Search NASA⌕ Search

SEARCH · Search NASA

Results for “dynamic performance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

High-resolution neutron time-of-flight measurements for light water at the Spallation Neutron Source (SNS), Oak Ridge National Laboratory

Series of light water inelastic neutron scattering experiments have been made at the Oak Ridge National Laboratory (ORNL), Spallation Neutron Source (SNS) covering temperatures ranging from 295 K to 600 K and pressures of 1 bar and 150 bar. The temperatures and pressures ranges correspond to that of pressurized light water reactors. The inelastic scattering measurements will help the development of light water thermal scattering kernels, also known as S (α,β) thermal scattering law (TSL), in a consistent fashion given the amount and the quality of the measured data. Light water thermal scattering evaluations available in existing nuclear data libraries have certain limitations and pitfalls. This paper introduces the state of the art of the light water thermal scattering cross-section data not only for room temperature but as well as for reactor operating temperatures, i.e. 550 - 600 K. During the past few years there has been a renewed interest in re-investigating the existing TSL models and utilize the recent experimental data or perform molecular dynamics simulations. It should be pointed out that no single TSL evaluation is based entirely on experimental data and one has to rely on TSL models or a combination of both. New TOF measurement of light water at the SNS, with a detailed description of the experimental setup, measurement conditions, and the associated foreseen results is presented in this paper. The analysis of the experimental data would help in validating the existing approach based on old experimental data or based on molecular dynamic simulations using classical water models, knowledge of which is very important to generate TSL libraries at reactor operating conditions.

Leal, Luiz C.↗

Data transmission by quantum matter wave modulation

Abstract Classical communication schemes exploiting wave modulation are the basis of our information era. Quantum information techniques with photons enable future secure data transfer in the dawn of decoding quantum computers. Here we demonstrate that also matter waves can be applied for secure data transfer. Our technique allows the transmission of a message by a quantum modulation of coherent electrons in a biprism interferometer. The data is encoded in the superposition state by a Wien filter introducing a longitudinal shift between separated matter wave packets. The transmission receiver is a delay line detector performing a dynamic contrast analysis of the fringe pattern. Our method relies on the Aharonov–Bohm effect but does not shift the phase. It is demonstrated that an eavesdropping attack will terminate the data transfer by disturbing the quantum state and introducing decoherence. Furthermore, we discuss the security limitations of the scheme due to the multi-particle aspect and propose the implementation of a key distribution protocol that can prevent active eavesdropping.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Discovery and characterization of two Neptune-mass planets orbiting HD 212729 with TESS

ABSTRACT We report the discovery of two exoplanets orbiting around HD 212729 (TOI 1052, TIC 317060587), a Teff = 6146 K star with V = 9.51 observed by TESS in Sectors 1 and 13. One exoplanet, TOI-1052b, is Neptune-mass and transits the star, and an additional planet TOI-1052c is observed in radial velocities but not seen to transit. We confirm the planetary nature of TOI-1052b using precise radial velocity observations from HARPS and determined its parameters in a joint RV and photometry analysis. TOI-1052b has a radius of $2.87^{+0.29}_{-0.24}$ R⊕, a mass of 16.9 ± 1.7 M⊕, and an orbital period of 9.14 d. TOI-1052c does not show any transits in the TESS data, and has a minimum mass of $34.3^{+4.1}_{-3.7}$ M⊕ and an orbital period of 35.8 d, placing it just interior to the 4:1 mean-motion resonance. Both planets are best fit by relatively high but only marginally significant eccentricities of $0.18^{+0.09}_{-0.07}$ for planet b and $0.24^{+0.09}_{-0.08}$ for planet c. We perform a dynamical analysis and internal structure model of the planets as well as deriving stellar parameters and chemical abundances. The mean density of TOI-1052b is $3.9^{+1.7}_{-1.3}$ g cm−3 consistent with an internal structure similar to Neptune. A nearby star is observed in Gaia DR3 with the same distance and proper motion as TOI-1052, at a sky projected separation of $\scriptstyle \sim$1500 au, making this a potential wide binary star system.

