Search NASA⌕ Search

SEARCH · Search NASA

Results for “dynamic state estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Dephasing and error dynamics affecting a singlet-triplet qubit during coherent spin shuttling

Quantum information transport over micron to millimeter scale distances is critical for the operation of practical quantum processors based on spin qubits. One method of achieving a long-range interaction is by coherent electron spin shuttling through an array of silicon quantum dots. In order to execute many shuttling operations with high fidelity, it is essential to understand the dynamics of qubit dephasing and relaxation during the shuttling process in order to mitigate them. However, errors arising after many repeated shuttles are not yet well documented. Here, we probe decay dynamics contributing to dephasing and relaxation of a singlet-triplet qubit during coherent spin shuttling over many N repeated shuttle operations, in a small external magnetic field B 0 ≈ 0−10 mT, and in the absence of a micromagnet. We find that losses are dominated by magnetic dephasing, most visible for small N < 10 3 . However, incoherent spin-flip type shuttle errors become evident for large N > 10 3 . Additionally, we estimate shuttle error rates below 10 −4 out to at least N = 10 3 , representing an encouraging figure for future implementations of spin shuttling to entangle distant qubits.

quantum dots↗
DOE OSTI2025

Real-Time High-Accuracy Digital Wireless Time, Frequency, and Phase Calibration for Coherent Distributed Antenna Arrays

his work presents a fully-digital high-accuracy real-time calibration procedure for frequency and time alignment of open-loop wirelessly coordinated coherent distributed antenna array (CDA) modems, enabling radio frequency (RF) phase coherence of spatially separated commercial off-the-shelf (COTS) software-defined radios (SDRs) without cables or external references such as the global navigation satellite system (GNSS). Building on previous work using high-accuracy spectrally-sparse time of arrival (ToA) waveforms and a multistep ToA refinement process, a high-accuracy two-way time transfer (TWTT)-based time–frequency coordination approach is demonstrated. Due to the two-way nature of the high-accuracy TWTT approach, the time and frequency estimates are Doppler and multipath tolerant, so long as the channel is reciprocal over the synchronization epoch. This technique is experimentally verified using COTS SDRs in a lab environment in static and dynamic scenarios and with significant multipath scatterers. Time, frequency, and phase stability were evaluated by beamforming over coaxial cables to an oscilloscope which achieved time and phase precisions of ~60– 70 ps , with median coherent gains above 99% using optimized coordination parameters, and a beamforming frequency root-mean-square error (RMSE) of 3.73 ppb in a dynamic scenario. Finally, experiments were conducted to compare the performance of this technique with previous works using an analog continuous-wave two-tone (CWTT) frequency reference technique in both static and dynamic settings.

Clock synchronization↗
DOE OSTI2026

Light-Driven Iodine Loss and Photoluminescence Homogenization in Mixed-Halide Perovskite Semiconductors

Carrier-induced instabilities in lead halide perovskites are often investigated as either transient phenomena, e.g., photoinduced halide segregation or permanent performance changes, e.g., photodegradation, while the mechanistic links between them remain unclear. Here, we aim to connect these observations by studying a model mixed-halide system, MAPb(Br x I 1–x ) 3 . By combining grazing-incidence X-ray diffraction, photothermal deflection spectroscopy, and photoluminescence measurements with hyperspectral microscopy, we investigate the role of mobile halide defects and local chemistry on reversible and long-term instabilities in these materials. Our results show that mixed-halide perovskites are uniquely susceptible to photoinduced changes with illumination driving initial iodide redistribution (i.e., halide segregation), eventual selective iodine expulsion, and subsequent changes in photoinduced halide segregation behavior. By quantifying structural and compositional changes, we estimate an approximately 3–5% iodine loss in our mixed-halide samples after only 24 h of illumination. Further, using microscale measurements, we identify pre-existing iodide-rich domains as key contributors to both the observed transient photostability and permanent iodine loss in MAPbBrI 2 , and see evidence that extended light soaking results in iodide redistribution that improves optoelectronic homogeneity. Overall, our results emphasize the importance of carrier-induced halide oxidation in creating a dynamic defect landscape in mixed-halide perovskites and provide a framework for interpreting apparent light-driven changes in optoelectronic behavior through the lens of permanent compositional changes.

