part of the nuclear materials strategy to overcome the critical minerals scarcity. In this report, two approaches are evaluated namely (1) replacement of critical elements as alloying elements in nuclear materials, and (2) the design of a new alloys that does not contain critical minerals as an alloying element.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Manufacturing and Additive Design of Electric Machines by 3D Printing (MADE3D) (Final Technical Report)

As the U.S clean energy transition hinges on the growth of offshore wind, this is expected to be a major driver for innovations in manufacturing, material and design advancements to enable robust and cost-competitive wind turbines. The race to build larger and taller turbines rated 10 megawatts (MW) and beyond, has intensified pressure on OEMs in terms of logistics of handling and transporting large wind components, securing critical raw material as well as scaling up necessary domestic production infrastructure to meet the demand. There is increased interest in building lightweight, more efficient, and high-power dense drivetrains that will ease the burden on installation, minimize the raw material demand, increasing domestic sourceability. Despite good efficiency and reliability, existing drivetrain technologies such as direct-drive permanent magnet generators are heavy (> 300 tons), expensive, and often rely on large quantities of rare-earth permanent magnets (PMs), steel and copper.

17 WIND ENERGY↗
DOE OSTI2024

Microbial Reduction of Manganese Oxides From AMD Solids for the Biomining of Critical Minerals / Rare Earth Elements

Abandoned Coal-Mine Drainage (AMD) is a source of critical minerals (CMs) that can be biomined to increase domestic CM production for the growing tech industry while mitigating current AMD hazardous waste. Pennsylvania has ~11,000 abandoned mines, ~500 of which are currently being treated with passive remediation systems (PRS), designed to increase the pH and precipitate AMD waste onsite. Manganese (Mn) that precipitates from AMD waste can co-precipitate with CMs, and the Mn and CMs will accumulate on the PRS solids over the treatment period. This results in high Mn/CM solids that could produce a valuable leachate if resolubilized. Mn reduction and solubilization can occur through microbial driven geochemical changes such as the acidification of the environment, and it is expected that Mn resolubilization will lead to a co-resolubilization of the CMs. Investigation and stimulation of this microbial resolubilization could result in an affordable CM release process that does not require chemical additives into the environment. However the microbial mechanisms that contribute to Mn resolubilization are poorly understood. Here, we have isolated bacteria capable of resolubilizing Mn from AMD PRS. Five of the bacteria isolates have been identified as Bacillus spp. and two as Corynebacterium spp. that ferment glucose to reduce/solubilize Mn MnO2 by acidogenesis. The bacterial isolates are also capable of solubilizing Mn and CMs (Y, Zr, Sb, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, and Lu) from AMD PRS precipitated solids through their production of organic acids. Determining the microbial metabolism and genes involved in the resolubilization of manganese is crucial to optimize the biomining of CMs from AMD solid precipitants. This work addresses the growing need to develop novel CM recovery methods from domestic sources.

critical minerals↗
DOE OSTI2024

Analysis of Supply Chain Challenges in the U.S. Solar Industry: Focus on Build America, Buy America Act and Inverter Supply Issues

The United States (U.S.) solar industry has been undergoing significant transformation, driven largely by meeting U.S. climate goals while simultaneously maintaining national security. At the forefront of this movement is the Inflation Reduction Act (IRA) and the Build America, Buy America (BABA) Act. The IRA has driven investment in clean energy generation deployments while the BABA Act, enacted under Division G, Title IX of the Infrastructure Investment and Jobs Act (IIJA) establishes domestic content procurement preference for all federal financial assistance obligated for infrastructure projects. While these pieces of legislation aim to reduce reliance on foreign-made solar components and increase domestic production, the sector continues to face notable supply chain challenges. These are particularly pronounced with inverters, a critical component in solar photovoltaic (PV) systems. This report explores the current state of these supply chain challenges, with a specific focus on the impact of the BABA requirements and the associated complexities in inverter manufacturing and supply.

