Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrocatalyst”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Semiconductor-electrocatalyst contacts: theory, experiment, and applications to solar water photoelectrolysis

Semiconductor photoelectrodes coated with electrocatalysts are key components of photoelectrochemical (PEC) energy conversion and storage systems. Such systems could provide a way to convert the energy in sunlight directly into energy stored in a fuel like hydrogen gas to power our modern society without using fossil fuels. Despite an intense effort aimed at optimizing these materials, there has been little systematic work focused on the semiconductor-electrocatalyst (SC|EC) interface. The SC|EC interface is important because it is responsible for collecting the photoexcited electron-hole pairs generated in the semiconductor. During the performance period we initiated a fundamental effort to understand interfacial electron transfer between electrocatalysts and bulk semiconductors. We developed an experimental technique, dual-working-electrode (DWE) photoelectrochemistry, allowing for direct electrical measurement of the SC-EC interface in situ. We also developed the first theory of the SC|EC interface and applied the theory through numerical simulation to explain the measured interfacial charge transfer properties of the SC|EC junction. We discovered that porous, ion-permeable, redox-active catalysts such as Ni-(Fe) oxyhydroxides form so-called “adaptive” junctions where the effective interfacial barrier height for electron transfer depends on the charge state of the catalyst. This is in sharp contrast to interface properties of dense ion-impermeable catalysts, which we found form buried junctions that could be described by simple equivalent electrical circuits. These results elucidated a design principle for catalyzed photoelectrodes - high-performance photoelectrodes with direct SC|EC junctions use soft deposition techniques that yield ion-permeable catalysts. This work thus provides a foundation for the development of improved photoelectrodes that are practically relevant because they provide a mechanism to directly convert and store solar energy in the form of hydrogen gas, a renewable chemical fuel.

08 HYDROGEN↗

Active and Durable PGM-free Cathodic Electrocatalysts for Fuel Cell Application

Platinum Group Metal-free (PGM-free) Oxygen Reduction Reaction (ORR) electrocatalysts possess high intrinsic activity measured by a Rotating Disk Electrode (RDE) method. However, under fuel cell operating conditions, PGM-free ORR electrocatalysts have underperformed compared to platinum catalysts. PGM-free ORR electrocatalyst’s fuel cell performance can be improved by designing and optimizing the cathodic catalyst layer (CL) and Membrane Electrode Assembly (MEA) construction such that: 1) it efficiently provides oxygen access to ORR active sites (through catalyst morphology control); 2) it removes water from the CL (by tuning the hydrophobicity of the PGM-free catalysts and the catalyst layer structure); and 3) it increases proton conductivity (by homogeneous mixing of catalysts and ionomer). Studying the CL is complex due to the absence of well-established protocols of MEA activation, especially compared to platinum-containing catalysts. PGM-free fuel cell testing protocols would need to optimize potentiostatic vs galvanostatic measurements, scan rates, parameters of Electrochemical Impedance Spectroscopy (EIS) and Beginning of Experiment (BOE) criteria. To make the PGM-free catalyst’s fuel cell performance comparable to platinum, the synergistic effort of materials design, fine tuning of the catalyst layer and comprehensive electrochemical analysis is required.

08 HYDROGEN↗

Preparation and evaluation of advanced electrocatalysts for phosphoric acid fuel cells

Alloy electrocatalysts on carbon supports were developed for hydrogen oxidation in the presence of carbon monoxide. These electrocatalysts match the best platinum on carbon catalysts for performance yet cost half as much. The results demonstrate that a significant reduction in anode electrocatalyst material cost can be achieved by replacing the platinum. Since surface characterization of this catalyst is important to explain its performance, several approaches and pitfalls to the elucidation of the surface characterization are presented.

Stonehart, P.↗

High-surface-area, dual-function oxygen electrocatalysts for space power applications

The processes of hydration/dehydration and carbonation/decarbonation are investigated as an approach to provide higher surface area mixed metal oxides that are more active electrochemically. These materials are candidates for use as electrocatalysts and electrocatalyst supports for alkaline electrolyzers and fuel cells. For the case of the perovskite, LaCoO3 , higher surface areas were achieved with no change in structure and a more active oxygen electrocatalyst.