electrical conductivity↗
DOE OSTI2025

ITreeForeCast: An integrated modeling software to simulate tree level growth and forest carbon storage

Healthy trees in forest act as a natural carbon sink, capturing carbon. As they grow, they store carbon in their trunks, leaves and roots. Not all trees store carbon at the same rate, or in the same quantities, as it depends on a variety of biophysical and climatic factors. Furthermore, although carbon estimation in trees can be complex, the precision of estimates is tightly linked to trees growth, both in diameter and height. However, the simulation of carbon uptake by forest and forest growth has each been modeled separately, and independently at differing levels of detail and spatial resolution. In this paper, we introduce ITreeForeCast, a simulation model combining the two types of modeling on a unified platform, enabling the investigation of impacts of management strategies on carbon sequestration and wood products. ITreeForeCast is a user-extendable framework that offers new opportunities to model, simulate, and visualize the dynamics of individual trees in a forest, simulate management strategies over time, and carbon uptake.

09 - BIOMASS FUELS↗
DOE OSTI2025

Rheological Properties of Enzymatically Hydrolyzed Corn Stover Pretreated via Deacetylation and Mechanical Refining

Lignocellulosic biomass is a feedstock for fuels and chemicals that does not compete with food resources and has less contaminants than refuse-derived biomass feedstocks. To convert lignocellulosics to biofuels or value-added products, multiple processing steps are typically necessary. One method of producing biofuels from lignocellulosic biomass utilizes a deacetylation and mechanical refining pretreatment and an enzymatic hydrolysis reaction to produce fermentable sugars from cellulose and hemicellulose. The rheological properties of biomass, such as yield stress and plastic viscosity, change during enzymatic hydrolysis and alter the energy requirements for pumping and mixing, an important consideration for the design of processing equipment. The dynamic changes in rheological properties that occur in a corn stover feedstock undergoing enzymatic hydrolysis are characterized in this work, and the influence on pressure losses in piping systems is estimated. Two rheometer geometries were fabricated with stereolithography 3D printing to reduce wall slip and sample ejection. The slurries have complex rheological behaviors that include shear-thinning behavior. Shear stress ramps were performed on samples at 20 and 50 degrees C using the custom geometries, and the Herschel-Bulkley model was fit to the data. The dynamic nature of the rheological properties is correlated with changes in the average fiber length at various extents of reaction, and the influence of solids concentration on the observed rheology and piping pressure losses is discussed.

09 BIOMASS FUELS↗
DOE OSTI2026

Quantum solver for single-impurity Anderson models with particle-hole symmetry

Quantum embedding methods, such as dynamical mean-field theory (DMFT), provide a powerful framework for investigating strongly correlated materials. A central computational bottleneck in DMFT is in solving the Anderson impurity model (AIM), whose exact solution is classically intractable for large bath sizes. In this work, we benchmark a quantum-classical hybrid solver tailored for particle-hole symmetric AIMs, using the variational quantum eigensolver to prepare the ground state of the model with shallow quantum circuits. The solver uses shallow quantum ansätze and one set of variational parameters to prepare the ground state and its particle and hole excitations, enabling the construction of the impurity Green’s function through a continued-fraction expansion. We evaluate the performance of this approach across a few bath sizes and interaction strengths under noisy, shot-limited conditions. We compare three optimization routines (COBYLA, Adam, and L-BFGS-B) in terms of convergence and fidelity, assess the benefits of estimating a quantum-computed moment correction to the variational energies, and benchmark the approach by comparing the density of states computed from the impurity Green’s function against that obtained using a classical pipeline. Our results demonstrate the feasibility of Green’s function construction on near-term devices and establish practical benchmarks for quantum impurity solvers embedded within self-consistent DMFT loops.

Karabin, Mariia [ORNL]↗
DOE OSTI2026

Estimating value of information for heliostat washing operations at solar thermal plants

Concentrating solar power (CSP) plants depend on thousands of heliostats whose reflectance declines as dust accumulates. Operators routinely measure reflectance to estimate soiling and, in turn, inform cleaning schedules, but the value of collecting more frequent or more accurate data has not been formally quantified. This study introduces a Monte Carlo discrete event simulation framework that integrates stochastic models of soiling, weather, and measurement error with a dynamic cleaning dispatch policy to estimate annual energy production and operations costs. Applied to two representative central-receiver field configurations, the results show that both the frequency and accuracy of reflectance measurements can meaningfully impact plant performance. In both case studies, reducing measurement intervals yields significant returns, with the energy gains greatly exceeding the cost of more frequent data collection. The simulation framework serves as a decision-support tool for CSP operators, allowing them to input site-specific soiling conditions, measurement accuracy, and survey frequency to evaluate the tradeoffs between data collection cost and energy recovery, and to identify measurement strategies that maximize plant profit.