Armstrong, David J. (ORCID:0000000250804117)↗

Bright trion emission from semiconductor nanoplatelets

The trion, a quasiparticle comprising one exciton and an additional charge carrier, offers unique opportunities for generating spin-photon interfaces that can be used in developing quantum networks. Trions are also actively sought after for integrated optoelectronic devices including photovoltaics, photodetectors, and spintronics. However, formation of trions in strongly confined low-dimensional materials is often deemed detrimental. This is because trion emission in such materials is typically prohibited due to the predominant nonradiative Auger recombination processes. Semiconductor nanoplatelets with their strong confinement in the thickness direction and extended lateral geometries exhibit large exciton coherence sizes and reduced carrier-carrier interactions that may enable unprecedented trion properties. In this paper, we perform optical spectroscopic studies of individual CdSe nanoplatelets at cryogenic temperatures and observe bright trion emission with intensities comparable to that of neutral exciton emission. We perform carrier dynamics studies of the nanoplatelets and find that due to their extended lateral geometry, the fast radiative decay rate of the nanoplatelets at cryogenic temperatures is comparable to the inhibited Auger recombination rate, leading to the bright trion emission. Our tight-binding theory further reveals distinct size-tunable trion emission in the nanoplatelets that is advantageous for efficient trion emission. These properties make semiconductor nanoplatelets potential candidates as photon sources for optoelectronic and quantum logic devices.

36 MATERIALS SCIENCE↗

Composition-dependent fracture energy in metallic glasses

The interplay between metallic glasses (MGs) mechanical properties, fracture energy (G), and glass-forming ability (GFA) and their dependence on alloy composition remain poorly understood. Here, we perform molecular dynamics simulations to investigate the intrinsic composition-dependence of G in Cu x Zr 100-x MGs (x = 20, 30, 40, 50, 64). The results indicate that the value of G increases with Cu content. In addition, it is revealed that MGs with higher G values display higher Poisson’s ratio (ν) and GFA, suggesting a close correlation between fracture toughness, mechanical properties, and GFA. This correlation between G, ν and GFA can be understood based on the fragility (m) of supercooled liquids, which is directly related to the structural heterogeneity in MGs. Larger m values are related to dynamic slowdown and supercooled liquid stabilization, which enhance GFA and the formation of pronounced structural heterogeneity, comprised of loosely packed regions that favor β-relaxation and the activation of shear transformation zones. Those concurrently promote the expansion of the plastic zone at the crack tip, enhancing the observed value of G. Furthermore, these simulation results shed light on the intrinsic relationship between fracture toughness, mechanical properties, and alloy composition in MGs.

36 MATERIALS SCIENCE↗

Enhanced Inertial Support: Modeling Fast Frequency Response Controls for Energy Storage System Inverters

Reduction of power system inertia is a growing concern for grid operators given the transition under way from conventional fossil generators to inverter-based resources. One key concern is the rapid and severe dip in power system frequency following a large disturbance which could trigger remedial actions including operation of under frequency load shedding (UFLS) relays. A potential solution is to utilize battery energy storage systems (BESS) to provide fast frequency response(FFR) to mitigate the system frequency impact of low system inertia. In this work, we investigate different control parameters to achieve modeled FFR response from BESS in the simulated US Western Interconnection. First, a very low inertia model is developed from an existing positive sequence model of the Western Interconnection. Afterwards, we tune the BESS dynamic response parameters to eliminate any risks of reaching UFLS relay thresholds following the loss of large generators. Finally, we investigate the relative impact of having large BESS units in comparison of multiple smaller units in the same area. The results of the analyses indicate that 1 GW of transmission-connected BESS can help mitigate the frequency drop caused by large generators outages in the Western Interconnection, and significantly reduce the risk of under frequency load shedding.

power system dynamic performance, Low Inertia, Fas↗

Increasing thermostability of the key photorespiratory enzyme glycerate 3‐kinase by structure‐based recombination