Ham, David O.↗

Electrocatalysts, and fuel cells containing them

Provided are electrocatalysts, fuel cells, methods of making fuel cells, and methods of generating an electric current, each featuring a platinum (Pt)-containing substrate in contact with an aqueous solution comprising Pb2+. Electrocatalysts of the invention are formed via underpotential deposition (UPD) when a trace amount of Pb2+ is present in the electrolyte of a half anodic cell for oxidizing formic acid using Pt as the anode. Surprisingly, the UPD process dramatically enhances the activity of formic acid oxidation, at least as much as 10-fold compared with palladium (Pd) black. In an embodiment, the electrocatalyst comprises a Pt-containing substrate, a submonolayer of lead (Pb) adsorbed onto the Pt-containing substrate, and an aqueous solution comprising Pb2+, wherein the concentration of Pb2+ in the aqueous solution is 10 to 500 μm.

30 DIRECT ENERGY CONVERSION↗

Electrocatalyst comprising a crumpled transition metal dichalcogenide support loaded with monodispersed metal nanoparticles

An electrocatalyst comprises a crumpled transition metal dichalcogenide support loaded with catalytic metal nanoparticles through spontaneous reduction reactions. The support can be prepared by hydrothermal conversion of 2D nanosheets to 3D hierarchically crumpled sheets. As an example, using crumpled MoS 2 as a support, highly tunable Ru loadings were obtained using the electrostatic interaction between MoS 2 and RuCl 3 in solution. Control over Ru loading was leveraged to produce Ru—MoS 2 electrocatalysts that demonstrate different nitrogen reduction reaction activities, and which show varying resistance to electrochemical sintering and deactivation. Further, these high surface area materials can be utilized for many applications, including electrocatalysts, supercapacitors, and batteries.

Percival, Stephen↗

Xerogel-Derived Ni Electrocatalysts for the Hydrogen Evolution Reaction in Alkaline Media

Anion exchange membrane water electrolyzers (AEMWEs) represent a promising technology for hydrogen production. The big advantage of the technology is that it allows for the use of platinum group metal-free (PGM-free) electrocatalysts at both electrodes, including catalysts for the hydrogen evolution reaction (HER) at the cathode. In addition to fulfilling the cost requirement, PGM-free HER catalysts need to meet the activity and durability targets of the AEMWEs. Here, in this work, we developed several carbon-supported, xerogel-derived nickel (Ni) HER electrocatalysts and evaluated the effect of various synthesis conditions, such as the type of carbon support, Ni-to-carbon ratio, and heat-treatment temperature and time, on their performance. Scanning transmission electron microscopy combined with energy-dispersive X-ray spectroscopy (STEM-EDS), X-ray diffraction spectroscopy (XRD), and X-ray photoelectron spectroscopy (XPS) revealed the formation of Ni nanoparticles with an oxygen-rich layer on the outside. Durability of the best-performing catalyst was assessed via a constant-current hold at 10 mA cm –2 over 100 h. This catalyst was found to be more active and durable than the reference PGM-free material, a commercial Ni catalyst supported on a Vulcan XC-72. The catalyst was also tested in the cathode of a fully PGM-free AEMWE, allowing to reach 1.90 V (1.84 V HFR-free) at 1 A cm –2 at 80 °C.

08 HYDROGEN↗

Chapter 7: Recent Advances in Electrocatalysts for Hydrogen Oxidation Reaction in Alkaline Electrolytes

The recent development in electrocatalysts for the hydrogen oxidation reaction (HOR) attracted significant attention. In this sense, this chapter provides a fundamental understanding of the state-of-the-art PGM and non-PGM-based electrocatalysts for the HOR in alkaline conditions. Moreover, a strong focus has been made on the strategies to overcome the slow kinetics of the HOR to commercialize anion-exchange membrane fuel cells.

anion-exchange membrane↗

Hierarchical Thiospinel NiCo 2 S 4 /Polyaniline Hybrid Nanostructures as a Bifunctional Electrocatalyst for Highly Efficient and Durable Overall Water Splitting

The development of a nonprecious, stable, and highly effective electrocatalyst for decomposition of water into oxygen and hydrogen is vitally important for sustainable energy conversion, but it still remains challenging to replace the noble metal electrocatalysts with more economically viable alternatives. Here, in this paper, a polyaniline (PANI) decorated hierarchical nickel cobalt thiospinel (NiCo 2 S 4 ) hybrid catalyst (NCS-P) has been developed that shows enhanced dual catalytic activity for both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER) compared to pristine NiCo 2 S 4 (NCS). Benefiting from the conductive PANI coating, the hierarchical NCS-P nanostructure exhibits outstanding electrocatalytic activity in alkaline solution with low overpotentials of 273 ± 3 and 77 ± 4 mV at 10 mA cm -2 and low Tafel slopes of 42.2 and 68.5 mV dec -1 for OER and HER, respectively, which are better than those of the benchmark noble-metal-based RuO 2 and Pt/C.