14 SOLAR ENERGY↗
DOE OSTI2026

Signal Whisperers: Enhancing Wireless Reception Using DRL-Guided Reflector Arrays

This paper presents a multi-agent reinforcement learning (MARL) approach for controlling adjustable metallic reflector arrays to enhance wireless signal reception in non-line-of-sight (NLOS) scenarios. Unlike conventional reconfigurable intelligent surfaces (RIS) that require complex channel estimation, our system employs a centralized training with decentralized execution (CTDE) paradigm where individual agents corresponding to reflector segments autonomously optimize reflector element orientation in three-dimensional space using spatial intelligence based on user location information. Through extensive ray-tracing simulations with dynamic user mobility, the proposed multi-agent beam-focusing framework demonstrates substantial performance improvements over single-agent reinforcement learning baselines, while maintaining rapid adaptation to user movement within one simulation step. Comprehensive evaluation across varying user densities and reflector configurations validates system scalability and robustness. The results demonstrate the potential of learning-based approaches for adaptive wireless propagation control.

deep reinforcement learning↗
DOE OSTI2025

Distinct Gas-Particle Partitioning and Viscosity Characteristics of Secondary Organic Aerosols Derived from α-Pinene versus Ocimene

Secondary organic aerosols (SOA) have complex, multicomponent composition that controls particle viscosity and gas-particle partitioning, key factors to their atmospheric evolution. This study investigates the chemical composition, volatility and viscosity of SOA formed by ozonolysis of cyclic α-pinene (PSOA) and acyclic ocimene (OSOA) monoterpenes. Using Temperature-Programmed Desorption combined with Direct Analysis in Real-Time ionization and High-Resolution Mass Spectrometry, we determined the molecular composition and saturation mass concentration of individual SOA constituents. These data enabled gas-particle partitioning and viscosity estimates under varied atmospheric conditions. PSOA, composed of higher molecular weight and less oxidized species, shows higher condensability and viscosity under high total organic mass (tOM) loadings. Here, in contrast, OSOA, consisting of more oxidized, lower molecular weight species, exhibits greater sensitivity to tOM, with viscosity increasing significantly upon dilution. Poke-flow experiments support this trend, indicating that OSOA undergoes more dynamic compositional and phase changes during atmospheric aging. These observations reveal distinct dynamic trends in the atmospheric transformations and reactivity of SOA from cyclic and acyclic monoterpenes, with the latter showing greater compositional changes during aging that alter viscosity and diffusion. This highlights the importance of incorporating such dynamic transformations into atmospheric models to improve predictions of SOA atmospheric loadings, lifetimes, and impacts.

cyclic and acyclic monoterpenes↗
DOE OSTI2025

The decay of HIV under anti-retroviral therapy is biphasic even in humanized mice with just T cells

HIV-1 plasma viral load decays in a biphasic manner during antiretroviral therapy (ART). It was hypothesized that this is due to infection of different cell types, namely CD4+ T cells and macrophages. We studied this possibility directly by modeling the decay of HIV-1 in humanized mice. We utilized previously published data from humanized T-cell only mice (TOM) and myeloid-only mice (MOM) infected with HIV-1 and treated with a potent ART regimen. Viral load decay dynamics were modeled using either a single or a biexponential decay fitted using nonlinear mixed effects techniques. Fits were compared using the corrected Bayesian information criterion (BICc). In TOM, the biphasic model was significantly better than a single-phase decay model (ΔBICc ≈ 16) despite additional parameters. In MOM, the biphasic decay was statistically better, but there was substantial uncertainty because the virus goes below detection very fast. The first-phase half-life was consistent between groups (1.2 days in MOM and 1.3 days in TOM) and similar to the half-life estimated in human infection. The second-phase decay in these mice was minimal likely due to low initial viral loads. Additional analyses with mice containing both CD4+ T cells and macrophages or X4-tropic virus-infected MOM mice confirmed the biphasic pattern, demonstrating the robustness of this result. The biphasic decline in HIV-1 occurs, even with only CD4+ T cells, refuting the hypothesis that distinct cell populations (CD4+ T cells and macrophages) drive each decay phase. These findings support an alternative model in which the observed dynamics arise from intrinsic properties of the viral infection lifecycle rather than from cellular compartmentalization.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