As global temperatures rise, improving crop yields will require enhancing the thermotolerance of crops. One approach for improving thermotolerance is using bioengineering to increase the thermostability of enzymes catalysing essential biological processes. Photorespiration is an essential recycling process in plants that is integral to photosynthesis and crop growth. The enzymes of photorespiration are targets for enhancing plant thermotolerance as this pathway limits carbon fixation at elevated temperatures. We explored the effects of temperature on the activity of the photorespiratory enzyme glycerate kinase (GLYK) from various organisms and the homologue from the thermophilic alga Cyanidioschyzon merolae was more thermotolerant than those from mesophilic plants, including Arabidopsis thaliana. To understand enzyme features underlying the thermotolerance of C. merolae GLYK (CmGLYK), we performed molecular dynamics simulations using AlphaFold-predicted structures, which revealed greater movement of loop regions of mesophilic plant GLYKs at higher temperatures compared to CmGLYK. Based on these simulations, hybrid proteins were produced and analysed. These hybrid enzymes contained loop regions from CmGLYK replacing the most mobile corresponding loops of AtGLYK. Two of these hybrid enzymes had enhanced thermostability, with melting temperatures increased by 6 °C. One hybrid with three grafted loops maintained higher activity at elevated temperatures. Whilst this hybrid enzyme exhibited enhanced thermostability and a similar Km for ATP compared to AtGLYK, its Km for glycerate increased threefold. This study demonstrates that molecular dynamics simulation-guided structure-based recombination offers a promising strategy for enhancing the thermostability of other plant enzymes with possible application to increasing the thermotolerance of plants under warming climates.

59 BASIC BIOLOGICAL SCIENCES↗

BLAST aka: BLAST-Py see also BLAST-Lite (Battery Lifetime Analysis and Simulation Tool Suite - Python) [SWR-22-69]

Battery Lifetime Analysis and Simulation Tool Suite (BLAST or BLAST-Py) developed in the Python programming language. BLAST-Py predicts the evolution of lithium-ion battery performance metrics over their lifetime, using models trained on lab-based accelerated aging data to predict battery performance in dynamic, real-world use. BLAST-Py contains existing models for a variety of lithium-ion battery chemistries (NMC/Gr and LFP/Gr). See also the open-source version of this software tool known as "BLAST-Lite" at: https://github.com/NREL/BLAST-Lite

Smith, Kandler↗

Distributed Acoustic Sensing for Whale Vocalization Monitoring: A Vertical Deployment Field Test

Abstract There is growing interest in floating offshore wind turbine (FOWT) technology, where turbines are installed on floating structures anchored to the seabed, allowing wind energy development in areas unsuitable for traditional fixed-platform turbines. Responsible development requires monitoring the impact of FOWTs on marine wildlife, such as whales, throughout the operational lifecycle of the turbines. Distributed acoustic sensing (DAS)—a technology that transforms fiber-optic cables into vibration sensor arrays—has been demonstrated for acoustic monitoring of whales using seafloor telecommunications cables. However, no studies have yet evaluated DAS performance in dynamic, engineered environments, such as floating platforms or moving vessels with complex, dynamic strain loads, despite their relevance to FOWT settings. This study addresses that gap by deploying DAS aboard a boat in Monterey Bay, California, where a fiber-optic cable was lowered using a weighted and suspended mooring line, enabling vertical deployment. Humpback whale vocalizations were captured and identified in the DAS data, noise sources were identified, and DAS data were compared to audio captured by a standalone hydrophone attached to the mooring line and a nearby hydrophone on a cabled observatory. This study is unique in: (1) deploying DAS in a vertical deployment mode, where noise from turbulence, cable vibrations, and other sources posed additional challenges compared to seafloor DAS applications; (2) demonstrating DAS in a dynamic, nonstationary setup, which is uncommon for DAS interrogators typically used in more stable environments; and (3) leveraging looped sections of the cable to reduce the noise floor and mitigate the effects of excessive cable vibrations and strain. This research demonstrates DAS’s ability to capture whale vocalizations in challenging environments, highlighting its potential to enhance underwater acoustic monitoring, particularly in the context of renewable energy development in offshore environments.