36 MATERIALS SCIENCE↗

Effect of Componential Proportion in Bimetallic Electrocatalysts on the Aprotic Lithium-Oxygen Battery Performance

Rechargeable lithium-oxygen (Li-O 2 ) batteries are one of the most promising technologies for next-generation energy storage, which is also a critical part of the future renewable energy portfolio; however, its commercialization is still hindered by several challenges. The high charge overpotential, in particular, not only causes problems by increasing the possibility of electrolyte decomposition but also induces a low round-trip efficiency and coulombic efficiency. Here, by choosing the right component proportion in Pt-Cu bimetallic electrocatalysts that optimize electrocatalytic activity of electrochemical reactions, especially of oxygen evolution reactions, a superior electrochemical behavior is demonstrated, with a low charge overpotential of 0.2 V and cycleability of 50 discharge/charge cycles before capacity fading. In conclusion, the optimized Pt-Cu bimetallic electrocatalysts significantly reduce the charge overpotential and furthermore enhance the efficiency, stability, and cycleability of an aprotic Li-O 2 battery.

25 ENERGY STORAGE↗

Degradation of Bimetallic Model Electrocatalysts ___ an in situ XAS Study

One of the major challenges in the development of clean energy fuel cells is the performance degradation of the electrocatalyst, which, apart from poisoning effects, can suffer from corrosion due to its exposure to a harsh environment under high potentials. In this communication, we demonstrate how interactions of Pt with a transition metal support affect not only, as commonly intended, the catalytic activity, but also the reactivity of Pt towards oxide formation or dissolution. We use two well-defined single-crystal model systems, Pt/Rh(111) and Pt/Au(111) and a unique x-ray spectroscopy technique with enhanced energy resolution to monitor the potential-dependent oxidation state of Pt, and find two markedly different oxidation mechanisms on the two different substrates. This information can be of great significance for future design of more active and more stable catalysts. We have studied the potential-induced degradation of Pt monolayer model electrocatalysts on Rh(111) and Au(111) single-crystal substrates. The anodic formation of Pt oxides was monitored using in situ high energy resolution fluorescence detection x-ray absorption spectroscopy (HERFD XAS). Although Pt was deposited on both substrates in a three-dimensional island growth mode, we observed remarkable differences during oxide formation that can only be understood in terms of strong Pt-substrate interactions throughout the Pt islands. Anodic polarization of Pt/Rh(111) up to +1.6 V vs. RHE (reversible hydrogen electrode) leads to formation an incompletely oxidized passive layer, whereas formation of PtO2 and partial Pt dissolution is observed for Pt/Au(111).

08 HYDROGEN↗

Enhancing Oxygen Reduction Activity of Pt-based Electrocatalysts: From Theoretical Mechanisms to Practical Methods

Pt-based electrocatalysts are considered as one of the most promising choices to facilitate the oxygen reduction reaction (ORR), and the key factor enabling their success is to reduce the required amount of platinum. Herein, we focus on illuminating both the theoretical mechanisms which enable enhanced and sustained ORR activity and the practical methods to achieve them in catalysts. The various multi-step pathways of ORR are firstly reviewed and the rate-determining steps based on the reaction intermediates and their binding energies are analyzed. We then explain the critical aspects of Pt-based electrocatalysts to tune oxygen reduction properties from the viewpoints of active sites exposure and altering the surface electronic structure, and further summarize representative research progress towards practically achieving these activity enhancements with a focus on platinum size reduction, shape control and core Pt elimination methods. Finally, we outline the remaining challenges and provide our perspectives with regard to further enhancing their activities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metal Doping Regulates Electrocatalysts Restructuring During Oxygen Evolution Reaction

High-efficiency and low-cost catalysts for oxygen evolution reaction (OER) are critical for electrochemical water splitting to generate hydrogen, which is a clean fuel for sustainable energy conversion and storage. Among the emerging OER catalysts, transition metal dichalcogenides have exhibited superior activity compared to commercial standards such as RuO 2 , but inferior stability due to uncontrolled restructuring with OER. Here, in this study, we create bimetallic sulfide catalysts by adapting the atomic ratio of Ni and Co in Co x Ni 1-x S y electrocatalysts to investigate the intricate restructuring processes. Surface-sensitive X-ray photoelectron spectroscopy and bulk-sensitive X-ray absorption spectroscopy confirmed the favorable restructuring of transition metal sulfide material following OER processes. Our results indicate that a small amount of Ni substitution can reshape the Co local electronic structure, which regulates the restructuring process to optimize the balance between OER activity and stability. This work represents a significant advancement in the development of efficient and noble metal-free OER electrocatalysts through a doping-regulated restructuring approach.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cobalt-polypyrrole-carbon black (Co-PPY-CB) Electrocatalysts for the Oxygen Reduction Reaction (ORR) in Fuel Cells: Composition and Kinetic Activity