14 SOLAR ENERGY↗
DOE OSTI2023

UNrealized Critical Lanthanide Extraction from Sea Algae Mining (UNCLE SAM)

The UNCLE-SAM project, under the Biotechnologies to Ensure a Robust Supply of Critical Materials for Clean Energy program, examined the biomining applications of seaweeds for sustainable, domestic production of critical mineral feedstocks. The ocean is a vast reserve of mineralogical wealth including rare earth elements (REEs) and platinum group metal (PGMs). These elements, categorized as “critical minerals”, are used in telecommunication devices, lasers, LED lighting, turbine generators, electric car motors, jet engine alloys, and many other applications. These critical elements are increasingly vital to a thriving, efficient and sustainable society. However, only a few countries in the global market currently produce and export REEs, leading to potential geopolitical supply disruptions. Marine macroalgae, often referred to as seaweeds, bioconcentrate critical minerals from seawater, including REEs and PGMs. Marine algae cultivation can generate a significant amount of biomass with minimal freshwater, fertilizer, and land requirements. In summary, the UNCLE-SAM project successfully evaluated the technological feasibility for marine macroalgal cultivation as a feedstock for critical minerals, explored the biological capacity of different seaweeds to provide economically relevant domestic mineral production, assessed processing techniques for thermal co-conversion of seaweeds into renewable fuel and mineral feedstocks, and executed techno-economic and lifecycle assessments for identifying the most critical gaps in our current understanding to move the technology into commercially relevant deployment. Further development of this technology could transform the bioproduct and REE mining industries and catalyze the development of a more sustainable future.

09 BIOMASS FUELS↗
DOE OSTI2025

Rapid Sensing to Facilitate Purification of Rare Earth Element-Containing Process Streams Produced Through Membrane-Assisted Solvent Extraction

The development of an economically competitive domestic supply of rare earth elements and yttrium (REY) is necessary for our nation’s economic growth and national security. The achievement of a secure domestic supply of REY requires not only the development of effective processes for recovery of REY from naturally occurring materials and/or recycled products, but also the development of downstream processes for the ultimate production of high-REY content solids. An impediment to the development of such processes is the scarcity of analytical methods that provide rapid determination of the process stream compositions. In this work, a membrane-based extraction process was used to selectively recover REYs from a dilute solution in the presence of much higher concentrations of Ca and Al. In tandem, the use of a portable spectrometer equipped with an immobilized zinc adeninate benzene tricarboxylate metal-organic framework sensing material makes possible the rapid detection of the presence of ppm concentrations of Tb and Eu in both weakly acidic and strongly acidic process streams within minutes. A solvent extraction processing time of 15-60 min maximized REY selectivity over gangue ions while achieving up to 80% REY and minimal gangue ion recovery. Taken together, these experiments highlight not only an innovative method for REY purification but also the importance of inexpensive, portable characterization methods for near real-time analysis of REY content.

Membrane-assisted solvent extraction↗
DOE OSTI2025

Bacterial Biomining Rare Earth Elements in Abandoned Coal Mine Drainage: Solubilization and Sequestration

Bacteria can be used to biomine rare earth elements (REEs) domestically from abandoned coal-mine drainage (AMD) solids. Pennsylvania has ~11,000 abandoned mines, with ~500 AMD passive remediation systems that precipitate AMD REE rich solids onsite. In passive systems, REEs, co-precipitate with manganese (Mn), accumulating as solids that can produce a valuable leachate when resolubilized. REEs like lanthanum (La) are used in battery technology. Microbial metabolic changes that co-resolubilize Mn and REEs could result in an affordable release process that does not require chemical additives and the select sequestering of REEs like La allow for the selective purification from a mixed REE composition. Currently, the microbial mechanisms that contribute to mass REE resolubilization and selective sequestration are poorly understood. We have isolated bacteria (Bacillus mycoides JR07 and Bacillus pseudomycoides KB7) that solubilize Mn oxide, La oxide, and AMD solids by acidogenesis. We have determined that isolates JR07 and KB7 solubilize the La from AMD PRS solids by their production of organic acids. Preliminary results show methylotrophic bacterial isolate B3 can take up soluble La(III), giving an avenue to purification of La from a rich REE leachate. Determining the microbial metabolism and genes involved in the mass resolubilization of REEs and selective biomining of La(III) is crucial to optimize the biomining of AMD solids. Our work addresses the growing need to develop novel REE recovery methods from domestic sources.

microbiology↗
DOE OSTI2025

Microbial Biomining for the Release and Recovery of Rare Earth Elements in Abandoned Coal Mine Drainage

Microbes can be used for biomining rare earth elements (REEs) from abandoned coal-mine drainage (AMD) solids. Domestically Pennsylvania has ~11,000 abandoned mines, with ~500 AMD passive remediation systems (PRSs) that precipitate REE rich solids. In passive systems, REEs, co-precipitate with manganese (Mn), accumulating as a valuable leachate when resolubilized. REEs like lanthanum (La) are used in battery technology. Microbial metabolism that co-resolubilize Mn and REEs could result in an affordable release process that does not require the addition of hazardous chemical additives. Microbial sequestering of La can be used for selective purification from a mixed REE composition. Currently, the microbial mechanisms that contribute to mass REE resolubilization and selective sequestration are poorly understood. We have isolated bacteria (Bacillus mycoides JR07 and Bacillus pseudomycoides KB7) that solubilize Mn oxide, La oxide, and AMD solids by acidogenesis. Preliminary results show methylotrophic bacterial isolate B3 can take up soluble La, which may have a potential application in the purification of La from a mixed REE leachate. Determining the microbial metabolism and genes involved in the REE resolubilization and selective biomining of La is crucial to optimize the biomining of AMD solids. Our work addresses the growing need to develop novel REE recovery methods from domestic sources.