Saw, Jaewon↗

Redesign of the Jefferson Lab -300 kV DC Photo-Gun for High Bunch Charge Operations

Production of high bunch charge beams for the Electron-Ion Collider (EIC) is a challenging task. High bunch charge (a few nC) electron beam studies at Jefferson Lab using an inverted insulator DC high voltage photo-gun showed evidence of space charge limitations starting at 0.3 nC, limiting the maximum delivered bunch charge to 0.7 nC for beam at -225 kV, 75 ps (FWHM) pulse width, and 1.64 mm (rms) laser spot size. The low extracted charge is due to the modest longitudinal electric field (Ez) at the photocathode leading to beam loss at the anode and downstream beam pipe. To reach the few nC high bunch charge goal, and to correct the beam deflection exerted by the non-symmetric nature of the inverted insulator photo-gun the existing photo-gun was modified. This contribution discusses the electrostatic design of the modified photo-gun obtained using CST Studio Suite’s electromagnetic field solver. Beam dynamics simulations performed using General Particle Tracer (GPT) with the resulting electrostatic field map obtained from the modified electrodes confirmed the validity of the new design.

Wijethunga, S.A.K.↗

Developing Metrics to Evaluate the Skill and Credibility of Downscaling

Major activities for this project consisted of three related elements: Comparing results using statistical downscaling to the dynamical downscaling performed by the UCLA (Dr. Alex Hall) team in the proposal Developing statistical downscaling methods for wind and near-surface humidity Evaluating differences in extremes across downscaling methods.

17 WIND ENERGY↗

Advanced Cost-Effective Coal-Fired Rotating Detonation Combustor for High Efficiency Power Generation

Coal-based detonation as a means of heat addition in power generation devices is a revolutionary “out of the box” technology concept, wherein it is theoretically possible to achieve an increase in total pressure across the combustor as opposed to a loss of available energy as is the case in conventional combustion systems. Detonation is a revolutionary technology concept of pressure gain combustion that exploits pressure rise from the combustion process to augment high flow momentum and pressures. Recognizing that pressure gain combustion has become a topic of elevated national interest, high energetic modes (exergy) pressure gain combustion (PGC) systems are required. Pressure gain combustion is a key enabling technology for maintaining technological superiority in the development of advanced power generation systems. Pressure gain combustion is an innovative scheme of turbulent combustion that considerably increases thermodynamic cycle efficiencies (~10-20%). This project extends the State-of-the-Art by providing the first direct experimental and computational data of operability dynamics and performance characterization data and create the first validated Coal-Fired RDC investigations. Coal-based RDC is an innovative revolutionary technology that would result in high efficiency power generation and reduced of harmful emissions. Also, the fundamental and open source nature of the project will benefit a broader scientific and industry audience who will be able to utilize the outcomes of this project for advancing the coal-fired RDC power generation development.

01 COAL, LIGNITE, AND PEAT↗

Fracture [Slides]

The Hemisphere provides a very useful platform for understanding bi-axial strain performance under dynamic loading conditions. The fragments maintain a hemispherical surface; combined with other diagnostics, this permits estimation of strain-to-fracture (even though the radiograph is taken after fracture).

36 MATERIALS SCIENCE↗

Rational Design of High-Performing Electrodes in Energy Storage Devices

Our approach in this project is to control conductivities of different ions by modulating the pore sizes in MOFs as sulfur hosts in cathodes. To validate our hypothesis that controlling the pore size of MOFs can effectively prevent LiPSs shuttling while allowing sufficient Li ion transport, which will ensure electrochemical cycling performance, we performed molecular dynamics (MD) simulations using a series of UiO MOFs with different linker sizes including LiPSs and electrolyte components (1M LiTFSI in DME/DOL 1:1 volume) in pores. Specifically, UiO-66, UiO-67, and UiO-68 are Zr-based MOFs with a linker length of 5.67 Å, 10.07 Å, and 14.35 Å, respectively, leading to different pore diameters of 8.4 Å, 12.8 Å, and 17.8 Å. We calculated the mean-squared displacements of Li and LiPS from MD simulations at 300 K for 50 ns or over to assess their mobility in MOFs.