Electrocatalysts consisting of polypyrrole (PPY) and Co deposited on carbon black (CB) at several compositions were prepared and tested for the oxygen reduction reaction (ORR) in a HClO4 buffer (pH = 1) using a rotating ring-disk electrode (RRDE). It was determined that the most favorable catalyst composition (prior to calcination) had a CB:PPY weight ratio of 2 and a pyrrole:Co (i.e., PY:Co) molar ratio of 4. This catalyst had an onset potential of 0.785 V (vs. RHE) and a mass activity of ca. 1 A/g{sub cata} at the fuel cell relevant voltage of 0.65 V. Furthermore, it was found that the number of electrons exchanged during the ORR with the catalyst was ca. 3.5 and resulted in 28% yield of H{sub 2}O{sub 2} at 0.65 V, which hints to an indirect 4e{sup -} reduction of O{sub 2} to H{sub 2}O, with H{sub 2}O{sub 2} as an intermdiate. From energy dispersive spectroscopy (EDS) and extended X-ray absorption fine structure (EXAFS) analysis, it is proposed that a PY:Co ratio of 4 favors the formation, prior to calcination, in the catalyst precursor of Co-N complexes in which Co is coordinated to 3 or 4 N atoms, resulting in strong Co-N interactions that limit the formation upon calcination of low ORR activity Co nanoparticles. These Co-N complexes give rise upon calcination to CoN{sub x-2} sites in which the coordination of Co could favor the adsorption on them of O{sub 2}, which would make those sites particularly active and selective. At the same mass acitivity of 1 A/g{sub cata}, the voltage yielded by the catalyst was 200 mV lower than that for a state-of-the-art Pt (10 wt.%) catalyst, whoch H{sub 2}O{sub 2} output at 0.85 V was 39% and involves the exchange of 3.2 e{sup -}, overall making our material an attractive substitute to noble metal ORR electrocatalysts.

04 OIL SHALES AND TAR SANDS↗

Ni(OH) 2 -free NiCu as a hydrogen evolution and oxidation electrocatalyst

In this work, we investigate the role of the nickel surface oxidation and the use of additional reducing agent in the synthesis process in the electrochemical activity of NiCu electrocatalysts for hydrogen oxidation reaction and hydrogen evolution reaction. In addition, the role of the carbon support morphology is also investigated: two different supports, DENKA black and Ketjenblack with widely different properties (specific surface, proportion of low strain carbons, etc.) are studied, and no difference are observed in their electrochemical activity. However, the use 4-aminoantipyrine as a reducing agent resulted in a dramatic increase in non-oxidized Ni at the electrocatalyst’ surface, concomitant to a large increase in its activity for both the hydrogen evolution and oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing individual single atom electrocatalyst sites by advanced analytical scanning transmission electron microscopy

Single atom electrocatalysts (SAEs) are promising next-generation materials for promoting a variety of important reactions, such as the oxygen reduction, nitrogen reduction, and CO 2 reduction reactions. While bulk characterization techniques such as X-ray absorption spectroscopy and Mössbauer spectroscopy have significantly enhanced our understanding of these catalysts, direct probing of individual single metal atom sites at the atomic scale is necessary to understand local variations in the properties of these sites and accelerate design and synthesis of improved SAEs. Aberration-corrected scanning transmission electron microscopy (STEM) has become a powerful tool for providing this type of atomic-scale information about SAE metal sites. These sites are typically unstable under the electron beam, however, which, in combination with conventional acquisition methods and detectors, has limited the type and quantity of information obtainable by spectroscopic STEM techniques. Here, we map multiple individual SAE metal sites in a nitrogen-doped carbon containing atomically dispersed Fe and Re (FeReNC) at the atomic scale by direct electron detection electron energy-loss spectroscopy (EELS). Direct electron detection provides an improved signal-to-noise ratio over conventional scintillator-based detectors and enables detection and real space localization of weak signals. In addition, we demonstrate an automated method for identification of metal atom positions, placement of the probe on these sites, and simultaneous EELS and energy dispersive X-ray spectroscopic (EDS) signal acquisition. This simultaneous acquisition of EELS and EDS provides access to the composition and bonding of a wide range of SAE metal sites. In this study, focusing the probe directly on the metal sites also increases the relevant data acquisition rate by more than an order of magnitude over two-dimensional mapping, enabling improved statistical measurements of site properties. The versatility, sensitivity, and speed that these techniques provide enhances our ability to probe the local elemental and chemical environment of a large number of individual SAE metal site structures at the atomic scale, enabling an improved understanding of the variations in the local properties of these electrocatalysts to be gained. As a result, significantly increased information about individual metal sites will be available to future electrochemical studies through these techniques, accelerating the development of advanced SAEs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Platinum-monolayer Electrocatalysts: Palladium Interlayer on IrCo Alloy Core Improves Activity in Oxygen-reduction Reaction