microbiology↗
DOE OSTI2025

Diversion Path Analysis: A Proposed Methodology to Develop an MC&A Approach for Liquid-Fueled Molten Salt Reactors

Nuclear material control and accounting (MC&A) is a critical element of both the US Nuclear Regulatory Commission (NRC) and US Department of Energy (DOE)’s domestic safeguards and security requirements. NRC licensees are required, under Title 10 of the Code of Federal Regulations (10 CFR) Part 74 to establish and maintain an MC&A program that captures and records the quantities and locations of special nuclear material (SNM) at the facility. Along with physical protection, MC&A is a key element of domestic nuclear material safeguards that enables the NRC to ensure that SNM is controlled and accounted for. SNM, per 10 CFR Part 74, refers to plutonium, 233 U, and uranium enriched in the isotope 233 U or 235 U, but does not include source material. Periodic physical inventories, coupled with material balance evaluations, are effective and demonstrated tools to account for and detect theft or diversion of SNM in facilities containing SNM in bulk material form (i.e., not in discrete, countable items). Historically in the United States, these types of facilities have included fuel fabrication, conversion, and enrichment facilities. In comparison, reactors have relied on item counting of assemblies and control of SNM while in containment (e.g., a sealed reactor pressure vessel) because, to date, reactor fuel has been in item form. In liquid-fueled molten salt reactors (MSRs), unlike traditional light water reactors (LWRs) or bulk facilities, bulk SNM quantities can change significantly during operation as a result of depletion and transmutation. This introduces challenges to the use of traditional periodic physical inventories and material balance evaluations to detect theft or diversion of SNM in reactors that use SNM in bulk material form. Liquid-fueled (i.e., salt-fueled) MSR facilities are MSRs that use SNM within a salt eutectic as the fuel. The SNM is in a bulk material form any time it is outside of fresh or spent fuel storage containers. Some examples of when SNM will be in bulk form in the facility are during addition of fuel to the reactor system, while fuel is circulating in operation, and while fuel is in a drain tank. Periodic physical inventories and material balance evaluations can likely be effectively applied to many portions of an MSR facility, including all areas where depletion and transmutation are not significantly changing the quantities of SNM within the control area. Within an MSR facility, this would include fresh fuel receipt and loading, waste streams that may contain SNM, irradiated fuel storage outside of the reactor core, and any irradiated fuel processing that may happen after SNM has been removed from the reactor. All of these process steps could rely on measurements of SNM quantities compared with documented inventories. Any discrepancies from predicted (i.e., book) inventories and measured inventories could be quantified as inventory differences, consistent with traditional MC&A guidance from the NRC (e.g., in NUREG-1065 Revision 2, NUREG-2159 Revision 1, and RG 5.29 Revision 2). Within the reactor system, additions and removals to the book inventory include depletion of the SNM (e.g., fission of 235 U), which complicates the use of physical inventories. SNM control, however, can also likely be effectively applied to detect theft of SNM throughout a liquid-fueled MSR facility. To complement these approaches, prior technical reports have identified that a diversion path analysis may be a useful, risk-informed, and performance-based tool to determine suitable elements of an MC&A approach for the reactor system within a liquid-fueled MSR facility.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Leveraging Existing Bioenergy Data: Workshop Summary Report

The U.S. Department of Energy’s (DOE’s) Office of Energy Efficiency and Renewable Energy (EERE) invests in a diverse portfolio of technologies to ensure domestic energy security, continued economic competitiveness, environmental sustainability, and the availability of cleaner fuels and power. The mission of EERE’s Bioenergy Technologies Office (BETO) is to develop transformative and revolutionary sustainable bioenergy technologies for a prosperous nation. BETO develops technologies that convert domestic biomass and waste resources into fuels, products, and power to enable affordable energy, economic growth, and innovation in renewable energy and chemicals production. This report summarizes the input received from attendees of the public workshop sponsored by BETO on July 21–23, 2020, as well as input received from a Request for Information (RFI) run in August and September 2019.