25 ENERGY STORAGE↗

Sierra/SolidMechanics for Target Pulse Analysis

Sierra is a Multiphysics engineering simulation software suite developed and maintained by Sandia National Laboratories. Created for nuclear weapon needs, it is available to national laboratories with a foreign national restriction. The STS Target Systems analysis team is interested in using Sierra to perform explicit dynamics simulations of the tantalum clad tungsten target blocks as a response to sudden temperature changes induced by proton beam pulses. The capability already exists with Abaqus|Explicit, however, there are time and cost limitations due to licensing. The following document serves as a “quick-start” guide to the successful setup, simulation, and post-processing of a target model in Sierra on the OZ3 computing cluster at the Spallation Neutron Source.

97 MATHEMATICS AND COMPUTING↗

Introducing Kynema, an Open-Source Performance-Portable Flexible-Multibody-Dynamics Solver

In this talk we introduce Kynema, an open-source general flexible-multibody-dynamics solver that is well suited for simulating wind turbine structural dynamics. Kynema uses a Lie-group time integrator for constrained systems and runs on both CPUs and GPUs. Timing results for simulations are presented for the IEA 15-MW turbine with and without aerodynamic forces.

17 WIND ENERGY↗

Operability of a Natural Gas–Air Rotating Detonation Engine

A combustor was developed to operate with natural gas and air as the primary propellants at elevated chamber pressures and air preheat temperatures representative of land-based power generation gas turbine engines. Detonation dynamics were studied to characterize the operability of rotating detonation-based pressure gain combustion systems for this application. Measurements of chamber wave dynamics were performed using high-frequency pressure transducers and high-speed imaging of broadband combustion chemiluminescence. The rotating detonation engine was tested with two injector configurations across a broad range of mass flux (200–500 kg/m 2 /s), equivalence ratio (0.85–1.2), and oxygen mass fraction (23.2–35%) conditions to determine the effect of operating parameters on the propagation of detonation waves in the combustor. Wave propagation speeds of up to 70% of the mixture Chapman–Jouguet detonation velocity and chamber pressure fluctuations greater than 4 times the mean chamber pressure were observed. Supplementing the air with additional oxygen, varying the equivalence ratio, and enriching the fuel with hydrogen revealed that combustor operability is sensitive to the chemical kinetics of the propellant mixture. Comparing the operational trends of the two injector configurations suggests that one design mixes the incoming propellants more effectively. Although most test conditions exhibited counter-rotating detonation waves within the chamber, the injector design with superior mixing characteristics was able to support single-wave propagation.

20 FOSSIL-FUELED POWER PLANTS↗

Power System Event Classification and Localization Using a Convolutional Neural Network

Detection and timely identification of power system disturbances are essential for situation awareness and reliable electricity grid operation. Because records of actual events in the system are limited, ensemble simulation-based events are needed to provide adequate data for building event-detection models through deep learning; e.g., a convolutional neural network (CNN). An ensemble numerical simulation-based training data set have been generated through dynamic simulations performed on the Polish system with various types of faults in different locations. Such data augmentation is proven to be able to provide adequate data for deep learning. The synchronous generators’ frequency signals are used and encoded into images for developing and evaluating CNN models for classification of fault types and locations. With a time-domain stacked image set as the benchmark, two different time-series encoding approaches, i.e., wavelet decomposition-based frequency-domain stacking and polar coordinate system-based Gramian Angular Field (GAF) stacking, are also adopted to evaluate and compare the CNN model performance and applicability. The various encoding approaches are suitable for different fault types and spatial zonation. With optimized settings of the developed CNN models, the classification and localization accuracies can go beyond 84 and 91%, respectively.

24 POWER TRANSMISSION AND DISTRIBUTION↗