An analysis of parameters affecting ampacity in aircraft bipolar MVDC power cables via coupled electrical, thermal, and computational fluid dynamic modelling

Abstract The next generation of aircraft, including more electric aircraft and all‐electric aircraft (AEA), requires electric power systems with high power density and low system mass specifications. Increasing the voltage of the system to the range of a few kV, medium voltage (MV), is a reasonable approach to achieving high‐power‐density and low‐system‐mass EPSs for aircraft applications. Higher voltages, however, pose many challenges for aviation MV power cables such as arcs and arc tracking, partial discharges (PDs), and thermal management. In this regard, thermal management is more challenging since heat transfer by convection is greatly reduced at wide‐body aircraft's cruising altitudes due to the reduced air pressure. In this paper, a finite element method (FEM) model is developed in COMSOL Multiphysics for an aircraft bipolar MVDC (±5 kV) power cable. Using the model, the maximum permissible cable current at a low pressure of 18.8 kPa (at an altitude of 12.2 km from sea level, the usual cruising altitude for wide‐body aircraft) is calculated. Also, an analytical model is developed based on analytical and proven empirical correlations governing conductive, radiative, and convective heat transfers at the steady state to estimate the ampacity of the bipolar cable system at reduced pressure. It was shown that the proposed analytical model can be used for atmospheric pressure and systems with a larger number of poles, expanding its range of applications. The results of the FEM and analytical models correlate at wide ranges of parameters such as ambient temperature, duct size, distance between the positive and negative pole cables, and the overall diameter of the cables. The influence of horizontal and vertical arrangement of poles is included in the analytical model. The results of this study can be used to design bipolar MVDC power cable systems for the envisaged wide‐body AEA.

Azizi, Arian↗
DOE OSTI2025

Cross-scale covariance for material property prediction

A simulation can stand its ground against an experiment only if its prediction uncertainty is known. The unknown accuracy of interatomic potentials (IPs) is a major source of prediction uncertainty, severely limiting the use of large-scale classical atomistic simulations in a wide range of scientific and engineering applications. Here we explore covariance between predictions of metal plasticity, from 178 large-scale (~10 8 atoms) molecular dynamics (MD) simulations, and a variety of indicator properties computed at small-scales (≤10 2 atoms). All simulations use the same 178 IPs. In a manner similar to statistical studies in public health, we analyze correlations of strength with indicators, identify the best predictor properties, and build a cross-scale “strength-on-predictors” regression model. This model is then used to estimate regression error over the statistical pool of IPs. Small-scale predictors found to be highly covariant with strength are computed using expensive quantum-accurate calculations and used to predict flow strength, within the statistical error bounds established in our study.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A multi model ensemble reveals net climate benefits from regenerative practices in US Midwest croplands

Process-based cropping systems models (CSMs) are key components of measurement, monitoring, reporting, and verification frameworks of carbon markets, but model-specific differences limit their applicability across diverse pedo-climatic conditions and agronomic practices. Multi-model ensemble (MME) provides an opportunity to better estimate changes in soil organic carbon (SOC) and nitrous oxide (N 2 O) emissions from agronomic practices at scale. We used an MME across 46 million hectares of US Midwest cropland at a resolution of 4-km 2 to assess the aggregate ability of different regenerative practices to sequester SOC and N 2 O emissions compared to their counterfactual dynamic baselines. MME was validated against long-term trials and compared to its constituent CSMs, showing greater accuracy and lower uncertainty. The results show that adopting no-till combined with cover crops increased SOC stocks by 0.36 ± 0.12 Mg ha -1 yr -1 , corresponding to a net regional SOC gain of 16.4 Tg C yr -1 compared to business-as-usual baselines. These benefits are halved when each management is practiced individually, and the SOC gains are only fully realized with low initial carbon stock. By including N 2 O emissions, we can assess the overall climate mitigation potential, specifically, the extent to which carbon sequestration can offset direct N 2 O emissions. The magnitude of this potential varies depending on management practices and geographic location with net climate benefits on average ranging from 0 to 3 Mg CO 2 -eq ha -1 yr -1 . High-resolution MME results allow for robust estimates of climate mitigation, reducing barriers to carbon market participation and supporting regenerative agriculture initiatives at scale.