We describe the synthesis and electrocatalytic properties of a new low-Pt electrocatalyst consisting of an IrCo core, a Pd interlayer, and a surface Pt monolayer, emphasizing the interlayer's role in improving electrocatalytic activity for the oxygen-reduction reaction on Pt in HClO{sub 4} solution. We prepared the IrCo alloys by decomposing, at 800 C, hexacyanometalate, KCoIr(CN){sub 6}, adsorbed on the carbon surfaces. The synthesis of Ir{sub 3}Co/C involved heating a mix of metal salts and carbon in hydrogen at 500 C. Thereafter, we placed a palladium and/or platinum monolayer on them via the galvanic displacement of an underpotentially deposited copper monolayer. The electrocatalysts were characterized using structural- and electrochemical-techniques. For PtML/PdML/IrCo/C, we observed a Pt mass activity of 1.18 A/mg{sub (Pt)} and the platinum-group-metals mass of 0.16 A/mg{sub (Pt, Pd, Ir)}. In comparison, without a Pd interlayer, i.e., Pt{sub ML}/IrCo/C, the activities of 0.15 A/mg{sub (Pt)} and 0.036 A/mg{sub (Pt, Pd, Ir)} were considerably lower. We consider that the palladium interlayer plays an essential role in achieving high catalytic activity by adjusting the electronic interaction of the platinum monolayer with the IrCo core, so that it accelerates the kinetics of adsorption and desorption of the intermediates of oxygen reduction. A similar trend was observed for Pt{sub ML}/Pd{sub ML} and Pt{sub ML} deposited on Ir{sub 3}Co/C alloy core. We used density functional theory to interpret the observed phenomena.

08 HYDROGEN↗

K{sub 1.33}Mn{sub 8}O{sub 16} as an electrocatalyst and a cathode

Density functional theory (DFT) calculations are carried out to investigate the electronic, magnetic and thermoelectric properties of bulk and nanosheet K{sub 1.33}Mn{sub 8}O{sub 16} materials. The catalytic activity and cathodic performance of bulk and nanosheet structures are examined using the Tran-Blaha modified Becke-Johnson (TB-mBJ) exchange potential. Electronic structure calculations reveal an anti-ferromagnetic ground state, with a TB-mMBJ band gap in bulk K{sub 1.33}Mn{sub 8}O{sub 16} that is in agreement with experimental results. Density of state plots indicate a partial reduction of Mn{sup 4+} ions to Mn{sup 3+}, without any obvious sign of Jahn-Teller distortion. Moreover, use of the O p-band center as a descriptor of catalytic activity suggests that the nanosheet has enhanced catalytic activity compared to the bulk structure. Thermoelectric parameters such as the Seebeck coefficient, electrical conductivity, and thermal conductivity are also calculated, and it is found that the Seebeck coefficients decrease with increasing temperature. High Seebeck coefficients for both spin-up and spin-down states are found in the nanosheet relative to their value in the bulk K{sub 1.33}Mn{sub 8}O{sub 16} structure, whereas the electrical and thermal conductivity are reduced relative to the bulk. In addition, figures of merit values are calculated as a function of the chemical potential and it is found that the nanosheet has a figure of merit of ~1 at room temperature, compared to 0.5 for the bulk material. All results suggest that K{sub 1.33}Mn{sub 8}O{sub 16} nanosheets can be used both as a material in waste heat recovery and as an electrocatalyst in fuel cells and batteries. - Graphical abstract: K{sub 1.33}Mn{sub 8}O{sub 16}: bulk and nanosheet. - Highlights: • Electronic properties of bulk and nanosheet forms of K{sub 1.33}Mn{sub 8}O{sub 16} have been studied. • The K{sub 1.33}Mn{sub 8}O{sub 16} nanosheet is a semiconductor while the bulk is a metal. • K{sub 1.33}Mn{sub 8}O{sub 16} Nanosheet is a more efficient electrocatalyst than bulk K{sub 1.33}Mn{sub 8}O{sub 16}. • High figure of merit of K{sub 1.33}Mn{sub 8}O{sub 16} nanosheet makes it an efficient cathode.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