09 BIOMASS FUELS↗
DOE OSTI2025

Securing the Modern Grid: Federal Investments, Digitization, and Supply Chain Strategy

Across the United States (U.S.) grid expansion and modernization is underway, paving the way for accelerated load growth and intelligent resource management. Digitization of the grid is supported by several state and federal programs, providing support for utilities installing advanced metering infrastructure (AMI), AI-powered analytics systems, battery energy storage systems (BESS), and distributed energy resource management systems (DERMS) to transform the grid from a one-way power delivery system into an intelligent, responsive network that will enable faster load growth and power expansion of data centers for advanced artificial intelligence (AI) applications. The digital transformation of America's grid presents opportunity for increased efficiency and resiliency but also introduces new digital risks that require careful management. Digital equipment often contains several vulnerabilities such as unencrypted communication protocols, and persistent remote access capabilities that could be exploited to manipulate device settings, coordinate service disruptions, or inject false data into grid operations. These digital risks become particularly important as the grid must rapidly scale to support AI-driven data centers, which the administration has identified as essential for maintaining U.S. technological leadership and economic competitiveness. These vulnerabilities are compounded by supply chain realities: Chinese manufacturers currently produce 70-90% of essential grid components including inverters, batteries, and control systems, with the U.S. lacking domestic manufacturing capacity for critical assets like extra-high voltage transformers. Recent federal legislation has established Foreign Entity of Concern (FEOC) restrictions to address these risks, requiring projects to achieve escalating thresholds of non-FEOC content to receive tax credits while utilities work to expand sourcing channels for their supply chains and strengthen security measures. These restrictions arrive precisely when utilities face unprecedented electricity demand growth driven by the rapid growth in data centers, creating a considerable challenge: rapidly expanding infrastructure while navigating complex compliance requirements while lacking viable alternatives for many critical components. Idaho National Laboratory (INL) and its partners have developed practical approaches to help utilities navigate these intersecting challenges as they leverage federal investment to strengthen and grow the grid. These solutions include Cyber-Informed Engineering (CIE) principles that build resilience directly into systems, the Cirrus tool for secure cloud migration, and enhanced procurement guidance that embeds security requirements throughout equipment lifecycles. Federal initiatives, such as the Technical Assistance for Digital Assurance (TADA) project, provide direct support to utilities implementing these approaches while facilitating knowledge sharing across the industry. While these tools and frameworks cannot eliminate all risks inherent in foreign supply chain dependencies, they offer pragmatic pathways for strengthening security posture without sacrificing the deployment momentum essential to meeting surging electricity demand. Ultimately, securing America's digital energy infrastructure demands dedicated coordination across multiple fronts: building domestic supply chains, implementing robust digital assurance practices, and maintaining the aggressive modernization timeline necessary for reliability, resilience, and energy independence.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2026

CdTe Core: Final Technical Report (FTR)

CdTe is presently the cost-leading thin-film PV technology, directly competing with Si at scale, even when domestically manufactured. While an impressive technology, its efficiency remains much below the detailed balance limit with the largest cause due to its low photovoltage and fill factor. To realize gains, the carrier concentration, minority carrier lifetime, and interface recombination all need to be improved simultaneously over historic levels. Using a new defect chemistry (group V doping instead of copper) has been identified as a viable route using single crystal systems. This project focused on implementing this new defect chemistry in scalable, polycrystalline thin-film photovoltaic CdTe devices with tasks focusing improvements to the front interface, absorber, and rear interface as well as capability development & stakeholder engagement. The goal of the project was to establish a strategy using devices, test structures, detailed characterization, and modeling to quantify the sources of losses in state-of-the-art CdTe photovoltaic devices. Using this strategy and advanced synthesis, losses at the front interface, absorber, and rear interface were worked on in parallel. The final objective was to significantly improve the voltage deficit in CdTe devices to enable improvements in photovoltage and efficiency that can be implemented by industry in the near-term. Over the course of the project, the team developed new characterization techniques, analysis, and modeling which were then applied to state-of-the-art materials generated internally and collaboratively. In particular to enable rapid progress, NREL worked closely with First Solar where NREL grew complete devices as well as ones that interleaved process steps where First Solar had completed different steps such as absorber growth or absorber growth and activation using their baseline methods. Using detailed characterization and analysis including photoemission, photoluminescence, and scanning probe techniques enabled understanding of the loss pathways and area for improvements in our own and First Solar s materials. Ultimately, this contributed to the first series of new world record CdTe efficiencies since 2016, culminating in a 23.1% certified cell that was P-doped along with As-doped cells of similar performance. Internally, NREL improved the statistical variation in baseline As-doped devices and improved average photovoltage by over 100 mV. This was done through an improvement in absorber quality, changed front interface, and improved back contact. In addition to materially improving the fabrication processes at NREL, characterization, analysis, and modeling were developed and disseminated. NREL also played a pivotal role in community building over the course of this project working closely with the Cadmium Telluride Accelerator Consortium. NREL worked in a series of collaborations with academic and industry partners, leveraging knowledge and innovations from this project, as well as helped organize a series of workshops to ensure rapid progress in the field. Working closely with the academic community has led to a dissemination of knowledge; working with First Solar as increased US competitiveness First Solar expanded domestic production to ~10 GW and opened new facilities.