carbon credits↗
DOE OSTI2025

Bottomonium properties in the quark-gluon plasma from a lattice-QCD informed 𝑇-matrix approach

Recent computations of bottomonium correlation functions with extended sources in lattice-discretized quantum chromodynamics (lQCD) provide new insights into heavy-quark dynamics at distance scales which are of the order of the inverse temperature. We analyze these results employing the thermodynamic 𝑇-matrix framework, in a continued effort to interpret lQCD data for quarkonium correlation functions in a nonperturbative and self-consistently solved quantum-many-body approach to a strongly coupled quark-gluon plasma (QGP). Its key inputs are the in-medium driving kernel (potential) of the scattering equation and an interference function which implements 3-body effects in the quarkonium coupling to the thermal medium. A simultaneous description of lQCD results for the bottomonium correlators with extended operators and the previously analyzed Wilson line correlators only requires minor refinements of the potential but calls for stronger interference effects at larger separation of the bottom quark and antiquark. We then analyze the poles of the self-consistent 𝑇 matrices on the real axis to assess the survival of the various bound states. Here, we estimate the pertinent temperatures where the poles disappear for the various bottomonium states and discuss the relation to the corresponding peaks in the bottomonium spectral functions. We also recalculate the spatial diffusion coefficient of the QGP and find it to be similar to that in our previous study.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Advancing Ethanol-to-Jet cost Effectiveness via direct conversion to n -Butene-Rich olefins and Co-Product Valorization

Ethanol is a promising feedstock for sustainable aviation fuel production; however, conventional routes face significant energy and cost challenges, particularly due to the ethanol dehydration step to ethylene. Here, this study leverages breakthrough experimental data to perform comprehensive techno-economic and life-cycle assessments of an innovative ethanol-to-jet process. The process employs a single-step catalytic conversion, enabled by multifunctional Cu-ZrO 2 /SBA-16 catalyst, to directly upgrade ethanol into a mixed olefin stream rich in n-butene. The single-step conversion eliminates the costly ethanol dehydration step in the conventional process. High selectivity toward n-butene offers key advantages: it simplifies downstream oligomerization into jet-range hydrocarbons and enables the co-production of renewable n-butene alongside sustainable aviation fuel. The analysis estimates a minimum fuel selling price as low as $\$$2.50 per gallon, whether using corn ethanol or cellulosic ethanol from corn stover. Life cycle CO 2 equivalent emissions are projected to be as low as 10.6 g CO 2 eq/MJ sustainable aviation fuel, representing over 70% reduction compared to conventional petroleum-based jet fuel. This one-step ethanol upgrading approach not only facilitates SAF and n-butene co-production but also provides operational flexibility. The ability to tailor product outputs allows the ethanol-to-jet process to adapt to varying feedstocks, incentive programs, and market dynamics, ultimately enhancing the economic viability of sustainable aviation fuel production.

Xu, Yiling [Pacific Northwest National Laboratory ↗
DOE OSTI2025

Anomalous neutron nuclear-magnetic interference spectroscopy

The electron–phonon interaction plays a critical role in materials’ electrical, thermal, optical, and superconducting properties. However, measuring the phonon mode-resolved electron–phonon interaction has been challenging. Here we propose neutron-scattering-based Anomalous Neutron nUclear-Magnetic Interference Spectroscopy (ANUBIS), where the co-existence of neutron nuclear scattering and magnetic scattering leads to anomalous dynamical structure factor under the presence of the electron–phonon interaction. Such anomalous structure factor is linear in electron–phonon coupling constant at the phonon wavevector, and is directly proportional to the momentum and energy-resolved dielectric function. The experimental configuration can be achieved using existing polarized inelastic neutron scattering setup, and an order-of-magnitude estimate shows the viability to observe the anomalous scattering signal is around to 10 –4 to 10 –3 relative to phonon scattering, which is examined through the preliminary experiments and achievable at emerging neutron facilities. As a result, our proposal offers an alternative neutron-based metrology to probe the crucial electronic properties.

Electron-phonon interactions↗
DOE OSTI2025

The Triple Catalytic Action of Tertiary Nitrogen Catalysts in Recyclable Epoxy-Anhydride Thermosets

The thermosetting polymer matrix in fiber reinforced composites is an important component for energy related applications, such as the lightweighting of vehicles or their use in wind and waterpower turbine blades, due to their ability to provide superior adhesion, stiffness, and applicability to a wide range of manufacturing processes. Despite these benefits, today's thermosets are widely considered to be unrecyclable; thus, there is a large interest in redesigning these materials to be inherently recyclable so that energy intensive production of fibers and monomers can be circumvented, bolstering composite manufacture supply chains. Polyester covalent adaptable networks (PECANs) are one such promising alternative to the incumbent, nonrecyclable epoxy-amine thermosets. PECANs can be formed from the ring-opening co-polymerization (ROCOP) of epoxy-anhydride monomer mixtures and subsequent curing at mild temperatures to exhibit similar performance to conventional epoxies while also possessing unique dynamic chemistries along the ester-hydroxyl backbone that are capable of transesterification and thus reprocessability. While significant advancements have been made in formulating these materials for improved mechanical properties or optimizing solvolysis and reprocessing strategies, less attention has been placed on the impact of the residing amine catalyst used to generate the polyester network. In this work, we evaluated the triple-catalytic efficacy of 12 tertiary amines that act as a curing (bulk ROCOP), a transesterification (internal bond exchange), and a deconstruction (methanolysis) catalyst for PECAN thermosets. Specifically, we first distinguish between chain-growth and step-growth polymerization mechanisms for epoxy-amine and epoxy-anhydride mechanisms. We also utilized density functional theory (DFT) to estimate the basicity (pKb) of each catalyst. Of the tested catalysts, the ROCOP of the studied PECAN network can be completed between 95 and 247 min (at 80 degrees C), with variable gelation phenomena. Additionally, the stress relaxation (transesterification metric) efficiency of the tested PECAN networks with alternative embedded catalysts ranged from 95% to 15% reduction in stress after 5 h at 200 degrees C, and the depolymerization efficacy ranged from 2.5% to 9.8% deconstruction after 36 h at 130 degrees C. Overall, the nitrogen-based moieties were demonstrated to influence polymerization kinetics, catalyze the dynamic transesterification exchange mechanism, and aid in the solvolysis of the thermosets at end-of-life.

36 MATERIALS SCIENCE↗
DOE OSTI2026

From molecular to macroscopic: predicting liquid–liquid phase equilibria and small-angle scattering of mixtures of organic liquids from atomistic simulation using Kirkwood–Buff theory

Macroscopic phase equilibria between solutions define the functionality of many biological and industrial processes, yet they are challenging to predict due to the inherent complexity of liquids containing large molecules. This work introduces an approach for the purely predictive calculation of such phase equilibria in temperature-composition space from molecular dynamics (MD) simulations at one temperature in the single-phase region. We use an approach developed previously to obtain the entropic and enthalpic contributions to the free energy of mixing from the atomic-scale information given by MD simulations via Kirkwood–Buff theory. This allows us to accurately estimate the free energy of mixing as a function of temperature, and thus obtain liquid–liquid phase equilibria, including liquid–liquid critical points, associated binodal and spinodal lines, and composition fluctuations across a region of temperature and composition. Results for binary malonamide–alkane systems are validated by comparison to a direct experimental probe of the fluctuations: the small angle X-ray scattering intensity near zero wavenumber. The MDKB → Phase method demonstrated here provides a significant improvement in predicting liquid–liquid equilibria and free energy as a function of temperature for our systems of interest compared to conventional thermodynamic models. The accurate performance of this purely predictive approach lies in its preservation of atomistic details when determining thermodynamic properties. Furthermore, its inherent extensibility to multi-component systems will likely make the MDKB → Phase approach a valuable general tool for connecting molecular interactions to macroscopic phase equilibria and for the computational screening of materials for targeted thermodynamic behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