14 SOLAR ENERGY↗
DOE OSTI2026

Coalition for Community-Supported Affordable Geothermal Energy Systems (C2SAGES)

The C2SAGES project evaluated the feasibility of a community geothermal system for the planned Windy Ridge affordable housing development in Hinesburg, Vermont. Led by GTI Energy with Vermont Gas Systems, LN Consulting, NREL, and Frontier Energy, the work assessed technical design, energy performance, costs, business models, community engagement, maintenance, workforce development, and permitting. The proposed system was designed to serve 100% of the development’s heating, cooling, and domestic hot water loads. Compared with a baseline using air-source heat pumps and natural gas water heating, the geothermal system was estimated to reduce HVAC and domestic hot water energy use by about 45% to 48%, lower operating and maintenance costs, and reduce 30-year life-cycle costs by 37% for Phase 1 and 10% for Phase 2. Technical testing and modeling indicated that the Windy Ridge site is suitable for a community-scale geothermal system. The project also developed borehole field layouts, piping concepts, pump house designs, controls, maintenance plans, and supporting engineering drawings. The business model analysis found that first cost, ownership structure, and customer affordability remain major deployment challenges. Utility-led maintenance and operation were viewed favorably, but traditional utility cost-recovery models may require subsidy or revised financing structures to be practical for affordable housing. Community engagement highlighted the need for clear public education, transparent financing, reliable long-term maintenance, trained technicians, and the potential to pair geothermal systems with weatherization. Overall, the report concludes that community geothermal is technically feasible and offers meaningful energy, emissions, and life-cycle cost benefits, but broader deployment will depend on workable financing models and workforce readiness.

15 GEOTHERMAL ENERGY↗
DOE OSTI2025

Chelation ion chromatography as an automated, and cost-effective analytical technique for REE determination: method development and applications

Rare earth elements (REEs), as critical minerals, have important uses in modern energy and technologies, yet are vulnerable to potential supply chain disruptions. To establish domestic REE supply chain, efficient REE detection methods for resource characterization and mineral processing will be needed to accelerate innovations for domestic REE recovery. This study developed a rapid, novel, and cost-effective for REE detection method using ion chromatography (IC) for aqueous samples. Various REE-targeted eluent gradients and post-column agent compositions were tested on the chelation ion chromatography (CIC) with UV-vis detector for optimal separation and quantification of REEs within approximately 20 min. The single-channel pump to deliver the post-column solution to UV-vis detector was replaced with a 4-channel gradient pump, to increase operation and maintenance efficiencies. After method optimization, resulting calibration curves for more than ten REEs achieved high coefficients of determination (R2>0.999) and low relatively standard deviations (below 3.24%), demonstrating sub-ppm level detection limits (0.0897 to 0.1149 mg/L). The reliability of the CIC method was validated through comparison with inductively coupled plasma mass spectrometry (ICP-MS), showing strong agreement in REE recovery from certified standards. The impact of metal ions and salts on REE recovery using CIC was also systematically investigated. CIC consistently exhibited reliable performance in the presence of salt solutions such as NaCl and Na₂SO₄ (up to 10,000 mg/L). Our study also found the presence of high concentrations of Al ions (at 10,000 mg/L) significantly influenced REE determination, and elevated concentrations of Ca ions affected the recovery of specific REEs, including La, Ce, and Pr. The CIC method was further tested on REE-containing eluents from solvent extraction tests out of fly ash leachates. REE detection from these real processing fluids were reported to achieve 90% to 100% recovery rate from our IC method, compared to ICP-MS results. This study underscores the potential of CIC as a reliable and efficient alternative for REE determination in complex matrices. It also highlights the importance of minimizing select interfering metal ions in solutions to ensure accurate results. The REE CIC method presents a promising, low-maintenance, salt-tolerant, and cost-effective alternative to traditional analytical methods for REE analysis.

detection of rare earth elements (REE)↗